Re: [ElectricMotorcycles] finally
i've got #50 chain for 'drag racing'... it might be over kill but i was
protyping a new chain setup and its a hard tail with zero shock absorbtion
[i.e. no rubber bushing on the wheel sprocket, etc...] the motor sprockets i
got from thunderstruck-ev.com, i've not had an issue with them in the past?
harry
Albuquerque, NM
http://www.austinev.org/evalbum/1179
http://geocities.com/solarcookingman
--- On Thu, 7/31/08, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
Subject: Re: [ElectricMotorcycles] finally
To: listserv@electricmotorcycles.net
Date: Thursday, July 31, 2008, 9:45 AM
Hello Damon,
I had the same issues with sprocket set screws loosening up. I dimpled
(recessed with a drill) the motor shaft, used both set screws, and locktite.
That solved my problem.
I believe that some of the excess noise on my bike is related to the metric
chain not lining up on the small american sprocket quite right. I guess what I
am aluding to is a believe that a #40 sprocket does not mate well with a 5xx or
4xx chain. What are you using Harry?
BTW I had my off the shelf #40(?) sprocket machined at a machine shop (it is
hardend steel) to taper in the teeth like the rear. Cost me all of 5 bucks. It
is still very noisy and alignment is critical.
- Mike B.
-Original Message-
From: damon henry [EMAIL PROTECTED]
To: ElectricMotorcycles listserv@electricmotorcycles.net
Sent: Thu, 31 Jul 2008 9:29 am
Subject: Re: [ElectricMotorcycles] finally
#yiv1614630813 #AOLMsgPart_2_c25ce481-767c-4b1d-bf12-787eda6392d7 .hmmessage
P{margin:0px;padding:0px;}#yiv1614630813
#AOLMsgPart_2_c25ce481-767c-4b1d-bf12-787eda6392d7
body.hmmessage{FONT-SIZE:10pt;FONT-FAMILY:Tahoma;}
My only sprocket loosening issues were when set screws loosened. It's been a
few years since I've had that happen.
damon
Date: Thu, 31 Jul 2008 07:09:07 -0700
From: [EMAIL PROTECTED]
To: listserv@electricmotorcycles.net
Subject: [ElectricMotorcycles] finally
i finally got my bike registered, if you make your home built talk with the
person in charge at the DMV, don't waste your time with the clerks, i was told
five different things before i was done!
now that i'm legal i've got another issue, a strange noise, i hope its my top
motor sprocket. somehow the bore has gotten bigger and now its very lose on
the motor shaft. the bottom motor sprocket is still snug. has anyone else had
an issue with the motor sprocket becoming lose?
some ideas i have: 1, the top motor could be doing most the the initial work
since the wheel sprocket goes to it first? 2, some how the chain is out of
alignment? [though i'm not sure about that since both motors are on the same
1/4 alum plate?
harry
Albuquerque, NM
http://www.austinev.org/evalbum/1179
http://geocities.com/solarcookingman
--- On Sun, 7/27/08, lyle sloan [EMAIL PROTECTED] wrote:
From: lyle sloan [EMAIL PROTECTED]
Subject: Re: [ElectricMotorcycles] List of Venders?
To: ElectricMotorcycles listserv@electricmotorcycles.net
Date: Sunday, July 27, 2008, 1:33 PM
http://www.enertiabike.com/
Under the reserve now, it has a configure and buy page, but wants personal
contact information. So cannot confirm shipping,yet. will have to talk to a
rep to confirm.
--- On Sun, 7/27/08, Mike [EMAIL PROTECTED] wrote:
From: Mike [EMAIL PROTECTED]
Subject: Re: [ElectricMotorcycles] List of Venders?
To: ElectricMotorcycles
listserv@electricmotorcycles.net
Date: Sunday, July 27, 2008, 1:24 PM
Also the Enertia from Brammo
http://www.brammo.com/http://www.brammo.com/
Does anyone know if they're actually shipping? I
should have stipulated that the list is for companies that
are actually shipping.
Mike
--
The Electric Motorcycle Portal
http://www.electricmotorcycles.net/
Electric Motorcycle Listserv
http://www.electricmotorcycles.net/listserv
Stay in touch when you're away with Windows Live Messenger. IM anytime you're
online.=
The Famous, the Infamous, the Lame - in your browser. Get the TMZ Toolbar Now!
Re: [ElectricMotorcycles] finally
My only sprocket loosening issues were when set screws loosened. It's been a few years since I've had that happen. damon Date: Thu, 31 Jul 2008 07:09:07 -0700From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: [ElectricMotorcycles] finally i finally got my bike registered, if you make your home built talk with the person in charge at the DMV, don't waste your time with the clerks, i was told five different things before i was done! now that i'm legal i've got another issue, a strange noise, i hope its my top motor sprocket. somehow the bore has gotten bigger and now its very lose on the motor shaft. the bottom motor sprocket is still snug. has anyone else had an issue with the motor sprocket becoming lose? some ideas i have: 1, the top motor could be doing most the the initial work since the wheel sprocket goes to it first? 2, some how the chain is out of alignment? [though i'm not sure about that since both motors are on the same 1/4 alum plate?harryAlbuquerque, NMhttp://www.austinev.org/evalbum/1179http://geocities.com/solarcookingman--- On Sun, 7/27/08, lyle sloan [EMAIL PROTECTED] wrote: From: lyle sloan [EMAIL PROTECTED]Subject: Re: [ElectricMotorcycles] List of Venders?To: ElectricMotorcycles listserv@electricmotorcycles.netDate: Sunday, July 27, 2008, 1:33 PMhttp://www.enertiabike.com/ Under the reserve now, it has a configure and buy page, but wants personal contact information. So cannot confirm shipping,yet. will have to talk to a rep to confirm. --- On Sun, 7/27/08, Mike [EMAIL PROTECTED] wrote: From: Mike [EMAIL PROTECTED] Subject: Re: [ElectricMotorcycles] List of Venders? To: ElectricMotorcycles listserv@electricmotorcycles.net Date: Sunday, July 27, 2008, 1:24 PM Also the Enertia from Brammo http://www.brammo.com/http://www.brammo.com/ Does anyone know if they're actually shipping? I should have stipulated that the list is for companies that are actually shipping. Mike -- The Electric Motorcycle Portal http://www.electricmotorcycles.net/ Electric Motorcycle Listserv http://www.electricmotorcycles.net/listserv _ Stay in touch when you're away with Windows Live Messenger. http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_messenger2_072008
Re: [ElectricMotorcycles] finally
Hello Damon, I had the same issues with sprocket set screws loosening up. I dimpled (recessed with a drill) the motor shaft, used both set screws, and locktite. That solved my problem. I believe that some of the excess noise on my bike is related to the metric chain not lining up on the small american sprocket quite right. I guess what I am aluding to is a believe that a #40 sprocket does not mate well with a 5xx or 4xx chain. What are you using Harry? BTW I had my off the shelf #40(?) sprocket machined at a machine shop (it is hardend steel) to taper in the teeth like the rear. Cost me all of 5 bucks. It is still very noisy and alignment is critical. ? - Mike B. -Original Message- From: damon henry [EMAIL PROTECTED] To: ElectricMotorcycles listserv@electricmotorcycles.net Sent: Thu, 31 Jul 2008 9:29 am Subject: Re: [ElectricMotorcycles] finally My only sprocket loosening issues were when set screws loosened.? It's been a few years since I've had that happen. ? damon Date: Thu, 31 Jul 2008 07:09:07 -0700 From: [EMAIL PROTECTED] To: listserv@electricmotorcycles.net Subject: [ElectricMotorcycles] finally i finally got my bike registered, if you make your home built talk with the person in charge at the DMV, don't waste your time with the clerks, i was told five different things before i was done! ? now that i'm legal i've got another issue, a strange noise, i hope its my top motor sprocket.? somehow the bore has gotten bigger and now its very lose on the motor shaft.??the bottom motor sprocket is still snug.? has anyone else had an issue with the motor sprocket becoming lose? ? some ideas i have: 1, the top motor could be doing most the the initial work since the wheel sprocket goes to it first?? 2, some how the chain is out of alignment? [though i'm not sure about that since both motors are on the same 1/4 alum plate? harry Albuquerque, NM http://www.austinev.org/evalbum/1179 http://geocities.com/solarcookingman --- On Sun, 7/27/08, lyle sloan [EMAIL PROTECTED] wrote: From: lyle sloan [EMAIL PROTECTED] Subject: Re: [ElectricMotorcycles] List of Venders? To: ElectricMotorcycles listserv@electricmotorcycles.net Date: Sunday, July 27, 2008, 1:33 PM http://www.enertiabike.com/ Under the reserve now, it has a configure and buy page, but wants personal contact information. So cannot confirm shipping,yet. will have to talk to a rep to confirm. --- On Sun, 7/27/08, Mike [EMAIL PROTECTED] wrote: From: Mike [EMAIL PROTECTED] Subject: Re: [ElectricMotorcycles] List of Venders? To: ElectricMotorcycles listserv@electricmotorcycles.net Date: Sunday, July 27, 2008, 1:24 PM Also the Enertia from Brammo http://www.brammo.com/http://www.brammo.com/ Does anyone know if they're actually shipping? I should have stipulated that the list is for companies that are actually shipping. Mike -- The Electric Motorcycle Portal http://www.electricmotorcycles.net/ Electric Motorcycle Listserv http://www.electricmotorcycles.net/listserv Stay in touch when you're away with Windows Live Messenger. IM anytime you're online.=
