Re: Implementation of minutes.sty in LyX?

[Liviu Andronic]

On Wed, Jun 15, 2011 at 12:37 AM, Marcus Glöder m.gloe...@gmx.de wrote:
 Dear LyX-users,

 to write minutes of meetings, there is the LaTeX package minutes.sty. Is
 there a way to install a LyX implementation of this package at documents -
 settings - modules?

This was discussed a while back [1], with no solution in sight, I'm
afraid. Someone still needs to hack a layout or module file for the
package.
[1] http://www.mail-archive.com/lyx-users@lists.lyx.org/msg86772.html

Regards
Liviu


 greetings from Germany,
 Marcus

 --
 E-Mail:  m.gloe...@gmx.de




-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: Separating Paragraphs: Indentation vs Vertical Space

[Guenter Milde]

On 2011-06-14, Bruce Pourciau wrote:

...

 This is just what I need. I've saved it as a LyX module. Thank you.  
 How do I get the separation to show up in LyX? I'm assuming the ParSep  
 1 won't make the separation show up, because for this article I have  
 Indentation checked in Text Layout. Should I replace ParSep 1 with  
 something else?

There are additional Keywords for space above and below the paragraph. See
HelpCustomization.

Günter

Re: Implementation of minutes.sty in LyX?

[Dr Eberhard W Lisse]

Marcus,

please advise outcome :-)-O

el

On 6/15/11 12:37 AM, Marcus Glöder wrote:
 Dear LyX-users,
 
 to write minutes of meetings, there is the LaTeX package minutes.sty. Is
 there a way to install a LyX implementation of this package at documents
 - settings - modules?
 
 greetings from Germany,
 Marcus
 

Spell checker in Lyx

[Chdslv]

Hi,

I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell checker
open. Its grayed off and F7 doesn't work.
I have myspell-en-us, Aspell-en, hunspell-en installed too.

I'd appreciate any help on this

Thank you,

Chanath

Re: Spell checker in Lyx

[Julio Rojas]

Follow this thread:
http://comments.gmane.org/gmane.editors.lyx.general/69892

Regards.
-
Julio Rojas
jcredbe...@gmail.com


On Wed, Jun 15, 2011 at 10:45 AM, Chdslv chd...@gmail.com wrote:

 Hi,

 I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell checker
 open. Its grayed off and F7 doesn't work.
 I have myspell-en-us, Aspell-en, hunspell-en installed too.

 I'd appreciate any help on this

 Thank you,

 Chanath

Re: Spell checker in Lyx

[Waluyo Adi Siswanto]

On 15 June 2011 16:45, Chdslv chd...@gmail.com wrote:
 Hi,

 I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell checker
 open. Its grayed off and F7 doesn't work.
 I have myspell-en-us, Aspell-en, hunspell-en installed too.

 I'd appreciate any help on this


As far as I know you need to install libaspell-dev
before you compile from source
You can find from Synaptic Package Manager

Regards
waluyo


 Thank you,

 Chanath

Re: Error with Lyx 2.0 and Sweave

[Franz Jimeno]

Thanks,

changing the numbers to the correct args possition in lyxswave.R solved 
the problem.


Franz

Re: Spell checker in Lyx

[Julio Rojas]

You need to recompile, not install Lyx. I guess that Lyx found in the
repository is compiled without aspell support. This is why you need to
compile it as directed in the link provided.

Regards.
-
Julio Rojas
jcredbe...@gmail.com


On Wed, Jun 15, 2011 at 12:35 PM, Chdslv chd...@gmail.com wrote:

 I have all these installed, but the spell checker is not activated.  I have
 completely uninstalled Lyx 2 and reinstalled using apt-get, but still no
 spell checker


 On Wed, Jun 15, 2011 at 2:54 PM, Julio Rojas jcredbe...@gmail.com wrote:

 Follow this thread:
 http://comments.gmane.org/gmane.editors.lyx.general/69892

 Regards.
 -
 Julio Rojas
 jcredbe...@gmail.com



 On Wed, Jun 15, 2011 at 10:45 AM, Chdslv chd...@gmail.com wrote:

 Hi,

 I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell
 checker open. Its grayed off and F7 doesn't work.
 I have myspell-en-us, Aspell-en, hunspell-en installed too.

 I'd appreciate any help on this

 Thank you,

 Chanath

Re: Separating Paragraphs: Indentation vs Vertical Space

[Bruce Pourciau]

On Jun 15, 2011, at 2:09 AM, Guenter Milde wrote:


On 2011-06-14, Bruce Pourciau wrote:

...


This is just what I need. I've saved it as a LyX module. Thank you.
How do I get the separation to show up in LyX? I'm assuming the  
ParSep

1 won't make the separation show up, because for this article I have
Indentation checked in Text Layout. Should I replace ParSep 1 with
something else?


There are additional Keywords for space above and below the  
paragraph. See

HelpCustomization.

Günter




Thanks, Günter.

Re: Error with Lyx 2.0 and Sweave

[Jean-Marc Lasgouttes]

Le 14/06/2011 01:00, Yihui Xie a écrit :

Hi,

I think the problem came from the explicit argument --args when
running Rscript; it should not be there. You can remove it and try
again.


Indeed, I do not know where this --args comes from. It is definitely not 
in the code distributed with LyX.


JMarc

Re: Error with Lyx 2.0 and Sweave

[Uwe Stöhr]

While you are at it, can anybody please check if our template file for Sweave:
http://www.lyx.org/trac/export/39065/lyx-devel/branches/BRANCH_2_0_X/lib/examples/sweave.lyx
and our Wiki page:
http://wiki.lyx.org/LyX/LyxWithRThroughSweave
are still compilable and up to date?

thanks in advance and regards
Uwe

Re: xetex CV

[Rob Oakes]

Dear Mauro and Liviu,

Sorry for being so quiet through the whole exchange, but I've been buried at 
work for the past month and I'm still trying to get on top of things.

On Jun 14, 2011, at 11:54 PM, Liviu Andronic wrote:

 Hello
 
 On Wed, Jun 15, 2011 at 4:37 AM, Mauro fontana.ma...@gmail.com wrote:
 Hello everyone.
 
 I downloaded LyX a few days ago and then I tried to make a CV. As I surfed
 through the web, I kept finding more and more styles for this so I finally
 decided for one, xetexCV. The thing is that I followed all the steps in this
 website: http://blog.oak-tree.us/index.php/2010/05/19/latex-cv-part4 and used
 the .zip there provided. After that, I tried to make a PDF output of the 
 example
 LyX's file included. Won't compile, the legend No \title given. pops up. I
 
 Yes, I've stumbled upon this myself. Some time ago I reported the
 error to Rob, but then he didn't have a ready-to-ship solution.
 Perhaps he would have more to add now, or maybe not.

Unfortunately, i have not had time to look into the issue yet and come up with 
a non-hackish workaround.  Part of the problem, I think, is that it only 
appears under certain circumstances.

When I downloaded the files and compiled the example document this morning, I 
didn't have any other problems. Could you provide some additional information?

What version of LaTeX are you using? Which operating system?  Are you taking 
out any of the demographic labels (e.g., institution, contact address, phone, 
fax, email, website)?  The more detail you can provide the better I will be 
able to track down the problem and rectify it.

Cheers,

Rob

Re: LyX documentation help needed with noweb

[Jean-Marc Lasgouttes]

On mer. 15 juin 2011 16:38:09 CEST, Uwe Stöhr wrote:

Dear LyXers,

we are updating the LyX manuals, templates and example files for LyX 
2.0.x. In this respect we need your help: Can anybody who uses noweb 
please check if our example files noweb2lyx.lyx, listerrors.lyx and 
Literate.lyx and our Wiki-page:


http://wiki.lyx.org/Tools/Noweb

are still up to date?
If not, can you please update the files and send it to me?
Do we still need all 3 example files or are not 1 or 2 files enough?
For the Wiki-page, please just update it directly.


IMO the noweb support and files needs a lot of love.

JMarc

Re: LyX documentation help needed with noweb

[David Hopkins]

Did the website just go offline? I can't access www.lyx.org or the wiki.

Sincerely,
Dave Hopkins


On Wed, Jun 15, 2011 at 10:38 AM, Uwe Stöhr uwesto...@web.de wrote:
 Dear LyXers,

 we are updating the LyX manuals, templates and example files for LyX 2.0.x.
 In this respect we need your help: Can anybody who uses noweb please check
 if our example files noweb2lyx.lyx, listerrors.lyx and Literate.lyx
 and our Wiki-page:

 http://wiki.lyx.org/Tools/Noweb

 are still up to date?
 If not, can you please update the files and send it to me?
 Do we still need all 3 example files or are not 1 or 2 files enough?
 For the Wiki-page, please just update it directly.

 thanks in advance and regards
 Uwe

Re: Error with Lyx 2.0 and Sweave

[Liviu Andronic]

On Wed, Jun 15, 2011 at 4:25 PM, Uwe Stöhr uwesto...@web.de wrote:
 While you are at it, can anybody please check if our template file for
 Sweave:
 http://www.lyx.org/trac/export/39065/lyx-devel/branches/BRANCH_2_0_X/lib/examples/sweave.lyx

The example shipped with 2.0 compiles just fine here (Xubuntu 10.04,
LyX 2.0.0, TL 2009, R 2.13.0). When I get to it, I'll write some
documentation, too.


 and our Wiki page:
 http://wiki.lyx.org/LyX/LyxWithRThroughSweave
 are still compilable and up to date?

The server seems down so I cannot check the page, but from memory most
of the info in it was obsolete long before 2.0. (I may be wrong, but
each time I tried to read it I skipped most of the material since it
didn't seem to apply to my particular case; my best guess is that it
was valid up until Gregor's layouts.)

Cheers
Liviu


 thanks in advance and regards
 Uwe




-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: LyX documentation help needed with noweb

[Uwe Stöhr]

Am 15.06.2011 17:22, schrieb David Hopkins:


Did the website just go offline? I can't access www.lyx.org or the wiki.


Works for me.

regards Uwe

Re: xetex CV

[Mauro]

Liviu Andronic landronimirc at gmail.com writes:

 
 Hey Rob
 
 On Wed, Jun 15, 2011 at 4:42 PM, Rob Oakes LyX-Devel at oak-tree.us wrote:
  Unfortunately, i have not had time to look into the issue yet and come up
with a non-hackish workaround.
  Part of the problem, I think, is that it only appears under certain
circumstances.
 
  When I downloaded the files and compiled the example document this morning,
I didn't have any other
 problems. Could you provide some additional information?
 
 Sure.
 
  What version of LaTeX are you using? Which operating system?  Are you taking
out any of the demographic
 labels (e.g., institution, contact address, phone, fax, email, website)?  The
more detail you can
 provide the better I will be able to track down the problem and rectify it.
 
 I'm running Xubuntu 10.04 Lucid, x64, LyX 2.0.0, TeXLive 2009,
 xetexCV-LyX.zip as downloaded from your site. The only change I made
 was to change Minion Pro, which I don't have installed, to
 Liberation/Biolinum. When I try to compile example4-xetex4-LyX.lyx I
 get the 'no \title given' error (see first log file).
 
 If I delete all \maketitle generating fields, from \cvname to
 \website, inclusive, the file compiles just fine (see attached). If
 I'm leaving at least one \maketitle generating field, the file doesn't
 compile.
 
 As far as I know, my LaTeX installation is probably is as stock as one
 would get on Ubuntu (Lucid). Please let me know if I can provide more
 info. Cheers
 Liviu
 
  Cheers,
 
  Rob
 


Thank you both, Liviu and Rob

I'm using Windows 7 Ultimate 64-bit edition.

Installed LyX 2.0.0 following the steps in the wizard. That means that I
installed MikTex 2.9 and all the packages I was asked to.

I just came up with the idea that maybe, as it couldn't find the image that is
specified in cvimage { } at the document settings area, setting the pic in the
right way might help, but no, apparently the title action isn't related to the
image.

I'm compiling just like I downloaded it, only loaded the BibTEX (after the first
few crashes) and now, loaded the cvimage provided in the .zip. Im using PDF
(XeTeX Output). If you want, I can try copying the source code to the editor
provided by MikTeX and see the error log there, as you wish.

I don't know what others detail can I say. If you tell me what you need, I'll
reply, no problem, but I have no idea which are important.

-

BTW: When I complete the cvimage { } field in the document settings, the \
used in Windows to separate folders, appear in blue. I think that's because
LaTeX recognises that symbol as the prelude of a command. Any work arround for
that? Or works just fine this way even with the slashes appearing in blue?
Last question related to this: Is there anyway to have spaces in the image name?
I mean, can I set an image with a name like This Is A Test (with the blanks).


Thanks a lot.

Mauro

Re: Adding a logo to beamer presentation

[Paul Rubin]

Liviu Andronic landronimirc at gmail.com writes:


 Each Beamer theme is a collection of LaTeX commands, meaning that
 instead of using a given theme you could compile several commands
 (from different themes) that would give you the look you desire. I'd
 start with Beamer's documentation.

I've customized a few themes (Warsaw, Madrid, Marburg) to add my college's logo.
 What I did was copy the relevant theme files to a folder in my localtexmf tree,
renamed them (so that they did not collide with the originals), and hacked them.
 Hacking an existing theme is probably faster than cobbling together a new one,
assuming you're happy with most of what the existing theme does.

Paul

Upgrading to LyX-2.0 and MacTeX-2010 broke moderncv

[courosh]

After upgrading to LyX-2.0 and MacTeX-2010, compiling a moderncv document
causes two error messages (from log):
-
! Undefined control sequence.
\hyper@linkurl ...tionraw }\relax \Hy@colorlink 
  \@urlcolor
#1\Hy@xspace@en...
l.66 \begin{document}
 
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\close@pdflink -\Hy@endcolorlink 
  \Hy@VerboseLinkStop \pdfendlink 
l.66 \begin{document}
 
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
-
Here's the preamble:
-
\documentclass[12pt,english]{moderncv}
\usepackage[T1]{fontenc}
\usepackage[latin9]{inputenc}
\setcounter{secnumdepth}{2}
\setcounter{tocdepth}{2}
\setlength{\parskip}{\smallskipamount}
\setlength{\parindent}{0pt}
\usepackage{color}
\usepackage{babel}
\usepackage{textcomp}
\usepackage{setspace}
\ifx\hypersetup\undefined
  \AtBeginDocument{%
\hypersetup{unicode=true,pdfusetitle,
 bookmarks=true,bookmarksnumbered=false,bookmarksopen=false,
 breaklinks=false,pdfborder={0 0 1},backref=false,colorlinks=false}
  }
\else
  \hypersetup{unicode=true,pdfusetitle,
 bookmarks=true,bookmarksnumbered=false,bookmarksopen=false,
 breaklinks=false,pdfborder={0 0 1},backref=false,colorlinks=false}
\fi

\makeatletter
%% User specified LaTeX commands.
\moderncvtheme[blue]{classic}
% possible themes are classic and casual
% optional argument are 'blue' (default), 'orange', 'red', 'green', 'grey'
and 'roman' (for roman fonts, instead of sans serif fonts)

% required
\firstname{*}
% required
\familyname{*}

% optional, remove the line if not wanted
\title{Curriculum Vitae}

% optional
% \address{street and number}{postcode city}
% '\\' adds a line break
\address{*}{*}

% optional
\phone{*}

% optional
\mobile{*}

% optional
\email{*}

% optional
% \photo[height]{name}
% 'height' is the height the picture is resized to
% 'name' is the name of the picture file

\AtBeginDocument{\maketitle}

\makeatother

\begin{document}
...
-
Any ideas how to fix this?

--
View this message in context: 
http://lyx.475766.n2.nabble.com/Upgrading-to-LyX-2-0-and-MacTeX-2010-broke-moderncv-tp6481546p6481546.html
Sent from the LyX - Users mailing list archive at Nabble.com.

Re: Upgrading to LyX-2.0 and MacTeX-2010 broke moderncv

[Uwe Stöhr]

Am 16.06.2011 04:46, schrieb courosh:


After upgrading to LyX-2.0 and MacTeX-2010, compiling a moderncv document
causes two error messages (from log):


It compiles without problems for me (using MiKTeX 2.9 under Windows). So perhaps your MacTeX-2010 
installation is misconfigured are some packages are missing. Is hypperef installed in your MacTeX-2010?


Does it compile if you are using TeXLive instead of MacTeX?

regards Uwe

Re: Adding a logo to beamer presentation

[Graham Smith]

Paul


  Each Beamer theme is a collection of LaTeX commands, meaning that
  instead of using a given theme you could compile several commands
  (from different themes) that would give you the look you desire. I'd
  start with Beamer's documentation.

 I've customized a few themes (Warsaw, Madrid, Marburg) to add my college's
 logo.
  What I did was copy the relevant theme files to a folder in my localtexmf
 tree,
 renamed them (so that they did not collide with the originals), and hacked
 them.
  Hacking an existing theme is probably faster than cobbling together a new
 one,
 assuming you're happy with most of what the existing theme does.


I may well try that some time, but for now I will have to compromise.

Thanks,

Graham

Common footnote

[Mark Livingstone]

Hello,

I am using article KOMA-Script. I have a number of unnumbered subsection
headers. For some of them, I want to have a common footnote (ie say five
footnotes that all have a 1 superscript and one footnote entry with the
common footnote text in the footer.)

If this is not possible, can a similar effect be achieved?

Thanks in advance,

MarkL

Re: Implementation of minutes.sty in LyX?

[Liviu Andronic]

On Wed, Jun 15, 2011 at 12:37 AM, Marcus Glöder m.gloe...@gmx.de wrote:
 Dear LyX-users,

 to write minutes of meetings, there is the LaTeX package minutes.sty. Is
 there a way to install a LyX implementation of this package at documents -
 settings - modules?

This was discussed a while back [1], with no solution in sight, I'm
afraid. Someone still needs to hack a layout or module file for the
package.
[1] http://www.mail-archive.com/lyx-users@lists.lyx.org/msg86772.html

Regards
Liviu


 greetings from Germany,
 Marcus

 --
 E-Mail:  m.gloe...@gmx.de




-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: Separating Paragraphs: Indentation vs Vertical Space

[Guenter Milde]

On 2011-06-14, Bruce Pourciau wrote:

...

 This is just what I need. I've saved it as a LyX module. Thank you.  
 How do I get the separation to show up in LyX? I'm assuming the ParSep  
 1 won't make the separation show up, because for this article I have  
 Indentation checked in Text Layout. Should I replace ParSep 1 with  
 something else?

There are additional Keywords for space above and below the paragraph. See
HelpCustomization.

Günter

Re: Implementation of minutes.sty in LyX?

[Dr Eberhard W Lisse]

Marcus,

please advise outcome :-)-O

el

On 6/15/11 12:37 AM, Marcus Glöder wrote:
 Dear LyX-users,
 
 to write minutes of meetings, there is the LaTeX package minutes.sty. Is
 there a way to install a LyX implementation of this package at documents
 - settings - modules?
 
 greetings from Germany,
 Marcus
 

Spell checker in Lyx

[Chdslv]

Hi,

I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell checker
open. Its grayed off and F7 doesn't work.
I have myspell-en-us, Aspell-en, hunspell-en installed too.

I'd appreciate any help on this

Thank you,

Chanath

Re: Spell checker in Lyx

[Julio Rojas]

Follow this thread:
http://comments.gmane.org/gmane.editors.lyx.general/69892

Regards.
-
Julio Rojas
jcredbe...@gmail.com


On Wed, Jun 15, 2011 at 10:45 AM, Chdslv chd...@gmail.com wrote:

 Hi,

 I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell checker
 open. Its grayed off and F7 doesn't work.
 I have myspell-en-us, Aspell-en, hunspell-en installed too.

 I'd appreciate any help on this

 Thank you,

 Chanath

Re: Spell checker in Lyx

[Waluyo Adi Siswanto]

On 15 June 2011 16:45, Chdslv chd...@gmail.com wrote:
 Hi,

 I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell checker
 open. Its grayed off and F7 doesn't work.
 I have myspell-en-us, Aspell-en, hunspell-en installed too.

 I'd appreciate any help on this


As far as I know you need to install libaspell-dev
before you compile from source
You can find from Synaptic Package Manager

Regards
waluyo


 Thank you,

 Chanath

Re: Error with Lyx 2.0 and Sweave

[Franz Jimeno]

Thanks,

changing the numbers to the correct args possition in lyxswave.R solved 
the problem.


Franz

Re: Spell checker in Lyx

[Julio Rojas]

You need to recompile, not install Lyx. I guess that Lyx found in the
repository is compiled without aspell support. This is why you need to
compile it as directed in the link provided.

Regards.
-
Julio Rojas
jcredbe...@gmail.com


On Wed, Jun 15, 2011 at 12:35 PM, Chdslv chd...@gmail.com wrote:

 I have all these installed, but the spell checker is not activated.  I have
 completely uninstalled Lyx 2 and reinstalled using apt-get, but still no
 spell checker


 On Wed, Jun 15, 2011 at 2:54 PM, Julio Rojas jcredbe...@gmail.com wrote:

 Follow this thread:
 http://comments.gmane.org/gmane.editors.lyx.general/69892

 Regards.
 -
 Julio Rojas
 jcredbe...@gmail.com



 On Wed, Jun 15, 2011 at 10:45 AM, Chdslv chd...@gmail.com wrote:

 Hi,

 I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell
 checker open. Its grayed off and F7 doesn't work.
 I have myspell-en-us, Aspell-en, hunspell-en installed too.

 I'd appreciate any help on this

 Thank you,

 Chanath

Re: Separating Paragraphs: Indentation vs Vertical Space

[Bruce Pourciau]

On Jun 15, 2011, at 2:09 AM, Guenter Milde wrote:


On 2011-06-14, Bruce Pourciau wrote:

...


This is just what I need. I've saved it as a LyX module. Thank you.
How do I get the separation to show up in LyX? I'm assuming the  
ParSep

1 won't make the separation show up, because for this article I have
Indentation checked in Text Layout. Should I replace ParSep 1 with
something else?


There are additional Keywords for space above and below the  
paragraph. See

HelpCustomization.

Günter




Thanks, Günter.

Re: Error with Lyx 2.0 and Sweave

[Jean-Marc Lasgouttes]

Le 14/06/2011 01:00, Yihui Xie a écrit :

Hi,

I think the problem came from the explicit argument --args when
running Rscript; it should not be there. You can remove it and try
again.


Indeed, I do not know where this --args comes from. It is definitely not 
in the code distributed with LyX.


JMarc

Re: Error with Lyx 2.0 and Sweave

[Uwe Stöhr]

While you are at it, can anybody please check if our template file for Sweave:
http://www.lyx.org/trac/export/39065/lyx-devel/branches/BRANCH_2_0_X/lib/examples/sweave.lyx
and our Wiki page:
http://wiki.lyx.org/LyX/LyxWithRThroughSweave
are still compilable and up to date?

thanks in advance and regards
Uwe

Re: xetex CV

[Rob Oakes]

Dear Mauro and Liviu,

Sorry for being so quiet through the whole exchange, but I've been buried at 
work for the past month and I'm still trying to get on top of things.

On Jun 14, 2011, at 11:54 PM, Liviu Andronic wrote:

 Hello
 
 On Wed, Jun 15, 2011 at 4:37 AM, Mauro fontana.ma...@gmail.com wrote:
 Hello everyone.
 
 I downloaded LyX a few days ago and then I tried to make a CV. As I surfed
 through the web, I kept finding more and more styles for this so I finally
 decided for one, xetexCV. The thing is that I followed all the steps in this
 website: http://blog.oak-tree.us/index.php/2010/05/19/latex-cv-part4 and used
 the .zip there provided. After that, I tried to make a PDF output of the 
 example
 LyX's file included. Won't compile, the legend No \title given. pops up. I
 
 Yes, I've stumbled upon this myself. Some time ago I reported the
 error to Rob, but then he didn't have a ready-to-ship solution.
 Perhaps he would have more to add now, or maybe not.

Unfortunately, i have not had time to look into the issue yet and come up with 
a non-hackish workaround.  Part of the problem, I think, is that it only 
appears under certain circumstances.

When I downloaded the files and compiled the example document this morning, I 
didn't have any other problems. Could you provide some additional information?

What version of LaTeX are you using? Which operating system?  Are you taking 
out any of the demographic labels (e.g., institution, contact address, phone, 
fax, email, website)?  The more detail you can provide the better I will be 
able to track down the problem and rectify it.

Cheers,

Rob

Re: LyX documentation help needed with noweb

[Jean-Marc Lasgouttes]

On mer. 15 juin 2011 16:38:09 CEST, Uwe Stöhr wrote:

Dear LyXers,

we are updating the LyX manuals, templates and example files for LyX 
2.0.x. In this respect we need your help: Can anybody who uses noweb 
please check if our example files noweb2lyx.lyx, listerrors.lyx and 
Literate.lyx and our Wiki-page:


http://wiki.lyx.org/Tools/Noweb

are still up to date?
If not, can you please update the files and send it to me?
Do we still need all 3 example files or are not 1 or 2 files enough?
For the Wiki-page, please just update it directly.


IMO the noweb support and files needs a lot of love.

JMarc

Re: LyX documentation help needed with noweb

[David Hopkins]

Did the website just go offline? I can't access www.lyx.org or the wiki.

Sincerely,
Dave Hopkins


On Wed, Jun 15, 2011 at 10:38 AM, Uwe Stöhr uwesto...@web.de wrote:
 Dear LyXers,

 we are updating the LyX manuals, templates and example files for LyX 2.0.x.
 In this respect we need your help: Can anybody who uses noweb please check
 if our example files noweb2lyx.lyx, listerrors.lyx and Literate.lyx
 and our Wiki-page:

 http://wiki.lyx.org/Tools/Noweb

 are still up to date?
 If not, can you please update the files and send it to me?
 Do we still need all 3 example files or are not 1 or 2 files enough?
 For the Wiki-page, please just update it directly.

 thanks in advance and regards
 Uwe

Re: Error with Lyx 2.0 and Sweave

[Liviu Andronic]

On Wed, Jun 15, 2011 at 4:25 PM, Uwe Stöhr uwesto...@web.de wrote:
 While you are at it, can anybody please check if our template file for
 Sweave:
 http://www.lyx.org/trac/export/39065/lyx-devel/branches/BRANCH_2_0_X/lib/examples/sweave.lyx

The example shipped with 2.0 compiles just fine here (Xubuntu 10.04,
LyX 2.0.0, TL 2009, R 2.13.0). When I get to it, I'll write some
documentation, too.


 and our Wiki page:
 http://wiki.lyx.org/LyX/LyxWithRThroughSweave
 are still compilable and up to date?

The server seems down so I cannot check the page, but from memory most
of the info in it was obsolete long before 2.0. (I may be wrong, but
each time I tried to read it I skipped most of the material since it
didn't seem to apply to my particular case; my best guess is that it
was valid up until Gregor's layouts.)

Cheers
Liviu


 thanks in advance and regards
 Uwe




-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: LyX documentation help needed with noweb

[Uwe Stöhr]

Am 15.06.2011 17:22, schrieb David Hopkins:


Did the website just go offline? I can't access www.lyx.org or the wiki.


Works for me.

regards Uwe

Re: xetex CV

[Mauro]

Liviu Andronic landronimirc at gmail.com writes:

 
 Hey Rob
 
 On Wed, Jun 15, 2011 at 4:42 PM, Rob Oakes LyX-Devel at oak-tree.us wrote:
  Unfortunately, i have not had time to look into the issue yet and come up
with a non-hackish workaround.
  Part of the problem, I think, is that it only appears under certain
circumstances.
 
  When I downloaded the files and compiled the example document this morning,
I didn't have any other
 problems. Could you provide some additional information?
 
 Sure.
 
  What version of LaTeX are you using? Which operating system?  Are you taking
out any of the demographic
 labels (e.g., institution, contact address, phone, fax, email, website)?  The
more detail you can
 provide the better I will be able to track down the problem and rectify it.
 
 I'm running Xubuntu 10.04 Lucid, x64, LyX 2.0.0, TeXLive 2009,
 xetexCV-LyX.zip as downloaded from your site. The only change I made
 was to change Minion Pro, which I don't have installed, to
 Liberation/Biolinum. When I try to compile example4-xetex4-LyX.lyx I
 get the 'no \title given' error (see first log file).
 
 If I delete all \maketitle generating fields, from \cvname to
 \website, inclusive, the file compiles just fine (see attached). If
 I'm leaving at least one \maketitle generating field, the file doesn't
 compile.
 
 As far as I know, my LaTeX installation is probably is as stock as one
 would get on Ubuntu (Lucid). Please let me know if I can provide more
 info. Cheers
 Liviu
 
  Cheers,
 
  Rob
 


Thank you both, Liviu and Rob

I'm using Windows 7 Ultimate 64-bit edition.

Installed LyX 2.0.0 following the steps in the wizard. That means that I
installed MikTex 2.9 and all the packages I was asked to.

I just came up with the idea that maybe, as it couldn't find the image that is
specified in cvimage { } at the document settings area, setting the pic in the
right way might help, but no, apparently the title action isn't related to the
image.

I'm compiling just like I downloaded it, only loaded the BibTEX (after the first
few crashes) and now, loaded the cvimage provided in the .zip. Im using PDF
(XeTeX Output). If you want, I can try copying the source code to the editor
provided by MikTeX and see the error log there, as you wish.

I don't know what others detail can I say. If you tell me what you need, I'll
reply, no problem, but I have no idea which are important.

-

BTW: When I complete the cvimage { } field in the document settings, the \
used in Windows to separate folders, appear in blue. I think that's because
LaTeX recognises that symbol as the prelude of a command. Any work arround for
that? Or works just fine this way even with the slashes appearing in blue?
Last question related to this: Is there anyway to have spaces in the image name?
I mean, can I set an image with a name like This Is A Test (with the blanks).


Thanks a lot.

Mauro

Re: Adding a logo to beamer presentation

[Paul Rubin]

Liviu Andronic landronimirc at gmail.com writes:


 Each Beamer theme is a collection of LaTeX commands, meaning that
 instead of using a given theme you could compile several commands
 (from different themes) that would give you the look you desire. I'd
 start with Beamer's documentation.

I've customized a few themes (Warsaw, Madrid, Marburg) to add my college's logo.
 What I did was copy the relevant theme files to a folder in my localtexmf tree,
renamed them (so that they did not collide with the originals), and hacked them.
 Hacking an existing theme is probably faster than cobbling together a new one,
assuming you're happy with most of what the existing theme does.

Paul

Upgrading to LyX-2.0 and MacTeX-2010 broke moderncv

[courosh]

After upgrading to LyX-2.0 and MacTeX-2010, compiling a moderncv document
causes two error messages (from log):
-
! Undefined control sequence.
\hyper@linkurl ...tionraw }\relax \Hy@colorlink 
  \@urlcolor
#1\Hy@xspace@en...
l.66 \begin{document}
 
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\close@pdflink -\Hy@endcolorlink 
  \Hy@VerboseLinkStop \pdfendlink 
l.66 \begin{document}
 
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
-
Here's the preamble:
-
\documentclass[12pt,english]{moderncv}
\usepackage[T1]{fontenc}
\usepackage[latin9]{inputenc}
\setcounter{secnumdepth}{2}
\setcounter{tocdepth}{2}
\setlength{\parskip}{\smallskipamount}
\setlength{\parindent}{0pt}
\usepackage{color}
\usepackage{babel}
\usepackage{textcomp}
\usepackage{setspace}
\ifx\hypersetup\undefined
  \AtBeginDocument{%
\hypersetup{unicode=true,pdfusetitle,
 bookmarks=true,bookmarksnumbered=false,bookmarksopen=false,
 breaklinks=false,pdfborder={0 0 1},backref=false,colorlinks=false}
  }
\else
  \hypersetup{unicode=true,pdfusetitle,
 bookmarks=true,bookmarksnumbered=false,bookmarksopen=false,
 breaklinks=false,pdfborder={0 0 1},backref=false,colorlinks=false}
\fi

\makeatletter
%% User specified LaTeX commands.
\moderncvtheme[blue]{classic}
% possible themes are classic and casual
% optional argument are 'blue' (default), 'orange', 'red', 'green', 'grey'
and 'roman' (for roman fonts, instead of sans serif fonts)

% required
\firstname{*}
% required
\familyname{*}

% optional, remove the line if not wanted
\title{Curriculum Vitae}

% optional
% \address{street and number}{postcode city}
% '\\' adds a line break
\address{*}{*}

% optional
\phone{*}

% optional
\mobile{*}

% optional
\email{*}

% optional
% \photo[height]{name}
% 'height' is the height the picture is resized to
% 'name' is the name of the picture file

\AtBeginDocument{\maketitle}

\makeatother

\begin{document}
...
-
Any ideas how to fix this?

--
View this message in context: 
http://lyx.475766.n2.nabble.com/Upgrading-to-LyX-2-0-and-MacTeX-2010-broke-moderncv-tp6481546p6481546.html
Sent from the LyX - Users mailing list archive at Nabble.com.

Re: Upgrading to LyX-2.0 and MacTeX-2010 broke moderncv

[Uwe Stöhr]

Am 16.06.2011 04:46, schrieb courosh:


After upgrading to LyX-2.0 and MacTeX-2010, compiling a moderncv document
causes two error messages (from log):


It compiles without problems for me (using MiKTeX 2.9 under Windows). So perhaps your MacTeX-2010 
installation is misconfigured are some packages are missing. Is hypperef installed in your MacTeX-2010?


Does it compile if you are using TeXLive instead of MacTeX?

regards Uwe

Re: Adding a logo to beamer presentation

[Graham Smith]

Paul


  Each Beamer theme is a collection of LaTeX commands, meaning that
  instead of using a given theme you could compile several commands
  (from different themes) that would give you the look you desire. I'd
  start with Beamer's documentation.

 I've customized a few themes (Warsaw, Madrid, Marburg) to add my college's
 logo.
  What I did was copy the relevant theme files to a folder in my localtexmf
 tree,
 renamed them (so that they did not collide with the originals), and hacked
 them.
  Hacking an existing theme is probably faster than cobbling together a new
 one,
 assuming you're happy with most of what the existing theme does.


I may well try that some time, but for now I will have to compromise.

Thanks,

Graham

Common footnote

[Mark Livingstone]

Hello,

I am using article KOMA-Script. I have a number of unnumbered subsection
headers. For some of them, I want to have a common footnote (ie say five
footnotes that all have a 1 superscript and one footnote entry with the
common footnote text in the footer.)

If this is not possible, can a similar effect be achieved?

Thanks in advance,

MarkL

Re: Implementation of minutes.sty in LyX?

[Liviu Andronic]

On Wed, Jun 15, 2011 at 12:37 AM, Marcus Glöder  wrote:
> Dear LyX-users,
>
> to write minutes of meetings, there is the LaTeX package minutes.sty. Is
> there a way to install a LyX implementation of this package at documents ->
> settings -> modules?
>
This was discussed a while back [1], with no solution in sight, I'm
afraid. Someone still needs to hack a layout or module file for the
package.
[1] http://www.mail-archive.com/lyx-users@lists.lyx.org/msg86772.html

Regards
Liviu


> greetings from Germany,
> Marcus
>
> --
> E-Mail:  m.gloe...@gmx.de
>



-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: Separating Paragraphs: Indentation vs Vertical Space

[Guenter Milde]

On 2011-06-14, Bruce Pourciau wrote:

...

> This is just what I need. I've saved it as a LyX module. Thank you.  
> How do I get the separation to show up in LyX? I'm assuming the ParSep  
> 1 won't make the separation show up, because for this article I have  
> Indentation checked in Text Layout. Should I replace ParSep 1 with  
> something else?

There are additional Keywords for space above and below the paragraph. See
Help>Customization.

Günter

Re: Implementation of minutes.sty in LyX?

[Dr Eberhard W Lisse]

Marcus,

please advise outcome :-)-O

el

On 6/15/11 12:37 AM, Marcus Glöder wrote:
> Dear LyX-users,
> 
> to write minutes of meetings, there is the LaTeX package minutes.sty. Is
> there a way to install a LyX implementation of this package at documents
> -> settings -> modules?
> 
> greetings from Germany,
> Marcus
> 

Spell checker in Lyx

[Chdslv]

Hi,

I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell checker
open. Its grayed off and F7 doesn't work.
I have myspell-en-us, Aspell-en, hunspell-en installed too.

I'd appreciate any help on this

Thank you,

Chanath

Re: Spell checker in Lyx

[Julio Rojas]

Follow this thread:
http://comments.gmane.org/gmane.editors.lyx.general/69892

Regards.
-
Julio Rojas
jcredbe...@gmail.com


On Wed, Jun 15, 2011 at 10:45 AM, Chdslv  wrote:

> Hi,
>
> I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell checker
> open. Its grayed off and F7 doesn't work.
> I have myspell-en-us, Aspell-en, hunspell-en installed too.
>
> I'd appreciate any help on this
>
> Thank you,
>
> Chanath
>

Re: Spell checker in Lyx

[Waluyo Adi Siswanto]

On 15 June 2011 16:45, Chdslv  wrote:
> Hi,
>
> I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell checker
> open. Its grayed off and F7 doesn't work.
> I have myspell-en-us, Aspell-en, hunspell-en installed too.
>
> I'd appreciate any help on this
>

As far as I know you need to install libaspell-dev
before you compile from source
You can find from Synaptic Package Manager

Regards
waluyo


> Thank you,
>
> Chanath
>

Re: Error with Lyx 2.0 and Sweave

[Franz Jimeno]

Thanks,

changing the numbers to the correct args possition in lyxswave.R solved 
the problem.


Franz

Re: Spell checker in Lyx

[Julio Rojas]

You need to recompile, not install Lyx. I guess that Lyx found in the
repository is compiled without aspell support. This is why you need to
compile it as directed in the link provided.

Regards.
-
Julio Rojas
jcredbe...@gmail.com


On Wed, Jun 15, 2011 at 12:35 PM, Chdslv  wrote:

> I have all these installed, but the spell checker is not activated.  I have
> completely uninstalled Lyx 2 and reinstalled using apt-get, but still no
> spell checker
>
>
> On Wed, Jun 15, 2011 at 2:54 PM, Julio Rojas  wrote:
>
>> Follow this thread:
>> http://comments.gmane.org/gmane.editors.lyx.general/69892
>>
>> Regards.
>> -
>> Julio Rojas
>> jcredbe...@gmail.com
>>
>>
>>
>> On Wed, Jun 15, 2011 at 10:45 AM, Chdslv  wrote:
>>
>>> Hi,
>>>
>>> I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell
>>> checker open. Its grayed off and F7 doesn't work.
>>> I have myspell-en-us, Aspell-en, hunspell-en installed too.
>>>
>>> I'd appreciate any help on this
>>>
>>> Thank you,
>>>
>>> Chanath
>>>
>>
>>
>

Re: Separating Paragraphs: Indentation vs Vertical Space

[Bruce Pourciau]

On Jun 15, 2011, at 2:09 AM, Guenter Milde wrote:


On 2011-06-14, Bruce Pourciau wrote:

...


This is just what I need. I've saved it as a LyX module. Thank you.
How do I get the separation to show up in LyX? I'm assuming the  
ParSep

1 won't make the separation show up, because for this article I have
Indentation checked in Text Layout. Should I replace ParSep 1 with
something else?


There are additional Keywords for space above and below the  
paragraph. See

Help>Customization.

Günter




Thanks, Günter.

Re: Error with Lyx 2.0 and Sweave

[Jean-Marc Lasgouttes]

Le 14/06/2011 01:00, Yihui Xie a écrit :

Hi,

I think the problem came from the explicit argument "--args" when
running Rscript; it should not be there. You can remove it and try
again.


Indeed, I do not know where this --args comes from. It is definitely not 
in the code distributed with LyX.


JMarc

Re: Error with Lyx 2.0 and Sweave

[Uwe Stöhr]

While you are at it, can anybody please check if our template file for Sweave:
http://www.lyx.org/trac/export/39065/lyx-devel/branches/BRANCH_2_0_X/lib/examples/sweave.lyx
and our Wiki page:
http://wiki.lyx.org/LyX/LyxWithRThroughSweave
are still compilable and up to date?

thanks in advance and regards
Uwe

Re: xetex CV

[Rob Oakes]

Dear Mauro and Liviu,

Sorry for being so quiet through the whole exchange, but I've been buried at 
work for the past month and I'm still trying to get on top of things.

On Jun 14, 2011, at 11:54 PM, Liviu Andronic wrote:

> Hello
> 
> On Wed, Jun 15, 2011 at 4:37 AM, Mauro  wrote:
>> Hello everyone.
>> 
>> I downloaded LyX a few days ago and then I tried to make a CV. As I surfed
>> through the web, I kept finding more and more styles for this so I finally
>> decided for one, xetexCV. The thing is that I followed all the steps in this
>> website: http://blog.oak-tree.us/index.php/2010/05/19/latex-cv-part4 and used
>> the .zip there provided. After that, I tried to make a PDF output of the 
>> example
>> LyX's file included. Won't compile, the legend "No \title given." pops up. I
>> 
> Yes, I've stumbled upon this myself. Some time ago I reported the
> error to Rob, but then he didn't have a ready-to-ship solution.
> Perhaps he would have more to add now, or maybe not.

Unfortunately, i have not had time to look into the issue yet and come up with 
a non-hackish workaround.  Part of the problem, I think, is that it only 
appears under certain circumstances.

When I downloaded the files and compiled the example document this morning, I 
didn't have any other problems. Could you provide some additional information?

What version of LaTeX are you using? Which operating system?  Are you taking 
out any of the demographic labels (e.g., institution, contact address, phone, 
fax, email, website)?  The more detail you can provide the better I will be 
able to track down the problem and rectify it.

Cheers,

Rob

Re: LyX documentation help needed with noweb

[Jean-Marc Lasgouttes]

On mer. 15 juin 2011 16:38:09 CEST, Uwe Stöhr wrote:

Dear LyXers,

we are updating the LyX manuals, templates and example files for LyX 
2.0.x. In this respect we need your help: Can anybody who uses noweb 
please check if our example files "noweb2lyx.lyx", "listerrors.lyx" and 
"Literate.lyx" and our Wiki-page:


http://wiki.lyx.org/Tools/Noweb

are still up to date?
If not, can you please update the files and send it to me?
Do we still need all 3 example files or are not 1 or 2 files enough?
For the Wiki-page, please just update it directly.


IMO the noweb support and files needs a lot of love.

JMarc

Re: LyX documentation help needed with noweb

[David Hopkins]

Did the website just go offline? I can't access www.lyx.org or the wiki.

Sincerely,
Dave Hopkins


On Wed, Jun 15, 2011 at 10:38 AM, Uwe Stöhr  wrote:
> Dear LyXers,
>
> we are updating the LyX manuals, templates and example files for LyX 2.0.x.
> In this respect we need your help: Can anybody who uses noweb please check
> if our example files "noweb2lyx.lyx", "listerrors.lyx" and "Literate.lyx"
> and our Wiki-page:
>
> http://wiki.lyx.org/Tools/Noweb
>
> are still up to date?
> If not, can you please update the files and send it to me?
> Do we still need all 3 example files or are not 1 or 2 files enough?
> For the Wiki-page, please just update it directly.
>
> thanks in advance and regards
> Uwe
>

Re: Error with Lyx 2.0 and Sweave

[Liviu Andronic]

On Wed, Jun 15, 2011 at 4:25 PM, Uwe Stöhr  wrote:
> While you are at it, can anybody please check if our template file for
> Sweave:
> http://www.lyx.org/trac/export/39065/lyx-devel/branches/BRANCH_2_0_X/lib/examples/sweave.lyx
>
The example shipped with 2.0 compiles just fine here (Xubuntu 10.04,
LyX 2.0.0, TL 2009, R 2.13.0). When I get to it, I'll write some
documentation, too.


> and our Wiki page:
> http://wiki.lyx.org/LyX/LyxWithRThroughSweave
> are still compilable and up to date?
>
The server seems down so I cannot check the page, but from memory most
of the info in it was obsolete long before 2.0. (I may be wrong, but
each time I tried to read it I skipped most of the material since it
didn't seem to apply to my particular case; my best guess is that it
was valid up until Gregor's layouts.)

Cheers
Liviu


> thanks in advance and regards
> Uwe
>



-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: LyX documentation help needed with noweb

[Uwe Stöhr]

Am 15.06.2011 17:22, schrieb David Hopkins:


Did the website just go offline? I can't access www.lyx.org or the wiki.


Works for me.

regards Uwe

Re: xetex CV

[Mauro]

Liviu Andronic  gmail.com> writes:

> 
> Hey Rob
> 
> On Wed, Jun 15, 2011 at 4:42 PM, Rob Oakes  oak-tree.us> wrote:
> > Unfortunately, i have not had time to look into the issue yet and come up
with a non-hackish workaround.
>  Part of the problem, I think, is that it only appears under certain
circumstances.
> >
> > When I downloaded the files and compiled the example document this morning,
I didn't have any other
> problems. Could you provide some additional information?
> >
> Sure.
> 
> > What version of LaTeX are you using? Which operating system?  Are you taking
out any of the demographic
> labels (e.g., institution, contact address, phone, fax, email, website)?  The
more detail you can
> provide the better I will be able to track down the problem and rectify it.
> >
> I'm running Xubuntu 10.04 Lucid, x64, LyX 2.0.0, TeXLive 2009,
> xetexCV-LyX.zip as downloaded from your site. The only change I made
> was to change Minion Pro, which I don't have installed, to
> Liberation/Biolinum. When I try to compile example4-xetex4-LyX.lyx I
> get the 'no \title given' error (see first log file).
> 
> If I delete all \maketitle generating fields, from \cvname to
> \website, inclusive, the file compiles just fine (see attached). If
> I'm leaving at least one \maketitle generating field, the file doesn't
> compile.
> 
> As far as I know, my LaTeX installation is probably is as stock as one
> would get on Ubuntu (Lucid). Please let me know if I can provide more
> info. Cheers
> Liviu
> 
> > Cheers,
> >
> > Rob
> 


Thank you both, Liviu and Rob

I'm using Windows 7 Ultimate 64-bit edition.

Installed LyX 2.0.0 following the steps in the wizard. That means that I
installed MikTex 2.9 and all the packages I was asked to.

I just came up with the idea that maybe, as it couldn't find the image that is
specified in cvimage { } at the document settings area, setting the pic in the
right way might help, but no, apparently the title action isn't related to the
image.

I'm compiling just like I downloaded it, only loaded the BibTEX (after the first
few crashes) and now, loaded the cvimage provided in the .zip. Im using PDF
(XeTeX Output). If you want, I can try copying the source code to the editor
provided by MikTeX and see the error log there, as you wish.

I don't know what others detail can I say. If you tell me what you need, I'll
reply, no problem, but I have no idea which are important.

-

BTW: When I complete the cvimage { } field in the document settings, the "\"
used in Windows to separate folders, appear in blue. I think that's because
LaTeX recognises that symbol as the prelude of a command. Any work arround for
that? Or works just fine this way even with the slashes appearing in blue?
Last question related to this: Is there anyway to have spaces in the image name?
I mean, can I set an image with a name like "This Is A Test" (with the blanks).


Thanks a lot.

Mauro

Re: Adding a logo to beamer presentation

[Paul Rubin]

Liviu Andronic  gmail.com> writes:


> Each Beamer theme is a collection of LaTeX commands, meaning that
> instead of using a given theme you could compile several commands
> (from different themes) that would give you the look you desire. I'd
> start with Beamer's documentation.

I've customized a few themes (Warsaw, Madrid, Marburg) to add my college's logo.
 What I did was copy the relevant theme files to a folder in my localtexmf tree,
renamed them (so that they did not collide with the originals), and hacked them.
 Hacking an existing theme is probably faster than cobbling together a new one,
assuming you're happy with most of what the existing theme does.

Paul

Upgrading to LyX-2.0 and MacTeX-2010 broke moderncv

[courosh]

After upgrading to LyX-2.0 and MacTeX-2010, compiling a moderncv document
causes two error messages (from log):
-
! Undefined control sequence.
\hyper@linkurl ...tionraw >>}\relax \Hy@colorlink 
  \@urlcolor
#1\Hy@xspace@en...
l.66 \begin{document}
 
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\close@pdflink ->\Hy@endcolorlink 
  \Hy@VerboseLinkStop \pdfendlink 
l.66 \begin{document}
 
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
-
Here's the preamble:
-
\documentclass[12pt,english]{moderncv}
\usepackage[T1]{fontenc}
\usepackage[latin9]{inputenc}
\setcounter{secnumdepth}{2}
\setcounter{tocdepth}{2}
\setlength{\parskip}{\smallskipamount}
\setlength{\parindent}{0pt}
\usepackage{color}
\usepackage{babel}
\usepackage{textcomp}
\usepackage{setspace}
\ifx\hypersetup\undefined
  \AtBeginDocument{%
\hypersetup{unicode=true,pdfusetitle,
 bookmarks=true,bookmarksnumbered=false,bookmarksopen=false,
 breaklinks=false,pdfborder={0 0 1},backref=false,colorlinks=false}
  }
\else
  \hypersetup{unicode=true,pdfusetitle,
 bookmarks=true,bookmarksnumbered=false,bookmarksopen=false,
 breaklinks=false,pdfborder={0 0 1},backref=false,colorlinks=false}
\fi

\makeatletter
%% User specified LaTeX commands.
\moderncvtheme[blue]{classic}
% possible themes are "classic" and "casual"
% optional argument are 'blue' (default), 'orange', 'red', 'green', 'grey'
and 'roman' (for roman fonts, instead of sans serif fonts)

% required
\firstname{*}
% required
\familyname{*}

% optional, remove the line if not wanted
\title{Curriculum Vitae}

% optional
% \address{street and number}{postcode city}
% '\\' adds a line break
\address{*}{*}

% optional
\phone{*}

% optional
\mobile{*}

% optional
\email{*}

% optional
% \photo[height]{name}
% 'height' is the height the picture is resized to
% 'name' is the name of the picture file

\AtBeginDocument{\maketitle}

\makeatother

\begin{document}
...
-
Any ideas how to fix this?

--
View this message in context: 
http://lyx.475766.n2.nabble.com/Upgrading-to-LyX-2-0-and-MacTeX-2010-broke-moderncv-tp6481546p6481546.html
Sent from the LyX - Users mailing list archive at Nabble.com.

Re: Upgrading to LyX-2.0 and MacTeX-2010 broke moderncv

[Uwe Stöhr]

Am 16.06.2011 04:46, schrieb courosh:


After upgrading to LyX-2.0 and MacTeX-2010, compiling a moderncv document
causes two error messages (from log):


It compiles without problems for me (using MiKTeX 2.9 under Windows). So perhaps your MacTeX-2010 
installation is misconfigured are some packages are missing. Is hypperef installed in your MacTeX-2010?


Does it compile if you are using TeXLive instead of MacTeX?

regards Uwe

Re: Adding a logo to beamer presentation

[Graham Smith]

Paul


> > Each Beamer theme is a collection of LaTeX commands, meaning that
> > instead of using a given theme you could compile several commands
> > (from different themes) that would give you the look you desire. I'd
> > start with Beamer's documentation.
>
> I've customized a few themes (Warsaw, Madrid, Marburg) to add my college's
> logo.
>  What I did was copy the relevant theme files to a folder in my localtexmf
> tree,
> renamed them (so that they did not collide with the originals), and hacked
> them.
>  Hacking an existing theme is probably faster than cobbling together a new
> one,
> assuming you're happy with most of what the existing theme does.
>

I may well try that some time, but for now I will have to compromise.

Thanks,

Graham

Common footnote

[Mark Livingstone]

Hello,

I am using article KOMA-Script. I have a number of unnumbered subsection
headers. For some of them, I want to have a common footnote (ie say five
footnotes that all have a 1 superscript and one footnote entry with the
common footnote text in the footer.)

If this is not possible, can a similar effect be achieved?

Thanks in advance,

MarkL