add clock related specs to the MPC5125 "tower" board DTS
- add clock providers (crystal/oscillator, clock control module)
- add consumers (the CAN, SDHC, I2C, DIU, FEC, USB, PSC peripherals)
Signed-off-by: Gerhard Sittig <g...@denx.de>
---
arch/powerpc/boot/dts/mpc5125twr.dts | 53 +++++++++++++++++++++++++++++++++-
1 file changed, 52 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts
b/arch/powerpc/boot/dts/mpc5125twr.dts
index 0a0fe92216ae..806479ffc607 100644
--- a/arch/powerpc/boot/dts/mpc5125twr.dts
+++ b/arch/powerpc/boot/dts/mpc5125twr.dts
@@ -12,6 +12,8 @@
* option) any later version.
*/
+#include <dt-bindings/clock/mpc512x-clock.h>
+
/dts-v1/;
/ {
@@ -54,6 +56,17 @@
reg = <0x30000000 0x08000>; // 32K at 0x30000000
};
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+ };
+
soc@80000000 {
compatible = "fsl,mpc5121-immr";
#address-cells = <1>;
@@ -87,9 +100,12 @@
reg = <0xe00 0x100>;
};
- clock@f00 { // Clock control
+ clks: clock@f00 { // Clock control
compatible = "fsl,mpc5121-clock";
reg = <0xf00 0x100>;
+ #clock-cells = <1>;
+ clocks = <&osc>;
+ clock-names = "osc";
};
pmc@1000{ // Power Management Controller
@@ -114,18 +130,33 @@
compatible = "fsl,mpc5121-mscan";
interrupts = <12 0x8>;
reg = <0x1300 0x80>;
+ clocks = <&clks MPC512x_CLK_BDLC>,
+ <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SYS>,
+ <&clks MPC512x_CLK_REF>,
+ <&clks MPC512x_CLK_MSCAN0_MCLK>;
+ clock-names = "ipg", "ips", "sys", "ref", "mclk";
};
can@1380 {
compatible = "fsl,mpc5121-mscan";
interrupts = <13 0x8>;
reg = <0x1380 0x80>;
+ clocks = <&clks MPC512x_CLK_BDLC>,
+ <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SYS>,
+ <&clks MPC512x_CLK_REF>,
+ <&clks MPC512x_CLK_MSCAN1_MCLK>;
+ clock-names = "ipg", "ips", "sys", "ref", "mclk";
};
sdhc@1500 {
compatible = "fsl,mpc5121-sdhc";
interrupts = <8 0x8>;
reg = <0x1500 0x100>;
+ clocks = <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SDHC>;
+ clock-names = "ipg", "per";
};
i2c@1700 {
@@ -134,6 +165,8 @@
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
reg = <0x1700 0x20>;
interrupts = <0x9 0x8>;
+ clocks = <&clks MPC512x_CLK_I2C>;
+ clock-names = "ipg";
};
i2c@1720 {
@@ -142,6 +175,8 @@
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
reg = <0x1720 0x20>;
interrupts = <0xa 0x8>;
+ clocks = <&clks MPC512x_CLK_I2C>;
+ clock-names = "ipg";
};
i2c@1740 {
@@ -150,6 +185,8 @@
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
reg = <0x1740 0x20>;
interrupts = <0xb 0x8>;
+ clocks = <&clks MPC512x_CLK_I2C>;
+ clock-names = "ipg";
};
i2ccontrol@1760 {
@@ -161,6 +198,8 @@
compatible = "fsl,mpc5121-diu";
reg = <0x2100 0x100>;
interrupts = <64 0x8>;
+ clocks = <&clks MPC512x_CLK_DIU>;
+ clock-names = "ipg";
};
mdio@2800 {
@@ -180,6 +219,8 @@
interrupts = <4 0x8>;
phy-handle = < &phy0 >;
phy-connection-type = "rmii";
+ clocks = <&clks MPC512x_CLK_FEC>;
+ clock-names = "per";
};
// IO control
@@ -196,6 +237,8 @@
interrupts = <43 0x8>;
dr_mode = "host";
phy_type = "ulpi";
+ clocks = <&clks MPC512x_CLK_USB1>;
+ clock-names = "ipg";
};
// 5125 PSCs are not 52xx or 5121 PSC compatible
@@ -206,6 +249,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC1>,
+ <&clks MPC512x_CLK_PSC1_MCLK>;
+ clock-names = "ipg", "mclk";
};
// PSC9 uart1 aka ttyPSC1
@@ -215,12 +261,17 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC9>,
+ <&clks MPC512x_CLK_PSC9_MCLK>;
+ clock-names = "ipg", "mclk";
};
pscfifo@11f00 {
compatible = "fsl,mpc5121-psc-fifo";
reg = <0x11f00 0x100>;
interrupts = <40 0x8>;
+ clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+ clock-names = "ipg";
};
dma@14000 {
--
1.7.10.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
