Re: [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data
On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote: Add usb otg data node in omap4/omap3 device tree file. Also update the node with board specific setting in omapx-board.dts file. Signed-off-by: Kishon Vijay Abraham Ikis...@ti.com --- arch/arm/boot/dts/omap3-beagle.dts |6 ++ arch/arm/boot/dts/omap3-evm.dts|6 ++ arch/arm/boot/dts/omap3.dtsi |8 arch/arm/boot/dts/omap4-panda.dts |6 ++ arch/arm/boot/dts/omap4-sdp.dts|6 ++ arch/arm/boot/dts/omap4.dtsi |8 6 files changed, 40 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 5b4506c..f3d7076 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -67,3 +67,9 @@ mmc3 { status = disable; }; + +usb_otg_hs { + interface_type =0; + mode =3; + power =50; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 2eee16e..8963b3d 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -18,3 +18,9 @@ reg =0x8000 0x1000; /* 256 MB */ }; }; + +usb_otg_hs { + interface_type =0; + mode =3; + power =50; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 99474fa..2f565d6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -215,5 +215,13 @@ compatible = ti,omap3-hsmmc; ti,hwmods = mmc3; }; + + usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = ti,musb-omap2430; this compatible doesn't seem right in omap3.dtsi. Same with the below entry in omap4.dtsi. See other IP blocks which are reused across OMAP2/3/4 on how the compatible for those are handled. + ti,hwmods = usb_otg_hs; + multipoint =1; + num_eps =16; + ram_bits =12; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 1efe0c5..0825fa7 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -89,3 +89,9 @@ ti,non-removable; bus-width =4; }; + +usb_otg_hs { + interface_type =1; + mode =3; + power =50; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index d08c4d1..5244d51 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -158,3 +158,9 @@ bus-width =4; ti,non-removable; }; + +usb_otg_hs { + interface_type =1; + mode =3; + power =50; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 4d2dcc1..bc7b3c3 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -285,5 +285,13 @@ 0x4a002300 0x1; }; }; + + usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = ti,musb-omap2430; + ti,hwmods = usb_otg_hs; + multipoint =1; + num_eps =16; + ram_bits =12; + }; }; }; -- To unsubscribe from this list: send the line unsubscribe linux-usb in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data
Hi, On Tue, Jul 10, 2012 at 11:57 AM, Rajendra Nayak rna...@ti.com wrote: On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote: Add usb otg data node in omap4/omap3 device tree file. Also update the node with board specific setting in omapx-board.dts file. Signed-off-by: Kishon Vijay Abraham Ikis...@ti.com --- arch/arm/boot/dts/omap3-beagle.dts |6 ++ arch/arm/boot/dts/omap3-evm.dts|6 ++ arch/arm/boot/dts/omap3.dtsi |8 arch/arm/boot/dts/omap4-panda.dts |6 ++ arch/arm/boot/dts/omap4-sdp.dts|6 ++ arch/arm/boot/dts/omap4.dtsi |8 6 files changed, 40 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 5b4506c..f3d7076 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -67,3 +67,9 @@ mmc3 { status = disable; }; + +usb_otg_hs { + interface_type =0; + mode =3; + power =50; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 2eee16e..8963b3d 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -18,3 +18,9 @@ reg =0x8000 0x1000; /* 256 MB */ }; }; + +usb_otg_hs { + interface_type =0; + mode =3; + power =50; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 99474fa..2f565d6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -215,5 +215,13 @@ compatible = ti,omap3-hsmmc; ti,hwmods = mmc3; }; + + usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = ti,musb-omap2430; this compatible doesn't seem right in omap3.dtsi. Same with the below entry in omap4.dtsi. See other IP blocks which are reused across OMAP2/3/4 on how the compatible for those are handled. Ok. So it should be like *ti,omap4-musb*, *ti,omap3-musb*? Thanks Kishon -- To unsubscribe from this list: send the line unsubscribe linux-usb in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data
On Tuesday 10 July 2012 01:43 PM, ABRAHAM, KISHON VIJAY wrote: Hi, On Tue, Jul 10, 2012 at 11:57 AM, Rajendra Nayakrna...@ti.com wrote: On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote: Add usb otg data node in omap4/omap3 device tree file. Also update the node with board specific setting in omapx-board.dts file. Signed-off-by: Kishon Vijay Abraham Ikis...@ti.com --- arch/arm/boot/dts/omap3-beagle.dts |6 ++ arch/arm/boot/dts/omap3-evm.dts|6 ++ arch/arm/boot/dts/omap3.dtsi |8 arch/arm/boot/dts/omap4-panda.dts |6 ++ arch/arm/boot/dts/omap4-sdp.dts|6 ++ arch/arm/boot/dts/omap4.dtsi |8 6 files changed, 40 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 5b4506c..f3d7076 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -67,3 +67,9 @@ mmc3 { status = disable; }; + +usb_otg_hs { + interface_type =0; + mode =3; + power =50; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 2eee16e..8963b3d 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -18,3 +18,9 @@ reg =0x8000 0x1000; /* 256 MB */ }; }; + +usb_otg_hs { + interface_type =0; + mode =3; + power =50; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 99474fa..2f565d6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -215,5 +215,13 @@ compatible = ti,omap3-hsmmc; ti,hwmods = mmc3; }; + + usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = ti,musb-omap2430; this compatible doesn't seem right in omap3.dtsi. Same with the below entry in omap4.dtsi. See other IP blocks which are reused across OMAP2/3/4 on how the compatible for those are handled. Ok. So it should be like *ti,omap4-musb*, *ti,omap3-musb*? Yes, that would be more appropriate. Thanks Kishon -- To unsubscribe from this list: send the line unsubscribe linux-usb in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html