Re: [alsa-devel] [RFC][PATCH v1] ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series

2014-06-13 Thread Nicolin Chen
On Fri, Jun 13, 2014 at 11:00:01AM +0200, Takashi Iwai wrote:
> At Thu, 12 Jun 2014 22:24:55 -0500,
> Timur Tabi wrote:
> > 
> > On Thu, Dec 12, 2013 at 4:44 AM, Nicolin Chen
> >  wrote:
> > >
> > > +static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
> > > + int clk_id, unsigned int freq, int dir)
> > > +{
> > > +   struct fsl_ssi_private *ssi_private = 
> > > snd_soc_dai_get_drvdata(cpu_dai);
> > > +   struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
> > > +   int synchronous = ssi_private->cpu_dai_drv.symmetric_rates, ret;
> > > +   u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
> > > +   unsigned long flags, clkrate, baudrate, tmprate;
> > > +   u64 sub, savesub = 10;
> > > +
> > > +   /* Don't apply it to any non-baudclk circumstance */
> > > +   if (IS_ERR(ssi_private->baudclk))
> > > +   return -EINVAL;
> > > +
> > > +   /* It should be already enough to divide clock by setting pm 
> > > alone */
> > > +   psr = 0;
> > > +   div2 = 0;
> > > +
> > > +   factor = (div2 + 1) * (7 * psr + 1) * 2;
> > > +
> > > +   for (i = 0; i < 255; i++) {
> > > +   /* The bclk rate must be smaller than 1/5 sysclk rate */
> > > +   if (factor * (i + 1) < 5)
> > > +   continue;
> > > +
> > > +   tmprate = freq * factor * (i + 2);
> > > +   clkrate = clk_round_rate(ssi_private->baudclk, tmprate);
> > > +
> > > +   do_div(clkrate, factor);
> > 
> > This do_div() call causes this warning on PowerPC:
> > 
> >   CC  sound/soc/fsl/fsl_ssi.o
> > sound/soc/fsl/fsl_ssi.c: In function 'fsl_ssi_set_bclk':
> > sound/soc/fsl/fsl_ssi.c:593:3: warning: comparison of distinct pointer
> > types lacks a cast
> > sound/soc/fsl/fsl_ssi.c:593:3: warning: right shift count >= width of type
> > sound/soc/fsl/fsl_ssi.c:593:3: warning: passing argument 1 of
> > '__div64_32' from incompatible pointer type
> > include/asm-generic/div64.h:35:17: note: expected 'uint64_t *' but
> > argument is of type 'long unsigned int *'
> > 
> > The comments in do_div() say that clkrate should be 64-bits.  Changing
> > clkrate to a u64 does fix this problem, but I'm wondering if anyone
> > else has seen this.  This code has been around for months.
> 
> Using do_div() for unsigned long makes no sense.
> And, you *must* pass uint64_t there as an argument, since it's no
> inline function and there is no implicit conversion in the generic
> code.
> 
> In short, use the normal division operator instead:
>   clkrate /= factor;

Yes. I forgot why I used do_div() for clkrate at the first place
but it's definitely a mistake here.

Sorry,
Nicolin

> 
> 
> Takashi
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Re: [alsa-devel] [RFC][PATCH v1] ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series

2014-06-13 Thread Takashi Iwai
At Thu, 12 Jun 2014 22:24:55 -0500,
Timur Tabi wrote:
> 
> On Thu, Dec 12, 2013 at 4:44 AM, Nicolin Chen
>  wrote:
> >
> > +static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
> > + int clk_id, unsigned int freq, int dir)
> > +{
> > +   struct fsl_ssi_private *ssi_private = 
> > snd_soc_dai_get_drvdata(cpu_dai);
> > +   struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
> > +   int synchronous = ssi_private->cpu_dai_drv.symmetric_rates, ret;
> > +   u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
> > +   unsigned long flags, clkrate, baudrate, tmprate;
> > +   u64 sub, savesub = 10;
> > +
> > +   /* Don't apply it to any non-baudclk circumstance */
> > +   if (IS_ERR(ssi_private->baudclk))
> > +   return -EINVAL;
> > +
> > +   /* It should be already enough to divide clock by setting pm alone 
> > */
> > +   psr = 0;
> > +   div2 = 0;
> > +
> > +   factor = (div2 + 1) * (7 * psr + 1) * 2;
> > +
> > +   for (i = 0; i < 255; i++) {
> > +   /* The bclk rate must be smaller than 1/5 sysclk rate */
> > +   if (factor * (i + 1) < 5)
> > +   continue;
> > +
> > +   tmprate = freq * factor * (i + 2);
> > +   clkrate = clk_round_rate(ssi_private->baudclk, tmprate);
> > +
> > +   do_div(clkrate, factor);
> 
> This do_div() call causes this warning on PowerPC:
> 
>   CC  sound/soc/fsl/fsl_ssi.o
> sound/soc/fsl/fsl_ssi.c: In function 'fsl_ssi_set_bclk':
> sound/soc/fsl/fsl_ssi.c:593:3: warning: comparison of distinct pointer
> types lacks a cast
> sound/soc/fsl/fsl_ssi.c:593:3: warning: right shift count >= width of type
> sound/soc/fsl/fsl_ssi.c:593:3: warning: passing argument 1 of
> '__div64_32' from incompatible pointer type
> include/asm-generic/div64.h:35:17: note: expected 'uint64_t *' but
> argument is of type 'long unsigned int *'
> 
> The comments in do_div() say that clkrate should be 64-bits.  Changing
> clkrate to a u64 does fix this problem, but I'm wondering if anyone
> else has seen this.  This code has been around for months.

Using do_div() for unsigned long makes no sense.
And, you *must* pass uint64_t there as an argument, since it's no
inline function and there is no implicit conversion in the generic
code.

In short, use the normal division operator instead:
clkrate /= factor;


Takashi
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Re: [alsa-devel] [RFC][PATCH v1] ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series

2014-06-12 Thread Nicolin Chen
On Thu, Jun 12, 2014 at 10:44:48PM -0500, Timur Tabi wrote:
> On Thu, Jun 12, 2014 at 10:21 PM, Nicolin Chen
>  wrote:
> 
> > It compiles well with my ARM cross compiler. I guess it might be related
> > to the compiler's version? But we should fix it anyway. Would you mind if
> > I submit a patch? Or you do it directly?
> 
> I just submitted a patch, but I can't test the code since I don't have
> any boards that configure the SSI into master mode, so this function
> is never called.

I just tested it with i.MX platform. It still works.

Thank you,
Nicolin
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Re: [alsa-devel] [RFC][PATCH v1] ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series

2014-06-12 Thread Timur Tabi
On Thu, Jun 12, 2014 at 10:21 PM, Nicolin Chen
 wrote:

> It compiles well with my ARM cross compiler. I guess it might be related
> to the compiler's version? But we should fix it anyway. Would you mind if
> I submit a patch? Or you do it directly?

I just submitted a patch, but I can't test the code since I don't have
any boards that configure the SSI into master mode, so this function
is never called.
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Re: [alsa-devel] [RFC][PATCH v1] ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series

2014-06-12 Thread Nicolin Chen
Sir,

On Thu, Jun 12, 2014 at 10:24:55PM -0500, Timur Tabi wrote:
> On Thu, Dec 12, 2013 at 4:44 AM, Nicolin Chen
>  wrote:
> >
> > +static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
> > + int clk_id, unsigned int freq, int dir)
> > +{
> > +   struct fsl_ssi_private *ssi_private = 
> > snd_soc_dai_get_drvdata(cpu_dai);
> > +   struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
> > +   int synchronous = ssi_private->cpu_dai_drv.symmetric_rates, ret;
> > +   u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
> > +   unsigned long flags, clkrate, baudrate, tmprate;
> > +   u64 sub, savesub = 10;
> > +
> > +   /* Don't apply it to any non-baudclk circumstance */
> > +   if (IS_ERR(ssi_private->baudclk))
> > +   return -EINVAL;
> > +
> > +   /* It should be already enough to divide clock by setting pm alone 
> > */
> > +   psr = 0;
> > +   div2 = 0;
> > +
> > +   factor = (div2 + 1) * (7 * psr + 1) * 2;
> > +
> > +   for (i = 0; i < 255; i++) {
> > +   /* The bclk rate must be smaller than 1/5 sysclk rate */
> > +   if (factor * (i + 1) < 5)
> > +   continue;
> > +
> > +   tmprate = freq * factor * (i + 2);
> > +   clkrate = clk_round_rate(ssi_private->baudclk, tmprate);
> > +
> > +   do_div(clkrate, factor);
> 
> This do_div() call causes this warning on PowerPC:
> 
>   CC  sound/soc/fsl/fsl_ssi.o
> sound/soc/fsl/fsl_ssi.c: In function 'fsl_ssi_set_bclk':
> sound/soc/fsl/fsl_ssi.c:593:3: warning: comparison of distinct pointer
> types lacks a cast
> sound/soc/fsl/fsl_ssi.c:593:3: warning: right shift count >= width of type
> sound/soc/fsl/fsl_ssi.c:593:3: warning: passing argument 1 of
> '__div64_32' from incompatible pointer type
> include/asm-generic/div64.h:35:17: note: expected 'uint64_t *' but
> argument is of type 'long unsigned int *'
> 
> The comments in do_div() say that clkrate should be 64-bits.  Changing
> clkrate to a u64 does fix this problem, but I'm wondering if anyone
> else has seen this.  This code has been around for months.

It compiles well with my ARM cross compiler. I guess it might be related
to the compiler's version? But we should fix it anyway. Would you mind if
I submit a patch? Or you do it directly?

Thank you,
Nicolin
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Re: [alsa-devel] [RFC][PATCH v1] ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series

2014-06-12 Thread Timur Tabi
On Thu, Dec 12, 2013 at 4:44 AM, Nicolin Chen
 wrote:
>
> +static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
> + int clk_id, unsigned int freq, int dir)
> +{
> +   struct fsl_ssi_private *ssi_private = 
> snd_soc_dai_get_drvdata(cpu_dai);
> +   struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
> +   int synchronous = ssi_private->cpu_dai_drv.symmetric_rates, ret;
> +   u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
> +   unsigned long flags, clkrate, baudrate, tmprate;
> +   u64 sub, savesub = 10;
> +
> +   /* Don't apply it to any non-baudclk circumstance */
> +   if (IS_ERR(ssi_private->baudclk))
> +   return -EINVAL;
> +
> +   /* It should be already enough to divide clock by setting pm alone */
> +   psr = 0;
> +   div2 = 0;
> +
> +   factor = (div2 + 1) * (7 * psr + 1) * 2;
> +
> +   for (i = 0; i < 255; i++) {
> +   /* The bclk rate must be smaller than 1/5 sysclk rate */
> +   if (factor * (i + 1) < 5)
> +   continue;
> +
> +   tmprate = freq * factor * (i + 2);
> +   clkrate = clk_round_rate(ssi_private->baudclk, tmprate);
> +
> +   do_div(clkrate, factor);

This do_div() call causes this warning on PowerPC:

  CC  sound/soc/fsl/fsl_ssi.o
sound/soc/fsl/fsl_ssi.c: In function 'fsl_ssi_set_bclk':
sound/soc/fsl/fsl_ssi.c:593:3: warning: comparison of distinct pointer
types lacks a cast
sound/soc/fsl/fsl_ssi.c:593:3: warning: right shift count >= width of type
sound/soc/fsl/fsl_ssi.c:593:3: warning: passing argument 1 of
'__div64_32' from incompatible pointer type
include/asm-generic/div64.h:35:17: note: expected 'uint64_t *' but
argument is of type 'long unsigned int *'

The comments in do_div() say that clkrate should be 64-bits.  Changing
clkrate to a u64 does fix this problem, but I'm wondering if anyone
else has seen this.  This code has been around for months.
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev