From: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Enable HS-USB device for the Lager board, defining the GPIO that the driver
should check when probing. Since this board doesn't have the OTG ID pin, we
assume that GP5_18 (USB0_PWEN) is an ID pin because it is 1 when the SW5 is
in position 2-3 (meaning USB function) and 0 in other positions.
Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
[Sergei: added pin node and prop, moved device node, fixed summary, supplemented
changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
---
Changes in version 4:
- fixed pin node name;
- moved pin node before USB0's one.
Changes in version 3:
- added pin function/group and the pinctrl-related prop;
- moved the HS-USB node to precede the USB PHY node;
- uppercased "arm" in the summary;
- supplemented changelog.
arch/arm/boot/dts/r8a7790-lager.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7790-lager.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7790-lager.dts
+++ renesas/arch/arm/boot/dts/r8a7790-lager.dts
@@ -221,6 +221,11 @@
renesas,function = "iic3";
};
+ hsusb_pins: hsusb {
+ renesas,groups = "usb0_ovc_vbus";
+ renesas,function = "usb0";
+ };
+
usb0_pins: usb0 {
renesas,groups = "usb0";
renesas,function = "usb0";
@@ -425,6 +430,13 @@
pinctrl-names = "default";
};
+&hsusb {
+ status = "okay";
+ pinctrl-0 = <&hsusb_pins>;
+ pinctrl-names = "default";
+ renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
&usbphy {
status = "okay";
};
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
