> memcpy_toio() works fine, the data is written correctly. After
> DMA, the correct data appears at offsets 0xC, 0x1C, 0x2C, etc.
> of the destination buffer. I have 12 bytes of junk, 4 bytes of
> correct data, then again 12 bytes of junk and so on.
Does your Avalon MM slave decode the 4 byte enables?
The slave always sees 2 Avalon MM writes, one of which
will have no byte enables asserted.
(Actually it is a 64bit Avalon transfer - and a bus width adapter
gets inserted for you.)
Internal M9K memory blocks get this right...
David
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
