Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On Sun, Dec 20, 2015 at 6:33 PM, Maciej S. Szmigiero wrote: > There is no guarantee that on fsl_ssi module load > SSI registers will have their power-on-reset values. > > In fact, if the driver is reloaded the values in > registers will be whatever they were set to previously. > > This fixes hard lockup on fsl_ssi module reload, > at least in AC'97 mode. > > Fixes: 05cf237972fe ("ASoC: fsl_ssi: Add driver suspend and resume to support > MEGA Fast") > > Signed-off-by: Maciej S. Szmigiero Reviewed-by: Fabio Estevam ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Maciej S. Szmigiero wrote: There is no guarantee that on fsl_ssi module load SSI registers will have their power-on-reset values. In fact, if the driver is reloaded the values in registers will be whatever they were set to previously. This fixes hard lockup on fsl_ssi module reload, at least in AC'97 mode. Fixes: 05cf237972fe ("ASoC: fsl_ssi: Add driver suspend and resume to support MEGA Fast") Signed-off-by: Maciej S. Szmigiero Acked-by: Timur Tabi I'm surprised that we're actually encouraging drivers to contain hard-coded register values. ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Hi Maciej, On Sun, Dec 20, 2015 at 6:33 PM, Maciej S. Szmigiero wrote: > There is no guarantee that on fsl_ssi module load > SSI registers will have their power-on-reset values. > > In fact, if the driver is reloaded the values in > registers will be whatever they were set to previously. > > This fixes hard lockup on fsl_ssi module reload, > at least in AC'97 mode. > > Fixes: 05cf237972fe ("ASoC: fsl_ssi: Add driver suspend and resume to support > MEGA Fast") > > Signed-off-by: Maciej S. Szmigiero This patch causes the following issue in linux-next: [2.526984] [ cut here ] [2.531632] WARNING: CPU: 1 PID: 1 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0xf4/0x124() [2.540771] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) [2.546175] Modules linked in: [2.549447] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc8-next-20160111 #204 [2.557021] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [2.563553] Backtrace: [2.566040] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [2.573615] r6:0ac3 r5: r4: r3: [2.579362] [] (show_stack) from [] (dump_stack+0x88/0xa4) [2.586607] [] (dump_stack) from [] (warn_slowpath_common+0x80/0xbc) [2.594702] r5:c0071ed0 r4:ef055b90 [2.598326] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x38/0x40) [2.607028] r8:0004 r7:0004 r6:024080c0 r5:024080c0 r4:6093 [2.613829] [] (warn_slowpath_fmt) from [] (lockdep_trace_alloc+0xf4/0x124) [2.622532] r3:c09a1634 r2:c099dc0c [2.626161] [] (lockdep_trace_alloc) from [] (kmem_cache_alloc+0x30/0x174) [2.634778] r4:ef001f00 r3:c0b02a88 [2.638407] [] (kmem_cache_alloc) from [] (regcache_rbtree_write+0x150/0x724) [2.647283] r10: r9:0010 r8:0004 r7:0004 r6:002c r5: [2.655203] r4: [2.657767] [] (regcache_rbtree_write) from [] (regcache_write+0x5c/0x64) [2.666295] r10:ef0f1c80 r9:ef0f6500 r8:0001 r7:ef055cbc r6:0010 r5: [2.674215] r4:eeaaf000 [2.676778] [] (regcache_write) from [] (_regmap_read+0xa8/0xc0) [2.684526] r6: [2.685780] mmc2: new DDR MMC card at address 0001 [2.686495] mmcblk1: mmc2:0001 SEM08G 7.40 GiB [2.686792] mmcblk1boot0: mmc2:0001 SEM08G partition 1 2.00 MiB [2.687092] mmcblk1boot1: mmc2:0001 SEM08G partition 2 2.00 MiB [2.687388] mmcblk1rpmb: mmc2:0001 SEM08G partition 3 128 KiB [2.713792] r5:0010 r4:eeaaf000 r3: [2.718660] [] (_regmap_read) from [] (regmap_read+0x44/0x64) [2.726147] r7:1000 r6:ef055cbc r5:0010 r4:eeaaf000 [2.731890] [] (regmap_read) from [] (_fsl_ssi_set_dai_fmt+0xa4/0x440) [2.740159] r6:1001 r5:eeaaf000 r4:eeaaee10 r3:01400454 [2.745897] [] (_fsl_ssi_set_dai_fmt) from [] (fsl_ssi_set_dai_fmt+0x1c/0x20) [2.754773] r10:ef0f1c80 r8:ef118800 r7:1001 r6: r5:0001 r4:ef0f1700 [2.762706] [] (fsl_ssi_set_dai_fmt) from [] (snd_soc_runtime_set_dai_fmt+0x104/0x154) [2.772375] [] (snd_soc_runtime_set_dai_fmt) from [] (snd_soc_register_card+0xc14/0xdd0) [2.782206] r10:eeaa889c r9:0002 r8:eeaa8810 r7:ef118800 r6:0001 r5: [2.790126] r4:ef0f1c80 r3: [2.793750] [] (snd_soc_register_card) from [] (devm_snd_soc_register_card+0x38/0x78) [2.803321] r10:ef20b420 r9: r8:eeaa8810 r7:ef1cf410 r6:eeaa889c r5:ef0f6490 [2.811240] r4:eeaa889c [2.813806] [] (devm_snd_soc_register_card) from [] (imx_wm8962_probe+0x2fc/0x3a0) [2.823116] r7:ef1cf410 r6:eeaa889c r5:c085ad98 r4:ef1cf400 [2.828858] [] (imx_wm8962_probe) from [] (platform_drv_probe+0x58/0xb4) [2.837300] r10: r9:00de r8:c0b645f4 r7:c0b645f4 r6:fdfb r5:ef1cf410 [2.845220] r4:fffe [2.847788] [] (platform_drv_probe) from [] (driver_probe_device+0x1f8/0x2b4) [2.856665] r7: r6:c1379780 r5:c1379778 r4:ef1cf410 [2.862405] [] (driver_probe_device) from [] (__driver_attach+0x9c/0xa0) [2.870846] r10: r8:c0ad7b30 r7: r6:ef1cf444 r5:c0b645f4 r4:ef1cf410 [2.878776] [] (__driver_attach) from [] (bus_for_each_dev+0x5c/0x90) [2.886956] r6:c03d27b8 r5:c0b645f4 r4: r3:ef1b695c [2.892695] [] (bus_for_each_dev) from [] (driver_attach+0x20/0x28) [2.900703] r6:c0b2f9f0 r5:ef0f1400 r4:c0b645f4 [2.905383] [] (driver_attach) from [] (bus_add_driver+0xec/0x1fc) [2.913313] [] (bus_add_driver) from [] (driver_register+0x80/0xfc) [2.921320] r7:c0ae684c r6:ef0f63c0 r5:c0b06188 r4:c0b645f4 [2.927059] [] (driver_register) from [] (__platform_driver_register+0x38/0x4c) [2.936109] r5:c0b06188 r4:c0b06188 [2.939733] [] (__platform_driver_register) from [] (imx_wm8962_driver_init+0x18/0x20) [2.949398] [] (imx_wm8962_driver_init) from [] (do_one_initcall+0x88/0x1e4) [2.958200] [] (do_one_initcall) from [] (kernel_init_freeable+0x11c/0x1f0) [2.966902]
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On Mon, Jan 11, 2016 at 10:04 AM, Fabio Estevam wrote: > This patch causes the following issue in linux-next: > > [2.526984] [ cut here ] > [2.531632] WARNING: CPU: 1 PID: 1 at kernel/locking/lockdep.c:2755 > lockdep_trace_alloc+0xf4/0x124() > [2.540771] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) > [2.546175] Modules linked in: > [2.549447] CPU: 1 PID: 1 Comm: swapper/0 Not tainted > 4.4.0-rc8-next-20160111 #204 > [2.557021] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) > [2.563553] Backtrace: > [2.566040] [] (dump_backtrace) from [] > (show_stack+0x18/0x1c) > [2.573615] r6:0ac3 r5: r4: r3: > [2.579362] [] (show_stack) from [] > (dump_stack+0x88/0xa4) > [2.586607] [] (dump_stack) from [] > (warn_slowpath_common+0x80/0xbc) > [2.594702] r5:c0071ed0 r4:ef055b90 > [2.598326] [] (warn_slowpath_common) from [] > (warn_slowpath_fmt+0x38/0x40) > [2.607028] r8:0004 r7:0004 r6:024080c0 r5:024080c0 r4:6093 > [2.613829] [] (warn_slowpath_fmt) from [] > (lockdep_trace_alloc+0xf4/0x124) > [2.622532] r3:c09a1634 r2:c099dc0c > [2.626161] [] (lockdep_trace_alloc) from [] > (kmem_cache_alloc+0x30/0x174) > [2.634778] r4:ef001f00 r3:c0b02a88 > [2.638407] [] (kmem_cache_alloc) from [] > (regcache_rbtree_write+0x150/0x724) > [2.647283] r10: r9:0010 r8:0004 r7:0004 > r6:002c r5: > [2.655203] r4: > [2.657767] [] (regcache_rbtree_write) from [] > (regcache_write+0x5c/0x64) This fixes the warning: --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -180,7 +180,6 @@ static const struct regmap_config fsl_ssi_regconfig = { .volatile_reg = fsl_ssi_volatile_reg, .precious_reg = fsl_ssi_precious_reg, .writeable_reg = fsl_ssi_writeable_reg, - .cache_type = REGCACHE_RBTREE, }; Is this the correct fix? ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Hi Fabio, Thanks for testing. On 11.01.2016 13:10, Fabio Estevam wrote: > On Mon, Jan 11, 2016 at 10:04 AM, Fabio Estevam wrote: > >> This patch causes the following issue in linux-next: >> >> [2.526984] [ cut here ] >> [2.531632] WARNING: CPU: 1 PID: 1 at kernel/locking/lockdep.c:2755 >> lockdep_trace_alloc+0xf4/0x124() >> [2.540771] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) >> [2.546175] Modules linked in: >> [2.549447] CPU: 1 PID: 1 Comm: swapper/0 Not tainted >> 4.4.0-rc8-next-20160111 #204 >> [2.557021] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) >> [2.563553] Backtrace: >> [2.566040] [] (dump_backtrace) from [] >> (show_stack+0x18/0x1c) >> [2.573615] r6:0ac3 r5: r4: r3: >> [2.579362] [] (show_stack) from [] >> (dump_stack+0x88/0xa4) >> [2.586607] [] (dump_stack) from [] >> (warn_slowpath_common+0x80/0xbc) >> [2.594702] r5:c0071ed0 r4:ef055b90 >> [2.598326] [] (warn_slowpath_common) from [] >> (warn_slowpath_fmt+0x38/0x40) >> [2.607028] r8:0004 r7:0004 r6:024080c0 r5:024080c0 r4:6093 >> [2.613829] [] (warn_slowpath_fmt) from [] >> (lockdep_trace_alloc+0xf4/0x124) >> [2.622532] r3:c09a1634 r2:c099dc0c >> [2.626161] [] (lockdep_trace_alloc) from [] >> (kmem_cache_alloc+0x30/0x174) >> [2.634778] r4:ef001f00 r3:c0b02a88 >> [2.638407] [] (kmem_cache_alloc) from [] >> (regcache_rbtree_write+0x150/0x724) >> [2.647283] r10: r9:0010 r8:0004 r7:0004 >> r6:002c r5: >> [2.655203] r4: >> [2.657767] [] (regcache_rbtree_write) from [] >> (regcache_write+0x5c/0x64) > > This fixes the warning: > > --- a/sound/soc/fsl/fsl_ssi.c > +++ b/sound/soc/fsl/fsl_ssi.c > @@ -180,7 +180,6 @@ static const struct regmap_config fsl_ssi_regconfig = { > .volatile_reg = fsl_ssi_volatile_reg, > .precious_reg = fsl_ssi_precious_reg, > .writeable_reg = fsl_ssi_writeable_reg, > - .cache_type = REGCACHE_RBTREE, > }; > > Is this the correct fix? > This will disable register cache so it isn't right. Could you try REGCACHE_FLAT instead, please? Looks like the problem here is rbtree cache does some non-atomic allocations in read / write path when not supplied with default register values. Best regards, Maciej Szmigiero ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Hi Maciej, On Mon, Jan 11, 2016 at 11:57 AM, Maciej S. Szmigiero wrote: > Hi Fabio, > This will disable register cache so it isn't right. > Could you try REGCACHE_FLAT instead, please? Yes, with REGCACHE_FLAT I don't get the warning. Regards, Fabio Estevam ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On 11.01.2016 15:00, Mark Brown wrote: > On Mon, Jan 11, 2016 at 10:10:56AM -0200, Fabio Estevam wrote: >> On Mon, Jan 11, 2016 at 10:04 AM, Fabio Estevam wrote: > >>> [2.526984] [ cut here ] >>> [2.531632] WARNING: CPU: 1 PID: 1 at kernel/locking/lockdep.c:2755 >>> lockdep_trace_alloc+0xf4/0x124() > >> This fixes the warning: > >> --- a/sound/soc/fsl/fsl_ssi.c >> +++ b/sound/soc/fsl/fsl_ssi.c >> @@ -180,7 +180,6 @@ static const struct regmap_config fsl_ssi_regconfig = { >> .volatile_reg = fsl_ssi_volatile_reg, >> .precious_reg = fsl_ssi_precious_reg, >> .writeable_reg = fsl_ssi_writeable_reg, >> - .cache_type = REGCACHE_RBTREE, >> }; > >> Is this the correct fix? > > I suspect not, it looks like the driver is using the cache for > suspend/resume handling. I've dropped the patch for now. Either the > driver should explicitly write to the relevant registers outside of > interrupt context to ensure the cache entry exists or it should keep the > defaults and explicitly write them to hardware at startup to ensure > sync (the former is more likely to be safe). Is it acceptable to switch it to flat cache instead to not keep the register defaults in driver? Maciej ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On Mon, Jan 11, 2016 at 10:10:56AM -0200, Fabio Estevam wrote: > On Mon, Jan 11, 2016 at 10:04 AM, Fabio Estevam wrote: > > [2.526984] [ cut here ] > > [2.531632] WARNING: CPU: 1 PID: 1 at kernel/locking/lockdep.c:2755 > > lockdep_trace_alloc+0xf4/0x124() > This fixes the warning: > --- a/sound/soc/fsl/fsl_ssi.c > +++ b/sound/soc/fsl/fsl_ssi.c > @@ -180,7 +180,6 @@ static const struct regmap_config fsl_ssi_regconfig = { > .volatile_reg = fsl_ssi_volatile_reg, > .precious_reg = fsl_ssi_precious_reg, > .writeable_reg = fsl_ssi_writeable_reg, > - .cache_type = REGCACHE_RBTREE, > }; > Is this the correct fix? I suspect not, it looks like the driver is using the cache for suspend/resume handling. I've dropped the patch for now. Either the driver should explicitly write to the relevant registers outside of interrupt context to ensure the cache entry exists or it should keep the defaults and explicitly write them to hardware at startup to ensure sync (the former is more likely to be safe). signature.asc Description: PGP signature ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On Mon, Jan 11, 2016 at 03:10:20PM +0100, Maciej S. Szmigiero wrote: > On 11.01.2016 15:00, Mark Brown wrote: > > I suspect not, it looks like the driver is using the cache for > > suspend/resume handling. I've dropped the patch for now. Either the > > driver should explicitly write to the relevant registers outside of > > interrupt context to ensure the cache entry exists or it should keep the > > defaults and explicitly write them to hardware at startup to ensure > > sync (the former is more likely to be safe). > Is it acceptable to switch it to flat cache instead to not keep the register > defaults in driver? That's possibly problematic because the flat cache will of necessity end up with defaults (of 0 from the kzalloc()) for all the registers. You'll still have default values in the cache, though some of the behaviour around optimising syncs does change without them explicitly given. It does deal with the allocation issue but given that the issue was incorrect defaults I'd be a bit concerned. signature.asc Description: PGP signature ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Mark Brown wrote: That's possibly problematic because the flat cache will of necessity end up with defaults (of 0 from the kzalloc()) for all the registers. You'll still have default values in the cache, though some of the behaviour around optimising syncs does change without them explicitly given. It does deal with the allocation issue but given that the issue was incorrect defaults I'd be a bit concerned. Ok, I'm confused. Granted, all of this regcache stuff was added after I stopped working on this driver, so I'm out of the loop. But it appears that the regcache cannot properly handle an uninitialized cache. I would expect it to know to perform hard reads of any registers that are uninitialized. If the regcache wants to have an initialized cache, then it should automatically perform reads an all non-volatile, non-precious registers at initialization. ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On Mon, Jan 11, 2016 at 09:45:37AM -0600, Timur Tabi wrote: > Ok, I'm confused. Granted, all of this regcache stuff was added after I > stopped working on this driver, so I'm out of the loop. But it appears that > the regcache cannot properly handle an uninitialized cache. I would expect > it to know to perform hard reads of any registers that are uninitialized. regcache handles this fine, it's perfectly happy to just go and allocate the cache as registers get used (this is why the code that's doing the allocation exists...). What is causing problems here is that the first access to the register is happening in interrupt context so we can't do a GFP_KERNEL allocation for it. Most users don't do anything at all in interrupt context so it's not an issue for them, drivers that want to use regmap in interrupt context need to handle this. We can't rely on knowing which registers are valid and which registers can be read without side effects, it's optional for drivers to provide that information. Even with that information it's not always clear that we want to stop and read every single value when we are initialising the device, that might be excessively slow (remember a lot of regmap devices are I2C or SPI connected, some with large register maps). We should have a helper to do that though for drivers where it does make sense. signature.asc Description: PGP signature ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Mark Brown wrote: regcache handles this fine, it's perfectly happy to just go and allocate the cache as registers get used (this is why the code that's doing the allocation exists...). What is causing problems here is that the first access to the register is happening in interrupt context so we can't do a GFP_KERNEL allocation for it. Considering how small and not-sparse the SSI register space is, would using REGCACHE_FLAT be appropriate? ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On Mon, Jan 11, 2016 at 07:23:54PM -0600, Timur Tabi wrote: > Mark Brown wrote: > >regcache handles this fine, it's perfectly happy to just go and allocate > >the cache as registers get used (this is why the code that's doing the > >allocation exists...). What is causing problems here is that the first > >access to the register is happening in interrupt context so we can't do > >a GFP_KERNEL allocation for it. > Considering how small and not-sparse the SSI register space is, would using > REGCACHE_FLAT be appropriate? Quite possibly (it'll be more efficient and it's intended for such use cases) but as I said in my other reply that then has the issue that it implicitly gives default values to all the registers so I'd expect we still need to handle the cache initialisation explicitly (or alternatively the hardware sync with the cache on startup). signature.asc Description: PGP signature ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Mark Brown wrote: Quite possibly (it'll be more efficient and it's intended for such use cases) but as I said in my other reply that then has the issue that it implicitly gives default values to all the registers so I'd expect we still need to handle the cache initialisation explicitly (or alternatively the hardware sync with the cache on startup). Why does REGCACHE_FLAT assume that all registers have a default value of 0? Shouldn't it have the same behavior w.r.t. cache values as REGCACHE_RBTREE? ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Hi Fabio, On 11.01.2016 15:05, Fabio Estevam wrote: > Hi Maciej, > > On Mon, Jan 11, 2016 at 11:57 AM, Maciej S. Szmigiero > wrote: >> Hi Fabio, > >> This will disable register cache so it isn't right. >> Could you try REGCACHE_FLAT instead, please? > > Yes, with REGCACHE_FLAT I don't get the warning. > > Regards, Is it possible for you to test the following updated patch? diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 40dfd8a36484..16ee5745c992 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -112,20 +112,6 @@ struct fsl_ssi_rxtx_reg_val { struct fsl_ssi_reg_val tx; }; -static const struct reg_default fsl_ssi_reg_defaults[] = { - {CCSR_SSI_SCR, 0x}, - {CCSR_SSI_SIER,0x3003}, - {CCSR_SSI_STCR,0x0200}, - {CCSR_SSI_SRCR,0x0200}, - {CCSR_SSI_STCCR, 0x0004}, - {CCSR_SSI_SRCCR, 0x0004}, - {CCSR_SSI_SACNT, 0x}, - {CCSR_SSI_STMSK, 0x}, - {CCSR_SSI_SRMSK, 0x}, - {CCSR_SSI_SACCEN, 0x}, - {CCSR_SSI_SACCDIS, 0x}, -}; - static bool fsl_ssi_readable_reg(struct device *dev, unsigned int reg) { switch (reg) { @@ -184,14 +170,27 @@ static bool fsl_ssi_writeable_reg(struct device *dev, unsigned int reg) } } +static const struct regmap_config fsl_ssi_regconfig_imx21 = { + .max_register = CCSR_SSI_SRMSK, + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .val_format_endian = REGMAP_ENDIAN_NATIVE, + .num_reg_defaults_raw = CCSR_SSI_SRMSK / 4 + 1, + .readable_reg = fsl_ssi_readable_reg, + .volatile_reg = fsl_ssi_volatile_reg, + .precious_reg = fsl_ssi_precious_reg, + .writeable_reg = fsl_ssi_writeable_reg, + .cache_type = REGCACHE_RBTREE, +}; + static const struct regmap_config fsl_ssi_regconfig = { .max_register = CCSR_SSI_SACCDIS, .reg_bits = 32, .val_bits = 32, .reg_stride = 4, .val_format_endian = REGMAP_ENDIAN_NATIVE, - .reg_defaults = fsl_ssi_reg_defaults, - .num_reg_defaults = ARRAY_SIZE(fsl_ssi_reg_defaults), + .num_reg_defaults_raw = CCSR_SSI_SACCDIS / 4 + 1, .readable_reg = fsl_ssi_readable_reg, .volatile_reg = fsl_ssi_volatile_reg, .precious_reg = fsl_ssi_precious_reg, @@ -201,6 +200,7 @@ static const struct regmap_config fsl_ssi_regconfig = { struct fsl_ssi_soc_data { bool imx; + bool imx21regs; bool offline_config; u32 sisr_write_mask; }; @@ -295,6 +295,7 @@ struct fsl_ssi_private { static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = { .imx = false, + .imx21regs = false, .offline_config = true, .sisr_write_mask = CCSR_SSI_SISR_RFRC | CCSR_SSI_SISR_TFRC | CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 | @@ -303,12 +304,14 @@ static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = { static struct fsl_ssi_soc_data fsl_ssi_imx21 = { .imx = true, + .imx21regs = true, .offline_config = true, .sisr_write_mask = 0, }; static struct fsl_ssi_soc_data fsl_ssi_imx35 = { .imx = true, + .imx21regs = false, .offline_config = true, .sisr_write_mask = CCSR_SSI_SISR_RFRC | CCSR_SSI_SISR_TFRC | CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 | @@ -317,6 +320,7 @@ static struct fsl_ssi_soc_data fsl_ssi_imx35 = { static struct fsl_ssi_soc_data fsl_ssi_imx51 = { .imx = true, + .imx21regs = false, .offline_config = false, .sisr_write_mask = CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 | CCSR_SSI_SISR_TUE0 | CCSR_SSI_SISR_TUE1, @@ -586,8 +590,11 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi_private *ssi_private) */ regmap_write(regs, CCSR_SSI_SACNT, CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV); - regmap_write(regs, CCSR_SSI_SACCDIS, 0xff); - regmap_write(regs, CCSR_SSI_SACCEN, 0x300); + + if (!ssi_private->soc->imx21regs) { + regmap_write(regs, CCSR_SSI_SACCDIS, 0xff); + regmap_write(regs, CCSR_SSI_SACCEN, 0x300); + } /* * Enable SSI, Transmit and Receive. AC97 has to communicate with the @@ -1397,6 +1404,7 @@ static int fsl_ssi_probe(struct platform_device *pdev) struct resource *res; void __iomem *iomem; char name[64]; + const struct regmap_config *regconfig; of_id = of_match_device(fsl_ssi_ids, &pdev->dev); if (!of_id || !of_id->data) @@ -1444,15 +1452,21 @@ static int fsl_ssi_probe(struct platform_device *pdev) return PTR_ERR(iomem); ssi_private->ssi_phys = res->start; + if (ssi_private->soc->imx21regs) + regconfig = &fsl_ssi_regconfig_imx21; + else + regconfig = &fsl_ssi_regconfig; + ret = of_property_match_stri
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Maciej S. Szmigiero wrote: +static const struct regmap_config fsl_ssi_regconfig_imx21 = { + .max_register = CCSR_SSI_SRMSK, + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .val_format_endian = REGMAP_ENDIAN_NATIVE, + .num_reg_defaults_raw = CCSR_SSI_SRMSK / 4 + 1, + .readable_reg = fsl_ssi_readable_reg, + .volatile_reg = fsl_ssi_volatile_reg, + .precious_reg = fsl_ssi_precious_reg, + .writeable_reg = fsl_ssi_writeable_reg, + .cache_type = REGCACHE_RBTREE, +}; + static const struct regmap_config fsl_ssi_regconfig = { .max_register = CCSR_SSI_SACCDIS, .reg_bits = 32, .val_bits = 32, .reg_stride = 4, .val_format_endian = REGMAP_ENDIAN_NATIVE, - .reg_defaults = fsl_ssi_reg_defaults, - .num_reg_defaults = ARRAY_SIZE(fsl_ssi_reg_defaults), + .num_reg_defaults_raw = CCSR_SSI_SACCDIS / 4 + 1, .readable_reg = fsl_ssi_readable_reg, .volatile_reg = fsl_ssi_volatile_reg, .precious_reg = fsl_ssi_precious_reg, Is this really necessary? Why do we need separate register configs for one specific SOC? There are already too many "if (some_stupid_imx_variant)" blocks in this driver. ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On 17.01.2016 01:10, Timur Tabi wrote: > Maciej S. Szmigiero wrote: >> +static const struct regmap_config fsl_ssi_regconfig_imx21 = { >> +.max_register = CCSR_SSI_SRMSK, >> +.reg_bits = 32, >> +.val_bits = 32, >> +.reg_stride = 4, >> +.val_format_endian = REGMAP_ENDIAN_NATIVE, >> +.num_reg_defaults_raw = CCSR_SSI_SRMSK / 4 + 1, >> +.readable_reg = fsl_ssi_readable_reg, >> +.volatile_reg = fsl_ssi_volatile_reg, >> +.precious_reg = fsl_ssi_precious_reg, >> +.writeable_reg = fsl_ssi_writeable_reg, >> +.cache_type = REGCACHE_RBTREE, >> +}; >> + >> static const struct regmap_config fsl_ssi_regconfig = { >> .max_register = CCSR_SSI_SACCDIS, >> .reg_bits = 32, >> .val_bits = 32, >> .reg_stride = 4, >> .val_format_endian = REGMAP_ENDIAN_NATIVE, >> -.reg_defaults = fsl_ssi_reg_defaults, >> -.num_reg_defaults = ARRAY_SIZE(fsl_ssi_reg_defaults), >> +.num_reg_defaults_raw = CCSR_SSI_SACCDIS / 4 + 1, >> .readable_reg = fsl_ssi_readable_reg, >> .volatile_reg = fsl_ssi_volatile_reg, >> .precious_reg = fsl_ssi_precious_reg, > > Is this really necessary? Why do we need separate register configs for one > specific SOC? > There are already too many "if (some_stupid_imx_variant)" blocks in this > driver. This is because (at least according to the datasheet) imx21-class SSI registers end at CCSR_SSI_SRMSK (no SACC{ST,EN,DIS} regs), so reading them for cache initialization may not be safe. Also, a "MXC 91221 only" comment before these regs in FSL tree (drivers/mxc/ssi/registers.h) seems to confirm that these registers aren't present at least on some SSI (or SoC) models. Best regards, Maciej Szmigiero ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Maciej S. Szmigiero wrote: This is because (at least according to the datasheet) imx21-class SSI registers end at CCSR_SSI_SRMSK (no SACC{ST,EN,DIS} regs), so reading them for cache initialization may not be safe. Also, a "MXC 91221 only" comment before these regs in FSL tree (drivers/mxc/ssi/registers.h) seems to confirm that these registers aren't present at least on some SSI (or SoC) models. Can't we just mark them as precious or something, so that we don't have to have two structures? ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On 17.01.2016 06:16, Timur Tabi wrote: > Maciej S. Szmigiero wrote: >> This is because (at least according to the datasheet) imx21-class SSI >> registers end at CCSR_SSI_SRMSK (no SACC{ST,EN,DIS} regs), so >> reading them for cache initialization may not be safe. >> >> Also, a "MXC 91221 only" comment before these regs in FSL tree >> (drivers/mxc/ssi/registers.h) seems to confirm that these registers >> aren't present at least on some SSI (or SoC) models. > > Can't we just mark them as precious or something, so that we don't have to > have two structures? Looks like it can be done with just one static regmap config struct used then as template - I will post updated patch. Maciej ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On 17.01.2016 15:16, Maciej S. Szmigiero wrote: > On 17.01.2016 06:16, Timur Tabi wrote: >> Maciej S. Szmigiero wrote: >>> This is because (at least according to the datasheet) imx21-class SSI >>> registers end at CCSR_SSI_SRMSK (no SACC{ST,EN,DIS} regs), so >>> reading them for cache initialization may not be safe. >>> >>> Also, a "MXC 91221 only" comment before these regs in FSL tree >>> (drivers/mxc/ssi/registers.h) seems to confirm that these registers >>> aren't present at least on some SSI (or SoC) models. >> >> Can't we just mark them as precious or something, so that we don't have to >> have two structures? > > Looks like it can be done with just one static regmap config struct > used then as template - I will post updated patch. Updated patch: diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 40dfd8a36484..105de76dd2fc 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -112,20 +112,6 @@ struct fsl_ssi_rxtx_reg_val { struct fsl_ssi_reg_val tx; }; -static const struct reg_default fsl_ssi_reg_defaults[] = { - {CCSR_SSI_SCR, 0x}, - {CCSR_SSI_SIER,0x3003}, - {CCSR_SSI_STCR,0x0200}, - {CCSR_SSI_SRCR,0x0200}, - {CCSR_SSI_STCCR, 0x0004}, - {CCSR_SSI_SRCCR, 0x0004}, - {CCSR_SSI_SACNT, 0x}, - {CCSR_SSI_STMSK, 0x}, - {CCSR_SSI_SRMSK, 0x}, - {CCSR_SSI_SACCEN, 0x}, - {CCSR_SSI_SACCDIS, 0x}, -}; - static bool fsl_ssi_readable_reg(struct device *dev, unsigned int reg) { switch (reg) { @@ -190,8 +176,7 @@ static const struct regmap_config fsl_ssi_regconfig = { .val_bits = 32, .reg_stride = 4, .val_format_endian = REGMAP_ENDIAN_NATIVE, - .reg_defaults = fsl_ssi_reg_defaults, - .num_reg_defaults = ARRAY_SIZE(fsl_ssi_reg_defaults), + .num_reg_defaults_raw = CCSR_SSI_SACCDIS / 4 + 1, .readable_reg = fsl_ssi_readable_reg, .volatile_reg = fsl_ssi_volatile_reg, .precious_reg = fsl_ssi_precious_reg, @@ -201,6 +186,7 @@ static const struct regmap_config fsl_ssi_regconfig = { struct fsl_ssi_soc_data { bool imx; + bool imx21regs; bool offline_config; u32 sisr_write_mask; }; @@ -295,6 +281,7 @@ struct fsl_ssi_private { static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = { .imx = false, + .imx21regs = false, .offline_config = true, .sisr_write_mask = CCSR_SSI_SISR_RFRC | CCSR_SSI_SISR_TFRC | CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 | @@ -303,12 +290,14 @@ static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = { static struct fsl_ssi_soc_data fsl_ssi_imx21 = { .imx = true, + .imx21regs = true, .offline_config = true, .sisr_write_mask = 0, }; static struct fsl_ssi_soc_data fsl_ssi_imx35 = { .imx = true, + .imx21regs = false, .offline_config = true, .sisr_write_mask = CCSR_SSI_SISR_RFRC | CCSR_SSI_SISR_TFRC | CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 | @@ -317,6 +306,7 @@ static struct fsl_ssi_soc_data fsl_ssi_imx35 = { static struct fsl_ssi_soc_data fsl_ssi_imx51 = { .imx = true, + .imx21regs = false, .offline_config = false, .sisr_write_mask = CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 | CCSR_SSI_SISR_TUE0 | CCSR_SSI_SISR_TUE1, @@ -586,8 +576,11 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi_private *ssi_private) */ regmap_write(regs, CCSR_SSI_SACNT, CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV); - regmap_write(regs, CCSR_SSI_SACCDIS, 0xff); - regmap_write(regs, CCSR_SSI_SACCEN, 0x300); + + if (!ssi_private->soc->imx21regs) { + regmap_write(regs, CCSR_SSI_SACCDIS, 0xff); + regmap_write(regs, CCSR_SSI_SACCEN, 0x300); + } /* * Enable SSI, Transmit and Receive. AC97 has to communicate with the @@ -1397,6 +1390,7 @@ static int fsl_ssi_probe(struct platform_device *pdev) struct resource *res; void __iomem *iomem; char name[64]; + struct regmap_config regconfig = fsl_ssi_regconfig; of_id = of_match_device(fsl_ssi_ids, &pdev->dev); if (!of_id || !of_id->data) @@ -1444,15 +1438,22 @@ static int fsl_ssi_probe(struct platform_device *pdev) return PTR_ERR(iomem); ssi_private->ssi_phys = res->start; + if (ssi_private->soc->imx21regs) { + /* According to datasheet imx21-class SSI have less regs */ + regconfig.max_register = CCSR_SSI_SRMSK; + regconfig.num_reg_defaults_raw = CCSR_SSI_SRMSK / 4 + 1; + } + ret = of_property_match_string(np, "clock-names", "ipg"); if (ret < 0) { ssi_private->has_ipg_clk_name = false; ssi_private->regs = devm_regmap_init_mmio(&pdev->
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Maciej S. Szmigiero wrote: On 17.01.2016 15:16, Maciej S. Szmigiero wrote: On 17.01.2016 06:16, Timur Tabi wrote: Maciej S. Szmigiero wrote: This is because (at least according to the datasheet) imx21-class SSI registers end at CCSR_SSI_SRMSK (no SACC{ST,EN,DIS} regs), so reading them for cache initialization may not be safe. Also, a "MXC 91221 only" comment before these regs in FSL tree (drivers/mxc/ssi/registers.h) seems to confirm that these registers aren't present at least on some SSI (or SoC) models. Can't we just mark them as precious or something, so that we don't have to have two structures? Looks like it can be done with just one static regmap config struct used then as template - I will post updated patch. Updated patch: diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 40dfd8a36484..105de76dd2fc 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -112,20 +112,6 @@ struct fsl_ssi_rxtx_reg_val { struct fsl_ssi_reg_val tx; }; -static const struct reg_default fsl_ssi_reg_defaults[] = { - {CCSR_SSI_SCR, 0x}, - {CCSR_SSI_SIER,0x3003}, - {CCSR_SSI_STCR,0x0200}, - {CCSR_SSI_SRCR,0x0200}, - {CCSR_SSI_STCCR, 0x0004}, - {CCSR_SSI_SRCCR, 0x0004}, - {CCSR_SSI_SACNT, 0x}, - {CCSR_SSI_STMSK, 0x}, - {CCSR_SSI_SRMSK, 0x}, - {CCSR_SSI_SACCEN, 0x}, - {CCSR_SSI_SACCDIS, 0x}, -}; - static bool fsl_ssi_readable_reg(struct device *dev, unsigned int reg) { switch (reg) { @@ -190,8 +176,7 @@ static const struct regmap_config fsl_ssi_regconfig = { .val_bits = 32, .reg_stride = 4, .val_format_endian = REGMAP_ENDIAN_NATIVE, - .reg_defaults = fsl_ssi_reg_defaults, - .num_reg_defaults = ARRAY_SIZE(fsl_ssi_reg_defaults), + .num_reg_defaults_raw = CCSR_SSI_SACCDIS / 4 + 1, Replace "4" with "sizeof(uint32_t). .readable_reg = fsl_ssi_readable_reg, .volatile_reg = fsl_ssi_volatile_reg, .precious_reg = fsl_ssi_precious_reg, @@ -201,6 +186,7 @@ static const struct regmap_config fsl_ssi_regconfig = { struct fsl_ssi_soc_data { bool imx; + bool imx21regs; Please add a comment explaining why this is needed. bool offline_config; u32 sisr_write_mask; }; @@ -295,6 +281,7 @@ struct fsl_ssi_private { static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = { .imx = false, + .imx21regs = false, This is unnecessary. The default is already 0 (false). .offline_config = true, .sisr_write_mask = CCSR_SSI_SISR_RFRC | CCSR_SSI_SISR_TFRC | CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 | @@ -303,12 +290,14 @@ static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = { static struct fsl_ssi_soc_data fsl_ssi_imx21 = { .imx = true, + .imx21regs = true, .offline_config = true, .sisr_write_mask = 0, }; static struct fsl_ssi_soc_data fsl_ssi_imx35 = { .imx = true, + .imx21regs = false, Same here. .offline_config = true, .sisr_write_mask = CCSR_SSI_SISR_RFRC | CCSR_SSI_SISR_TFRC | CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 | @@ -317,6 +306,7 @@ static struct fsl_ssi_soc_data fsl_ssi_imx35 = { static struct fsl_ssi_soc_data fsl_ssi_imx51 = { .imx = true, + .imx21regs = false, .offline_config = false, .sisr_write_mask = CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 | CCSR_SSI_SISR_TUE0 | CCSR_SSI_SISR_TUE1, @@ -586,8 +576,11 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi_private *ssi_private) */ regmap_write(regs, CCSR_SSI_SACNT, CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV); - regmap_write(regs, CCSR_SSI_SACCDIS, 0xff); - regmap_write(regs, CCSR_SSI_SACCEN, 0x300); + + if (!ssi_private->soc->imx21regs) { + regmap_write(regs, CCSR_SSI_SACCDIS, 0xff); + regmap_write(regs, CCSR_SSI_SACCEN, 0x300); + } This needs a comment. /* * Enable SSI, Transmit and Receive. AC97 has to communicate with the @@ -1397,6 +1390,7 @@ static int fsl_ssi_probe(struct platform_device *pdev) struct resource *res; void __iomem *iomem; char name[64]; + struct regmap_config regconfig = fsl_ssi_regconfig; of_id = of_match_device(fsl_ssi_ids, &pdev->dev); if (!of_id || !of_id->data) @@ -1444,15 +1438,22 @@ static int fsl_ssi_probe(struct platform_device *pdev) return PTR_ERR(iomem); ssi_private->ssi_phys = res->start; + if (ssi_private->soc->imx21regs) { + /* According to datasheet imx21-class SSI have less regs */ First of all, it would be "fewer regs", but even better would be to say that certain regs don't exist. However, I wonder if this patch is necessary at all. If
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
On 17.01.2016 19:38, Timur Tabi wrote: > Maciej S. Szmigiero wrote: >> On 17.01.2016 15:16, Maciej S. Szmigiero wrote: >>> On 17.01.2016 06:16, Timur Tabi wrote: Maciej S. Szmigiero wrote: > This is because (at least according to the datasheet) imx21-class SSI > registers end at CCSR_SSI_SRMSK (no SACC{ST,EN,DIS} regs), so > reading them for cache initialization may not be safe. > > Also, a "MXC 91221 only" comment before these regs in FSL tree > (drivers/mxc/ssi/registers.h) seems to confirm that these registers > aren't present at least on some SSI (or SoC) models. Can't we just mark them as precious or something, so that we don't have to have two structures? >>> >>> Looks like it can be done with just one static regmap config struct >>> used then as template - I will post updated patch. Patch updated according to Timur's suggestions (needs regmap fix): diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 40dfd8a36484..ed8de1035cda 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -112,20 +112,6 @@ struct fsl_ssi_rxtx_reg_val { struct fsl_ssi_reg_val tx; }; -static const struct reg_default fsl_ssi_reg_defaults[] = { - {CCSR_SSI_SCR, 0x}, - {CCSR_SSI_SIER,0x3003}, - {CCSR_SSI_STCR,0x0200}, - {CCSR_SSI_SRCR,0x0200}, - {CCSR_SSI_STCCR, 0x0004}, - {CCSR_SSI_SRCCR, 0x0004}, - {CCSR_SSI_SACNT, 0x}, - {CCSR_SSI_STMSK, 0x}, - {CCSR_SSI_SRMSK, 0x}, - {CCSR_SSI_SACCEN, 0x}, - {CCSR_SSI_SACCDIS, 0x}, -}; - static bool fsl_ssi_readable_reg(struct device *dev, unsigned int reg) { switch (reg) { @@ -190,8 +176,7 @@ static const struct regmap_config fsl_ssi_regconfig = { .val_bits = 32, .reg_stride = 4, .val_format_endian = REGMAP_ENDIAN_NATIVE, - .reg_defaults = fsl_ssi_reg_defaults, - .num_reg_defaults = ARRAY_SIZE(fsl_ssi_reg_defaults), + .num_reg_defaults_raw = CCSR_SSI_SACCDIS / sizeof(uint32_t) + 1, .readable_reg = fsl_ssi_readable_reg, .volatile_reg = fsl_ssi_volatile_reg, .precious_reg = fsl_ssi_precious_reg, @@ -201,6 +186,7 @@ static const struct regmap_config fsl_ssi_regconfig = { struct fsl_ssi_soc_data { bool imx; + bool imx21regs; /* imx21-class SSI - no SACC{ST,EN,DIS} regs */ bool offline_config; u32 sisr_write_mask; }; @@ -303,6 +289,7 @@ static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = { static struct fsl_ssi_soc_data fsl_ssi_imx21 = { .imx = true, + .imx21regs = true, .offline_config = true, .sisr_write_mask = 0, }; @@ -586,8 +573,12 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi_private *ssi_private) */ regmap_write(regs, CCSR_SSI_SACNT, CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV); - regmap_write(regs, CCSR_SSI_SACCDIS, 0xff); - regmap_write(regs, CCSR_SSI_SACCEN, 0x300); + + /* no SACC{ST,EN,DIS} regs on imx21-class SSI */ + if (!ssi_private->soc->imx21regs) { + regmap_write(regs, CCSR_SSI_SACCDIS, 0xff); + regmap_write(regs, CCSR_SSI_SACCEN, 0x300); + } /* * Enable SSI, Transmit and Receive. AC97 has to communicate with the @@ -1397,6 +1388,7 @@ static int fsl_ssi_probe(struct platform_device *pdev) struct resource *res; void __iomem *iomem; char name[64]; + struct regmap_config regconfig = fsl_ssi_regconfig; of_id = of_match_device(fsl_ssi_ids, &pdev->dev); if (!of_id || !of_id->data) @@ -1444,15 +1436,25 @@ static int fsl_ssi_probe(struct platform_device *pdev) return PTR_ERR(iomem); ssi_private->ssi_phys = res->start; + if (ssi_private->soc->imx21regs) { + /* +* According to datasheet imx21-class SSI +* don't have SACC{ST,EN,DIS} regs. +*/ + regconfig.max_register = CCSR_SSI_SRMSK; + regconfig.num_reg_defaults_raw = + CCSR_SSI_SRMSK / sizeof(uint32_t) + 1; + } + ret = of_property_match_string(np, "clock-names", "ipg"); if (ret < 0) { ssi_private->has_ipg_clk_name = false; ssi_private->regs = devm_regmap_init_mmio(&pdev->dev, iomem, - &fsl_ssi_regconfig); + ®config); } else { ssi_private->has_ipg_clk_name = true; ssi_private->regs = devm_regmap_init_mmio_clk(&pdev->dev, - "ipg", iomem, &fsl_ssi_regconfig); + "ipg", iomem, ®config); } if (IS_ERR(ssi_private->regs)) { dev_err(&pdev->dev, "Failed to init register map\n"); > However, I wonder if this patch is necessary at all. > If the r
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Hi Maciej, On Sun, Jan 17, 2016 at 8:02 PM, Maciej S. Szmigiero wrote: > Patch updated according to Timur's suggestions (needs regmap fix): > diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c Tested your patch against linux-next and it did not give me any warnings: Tested-by: Fabio Estevam ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
Re: [PATCH 3/3] ASoC: fsl_ssi: remove register defaults
Hi Fabio, On 18.01.2016 13:51, Fabio Estevam wrote: > Hi Maciej, > > On Sun, Jan 17, 2016 at 8:02 PM, Maciej S. Szmigiero > wrote: > >> Patch updated according to Timur's suggestions (needs regmap fix): >> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c > > Tested your patch against linux-next and it did not give me any warnings: > > Tested-by: Fabio Estevam Thanks for testing, I have submitted this version now. Maciej ___ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev