2.6 support for MPC8541(e)
Hi! I had to do the same for my MPC8540 board (Microsys PM854). It's based on the MPC8540_ADS platform, too with changes in PCI subsystem and Gigabit Ethernet (gianfar_phy). Enable early serial and enjoy printk. Try to find out, where it hangs. Greets, Clemens Koller ___ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Str. 45/1 81379 Muenchen Germany http://www.anagramm.de Phone: +49-89-741518-50 Fax: +49-89-741518-19 Kumar Gala wrote: > You probably need to port the platform code from 2.4 to 2.6 for this > board. I'm guessing you are running into some PCI config issue with > interrupts and the such. > > Take a look at arch/ppc/platforms/85xx/* for examples of boards that > support 85xx processors. > > - kumar > > On Jun 28, 2005, at 9:03 AM, > wrote: > >> I've recently received a GDA PCI-G8400 evaluation board with an >> MPC8541E. It came with u-boot 1.1.2 and a 2.4.27 kernel. >> >> Our hopes are to get a 2.6 kernel running on this device so it is in >> sync with out MPC8248 based boards. >> >> What is the status of the support for these chips? When I enable >> CONFIG_SERIAL_TEXT_DEBUG I'm able to get some output, it seems to die >> when initializing openpic. There also appears to be issues with the >> serial console as I'm not getting printk output at all, and I think I >> should be by the time start_kernel is entered. >> >> My current 2.6.12 builds use the MPC8540_ADS configs as a base. The >> 2.4 that was received with the board does as well. >> >> For now I'm not concerned with the 'E' part. My main job is to >> actually add support for the security engine, but I'd like to get 2.6 >> up and running first. Yes, this is my first jump into machine >> specific code.. >> >> Thanks. >> >> ___ >> Linuxppc-embedded mailing list >> Linuxppc-embedded at ozlabs.org >> https://ozlabs.org/mailman/listinfo/linuxppc-embedded >> > > ___ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded >
2.6 support for MPC8541(e)
You probably need to port the platform code from 2.4 to 2.6 for this board. I'm guessing you are running into some PCI config issue with interrupts and the such. Take a look at arch/ppc/platforms/85xx/* for examples of boards that support 85xx processors. - kumar On Jun 28, 2005, at 9:03 AM, wrote: > I've recently received a GDA PCI-G8400 evaluation board with an > MPC8541E. It came with u-boot 1.1.2 and a 2.4.27 kernel. > > Our hopes are to get a 2.6 kernel running on this device so it is in > sync with out MPC8248 based boards. > > What is the status of the support for these chips? When I enable > CONFIG_SERIAL_TEXT_DEBUG I'm able to get some output, it seems to die > when initializing openpic. There also appears to be issues with the > serial console as I'm not getting printk output at all, and I think I > should be by the time start_kernel is entered. > > My current 2.6.12 builds use the MPC8540_ADS configs as a base. The > 2.4 that was received with the board does as well. > > For now I'm not concerned with the 'E' part. My main job is to > actually add support for the security engine, but I'd like to get 2.6 > up and running first. Yes, this is my first jump into machine > specific code.. > > Thanks. > > ___ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded >
2.6 support for MPC8541(e)
I've recently received a GDA PCI-G8400 evaluation board with an MPC8541E. It came with u-boot 1.1.2 and a 2.4.27 kernel. Our hopes are to get a 2.6 kernel running on this device so it is in sync with out MPC8248 based boards. What is the status of the support for these chips? When I enable CONFIG_SERIAL_TEXT_DEBUG I'm able to get some output, it seems to die when initializing openpic. There also appears to be issues with the serial console as I'm not getting printk output at all, and I think I should be by the time start_kernel is entered. My current 2.6.12 builds use the MPC8540_ADS configs as a base. The 2.4 that was received with the board does as well. For now I'm not concerned with the 'E' part. My main job is to actually add support for the security engine, but I'd like to get 2.6 up and running first. Yes, this is my first jump into machine specific code.. Thanks.