Re: [V2] cpuidle/powernv: Read target_residency value of idle states from DT if available
On Wed, 2015-28-01 at 02:13:06 UTC, Preeti U Murthy wrote: > The device tree now exposes the residency values for different idle states. > Read > these values instead of calculating residency from the latency values. The > values > exposed in the DT are validated for optimal power efficiency. However to > maintain > compatibility with the older firmware code which does not expose residency > values, use default values as a fallback mechanism. While at it, handle some > cleanups. > > Signed-off-by: Preeti U Murthy > Acked-by: Stewart Smith This looks good to me. Acked-by: Michael Ellerman I'm assuming Rafael will take it. cheers ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH V2] cpuidle/powernv: Read target_residency value of idle states from DT if available
Preeti U Murthy writes: > On 01/28/2015 02:45 PM, Stewart Smith wrote: >> Preeti U Murthy writes: >>> The device tree now exposes the residency values for different idle states. >>> Read >>> these values instead of calculating residency from the latency values. The >>> values >>> exposed in the DT are validated for optimal power efficiency. However to >>> maintain >>> compatibility with the older firmware code which does not expose residency >>> values, use default values as a fallback mechanism. While at it, handle some >>> cleanups. >> >> From a "I just merged the patch that exports these values from firmware" >> point of view, using them and falling back looks good. >> >> (I find the hardcoding of snooze in the driver a bit odd, as is the > > Snooze is the only software defined idle state, the rest are platform > specific. The first idle state is usually associated with some sort of a > polling operation and each architecture has a variant to this. This is > why we end up hard-coding this idle state in the driver as far as my > understanding goes. At least in the PowerISA 2.07 I could only see that lowering priority would give priority to other threads in the core, I couldn't find anything saying that or 31,31,31 would end up saving any power... but I could be looking in the wrong place too. Basically, I was wanting to check that it's actually written down and architected somewhere that this is the case and it isn't something too P7/P8 specific. ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH V2] cpuidle/powernv: Read target_residency value of idle states from DT if available
On 01/28/2015 02:45 PM, Stewart Smith wrote: > Preeti U Murthy writes: >> The device tree now exposes the residency values for different idle states. >> Read >> these values instead of calculating residency from the latency values. The >> values >> exposed in the DT are validated for optimal power efficiency. However to >> maintain >> compatibility with the older firmware code which does not expose residency >> values, use default values as a fallback mechanism. While at it, handle some >> cleanups. > > From a "I just merged the patch that exports these values from firmware" > point of view, using them and falling back looks good. > > (I find the hardcoding of snooze in the driver a bit odd, as is the Snooze is the only software defined idle state, the rest are platform specific. The first idle state is usually associated with some sort of a polling operation and each architecture has a variant to this. This is why we end up hard-coding this idle state in the driver as far as my understanding goes. > hardcoding of max power states to 8 - which could bite us in the future Hmm.. not sure about this. Need to check. > if a future processor has more states... but these aren't problems with > this patch) > > Acked-by: Stewart Smith Thanks! Regards Preeti U Murthy > ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH V2] cpuidle/powernv: Read target_residency value of idle states from DT if available
Preeti U Murthy writes: > The device tree now exposes the residency values for different idle states. > Read > these values instead of calculating residency from the latency values. The > values > exposed in the DT are validated for optimal power efficiency. However to > maintain > compatibility with the older firmware code which does not expose residency > values, use default values as a fallback mechanism. While at it, handle some > cleanups. From a "I just merged the patch that exports these values from firmware" point of view, using them and falling back looks good. (I find the hardcoding of snooze in the driver a bit odd, as is the hardcoding of max power states to 8 - which could bite us in the future if a future processor has more states... but these aren't problems with this patch) Acked-by: Stewart Smith ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
[PATCH V2] cpuidle/powernv: Read target_residency value of idle states from DT if available
The device tree now exposes the residency values for different idle states. Read
these values instead of calculating residency from the latency values. The
values
exposed in the DT are validated for optimal power efficiency. However to
maintain
compatibility with the older firmware code which does not expose residency
values, use default values as a fallback mechanism. While at it, handle some
cleanups.
Signed-off-by: Preeti U Murthy
---
Changes from V1: https://lkml.org/lkml/2015/1/19/221
1. Used a better API for reading the DT property values.
2. Code cleanups
drivers/cpuidle/cpuidle-powernv.c | 57 -
1 file changed, 31 insertions(+), 26 deletions(-)
diff --git a/drivers/cpuidle/cpuidle-powernv.c
b/drivers/cpuidle/cpuidle-powernv.c
index 223d505..29fdbe7 100644
--- a/drivers/cpuidle/cpuidle-powernv.c
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -13,6 +13,7 @@
#include
#include
#include
+#include
#include
#include
@@ -161,9 +162,9 @@ static int powernv_add_idle_states(void)
int nr_idle_states = 1; /* Snooze */
int dt_idle_states;
const __be32 *idle_state_flags;
-const __be32 *idle_state_latency;
-u32 len_flags, flags, latency_ns;
- int i;
+ u32 len_flags, flags;
+ u32 *latency_ns, *residency_ns;
+ int i, rc;
/* Currently we have snooze statically defined */
@@ -175,53 +176,57 @@ static int powernv_add_idle_states(void)
idle_state_flags = of_get_property(power_mgt,
"ibm,cpu-idle-state-flags", &len_flags);
if (!idle_state_flags) {
- pr_warn("DT-PowerMgmt: missing ibm,cpu-idle-state-flags\n");
+ pr_warn("cpuidle-powernv : missing ibm,cpu-idle-state-flags in
DT\n");
return nr_idle_states;
}
- idle_state_latency = of_get_property(power_mgt,
- "ibm,cpu-idle-state-latencies-ns", NULL);
- if (!idle_state_latency) {
- pr_warn("DT-PowerMgmt: missing
ibm,cpu-idle-state-latencies-ns\n");
+ dt_idle_states = len_flags / sizeof(u32);
+
+ latency_ns = kzalloc(sizeof(*latency_ns) * dt_idle_states, GFP_KERNEL);
+ rc = of_property_read_u32_array(power_mgt,
+ "ibm,cpu-idle-state-latencies-ns", latency_ns,
dt_idle_states);
+ if (rc) {
+ pr_warn("cpuidle-powernv: missing
ibm,cpu-idle-state-latencies-ns in DT\n");
return nr_idle_states;
}
- dt_idle_states = len_flags / sizeof(u32);
+ residency_ns = kzalloc(sizeof(*residency_ns) * dt_idle_states,
GFP_KERNEL);
+ rc = of_property_read_u32_array(power_mgt,
+ "ibm,cpu-idle-state-residency-ns", residency_ns,
dt_idle_states);
for (i = 0; i < dt_idle_states; i++) {
flags = be32_to_cpu(idle_state_flags[i]);
-
- /* Cpuidle accepts exit_latency in us and we estimate
-* target residency to be 10x exit_latency
+ /*
+* Cpuidle accepts exit_latency and target_residency in us.
+* Use default target_residency values if f/w does not expose
it.
*/
- latency_ns = be32_to_cpu(idle_state_latency[i]);
if (flags & OPAL_PM_NAP_ENABLED) {
/* Add NAP state */
strcpy(powernv_states[nr_idle_states].name, "Nap");
strcpy(powernv_states[nr_idle_states].desc, "Nap");
powernv_states[nr_idle_states].flags = 0;
- powernv_states[nr_idle_states].exit_latency =
- ((unsigned int)latency_ns) / 1000;
- powernv_states[nr_idle_states].target_residency =
- ((unsigned int)latency_ns / 100);
+ powernv_states[nr_idle_states].target_residency = 100;
powernv_states[nr_idle_states].enter = &nap_loop;
- nr_idle_states++;
- }
-
- if (flags & OPAL_PM_SLEEP_ENABLED ||
+ } else if (flags & OPAL_PM_SLEEP_ENABLED ||
flags & OPAL_PM_SLEEP_ENABLED_ER1) {
/* Add FASTSLEEP state */
strcpy(powernv_states[nr_idle_states].name,
"FastSleep");
strcpy(powernv_states[nr_idle_states].desc,
"FastSleep");
powernv_states[nr_idle_states].flags =
CPUIDLE_FLAG_TIMER_STOP;
- powernv_states[nr_idle_states].exit_latency =
- ((unsigned int)latency_ns) / 1000;
- powernv_states[nr_idle_states].target_residency =
- ((unsigned int)latency_ns / 100);
+ powernv_states[nr_idle_states].target_residency =
30;
powernv_states[nr_i
