RE: [PATCHv8] wlcore: spi: add wl18xx support

[Reizer, Eyal]

> 
> > Add support for using with both wl12xx and wl18xx.
> >
> > - all wilink family needs special init command for entering wspi mode.
> >   extra clock cycles should be sent after the spi init command while the
> >   cs pin is high.
> > - Use inverted chip select for sending a dummy 4 bytes command that
> >   completes the init stage.
> >
> > Signed-off-by: Eyal Reizer 
> > Acked-by: Rob Herring 
> > ---
> > v1->v2:update device tree bindings configuration
> > v2->v3:revert from manual gpio manipulation. use inverted chip select
> instead
> > for sending the extra init cycle which, achieves the same hardware purpose.
> > update device tree bindings docucmentation accordingly
> > v3->v4: Remove redundant data form binding documentation and fix chip
> select
> > number mismatch in wl1271 example
> > v4->v5: Rebase on top of head of wireless-drivers-next
> > v5->v6: Add ACKs
> > v6->v7: Mail format issues
> > v7->v8: Remove redundant varaible from wlcore_probe_of
> 
> I have already applied this patch, it's too late to send a new version.
> Now you need to send a new patch, on top of wireless-drivers-next, which
> removes the redundant variable.
> 
Understood. Will submit shortly

Best Regards,
Eyal
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv8] wlcore: spi: add wl18xx support

[Kalle Valo]

"Reizer, Eyal"  writes:

> Add support for using with both wl12xx and wl18xx.
>
> - all wilink family needs special init command for entering wspi mode.
>   extra clock cycles should be sent after the spi init command while the
>   cs pin is high.
> - Use inverted chip select for sending a dummy 4 bytes command that
>   completes the init stage.
>
> Signed-off-by: Eyal Reizer 
> Acked-by: Rob Herring 
> ---
> v1->v2:update device tree bindings configuration
> v2->v3:revert from manual gpio manipulation. use inverted chip select instead
> for sending the extra init cycle which, achieves the same hardware purpose.
> update device tree bindings docucmentation accordingly
> v3->v4: Remove redundant data form binding documentation and fix chip select
> number mismatch in wl1271 example
> v4->v5: Rebase on top of head of wireless-drivers-next
> v5->v6: Add ACKs
> v6->v7: Mail format issues
> v7->v8: Remove redundant varaible from wlcore_probe_of

I have already applied this patch, it's too late to send a new version.
Now you need to send a new patch, on top of wireless-drivers-next, which
removes the redundant variable.

-- 
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html