The nohash HTW_IBM (Hardware Table Walk) code is unused since support for A2 was removed in commit fb5a515704d7 ("powerpc: Remove platforms/ wsp and associated pieces") (2014).
The remaining supported CPUs use either no HTW (data_tlb_miss_bolted), or the e6500 HTW (data_tlb_miss_e6500). Signed-off-by: Michael Ellerman <m...@ellerman.id.au> --- arch/powerpc/include/asm/nohash/mmu-e500.h | 3 +- arch/powerpc/mm/nohash/tlb.c | 57 +----- arch/powerpc/mm/nohash/tlb_low_64e.S | 195 --------------------- 3 files changed, 2 insertions(+), 253 deletions(-) diff --git a/arch/powerpc/include/asm/nohash/mmu-e500.h b/arch/powerpc/include/asm/nohash/mmu-e500.h index 6ddced0415cb..7dc24b8632d7 100644 --- a/arch/powerpc/include/asm/nohash/mmu-e500.h +++ b/arch/powerpc/include/asm/nohash/mmu-e500.h @@ -303,8 +303,7 @@ extern unsigned long linear_map_top; extern int book3e_htw_mode; #define PPC_HTW_NONE 0 -#define PPC_HTW_IBM 1 -#define PPC_HTW_E6500 2 +#define PPC_HTW_E6500 1 /* * 64-bit booke platforms don't load the tlb in the tlb miss handler code. diff --git a/arch/powerpc/mm/nohash/tlb.c b/arch/powerpc/mm/nohash/tlb.c index 5ffa0af4328a..a5bb87ec8578 100644 --- a/arch/powerpc/mm/nohash/tlb.c +++ b/arch/powerpc/mm/nohash/tlb.c @@ -400,9 +400,8 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) static void __init setup_page_sizes(void) { unsigned int tlb0cfg; - unsigned int tlb0ps; unsigned int eptcfg; - int i, psize; + int psize; #ifdef CONFIG_PPC_E500 unsigned int mmucfg = mfspr(SPRN_MMUCFG); @@ -471,50 +470,6 @@ static void __init setup_page_sizes(void) goto out; } #endif - - tlb0cfg = mfspr(SPRN_TLB0CFG); - tlb0ps = mfspr(SPRN_TLB0PS); - eptcfg = mfspr(SPRN_EPTCFG); - - /* Look for supported direct sizes */ - for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { - struct mmu_psize_def *def = &mmu_psize_defs[psize]; - - if (tlb0ps & (1U << (def->shift - 10))) - def->flags |= MMU_PAGE_SIZE_DIRECT; - } - - /* Indirect page sizes supported ? */ - if ((tlb0cfg & TLBnCFG_IND) == 0 || - (tlb0cfg & TLBnCFG_PT) == 0) - goto out; - - book3e_htw_mode = PPC_HTW_IBM; - - /* Now, we only deal with one IND page size for each - * direct size. Hopefully all implementations today are - * unambiguous, but we might want to be careful in the - * future. - */ - for (i = 0; i < 3; i++) { - unsigned int ps, sps; - - sps = eptcfg & 0x1f; - eptcfg >>= 5; - ps = eptcfg & 0x1f; - eptcfg >>= 5; - if (!ps || !sps) - continue; - for (psize = 0; psize < MMU_PAGE_COUNT; psize++) { - struct mmu_psize_def *def = &mmu_psize_defs[psize]; - - if (ps == (def->shift - 10)) - def->flags |= MMU_PAGE_SIZE_INDIRECT; - if (sps == (def->shift - 10)) - def->ind = ps + 10; - } - } - out: /* Cleanup array and print summary */ pr_info("MMU: Supported page sizes\n"); @@ -543,10 +498,6 @@ static void __init setup_mmu_htw(void) */ switch (book3e_htw_mode) { - case PPC_HTW_IBM: - patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e); - patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e); - break; #ifdef CONFIG_PPC_E500 case PPC_HTW_E6500: extlb_level_exc = EX_TLB_SIZE; @@ -577,12 +528,6 @@ static void early_init_this_mmu(void) mmu_pte_psize = MMU_PAGE_2M; break; - case PPC_HTW_IBM: - mas4 |= MAS4_INDD; - mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT; - mmu_pte_psize = MMU_PAGE_1M; - break; - case PPC_HTW_NONE: mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT; mmu_pte_psize = mmu_virtual_psize; diff --git a/arch/powerpc/mm/nohash/tlb_low_64e.S b/arch/powerpc/mm/nohash/tlb_low_64e.S index 7e0b8fe1c279..b0eb3f7eaed1 100644 --- a/arch/powerpc/mm/nohash/tlb_low_64e.S +++ b/arch/powerpc/mm/nohash/tlb_low_64e.S @@ -893,201 +893,6 @@ virt_page_table_tlb_miss_whacko_fault: TLB_MISS_EPILOG_ERROR b exc_data_storage_book3e - -/************************************************************** - * * - * TLB miss handling for Book3E with hw page table support * - * * - **************************************************************/ - - -/* Data TLB miss */ - START_EXCEPTION(data_tlb_miss_htw) - TLB_MISS_PROLOG - - /* Now we handle the fault proper. We only save DEAR in normal - * fault case since that's the only interesting values here. - * We could probably also optimize by not saving SRR0/1 in the - * linear mapping case but I'll leave that for later - */ - mfspr r14,SPRN_ESR - mfspr r16,SPRN_DEAR /* get faulting address */ - srdi r11,r16,44 /* get region */ - xoris r11,r11,0xc - cmpldi cr0,r11,0 /* linear mapping ? */ - beq tlb_load_linear /* yes -> go to linear map load */ - cmpldi cr1,r11,1 /* vmalloc mapping ? */ - - /* We do the user/kernel test for the PID here along with the RW test - */ - srdi. r11,r16,60 /* Check for user region */ - ld r15,PACAPGD(r13) /* Load user pgdir */ - beq htw_tlb_miss - - /* XXX replace the RMW cycles with immediate loads + writes */ -1: mfspr r10,SPRN_MAS1 - rlwinm r10,r10,0,16,1 /* Clear TID */ - mtspr SPRN_MAS1,r10 - ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */ - beq+ cr1,htw_tlb_miss - - /* We got a crappy address, just fault with whatever DEAR and ESR - * are here - */ - TLB_MISS_EPILOG_ERROR - b exc_data_storage_book3e - -/* Instruction TLB miss */ - START_EXCEPTION(instruction_tlb_miss_htw) - TLB_MISS_PROLOG - - /* If we take a recursive fault, the second level handler may need - * to know whether we are handling a data or instruction fault in - * order to get to the right store fault handler. We provide that - * info by keeping a crazy value for ESR in r14 - */ - li r14,-1 /* store to exception frame is done later */ - - /* Now we handle the fault proper. We only save DEAR in the non - * linear mapping case since we know the linear mapping case will - * not re-enter. We could indeed optimize and also not save SRR0/1 - * in the linear mapping case but I'll leave that for later - * - * Faulting address is SRR0 which is already in r16 - */ - srdi r11,r16,44 /* get region */ - xoris r11,r11,0xc - cmpldi cr0,r11,0 /* linear mapping ? */ - beq tlb_load_linear /* yes -> go to linear map load */ - cmpldi cr1,r11,1 /* vmalloc mapping ? */ - - /* We do the user/kernel test for the PID here along with the RW test - */ - srdi. r11,r16,60 /* Check for user region */ - ld r15,PACAPGD(r13) /* Load user pgdir */ - beq htw_tlb_miss - - /* XXX replace the RMW cycles with immediate loads + writes */ -1: mfspr r10,SPRN_MAS1 - rlwinm r10,r10,0,16,1 /* Clear TID */ - mtspr SPRN_MAS1,r10 - ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */ - beq+ htw_tlb_miss - - /* We got a crappy address, just fault */ - TLB_MISS_EPILOG_ERROR - b exc_instruction_storage_book3e - - -/* - * This is the guts of the second-level TLB miss handler for direct - * misses. We are entered with: - * - * r16 = virtual page table faulting address - * r15 = PGD pointer - * r14 = ESR - * r13 = PACA - * r12 = TLB exception frame in PACA - * r11 = crap (free to use) - * r10 = crap (free to use) - * - * It can be re-entered by the linear mapping miss handler. However, to - * avoid too much complication, it will save/restore things for us - */ -htw_tlb_miss: -#ifdef CONFIG_PPC_KUAP - mfspr r10,SPRN_MAS1 - rlwinm. r10,r10,0,0x3fff0000 - beq- htw_tlb_miss_fault /* KUAP fault */ -#endif - /* Search if we already have a TLB entry for that virtual address, and - * if we do, bail out. - * - * MAS1:IND should be already set based on MAS4 - */ - PPC_TLBSRX_DOT(0,R16) - beq htw_tlb_miss_done - - /* Now, we need to walk the page tables. First check if we are in - * range. - */ - rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 - bne- htw_tlb_miss_fault - - /* Get the PGD pointer */ - cmpldi cr0,r15,0 - beq- htw_tlb_miss_fault - - /* Get to PGD entry */ - rldicl r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3 - clrrdi r10,r11,3 - ldx r15,r10,r15 - cmpdi cr0,r15,0 - bge htw_tlb_miss_fault - - /* Get to PUD entry */ - rldicl r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3 - clrrdi r10,r11,3 - ldx r15,r10,r15 - cmpdi cr0,r15,0 - bge htw_tlb_miss_fault - - /* Get to PMD entry */ - rldicl r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3 - clrrdi r10,r11,3 - ldx r15,r10,r15 - cmpdi cr0,r15,0 - bge htw_tlb_miss_fault - - /* Ok, we're all right, we can now create an indirect entry for - * a 1M or 256M page. - * - * The last trick is now that because we use "half" pages for - * the HTW (1M IND is 2K and 256M IND is 32K) we need to account - * for an added LSB bit to the RPN. For 64K pages, there is no - * problem as we already use 32K arrays (half PTE pages), but for - * 4K page we need to extract a bit from the virtual address and - * insert it into the "PA52" bit of the RPN. - */ - rlwimi r15,r16,32-9,20,20 - /* Now we build the MAS: - * - * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG - * MAS 1 : Almost fully setup - * - PID already updated by caller if necessary - * - TSIZE for now is base ind page size always - * MAS 2 : Use defaults - * MAS 3+7 : Needs to be done - */ - ori r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT) - - srdi r16,r10,32 - mtspr SPRN_MAS3,r10 - mtspr SPRN_MAS7,r16 - - tlbwe - -htw_tlb_miss_done: - /* We don't bother with restoring DEAR or ESR since we know we are - * level 0 and just going back to userland. They are only needed - * if you are going to take an access fault - */ - TLB_MISS_EPILOG_SUCCESS - rfi - -htw_tlb_miss_fault: - /* We need to check if it was an instruction miss. We know this - * though because r14 would contain -1 - */ - cmpdi cr0,r14,-1 - beq 1f - mtspr SPRN_DEAR,r16 - mtspr SPRN_ESR,r14 - TLB_MISS_EPILOG_ERROR - b exc_data_storage_book3e -1: TLB_MISS_EPILOG_ERROR - b exc_instruction_storage_book3e - /* * This is the guts of "any" level TLB miss handler for kernel linear * mapping misses. We are entered with: -- 2.45.1