[linux-yocto][v5.10/standard/preempt-rt/cn-sdkv5.4/octeon][PATCH] Update the codes to sdk11.23.1
From: Wenlin Kang Hi Bruce This is for preempt-rt branch to upgrade to SDK11.23.1, Could you please help to merge below patches to the branch "v5.10/standard/preempt-rt/cn-sdkv5.4/octeon" The following changes since commit 10905ed4e39af54b87fd5e6dc9a8cc236c37ce41: Merge branch 'v5.10/standard/base' into v5.10/standard/preempt-rt/cn-sdkv5.4/octeon (2023-03-17 23:16:05 -0400) are available in the Git repository at: https://github.com/wkang2050/linux-yocto.git branch: v5.10/standard/preempt-rt/cn-sdkv5.4/octeon for you to fetch changes up to 0090f9765b5930c90c379fc4dcd2b153e3d61e1f: drivers: octeontx2-pcicons: adjust padding size to fix build error for RT (2023-03-24 17:44:50 +0800) Aaro Koskinen (1): fwlog: fix invalid pointers and copy size in wraparound case Aaron Tomlin (4): mm/vmstat: Add CPU-specific variable to track a vmstat discrepancy mm/vmstat: Use vmstat_dirty to track CPU-specific vmstat discrepancies tick/nohz_full: Ensure quiet_vmstat() is called on exit to user-mode when the idle tick is stopped tick/sched: Ensure quiet_vmstat() is called when the idle tick was stopped too Alex Leibovich (2): gpio: mvebu: add soc interrupt handling dtsi: gpio: mvebu: add AP GPIO interrupt Amit Singh Tomar (3): perf/marvell: add MBWC event perf/marvell: get ddr speed from "marvell,ddr-speed" perf/marvell: Update dev name in Marvell DDR PMU Ankur Dwivedi (4): octeontx2-af: mcs: set force clock enable octeontx2-af: mcs: add mailboxes for fips octeontx2-af: rvu: enable mcs fips mailboxes soc: marvell: hw_access: add mapping for mcs registers Baha Mesleh (7): octeontx2-bphy-netdev: Fix cpri interrupt handling octeontx2-bphy-netdev: re-enable cpri gpint when interface is stopped octeontx2-bphy-netdev: Fix cnf10k link state set octeontx2-bphy-netdev: Add cnf10k rfoe debugfs octeontx2-bphy-netdev: Use PTP ring tail index to read timestamp octeontx2-bphy-netdev: fix link carrier state update for cnf10k octeontx2-bphy-netdev: Fix rfoe ptp clock cleanup Bharat Bhushan (2): cn10k: Add workaround for MRVL TAD Errata-38891 octeontx2-pf: Detach LF resources on probe cleanup Chandrakala Chavva (5): driver: edac: octeontx: Rename some macros and variables driver: firmware: Fix kconfig dependencies on mhu driver driver: mmc: sdhci-cadence: Dump more PHY registers driver: mmc: sdhci: Fix parameter passed for reading phy register Revert "drivers: sdhci-cadence: Fix command delay" Christophe JAILLET (1): octeontx2-af: cn10k: mcs: Fix a resource leak in the probe and remove functions Damian Eppel (1): firmware: octeontx2: sfp-info: check supported platforms first Dan Carpenter (3): crypto: octeontx2 - out of bounds access in otx2_cpt_dl_custom_egrp_delete() crypto: octeontx2 - prevent underflow in get_cores_bmap() octeontx2-af: cn10k: mcs: Fix copy and paste bug in mcs_bbe_intr_handler() Geetha sowjanya (27): octeontx2-af: Apply errata workaround only to CN10K silicons octeontx2-pf: Free pending and dropped SQEs octeontx2-pf: Fix invalid pkt count send to dql_completed() octeontx2-af: cn10k: mcs: Add MCS basic driver support octeontx2-af: cn10k-b: mcs: Allocate structs for MCS resources octeontx2-af: cn10k-b: mcs: Mbox to allocate/free MCS resources octeontx2-af: cn10k-b: mcs: Mbox handlers to establish CA octeontx2-af: cn10k-b: mcs: Install TCAM bypass entry octeontx2-af: cnf10k-b: mcs: Add support for CNF10K MCS octeontx2-af: cn10k-b: mcs: Support to retrieve MCS stats octeontx2-af: cn10k-b: mcs: Support to reset MCS stats octeontx2-af: cn10k-b: mcs: Add debugfs support octeontx2-af: Fix pf bitmap for RVU VFs octeontx2-af: cnf10k-b: mcs: Add mbox to set port mode octeontx2-af: HW workaround for NPA buffer free octeontx2-af: mcs: Set mcs to bypass on error octeontx2-af: mcs: Add SA interrupt handling support irqchip/gicv3-its: Workaround for Marvell errata 35443 for 9xx octeontx2-af: mcs: Fix rvu mcs initialization octeontx-af: mcs: Fix mcs interrupt irq name octeontx2-pf: Recalculate UDP checksum for 1-step ptp packets octeontx2-pf: ptp: Skip checksum calculation for IEEE 802.3 packets octeontx2-af: mcs: Backport cosmetic changes octeontx2-af: mcs: Config parser to skip 8B header octeontx2-af: Dynamically allocate bpids for CPT and LBK octeontx2-af: Add mbox to alloc/free BPIDs octeontx2-pf: Don't allocate BPIDs to LBK interface George Cherian (1): genirq: Increase the number of interrupters German Gomez (1): perf arm-spe: Save context ID in record Gowthami Thiagarajan (3): firmware/psci: use common SMCCC_CONDUIT_* firmware: smccc: Drop
[linux-yocto] [yocto-kernel-cache][yocto-5.15][PATCH] bsp: aptiv-s32g: adjust kernel options for NXP SDK v5.15
From: Quanyang Wang Modify kernel options to adapt for NXP SDK v5.15 kernel. Signed-off-by: Quanyang Wang --- Hi Bruce, Would you please help merge this patch to the branch: yocto-5.15 Thanks, Quanyang --- bsp/aptiv-s32g/aptiv-cvc.cfg | 17 - 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/bsp/aptiv-s32g/aptiv-cvc.cfg b/bsp/aptiv-s32g/aptiv-cvc.cfg index 021e6c5c01..ed985b6dd9 100644 --- a/bsp/aptiv-s32g/aptiv-cvc.cfg +++ b/bsp/aptiv-s32g/aptiv-cvc.cfg @@ -14,12 +14,11 @@ CONFIG_ARM64=y CONFIG_ARCH_S32=y -CONFIG_SOC_S32GEN1=y +CONFIG_SOC_S32CC=y CONFIG_SCHED_MC=y CONFIG_ARM_SMMU=y CONFIG_PINCTRL_S32CC=y -CONFIG_PINCTRL_S32CC_CORE=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y @@ -38,7 +37,6 @@ CONFIG_CAN_FLEXCAN=m #Ethernet CONFIG_STMMAC_ETH=y -CONFIG_BCM89XXX_PHY=y #Serial CONFIG_SERIAL_AMBA_PL011=y @@ -63,7 +61,7 @@ CONFIG_PCIE_DW_PLAT_HOST=y CONFIG_PCI_ENDPOINT=y CONFIG_PCIE_DW_PLAT_EP=y CONFIG_PCIEAER=y -CONFIG_PCI_S32GEN1=y +CONFIG_PCI_S32CC=y #USB CONFIG_USB=y @@ -116,17 +114,17 @@ CONFIG_INPUT_UINPUT=y # Thermal CONFIG_THERMAL=y -CONFIG_S32GEN1_THERMAL=y +CONFIG_S32CC_THERMAL=y # ADC CONFIG_IIO=y -CONFIG_S32_ADC=m +CONFIG_S32CC_ADC=m # PWM CONFIG_PWM=y CONFIG_PWM_FSL_FTM=m -CONFIG_FCCU=y +CONFIG_S32CC_FCCU=y CONFIG_GPIOLIB=y CONFIG_OF_GPIO=y @@ -138,7 +136,7 @@ CONFIG_SPI_FSL_QUADSPI=y #RTC CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_S32GEN1=y +CONFIG_RTC_DRV_S32CC=y #I2C CONFIG_I2C=y @@ -147,11 +145,12 @@ CONFIG_I2C_IMX=m # Watchdog # We need keep this driver built-in since rmmod will trigger reboot -CONFIG_SAC58R_WDT=y +CONFIG_S32CC_WDT=y #NVME CONFIG_BLK_DEV_NVME=y CONFIG_NVME_TARGET=y +CONFIG_NVMEM_S32CC_SIUL2=y # Regulator configuration CONFIG_REGULATOR=y -- 2.36.1 -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#12312): https://lists.yoctoproject.org/g/linux-yocto/message/12312 Mute This Topic: https://lists.yoctoproject.org/mt/97818782/21656 Group Owner: linux-yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/linux-yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-