Re: [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
Hi Julius,
On 11/07/2014 06:11 AM, Julius Werner wrote:
On Wed, Nov 5, 2014 at 5:30 PM, Kever Yang kever.y...@rock-chips.com wrote:
Hcd controller needs bus_suspend/resume, dwc2 controller make
root hub generate suspend/resume signal with hprt0 register
when work in host mode.
After the root hub enter suspend, we can make controller enter
low power state with PCGCTL register.
You say you do this, but I don't actually see you doing it (for the
not-connected case)?
Agree to add PCGCTL operation for the not-connected case.
We also update the lx_state for hsotg state.
This patch has tested on rk3288 with suspend/resume.
Signed-off-by: Kever Yang kever.y...@rock-chips.com
---
Changes in v2:
- update commit message
- make dwc2 suspend/resume sourcecode work
drivers/usb/dwc2/hcd.c | 78 +++---
1 file changed, 67 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 0a0e6f0..01a415b 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1471,6 +1471,30 @@ static void dwc2_port_suspend(struct dwc2_hsotg *hsotg,
u16 windex)
}
}
+static void dwc2_port_resume(struct dwc2_hsotg *hsotg)
+{
+ u32 hprt0;
+
+ /* After clear the Stop PHY clock bit, we should wait for a moment
+* for PLL work stable with clock output.
+*/
+ writel(0, hsotg-regs + PCGCTL);
+ usleep_range(2000, 4000);
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_RES;
+ writel(hprt0, hsotg-regs + HPRT0);
+ hprt0 = ~HPRT0_SUSP;
+ /* according to USB2.0 Spec 7.1.7.7, the host must send the resume
+* signal for at least 20ms
+*/
+ usleep_range(2, 25000);
+
+ hprt0 = ~HPRT0_RES;
+ writel(hprt0, hsotg-regs + HPRT0);
+ hsotg-lx_state = DWC2_L0;
+}
+
/* Handles hub class-specific requests */
static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
u16 wvalue, u16 windex, char *buf, u16 wlength)
@@ -1516,17 +1540,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg
*hsotg, u16 typereq,
case USB_PORT_FEAT_SUSPEND:
dev_dbg(hsotg-dev,
ClearPortFeature USB_PORT_FEAT_SUSPEND\n);
- writel(0, hsotg-regs + PCGCTL);
- usleep_range(2, 4);
-
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_RES;
- writel(hprt0, hsotg-regs + HPRT0);
- hprt0 = ~HPRT0_SUSP;
- usleep_range(10, 15);
-
- hprt0 = ~HPRT0_RES;
- writel(hprt0, hsotg-regs + HPRT0);
I'm curious why this didn't change lx_state back to DWC2_L0 before...
Paul, do you know?
+ dwc2_port_resume(hsotg);
break;
case USB_PORT_FEAT_POWER:
@@ -2299,6 +2313,44 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
usleep_range(1000, 3000);
}
+static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L0)
What if the port is in L1 state? I don't think the driver supports LPM
right now, but the DWC2_L1 enum is defined so it may one day in the
future. Let's maybe at least add a TODO.
Added
+ return 0;
In your original ChromiumOS version of this patch, you also set
PCGCTL_STOPPCLK here if the port was not connected. Is there a reason
that changed (does it not actually save power or something)?
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if (hprt0 HPRT0_CONNSTS)
+ dwc2_port_suspend(hsotg, 1);
The contract for bus_suspend() is that it will suspend all ports not
yet suspended, keep track of those ports and then only resume those in
bus_resume() (compare, for example, how XHCI keeps track of that with
xhci_bus_state.bus_suspended in xhci_bus_suspend/resume()). So you
need something here to remember whether this function suspended the
port or whether it had already been suspended, and then only resume
the port in bus_resume() in the former case.
In fact, the dwc2 controller only support one port, so the hprt0
is the only one port we need to care.
Note that
dwc2_port_suspend() changes lx_state to DWC_L2 (at least in the
version I'm looking at right now), so you can't just rely on that
unless you explicitly set it back to something else here.
+
+ return 0;
+}
+
+static int _dwc2_hcd_resume(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state ==
Re: [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
The contract for bus_suspend() is that it will suspend all ports not yet suspended, keep track of those ports and then only resume those in bus_resume() (compare, for example, how XHCI keeps track of that with xhci_bus_state.bus_suspended in xhci_bus_suspend/resume()). So you need something here to remember whether this function suspended the port or whether it had already been suspended, and then only resume the port in bus_resume() in the former case. In fact, the dwc2 controller only support one port, so the hprt0 is the only one port we need to care. Yes, I know, but that one port still needs to play by the rules the USB core expects. All I'm saying is: if the port was already suspended during bus_suspend(), then the next bus_resume() should not resume it. The rest looks good to me now. But in order to get it really working, I think we'll still need the actual driver.pm suspend/resume methods, at least for the HCD_FLAG_HW_ACCESSIBLE and the usb_root_hub_lost_power() handling (probably better in a separate patch). -- To unsubscribe from this list: send the line unsubscribe linux-usb in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
Hi Kever,
2014-11-06 2:30 GMT+01:00 Kever Yang kever.y...@rock-chips.com:
+static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L0)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if (hprt0 HPRT0_CONNSTS)
+ dwc2_port_suspend(hsotg, 1);
+
+ return 0;
+}
+
+static int _dwc2_hcd_resume(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L2)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if ((hprt0 HPRT0_CONNSTS) (hprt0 HPRT0_SUSP))
+ dwc2_port_resume(hsotg);
+
+ return 0;
+}
Could you also define these functions under #ifdef CONFIG_PM ?
Thanks.
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
On Thu, Nov 06, 2014 at 06:21:42PM +0100, Romain Perier wrote:
Hi Kever,
2014-11-06 2:30 GMT+01:00 Kever Yang kever.y...@rock-chips.com:
+static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L0)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if (hprt0 HPRT0_CONNSTS)
+ dwc2_port_suspend(hsotg, 1);
+
+ return 0;
+}
+
+static int _dwc2_hcd_resume(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L2)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if ((hprt0 HPRT0_CONNSTS) (hprt0 HPRT0_SUSP))
+ dwc2_port_resume(hsotg);
+
+ return 0;
+}
Could you also define these functions under #ifdef CONFIG_PM ?
please don't. I'm actually considering ripping all ifdefs from all these
drivers and also stop using SIMPLE_DEV_PM_OPS or any of its friends.
There's really nobody today would would build a kernel with CONFIG_PM.
--
balbi
signature.asc
Description: Digital signature
RE: [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
From: Felipe Balbi [mailto:ba...@ti.com]
Sent: Thursday, November 06, 2014 9:40 AM
On Thu, Nov 06, 2014 at 06:21:42PM +0100, Romain Perier wrote:
2014-11-06 2:30 GMT+01:00 Kever Yang kever.y...@rock-chips.com:
+static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L0)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if (hprt0 HPRT0_CONNSTS)
+ dwc2_port_suspend(hsotg, 1);
+
+ return 0;
+}
+
+static int _dwc2_hcd_resume(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L2)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if ((hprt0 HPRT0_CONNSTS) (hprt0 HPRT0_SUSP))
+ dwc2_port_resume(hsotg);
+
+ return 0;
+}
Could you also define these functions under #ifdef CONFIG_PM ?
please don't. I'm actually considering ripping all ifdefs from all these
drivers and also stop using SIMPLE_DEV_PM_OPS or any of its friends.
There's really nobody today would would build a kernel with CONFIG_PM.
I'm sure Felipe meant *without* CONFIG_PM.
Kever, in that case you should remove the #ifdef CONFIG_PM around the
.bus_suspend and .bus_resume assignments also, otherwise there will be
compiler warnings when built without CONFIG_PM. After that, you can
add my acked-by.
--
Paul
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
Hi,
On Thu, Nov 06, 2014 at 06:35:53PM +, Paul Zimmerman wrote:
From: Felipe Balbi [mailto:ba...@ti.com]
Sent: Thursday, November 06, 2014 9:40 AM
On Thu, Nov 06, 2014 at 06:21:42PM +0100, Romain Perier wrote:
2014-11-06 2:30 GMT+01:00 Kever Yang kever.y...@rock-chips.com:
+static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L0)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if (hprt0 HPRT0_CONNSTS)
+ dwc2_port_suspend(hsotg, 1);
+
+ return 0;
+}
+
+static int _dwc2_hcd_resume(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L2)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if ((hprt0 HPRT0_CONNSTS) (hprt0 HPRT0_SUSP))
+ dwc2_port_resume(hsotg);
+
+ return 0;
+}
Could you also define these functions under #ifdef CONFIG_PM ?
please don't. I'm actually considering ripping all ifdefs from all these
drivers and also stop using SIMPLE_DEV_PM_OPS or any of its friends.
There's really nobody today would would build a kernel with CONFIG_PM.
I'm sure Felipe meant *without* CONFIG_PM.
oops, that's correct.
Kever, in that case you should remove the #ifdef CONFIG_PM around the
.bus_suspend and .bus_resume assignments also, otherwise there will be
compiler warnings when built without CONFIG_PM. After that, you can
add my acked-by.
tks
--
balbi
signature.asc
Description: Digital signature
Re: [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
On Wed, Nov 5, 2014 at 5:30 PM, Kever Yang kever.y...@rock-chips.com wrote:
Hcd controller needs bus_suspend/resume, dwc2 controller make
root hub generate suspend/resume signal with hprt0 register
when work in host mode.
After the root hub enter suspend, we can make controller enter
low power state with PCGCTL register.
You say you do this, but I don't actually see you doing it (for the
not-connected case)?
We also update the lx_state for hsotg state.
This patch has tested on rk3288 with suspend/resume.
Signed-off-by: Kever Yang kever.y...@rock-chips.com
---
Changes in v2:
- update commit message
- make dwc2 suspend/resume sourcecode work
drivers/usb/dwc2/hcd.c | 78
+++---
1 file changed, 67 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 0a0e6f0..01a415b 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1471,6 +1471,30 @@ static void dwc2_port_suspend(struct dwc2_hsotg
*hsotg, u16 windex)
}
}
+static void dwc2_port_resume(struct dwc2_hsotg *hsotg)
+{
+ u32 hprt0;
+
+ /* After clear the Stop PHY clock bit, we should wait for a moment
+* for PLL work stable with clock output.
+*/
+ writel(0, hsotg-regs + PCGCTL);
+ usleep_range(2000, 4000);
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_RES;
+ writel(hprt0, hsotg-regs + HPRT0);
+ hprt0 = ~HPRT0_SUSP;
+ /* according to USB2.0 Spec 7.1.7.7, the host must send the resume
+* signal for at least 20ms
+*/
+ usleep_range(2, 25000);
+
+ hprt0 = ~HPRT0_RES;
+ writel(hprt0, hsotg-regs + HPRT0);
+ hsotg-lx_state = DWC2_L0;
+}
+
/* Handles hub class-specific requests */
static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
u16 wvalue, u16 windex, char *buf, u16
wlength)
@@ -1516,17 +1540,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg
*hsotg, u16 typereq,
case USB_PORT_FEAT_SUSPEND:
dev_dbg(hsotg-dev,
ClearPortFeature USB_PORT_FEAT_SUSPEND\n);
- writel(0, hsotg-regs + PCGCTL);
- usleep_range(2, 4);
-
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_RES;
- writel(hprt0, hsotg-regs + HPRT0);
- hprt0 = ~HPRT0_SUSP;
- usleep_range(10, 15);
-
- hprt0 = ~HPRT0_RES;
- writel(hprt0, hsotg-regs + HPRT0);
I'm curious why this didn't change lx_state back to DWC2_L0 before...
Paul, do you know?
+ dwc2_port_resume(hsotg);
break;
case USB_PORT_FEAT_POWER:
@@ -2299,6 +2313,44 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
usleep_range(1000, 3000);
}
+static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L0)
What if the port is in L1 state? I don't think the driver supports LPM
right now, but the DWC2_L1 enum is defined so it may one day in the
future. Let's maybe at least add a TODO.
+ return 0;
In your original ChromiumOS version of this patch, you also set
PCGCTL_STOPPCLK here if the port was not connected. Is there a reason
that changed (does it not actually save power or something)?
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if (hprt0 HPRT0_CONNSTS)
+ dwc2_port_suspend(hsotg, 1);
The contract for bus_suspend() is that it will suspend all ports not
yet suspended, keep track of those ports and then only resume those in
bus_resume() (compare, for example, how XHCI keeps track of that with
xhci_bus_state.bus_suspended in xhci_bus_suspend/resume()). So you
need something here to remember whether this function suspended the
port or whether it had already been suspended, and then only resume
the port in bus_resume() in the former case. Note that
dwc2_port_suspend() changes lx_state to DWC_L2 (at least in the
version I'm looking at right now), so you can't just rely on that
unless you explicitly set it back to something else here.
+
+ return 0;
+}
+
+static int _dwc2_hcd_resume(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L2)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
[PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
Hcd controller needs bus_suspend/resume, dwc2 controller make
root hub generate suspend/resume signal with hprt0 register
when work in host mode.
After the root hub enter suspend, we can make controller enter
low power state with PCGCTL register.
We also update the lx_state for hsotg state.
This patch has tested on rk3288 with suspend/resume.
Signed-off-by: Kever Yang kever.y...@rock-chips.com
---
Changes in v2:
- update commit message
- make dwc2 suspend/resume sourcecode work
drivers/usb/dwc2/hcd.c | 78 +++---
1 file changed, 67 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 0a0e6f0..01a415b 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1471,6 +1471,30 @@ static void dwc2_port_suspend(struct dwc2_hsotg *hsotg,
u16 windex)
}
}
+static void dwc2_port_resume(struct dwc2_hsotg *hsotg)
+{
+ u32 hprt0;
+
+ /* After clear the Stop PHY clock bit, we should wait for a moment
+* for PLL work stable with clock output.
+*/
+ writel(0, hsotg-regs + PCGCTL);
+ usleep_range(2000, 4000);
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_RES;
+ writel(hprt0, hsotg-regs + HPRT0);
+ hprt0 = ~HPRT0_SUSP;
+ /* according to USB2.0 Spec 7.1.7.7, the host must send the resume
+* signal for at least 20ms
+*/
+ usleep_range(2, 25000);
+
+ hprt0 = ~HPRT0_RES;
+ writel(hprt0, hsotg-regs + HPRT0);
+ hsotg-lx_state = DWC2_L0;
+}
+
/* Handles hub class-specific requests */
static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
u16 wvalue, u16 windex, char *buf, u16 wlength)
@@ -1516,17 +1540,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg
*hsotg, u16 typereq,
case USB_PORT_FEAT_SUSPEND:
dev_dbg(hsotg-dev,
ClearPortFeature USB_PORT_FEAT_SUSPEND\n);
- writel(0, hsotg-regs + PCGCTL);
- usleep_range(2, 4);
-
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_RES;
- writel(hprt0, hsotg-regs + HPRT0);
- hprt0 = ~HPRT0_SUSP;
- usleep_range(10, 15);
-
- hprt0 = ~HPRT0_RES;
- writel(hprt0, hsotg-regs + HPRT0);
+ dwc2_port_resume(hsotg);
break;
case USB_PORT_FEAT_POWER:
@@ -2299,6 +2313,44 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
usleep_range(1000, 3000);
}
+static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L0)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if (hprt0 HPRT0_CONNSTS)
+ dwc2_port_suspend(hsotg, 1);
+
+ return 0;
+}
+
+static int _dwc2_hcd_resume(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg-op_state == OTG_STATE_B_HOST) ||
+ (hsotg-op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg-lx_state != DWC2_L2)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if ((hprt0 HPRT0_CONNSTS) (hprt0 HPRT0_SUSP))
+ dwc2_port_resume(hsotg);
+
+ return 0;
+}
+
/* Returns the current frame number */
static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd)
{
@@ -2669,6 +2721,10 @@ static struct hc_driver dwc2_hc_driver = {
.hub_status_data = _dwc2_hcd_hub_status_data,
.hub_control = _dwc2_hcd_hub_control,
.clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete,
+#ifdef CONFIG_PM
+ .bus_suspend = _dwc2_hcd_suspend,
+ .bus_resume = _dwc2_hcd_resume,
+#endif
};
/*
--
1.9.1
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
