Le 22/06/2023 à 13:48, Peter Zijlstra a écrit :
> On Thu, Jun 22, 2023 at 12:54:32PM +0200, Christophe Leroy wrote:
>> On powerpc, switch tables are relative, than means the address of the
>> table is added to the value of the entry in order to get the pointed
>> address: (r10 is the table address, r4 the index in the table)
>>
>>lis r10,0 <== Load r10 with upper part of .rodata address
>>R_PPC_ADDR16_HA .rodata
>>addir10,r10,0 <== Add lower part of .rodata address
>>R_PPC_ADDR16_LO .rodata
>>lwzxr8,r10,r4 <== Read table entry at r10 + r4 into r8
>>add r10,r8,r10<== Add table address to read value
>>mtctr r10 <== Save calculated address in CTR
>>bctr <== Branch to address in CTR
>>
>> But for c_jump_tables it is not the case, they contain the
>> pointed address directly:
>>
>>lis r28,0 <== Load r28 with upper .rodata..c_jump_table
>>R_PPC_ADDR16_HA .rodata..c_jump_table
>>addir28,r28,0 <== Add lower part of
>> .rodata..c_jump_table
>>R_PPC_ADDR16_LO .rodata..c_jump_table
>>lwzxr10,r28,r10 <== Read table entry at r10 + r28 into r10
>>mtctr r10 <== Save read value in CTR
>>bctr <== Branch to address in CTR
>>
>> Add support to objtool for relative tables, with a flag in order to
>> tell table by table if that table uses relative or absolute addressing.
>>
>> And use correct size for 'long' instead of hard coding a size of '8'.
>
> Again, see tip/objtool/core...
>
> This one is going to be a little hard. It would be very good if you can
> avoid growing struct reloc; Josh went through a ton of effort to shrink
> it.
>
> Would it work to use reloc->sym->is_rel_jumptable ? That still has a few
> spare bits in it's bitfield.
>
I noticed that the relocation types are different, so the flag is indeed
not needed. I have now done the following, will it work for x86 ?
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index ae4a1608d97e..05d789e6d3b6 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -1988,7 +1988,7 @@ static int add_jump_table(struct objtool_file
*file, struct instruction *insn,
struct symbol *pfunc = insn_func(insn)->pfunc;
struct reloc *table = insn_jump_table(insn);
struct instruction *dest_insn;
- unsigned int prev_offset = 0;
+ unsigned int offset, prev_offset = 0;
struct reloc *reloc = table;
struct alternative *alt;
@@ -2003,7 +2003,7 @@ static int add_jump_table(struct objtool_file
*file, struct instruction *insn,
break;
/* Make sure the table entries are consecutive: */
- if (prev_offset && reloc_offset(reloc) != prev_offset + 8)
+ if (prev_offset && reloc_offset(reloc) != prev_offset +
elf_addr_size(file->elf))
break;
/* Detect function pointers from contiguous objects: */
@@ -2011,7 +2011,12 @@ static int add_jump_table(struct objtool_file
*file, struct instruction *insn,
reloc_addend(reloc) == pfunc->offset)
break;
- dest_insn = find_insn(file, reloc->sym->sec,
reloc_addend(reloc));
+ if (reloc_type(reloc) == R_ABS32 || reloc_type(reloc) ==
R_ABS64)
+ offset = reloc_addend(reloc);
+ else
+ offset = reloc_addend(reloc) + reloc_offset(table) -
reloc_offset(reloc);
+
+ dest_insn = find_insn(file, reloc->sym->sec, offset);
if (!dest_insn)
break;
Christophe
