Basic Question on the elsarticle.lyx template regarding the template specific label
Hi, I am new to LyX and has no latex experience. I went through introduction and the tutorial and that's all I know before I try out the different template (Yes, I can't wait with the new excitement) I am trying to write paper using the elsarticle.lyx template and was confused by the "author label", "author footnote label" and the like. I would like to know how to create them when I am writing paper in lyx as I need them. Currently I can only copy and paste these label and change the content in it for new author, and the corresponding "author footnote label". All I understand is they are not the regular label or footnote that was introduced in the tutorial. Are they template (or document class) specific? I tried to google the answer as well as looking into the help file, but I could not find any mention of such (I must admit I did not go through every single one of them and I simple used the find function with keyword like "author label") Thank you in advance for answering this basic question. Regards, Henry.
Re: TeX capacity exceeded
Don't do that! If you do, you won't find any error and you're likely to screw up your TeX. Please listen to what others have tried to tell you, and try to find out where your error is. It is not TeX's fault, for sure! Although one might blame it for obscure error messages dating back to the dark ages of mainframes, VaXen etc... Good luck - Bon chance! Henry On 11/6/12 2:56 PM, Robert Adolle robert.ado...@orange.fr wrote: I don't find texmf.cnf in /usr, /usr/bin, etc. Where is it ? Is it the right file to raise tex capacity of LyX ? Thanks you ! R.A.
Re: TeX capacity exceeded
Don't do that! If you do, you won't find any error and you're likely to screw up your TeX. Please listen to what others have tried to tell you, and try to find out where your error is. It is not TeX's fault, for sure! Although one might blame it for obscure error messages dating back to the dark ages of mainframes, VaXen etc... Good luck - Bon chance! Henry On 11/6/12 2:56 PM, Robert Adolle robert.ado...@orange.fr wrote: I don't find texmf.cnf in /usr, /usr/bin, etc. Where is it ? Is it the right file to raise tex capacity of LyX ? Thanks you ! R.A.
Re: "TeX capacity exceeded"
Don't do that! If you do, you won't find any error and you're likely to screw up your TeX. Please listen to what others have tried to tell you, and try to find out where your error is. It is not TeX's fault, for sure! Although one might blame it for obscure error messages dating back to the "dark ages" of mainframes, VaXen etc... Good luck - Bon chance! Henry On 11/6/12 2:56 PM, "Robert Adolle" <robert.ado...@orange.fr> wrote: >I don't find "texmf.cnf" in /usr, /usr/bin, etc. >Where is it ? Is it the right file to raise tex capacity of LyX ? >Thanks you ! > >R.A.
LyX2 R sweave
Hi I get this message when I install LyX2 and try to use the sweave module: Allows to use the statistical language S/R as a literate programming tool via Sweave package. See sweave.lyx in examples. Package(s) required: sweave-latex. Modules excluded: LilyPond Book. WARNING: Some required packages are unavailable! How do I find out which packages is missing? (I think sweave-latex is a converter not a package) Henry
LyX2 R sweave
Hi I get this message when I install LyX2 and try to use the sweave module: Allows to use the statistical language S/R as a literate programming tool via Sweave package. See sweave.lyx in examples. Package(s) required: sweave-latex. Modules excluded: LilyPond Book. WARNING: Some required packages are unavailable! How do I find out which packages is missing? (I think sweave-latex is a converter not a package) Henry
LyX2 R sweave
Hi I get this message when I install LyX2 and try to use the sweave module: Allows to use the statistical language S/R as a literate programming tool via Sweave package. See sweave.lyx in examples. Package(s) required: sweave->latex. Modules excluded: LilyPond Book. WARNING: Some required packages are unavailable! How do I find out which packages is missing? (I think "sweave->latex" is a converter not a package) Henry
Re: fun poll: your linux distro
My family uses 1.3.6 on three Ubuntu 6.06 LTS boxes for books, articles, reports, Broadway, and classroom materials. I've home built 1.5.2 for Ubuntu Feisty for testing. Have not decided to upgrade the rest yet but will test 1.5.3 soon. An open-source project that I work with, the Enhanced Machine Controller also uses 1.3.6 extensively for documentation. Lyx files are included in the CVS for the project. We offer the option of automatic document preparation during make and provide automated updates if changes are made to the lyx code for the developer versions of documents on our site. That documentation runs several hundred pages of PDF and quite a stack of HTML. The curious can browse/download at http://www.linuxcnc.org/docs/devel/. Really intrepid explorers are welcome at http://cvs.linuxcnc.org/cvs/emc2/docs/src/ Thanks to all for a great product, great service, and really quick help. Ray Henry
Re: fun poll: your linux distro
My family uses 1.3.6 on three Ubuntu 6.06 LTS boxes for books, articles, reports, Broadway, and classroom materials. I've home built 1.5.2 for Ubuntu Feisty for testing. Have not decided to upgrade the rest yet but will test 1.5.3 soon. An open-source project that I work with, the Enhanced Machine Controller also uses 1.3.6 extensively for documentation. Lyx files are included in the CVS for the project. We offer the option of automatic document preparation during make and provide automated updates if changes are made to the lyx code for the developer versions of documents on our site. That documentation runs several hundred pages of PDF and quite a stack of HTML. The curious can browse/download at http://www.linuxcnc.org/docs/devel/. Really intrepid explorers are welcome at http://cvs.linuxcnc.org/cvs/emc2/docs/src/ Thanks to all for a great product, great service, and really quick help. Ray Henry
Re: fun poll: your linux distro
My family uses 1.3.6 on three Ubuntu 6.06 LTS boxes for books, articles, reports, Broadway, and classroom materials. I've home built 1.5.2 for Ubuntu Feisty for testing. Have not decided to upgrade the rest yet but will test 1.5.3 soon. An open-source project that I work with, the Enhanced Machine Controller also uses 1.3.6 extensively for documentation. Lyx files are included in the CVS for the project. We offer the option of automatic document preparation during make and provide automated updates if changes are made to the lyx code for the developer versions of documents on our site. That documentation runs several hundred pages of PDF and quite a stack of HTML. The curious can browse/download at http://www.linuxcnc.org/docs/devel/. Really intrepid explorers are welcome at http://cvs.linuxcnc.org/cvs/emc2/docs/src/ Thanks to all for a great product, great service, and really quick help. Ray Henry
horizontal spacing in table of contents
My table of contents looses the space between the number and name when numbers become greater than 10. This is 1.3.6 qt using pdflatex on a standard Ubuntu install. Ray
horizontal spacing in table of contents
My table of contents looses the space between the number and name when numbers become greater than 10. This is 1.3.6 qt using pdflatex on a standard Ubuntu install. Ray
horizontal spacing in table of contents
My table of contents looses the space between the number and name when numbers become greater than 10. This is 1.3.6 qt using pdflatex on a standard Ubuntu install. Ray
figures in a table
I'm creating a 10x10 table. The first column is filled with small images. It is set to zero width. The other columns are all set to fixed width and have text wrapped. When the the image is inserted it creates space at the top of the row and pushes down the text in the other cells. The images are sized to fit inside a cell without creating additional space. What can I do to minimize the affect of inserting these images. Rayh
figures in a table
I'm creating a 10x10 table. The first column is filled with small images. It is set to zero width. The other columns are all set to fixed width and have text wrapped. When the the image is inserted it creates space at the top of the row and pushes down the text in the other cells. The images are sized to fit inside a cell without creating additional space. What can I do to minimize the affect of inserting these images. Rayh
figures in a table
I'm creating a 10x10 table. The first column is filled with small images. It is set to zero width. The other columns are all set to fixed width and have text wrapped. When the the image is inserted it creates space at the top of the row and pushes down the text in the other cells. The images are sized to fit inside a cell without creating additional space. What can I do to minimize the affect of inserting these images. Rayh
Re: No preview, export works
Changing LyX Preferences:File Formats:Viewer to open from gv for PDF and Postscript worked. Thank you! I also loaded ghostview for X11 and the prerequisites, and that gave me a preview in X11. Cool!. Thank you for your help, time, and efforts. Hank On Aug 24, 2005, at 12:21 AM, Helm Bennett wrote: On Aug 23, 2005, at 5:37 PM, Martin Henry H. Stevens wrote: I am using LyX 1.3.6 and today's versions of prerequisite software for my Mac OS 10.3.9 My export works (converting to pdf and ps), but my preview does not show up on my screen. Console output, for when I try View\PDF is as follows: = Tue Aug 23 2005 = 17:35:44 US/Eastern = snip dyld: gv can't open library: /usr/X11R6/lib/libXaw3d.7.dylib (No such file or directory, errno = 2) This line indicates the problem you're having is not with LyX but rather with gv -- a pdf viewer that uses X11. Change your preferences in LyX to set the default viewer for all .pdf and files to open, and you'll get these files to open in your system default viewers (which, unless you've changed it, is Preview.app). Bennett Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Re: No preview, export works
Changing LyX Preferences:File Formats:Viewer to open from gv for PDF and Postscript worked. Thank you! I also loaded ghostview for X11 and the prerequisites, and that gave me a preview in X11. Cool!. Thank you for your help, time, and efforts. Hank On Aug 24, 2005, at 12:21 AM, Helm Bennett wrote: On Aug 23, 2005, at 5:37 PM, Martin Henry H. Stevens wrote: I am using LyX 1.3.6 and today's versions of prerequisite software for my Mac OS 10.3.9 My export works (converting to pdf and ps), but my preview does not show up on my screen. Console output, for when I try View\PDF is as follows: = Tue Aug 23 2005 = 17:35:44 US/Eastern = snip dyld: gv can't open library: /usr/X11R6/lib/libXaw3d.7.dylib (No such file or directory, errno = 2) This line indicates the problem you're having is not with LyX but rather with gv -- a pdf viewer that uses X11. Change your preferences in LyX to set the default viewer for all .pdf and files to open, and you'll get these files to open in your system default viewers (which, unless you've changed it, is Preview.app). Bennett Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Re: No preview, export works
Changing LyX Preferences:File Formats:Viewer to open from gv for PDF and Postscript worked. Thank you! I also loaded ghostview for X11 and the prerequisites, and that gave me a preview in X11. Cool!. Thank you for your help, time, and efforts. Hank On Aug 24, 2005, at 12:21 AM, Helm Bennett wrote: On Aug 23, 2005, at 5:37 PM, Martin Henry H. Stevens wrote: I am using LyX 1.3.6 and today's versions of prerequisite software for my Mac OS 10.3.9 My export works (converting to pdf and ps), but my preview does not show up on my screen. Console output, for when I try View\PDF is as follows: = Tue Aug 23 2005 = 17:35:44 US/Eastern = dyld: gv can't open library: /usr/X11R6/lib/libXaw3d.7.dylib (No such file or directory, errno = 2) This line indicates the problem you're having is not with LyX but rather with gv -- a pdf viewer that uses X11. Change your preferences in LyX to set the default viewer for all .pdf and files to "open", and you'll get these files to open in your system default viewers (which, unless you've changed it, is Preview.app). Bennett Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
No preview, export works
I am using LyX 1.3.6 and today's versions of prerequisite software for my Mac OS 10.3.9 My export works (converting to pdf and ps), but my preview does not show up on my screen. Console output, for when I try View\PDF is as follows: = Tue Aug 23 2005 = 17:35:44 US/Eastern = This is dvips(k) 5.94b Copyright 2004 Radical Eye Software (www.radicaleye.com) ' TeX output 2005.08.23:1731' - Week_1_Dynamics.ps texc.procm-super-t1.enctexps.prospecial.pro. sfcc1000.pfb cmmi7.pfbcmex10.pfbcmmi10.pfbcmr10.pfbsfti1000.pfbcmsy10.pfb sfrm0600.pfbsfbx1000.pfbsfrm0800.pfbsfbx1200.pfbsfbx1440.pfb sfrm1000.pfbsfrm1200.pfbsfrm1728.pfb[1 /tmp/lyx_tmpdir5500tTO04B/lyx_tmpbuf0/ 1_Users_Hank_Documents_Courses_671_Lectures_Week01_Week_1_Hastings2004.e ps] [2 /tmp/lyx_tmpdir5500tTO04B/lyx_tmpbuf0/ 4_Users_Hank_Documents_Courses_671_Lectures_Week01_Clark_and_MacLanchan_ 2003_2.eps] [3 /tmp/lyx_tmpdir5500tTO04B/lyx_tmpbuf0/ 2_Users_Hank_Documents_Courses_671_Lectures_Week01_Petchey_2000a4.eps] [4] [5] [6] dyld: gv can't open library: /usr/X11R6/lib/libXaw3d.7.dylib (No such file or directory, errno = 2) Aug 23 17:36:01 MHHS crashdump: Unable to determine CPSProcessSerNum pid: 5624 name: gv Aug 23 17:36:01 MHHS crashdump: Started writing crash report to: /Users/Hank/Library/Logs/CrashReporter/gv.crash.log Aug 23 17:36:01 MHHS crashdump: Finished writing crash report to: /Users/Hank/Library/Logs/CrashReporter/gv.crash.log Thanks for any tips! Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
No preview, export works
I am using LyX 1.3.6 and today's versions of prerequisite software for my Mac OS 10.3.9 My export works (converting to pdf and ps), but my preview does not show up on my screen. Console output, for when I try View\PDF is as follows: = Tue Aug 23 2005 = 17:35:44 US/Eastern = This is dvips(k) 5.94b Copyright 2004 Radical Eye Software (www.radicaleye.com) ' TeX output 2005.08.23:1731' - Week_1_Dynamics.ps texc.procm-super-t1.enctexps.prospecial.pro. sfcc1000.pfb cmmi7.pfbcmex10.pfbcmmi10.pfbcmr10.pfbsfti1000.pfbcmsy10.pfb sfrm0600.pfbsfbx1000.pfbsfrm0800.pfbsfbx1200.pfbsfbx1440.pfb sfrm1000.pfbsfrm1200.pfbsfrm1728.pfb[1 /tmp/lyx_tmpdir5500tTO04B/lyx_tmpbuf0/ 1_Users_Hank_Documents_Courses_671_Lectures_Week01_Week_1_Hastings2004.e ps] [2 /tmp/lyx_tmpdir5500tTO04B/lyx_tmpbuf0/ 4_Users_Hank_Documents_Courses_671_Lectures_Week01_Clark_and_MacLanchan_ 2003_2.eps] [3 /tmp/lyx_tmpdir5500tTO04B/lyx_tmpbuf0/ 2_Users_Hank_Documents_Courses_671_Lectures_Week01_Petchey_2000a4.eps] [4] [5] [6] dyld: gv can't open library: /usr/X11R6/lib/libXaw3d.7.dylib (No such file or directory, errno = 2) Aug 23 17:36:01 MHHS crashdump: Unable to determine CPSProcessSerNum pid: 5624 name: gv Aug 23 17:36:01 MHHS crashdump: Started writing crash report to: /Users/Hank/Library/Logs/CrashReporter/gv.crash.log Aug 23 17:36:01 MHHS crashdump: Finished writing crash report to: /Users/Hank/Library/Logs/CrashReporter/gv.crash.log Thanks for any tips! Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
No preview, export works
I am using LyX 1.3.6 and today's versions of prerequisite software for my Mac OS 10.3.9 My export works (converting to pdf and ps), but my preview does not show up on my screen. Console output, for when I try View\PDF is as follows: = Tue Aug 23 2005 = 17:35:44 US/Eastern = This is dvips(k) 5.94b Copyright 2004 Radical Eye Software (www.radicaleye.com) ' TeX output 2005.08.23:1731' -> Week_1_Dynamics.ps . [1 1_Users_Hank_Documents_Courses_671_Lectures_Week01_Week_1_Hastings2004.e ps>] [2 4_Users_Hank_Documents_Courses_671_Lectures_Week01_Clark_and_MacLanchan_ 2003_2.eps>] [3 2_Users_Hank_Documents_Courses_671_Lectures_Week01_Petchey_2000a4.eps>] [4] [5] [6] dyld: gv can't open library: /usr/X11R6/lib/libXaw3d.7.dylib (No such file or directory, errno = 2) Aug 23 17:36:01 MHHS crashdump: Unable to determine CPSProcessSerNum pid: 5624 name: gv Aug 23 17:36:01 MHHS crashdump: Started writing crash report to: /Users/Hank/Library/Logs/CrashReporter/gv.crash.log Aug 23 17:36:01 MHHS crashdump: Finished writing crash report to: /Users/Hank/Library/Logs/CrashReporter/gv.crash.log Thanks for any tips! Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
wrap in LyX-code
I am using LyX 1.3.5 on a Mac with OS 10.3.9 I was wondering if there is a way to do line wrap in the LyX code format. I am writing a manual that uses the R language, and I have a lot of lines in the code that I would like to wrap, rather than add a hard return and begin a new line. I checked the User Guide and Extended features, but found nothing. Any suggestions or points-in-the-right-direction? cheers, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
wrap in LyX-code
I am using LyX 1.3.5 on a Mac with OS 10.3.9 I was wondering if there is a way to do line wrap in the LyX code format. I am writing a manual that uses the R language, and I have a lot of lines in the code that I would like to wrap, rather than add a hard return and begin a new line. I checked the User Guide and Extended features, but found nothing. Any suggestions or points-in-the-right-direction? cheers, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
wrap in LyX-code
I am using LyX 1.3.5 on a Mac with OS 10.3.9 I was wondering if there is a way to do line wrap in the LyX code format. I am writing a manual that uses the R language, and I have a lot of lines in the code that I would like to wrap, rather than add a hard return and begin a new line. I checked the User Guide and Extended features, but found nothing. Any suggestions or points-in-the-right-direction? cheers, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
Re: NSF proposals
That did it! I think you and Samar have done it! thank you! I use fancy in the menu, and then ERT \fancyhead{} %Clears header fields \cfoot{Project Description - \thepage} At the beginning of the references I use ERT \setcounter{page}{1} \cfoot{References Cited - \thepage} I can then cut the Refs off in Adobe Acrobat (I guess my next step is to do it in ghostscript...?) Oh, well, it works! Cheers, Hank On Jul 1, 2005, at 5:37 PM, Todd Denniston wrote: Martin Henry H. Stevens wrote: I don't understand. I have already built one huge .bib file that contains ALL of my references for ALL of my research. I link to that with Insert-Lists TOC-BibTeX Reference, and then LyX very nicely generates a formatted References Cited section. My problem is that I need that section numbered from 1 - n, with References Cited, p. #. I tried \cfoot{References Cited - \thepage-15} Ah, the dash is literaly put in, not a math thing. What you want, is on the page you want to restart the page counting. insert an ERT, on the page you want to be numbered 1, and in the ERT put: \setcounter{page}{1} but it didn't subtract 15 from the document page number Well, I tried! Thoughts? Hank On Jul 1, 2005, at 4:00 PM, Todd Denniston wrote: Todd Denniston wrote: Martin Henry H. Stevens wrote: SNIP I think I need the .bib file, a separate file that contains the (formatted) references cited in the document, and which has it's own page numbering Is that better? SNIP Ack... on re-reading your question, I see a different light. if you make a separate LyX (not bib) file, you will definitely need to use samar's trick of putting in ERT \: \nocite{*} ... after having built the .bib and pulled it in to the LyX file with Insert-Lists TOC-BibTeX Reference . SNIP -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Re: NSF proposals
That did it! I think you and Samar have done it! thank you! I use fancy in the menu, and then ERT \fancyhead{} %Clears header fields \cfoot{Project Description - \thepage} At the beginning of the references I use ERT \setcounter{page}{1} \cfoot{References Cited - \thepage} I can then cut the Refs off in Adobe Acrobat (I guess my next step is to do it in ghostscript...?) Oh, well, it works! Cheers, Hank On Jul 1, 2005, at 5:37 PM, Todd Denniston wrote: Martin Henry H. Stevens wrote: I don't understand. I have already built one huge .bib file that contains ALL of my references for ALL of my research. I link to that with Insert-Lists TOC-BibTeX Reference, and then LyX very nicely generates a formatted References Cited section. My problem is that I need that section numbered from 1 - n, with References Cited, p. #. I tried \cfoot{References Cited - \thepage-15} Ah, the dash is literaly put in, not a math thing. What you want, is on the page you want to restart the page counting. insert an ERT, on the page you want to be numbered 1, and in the ERT put: \setcounter{page}{1} but it didn't subtract 15 from the document page number Well, I tried! Thoughts? Hank On Jul 1, 2005, at 4:00 PM, Todd Denniston wrote: Todd Denniston wrote: Martin Henry H. Stevens wrote: SNIP I think I need the .bib file, a separate file that contains the (formatted) references cited in the document, and which has it's own page numbering Is that better? SNIP Ack... on re-reading your question, I see a different light. if you make a separate LyX (not bib) file, you will definitely need to use samar's trick of putting in ERT \: \nocite{*} ... after having built the .bib and pulled it in to the LyX file with Insert-Lists TOC-BibTeX Reference . SNIP -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Re: NSF proposals
That did it! I think you and Samar have done it! thank you! I use fancy in the menu, and then ERT \fancyhead{} %Clears header fields \cfoot{Project Description - \thepage} At the beginning of the references I use ERT \setcounter{page}{1} \cfoot{References Cited - \thepage} I can then cut the Refs off in Adobe Acrobat (I guess my next step is to do it in ghostscript...?) Oh, well, it works! Cheers, Hank On Jul 1, 2005, at 5:37 PM, Todd Denniston wrote: "Martin Henry H. Stevens" wrote: I don't understand. I have already built one huge .bib file that contains ALL of my references for ALL of my research. I link to that with Insert->Lists & TOC->BibTeX Reference, and then LyX very nicely generates a formatted References Cited section. My problem is that I need that section numbered from 1 - n, with "References Cited, p. #". I tried \cfoot{References Cited - \thepage-15} Ah, the dash is literaly put in, not a math thing. What you want, is on the page you want to restart the page counting. insert an ERT, on the page you want to be numbered 1, and in the ERT put: \setcounter{page}{1} but it didn't subtract 15 from the document page number Well, I tried! Thoughts? Hank On Jul 1, 2005, at 4:00 PM, Todd Denniston wrote: Todd Denniston wrote: "Martin Henry H. Stevens" wrote: I think I need the .bib file, a separate file that contains the (formatted) references cited in the document, and which has it's own page numbering Is that better? Ack... on re-reading your question, I see a different light. if you make a separate LyX (not bib) file, you will definitely need to use samar's trick of putting in ERT \: \nocite{*} ... after having built the .bib and pulled it in to the LyX file with Insert->Lists & TOC->BibTeX Reference . -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
Line numbering
I would like to add a number in the margin of each line in a manuscript (either sequential, or re-starting on each page), but I have been unable to find anything on the topic in the User Guide or Extended help (or in Google line number and LyX). I would be grateful for any and all leads. Cheers! Hank -- Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Line numbering
I would like to add a number in the margin of each line in a manuscript (either sequential, or re-starting on each page), but I have been unable to find anything on the topic in the User Guide or Extended help (or in Google line number and LyX). I would be grateful for any and all leads. Cheers! Hank -- Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Line numbering
I would like to add a number in the margin of each line in a manuscript (either sequential, or re-starting on each page), but I have been unable to find anything on the topic in the User Guide or Extended help (or in Google "line number" and LyX). I would be grateful for any and all leads. Cheers! Hank -- Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
Re: Prosper question
Two ways: 1. A long title will wrap. 2. Insert:special character:line break. Myriam Abramson wrote: How can I have a 2-line title? TIA
Re: Prosper question
Two ways: 1. A long title will wrap. 2. Insert:special character:line break. Myriam Abramson wrote: How can I have a 2-line title? TIA
Re: Prosper question
Two ways: 1. A long title will wrap. 2. Insert:special character:line break. Myriam Abramson wrote: How can I have a 2-line title? TIA
Author field
LyX 1.3.4/5, Mac OS 10.3.7 When I use the Author field, LyX won't wrap author names or allow me to use multiple lines of authors. Instead, it keeps everything on one line that extends through the margin and off the page. I would be deeply indebted to anyone who could supply pointers toward a solution. Thanks in advance, Hank Stevens
Author field
LyX 1.3.4/5, Mac OS 10.3.7 When I use the Author field, LyX won't wrap author names or allow me to use multiple lines of authors. Instead, it keeps everything on one line that extends through the margin and off the page. I would be deeply indebted to anyone who could supply pointers toward a solution. Thanks in advance, Hank Stevens
Author field
LyX 1.3.4/5, Mac OS 10.3.7 When I use the Author field, LyX won't wrap author names or allow me to use multiple lines of authors. Instead, it keeps everything on one line that extends through the margin and off the page. I would be deeply indebted to anyone who could supply pointers toward a solution. Thanks in advance, Hank Stevens
style files not working
LyX 1.3.5 on Mac OS 10.3.6 I am relatively new to LyX and even less familiar with the hardcore stuff (LaTex). I have a consistent problem in using style files in BibTex, wherein I select an (author, year) format and it doesn't translate into ps or pdf properly. In a document, I successfully included my .bib file and a style file. I use the menu (Insert:Citation reference...) to include a citation reference. The math number formats (e.g., [1],[23]) seem to work fine. However, other styles do not. Example: What I would like to see: ...an open question (Hairston et al. 1960). LyX code ...an open question [Hairston1960]. [where Hairston1960 is my BibTex key, and it shows up in a gray box]. PDF ...an open question [Hairston et al. (1960) Hairston, Smith, and Slobodkin]. [with square brackets instead of parentheses, and with extra names and parentheses inside the brackets] In addition, the citations sometimes stick out into the margin. Any suggestions or links or anything is welcome. Thanks, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Re: style files not working
Thanks to Bennett! natbib and the citation reference dialogue fixed it all! Thank you so! Hank On Jan 5, 2005, at 3:30 PM, Bennett Helm wrote: On Jan 5, 2005, at 3:05 PM, Martin Henry H. Stevens wrote: LyX 1.3.5 on Mac OS 10.3.6 I am relatively new to LyX and even less familiar with the hardcore stuff (LaTex). I have a consistent problem in using style files in BibTex, wherein I select an (author, year) format and it doesn't translate into ps or pdf properly. In a document, I successfully included my .bib file and a style file. I use the menu (Insert:Citation reference...) to include a citation reference. The math number formats (e.g., [1],[23]) seem to work fine. However, other styles do not. Example: What I would like to see: ...an open question (Hairston et al. 1960). LyX code ...an open question [Hairston1960]. [where Hairston1960 is my BibTex key, and it shows up in a gray box]. PDF ...an open question [Hairston et al. (1960) Hairston, Smith, and Slobodkin]. [with square brackets instead of parentheses, and with extra names and parentheses inside the brackets] In addition, the citations sometimes stick out into the margin. Have you selected Use NatBib? -- Layout - Document ... Bibliography Bennett Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
error loading .ps graphics
LyX 1.3.5 Mac OS 10.3.7 When trying to load a postscript graphic, my graphic insert says Error converting to loadable format and my console spits out the following: PreviewLoader::startLoading() No converter from lyxpreview format has been defined. Unrecoverable error: rangecheck in get Operand stack: hrsyr.gsf0 Unrecoverable error: rangecheck in get Operand stack: hrsyr.gsf0 convert: Postscript delegate failed. /Applications/LyX.app/Contents/Resources/lyx/scripts/convertDefault.sh ERROR Execution of convert failed. I AM ABLE to use .ps graphics on my Mac laptop running LyX 1.3.4. I have checked the Preferences dialogues on the two computers to make sure the Converters appear identical and they do appear identical. Any thoughts? Many thanks, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
style files not working
LyX 1.3.5 on Mac OS 10.3.6 I am relatively new to LyX and even less familiar with the hardcore stuff (LaTex). I have a consistent problem in using style files in BibTex, wherein I select an (author, year) format and it doesn't translate into ps or pdf properly. In a document, I successfully included my .bib file and a style file. I use the menu (Insert:Citation reference...) to include a citation reference. The math number formats (e.g., [1],[23]) seem to work fine. However, other styles do not. Example: What I would like to see: ...an open question (Hairston et al. 1960). LyX code ...an open question [Hairston1960]. [where Hairston1960 is my BibTex key, and it shows up in a gray box]. PDF ...an open question [Hairston et al. (1960) Hairston, Smith, and Slobodkin]. [with square brackets instead of parentheses, and with extra names and parentheses inside the brackets] In addition, the citations sometimes stick out into the margin. Any suggestions or links or anything is welcome. Thanks, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Re: style files not working
Thanks to Bennett! natbib and the citation reference dialogue fixed it all! Thank you so! Hank On Jan 5, 2005, at 3:30 PM, Bennett Helm wrote: On Jan 5, 2005, at 3:05 PM, Martin Henry H. Stevens wrote: LyX 1.3.5 on Mac OS 10.3.6 I am relatively new to LyX and even less familiar with the hardcore stuff (LaTex). I have a consistent problem in using style files in BibTex, wherein I select an (author, year) format and it doesn't translate into ps or pdf properly. In a document, I successfully included my .bib file and a style file. I use the menu (Insert:Citation reference...) to include a citation reference. The math number formats (e.g., [1],[23]) seem to work fine. However, other styles do not. Example: What I would like to see: ...an open question (Hairston et al. 1960). LyX code ...an open question [Hairston1960]. [where Hairston1960 is my BibTex key, and it shows up in a gray box]. PDF ...an open question [Hairston et al. (1960) Hairston, Smith, and Slobodkin]. [with square brackets instead of parentheses, and with extra names and parentheses inside the brackets] In addition, the citations sometimes stick out into the margin. Have you selected Use NatBib? -- Layout - Document ... Bibliography Bennett Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
error loading .ps graphics
LyX 1.3.5 Mac OS 10.3.7 When trying to load a postscript graphic, my graphic insert says Error converting to loadable format and my console spits out the following: PreviewLoader::startLoading() No converter from lyxpreview format has been defined. Unrecoverable error: rangecheck in get Operand stack: hrsyr.gsf0 Unrecoverable error: rangecheck in get Operand stack: hrsyr.gsf0 convert: Postscript delegate failed. /Applications/LyX.app/Contents/Resources/lyx/scripts/convertDefault.sh ERROR Execution of convert failed. I AM ABLE to use .ps graphics on my Mac laptop running LyX 1.3.4. I have checked the Preferences dialogues on the two computers to make sure the Converters appear identical and they do appear identical. Any thoughts? Many thanks, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
style files not working
LyX 1.3.5 on Mac OS 10.3.6 I am relatively new to LyX and even less familiar with the hardcore stuff (LaTex). I have a consistent problem in using style files in BibTex, wherein I select an (author, year) format and it doesn't translate into ps or pdf properly. In a document, I successfully included my .bib file and a style file. I use the menu (Insert:Citation reference...) to include a citation reference. The math number formats (e.g., [1],[23]) seem to work fine. However, other styles do not. Example: What I would like to see: "...an open question (Hairston et al. 1960)." LyX code "...an open question [Hairston1960]." [where Hairston1960 is my BibTex key, and it shows up in a gray box]. PDF "...an open question [Hairston et al. (1960) Hairston, Smith, and Slobodkin]." [with square brackets instead of parentheses, and with extra names and parentheses inside the brackets] In addition, the citations sometimes stick out into the margin. Any suggestions or links or anything is welcome. Thanks, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
Re: style files not working
Thanks to Bennett! natbib and the citation reference dialogue fixed it all! Thank you so! Hank On Jan 5, 2005, at 3:30 PM, Bennett Helm wrote: On Jan 5, 2005, at 3:05 PM, Martin Henry H. Stevens wrote: LyX 1.3.5 on Mac OS 10.3.6 I am relatively new to LyX and even less familiar with the hardcore stuff (LaTex). I have a consistent problem in using style files in BibTex, wherein I select an (author, year) format and it doesn't translate into ps or pdf properly. In a document, I successfully included my .bib file and a style file. I use the menu (Insert:Citation reference...) to include a citation reference. The math number formats (e.g., [1],[23]) seem to work fine. However, other styles do not. Example: What I would like to see: "...an open question (Hairston et al. 1960)." LyX code "...an open question [Hairston1960]." [where Hairston1960 is my BibTex key, and it shows up in a gray box]. PDF "...an open question [Hairston et al. (1960) Hairston, Smith, and Slobodkin]." [with square brackets instead of parentheses, and with extra names and parentheses inside the brackets] In addition, the citations sometimes stick out into the margin. Have you selected Use NatBib? -- Layout -> Document ... > Bibliography Bennett Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
error loading .ps graphics
LyX 1.3.5 Mac OS 10.3.7 When trying to load a postscript graphic, my graphic insert says "Error converting to loadable format" and my console spits out the following: PreviewLoader::startLoading() No converter from "lyxpreview" format has been defined. Unrecoverable error: rangecheck in get Operand stack: hrsyr.gsf0 Unrecoverable error: rangecheck in get Operand stack: hrsyr.gsf0 convert: Postscript delegate failed. /Applications/LyX.app/Contents/Resources/lyx/scripts/convertDefault.sh ERROR Execution of "convert" failed. I AM ABLE to use .ps graphics on my Mac laptop running LyX 1.3.4. I have checked the Preferences dialogues on the two computers to make sure the Converters appear identical and they do appear identical. Any thoughts? Many thanks, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
Right out of the box
Subject: RE: chapter heading on blank page and too much text in chapter heading From: Jack T. Gill [EMAIL PROTECTED] Date: Wed, 29 Dec 2004 20:11:22 -0600 To: lyx-users@lists.lyx.org s Does anyone use LyX right out of the box (or download) without all the tweaking? If so, to what use are you putting it? We've used LyX for years right out of the box and are pleased with the results. Used for User, Integrator, and Developer handbooks (about 300 pages) for an open source machine control project at sourceforge. Have distributed pdf and html versions without serious problems and have seen orders of magnitude advance in ease of operation and quality of product over the years. Thanks to each developer for a fine product. Ray Henry, Ph.D.
Right out of the box
Subject: RE: chapter heading on blank page and too much text in chapter heading From: Jack T. Gill [EMAIL PROTECTED] Date: Wed, 29 Dec 2004 20:11:22 -0600 To: lyx-users@lists.lyx.org s Does anyone use LyX right out of the box (or download) without all the tweaking? If so, to what use are you putting it? We've used LyX for years right out of the box and are pleased with the results. Used for User, Integrator, and Developer handbooks (about 300 pages) for an open source machine control project at sourceforge. Have distributed pdf and html versions without serious problems and have seen orders of magnitude advance in ease of operation and quality of product over the years. Thanks to each developer for a fine product. Ray Henry, Ph.D.
Right out of the box
Subject: RE: chapter heading on blank page and too much text in chapter heading From: "Jack T. Gill" <[EMAIL PROTECTED]> Date: Wed, 29 Dec 2004 20:11:22 -0600 To: <lyx-users@lists.lyx.org> Does anyone use LyX right out of the box (or download) without all the tweaking? If so, to what use are you putting it? We've used LyX for years right out of the box and are pleased with the results. Used for User, Integrator, and Developer handbooks (about 300 pages) for an open source machine control project at sourceforge. Have distributed pdf and html versions without serious problems and have seen orders of magnitude advance in ease of operation and quality of product over the years. Thanks to each developer for a fine product. Ray Henry, Ph.D.
Centering graphics in float
LyX 1.3.5 on Mac OS 10.3.6 All my figures in LyX are positioned on the left margin. Is there a reason for this, and how would I get LyX to center them horizontally? (I would rather wrap, but that doesn't seem to work too well!) Thanks, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Re: Centering graphics in float - Solution
Thanks Rich! Perfect solution. hank On Nov 16, 2004, at 11:31 AM, Rich Shepard wrote: On Tue, 16 Nov 2004, Martin Henry H. Stevens wrote: LyX 1.3.5 on Mac OS 10.3.6 All my figures in LyX are positioned on the left margin. Is there a reason for this, and how would I get LyX to center them horizontally? (I would rather wrap, but that doesn't seem to work too well!) Hank, The platform shouldn't matter. Place the cursor to the left of the image box then select the Layout - Paragraph - Center option. Click OK. Rich -- Dr. Richard B. Shepard, President Applied Ecosystem Services, Inc. (TM) http://www.appl-ecosys.com Voice: 503-667-4517 Fax: 503-667-8863 Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Centering graphics in float
LyX 1.3.5 on Mac OS 10.3.6 All my figures in LyX are positioned on the left margin. Is there a reason for this, and how would I get LyX to center them horizontally? (I would rather wrap, but that doesn't seem to work too well!) Thanks, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Re: Centering graphics in float - Solution
Thanks Rich! Perfect solution. hank On Nov 16, 2004, at 11:31 AM, Rich Shepard wrote: On Tue, 16 Nov 2004, Martin Henry H. Stevens wrote: LyX 1.3.5 on Mac OS 10.3.6 All my figures in LyX are positioned on the left margin. Is there a reason for this, and how would I get LyX to center them horizontally? (I would rather wrap, but that doesn't seem to work too well!) Hank, The platform shouldn't matter. Place the cursor to the left of the image box then select the Layout - Paragraph - Center option. Click OK. Rich -- Dr. Richard B. Shepard, President Applied Ecosystem Services, Inc. (TM) http://www.appl-ecosys.com Voice: 503-667-4517 Fax: 503-667-8863 Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Centering graphics in float
LyX 1.3.5 on Mac OS 10.3.6 All my figures in LyX are positioned on the left margin. Is there a reason for this, and how would I get LyX to center them horizontally? (I would rather wrap, but that doesn't seem to work too well!) Thanks, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
Re: Centering graphics in float - Solution
Thanks Rich! Perfect solution. hank On Nov 16, 2004, at 11:31 AM, Rich Shepard wrote: On Tue, 16 Nov 2004, Martin Henry H. Stevens wrote: LyX 1.3.5 on Mac OS 10.3.6 All my figures in LyX are positioned on the left margin. Is there a reason for this, and how would I get LyX to center them horizontally? (I would rather wrap, but that doesn't seem to work too well!) Hank, The platform shouldn't matter. Place the cursor to the left of the image box then select the "Layout -> Paragraph -> Center" option. Click "OK". Rich -- Dr. Richard B. Shepard, President Applied Ecosystem Services, Inc. (TM) <http://www.appl-ecosys.com> Voice: 503-667-4517 Fax: 503-667-8863 Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
Error loading any ps, eps, or pdf image
Running Mac OS 10.3.5, LyX 1.3.5, and latest versions of Imagemagik, Ghostscript 8, FreeType2, and libwmf from Wierda's i-installer. I did not load the iconv script, because of warnings of dire consequences if I did not know what I was doing (which I don't). In any event the iconv script failed to load, by design, apparently. Anyway, on my desktop, I cannot load any eps, ps, or pdf image. I can load jpg and png files. I adding a new converter in LyX/Preferences/Converter, From: PDF (ps to pdf) #only option for PDF To: EPS Converter: pdf2ps $$i $$o but to no avail. Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Error loading any ps, eps, or pdf image
Running Mac OS 10.3.5, LyX 1.3.5, and latest versions of Imagemagik, Ghostscript 8, FreeType2, and libwmf from Wierda's i-installer. I did not load the iconv script, because of warnings of dire consequences if I did not know what I was doing (which I don't). In any event the iconv script failed to load, by design, apparently. Anyway, on my desktop, I cannot load any eps, ps, or pdf image. I can load jpg and png files. I adding a new converter in LyX/Preferences/Converter, From: PDF (ps to pdf) #only option for PDF To: EPS Converter: pdf2ps $$i $$o but to no avail. Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
Error loading any ps, eps, or pdf image
Running Mac OS 10.3.5, LyX 1.3.5, and latest versions of Imagemagik, Ghostscript 8, FreeType2, and libwmf from Wierda's i-installer. I did not load the iconv script, because of warnings of dire consequences if I did not know what I was doing (which I don't). In any event the iconv script failed to load, by design, apparently. Anyway, on my desktop, I cannot load any eps, ps, or pdf image. I can load jpg and png files. I adding a new converter in LyX/Preferences/Converter, From: PDF (ps to pdf) #only option for PDF To: EPS Converter: pdf2ps $$i $$o but to no avail. Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
error loading pdf images
I am running Mac OS 10.3.5 and LyX 1.3.5. I get an error when I try to incorporate a pdf image into a LyX file. In place of the image it states Error converting to loadable format. The error message I get when trying to convert to postscript reads LaTeX Error: File `/tmp/lyx_tmpdir10732GLmAp/lyx_tmpbuf0/_Users_Hank_Document ..._Users_Hank_Documents_671_Classes_Rplots} I could not locate the file with any of these extensions: .eps,.ps,.eps.gz,.ps.gz,.eps.Z Try typing return to proceed. If that doesn't work, type X return to quit. I don't know how to get LyX to load pdf images. (It seems to work fine on another Mac machine - my laptop). Any thought would be very appreciated. TIA, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
error loading pdf images
I am running Mac OS 10.3.5 and LyX 1.3.5. I get an error when I try to incorporate a pdf image into a LyX file. In place of the image it states Error converting to loadable format. The error message I get when trying to convert to postscript reads LaTeX Error: File `/tmp/lyx_tmpdir10732GLmAp/lyx_tmpbuf0/_Users_Hank_Document ..._Users_Hank_Documents_671_Classes_Rplots} I could not locate the file with any of these extensions: .eps,.ps,.eps.gz,.ps.gz,.eps.Z Try typing return to proceed. If that doesn't work, type X return to quit. I don't know how to get LyX to load pdf images. (It seems to work fine on another Mac machine - my laptop). Any thought would be very appreciated. TIA, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ E Pluribus Unum
error loading pdf images
I am running Mac OS 10.3.5 and LyX 1.3.5. I get an error when I try to incorporate a pdf image into a LyX file. In place of the image it states "Error converting to loadable format." The error message I get when trying to convert to postscript reads "LaTeX Error: File `/tmp/lyx_tmpdir10732GLmAp/lyx_tmpbuf0/_Users_Hank_Document ..._Users_Hank_Documents_671_Classes_Rplots} I could not locate the file with any of these extensions: .eps,.ps,.eps.gz,.ps.gz,.eps.Z Try typingto proceed. If that doesn't work, type X to quit. I don't know how to get LyX to load pdf images. (It seems to work fine on another Mac machine - my laptop). Any thought would be very appreciated. TIA, Hank Dr. Martin Henry H. Stevens, Assistant Professor 338 Pearson Hall Botany Department Miami University Oxford, OH 45056 Office: (513) 529-4206 Lab: (513) 529-4262 FAX: (513) 529-4243 http://www.cas.muohio.edu/botany/bot/henry.html http://www.muohio.edu/ecology/ http://www.muohio.edu/botany/ "E Pluribus Unum"
Re: letter with letterhead .bmp
On Tuesday 04 November 2003 06:11 pm, tarvydas wrote: I'm trying to create a letter which includes a letterhead logo in the upper left hand corner and I would like to add an address to the logo. Any pointers? Although I am a newbie also, I have a nice, flexible LyX letterhead. I suggest you skip the letter class because only a guru can customize it. Letter class was apparently designed to allow one to quickly change the mailing address and salutation when sending the same letter to many different people. It was not designed for an office that needs the ability to change the elements of the letter. Try the article class and start with a blank. Put your fancy stuff at the top. Then you can try the right address and address environments, which are included in the article class, for your addresses. I think these are the aspects of the letter class that are of the greatest utility for most users. (The right address environment is especially clever.) Next you can add your own salutation, text area, closing, cc, P.S., etc. and make the form into a template. With this template it should be relatively easy to add ad hoc stuff you need from time to time about reference numbers, mailing instructions, and the like. One thing about the letter class that we are supposed to love is the automatic provision of the date. With the article class, you will have to provide your own date. But in my shop, I want my dates to stay put. Good luck! Hank McFadyen in Dallas, TX
Re: letter with letterhead .bmp
On Tuesday 04 November 2003 06:11 pm, tarvydas wrote: I'm trying to create a letter which includes a letterhead logo in the upper left hand corner and I would like to add an address to the logo. Any pointers? Although I am a newbie also, I have a nice, flexible LyX letterhead. I suggest you skip the letter class because only a guru can customize it. Letter class was apparently designed to allow one to quickly change the mailing address and salutation when sending the same letter to many different people. It was not designed for an office that needs the ability to change the elements of the letter. Try the article class and start with a blank. Put your fancy stuff at the top. Then you can try the right address and address environments, which are included in the article class, for your addresses. I think these are the aspects of the letter class that are of the greatest utility for most users. (The right address environment is especially clever.) Next you can add your own salutation, text area, closing, cc, P.S., etc. and make the form into a template. With this template it should be relatively easy to add ad hoc stuff you need from time to time about reference numbers, mailing instructions, and the like. One thing about the letter class that we are supposed to love is the automatic provision of the date. With the article class, you will have to provide your own date. But in my shop, I want my dates to stay put. Good luck! Hank McFadyen in Dallas, TX
Re: letter with letterhead .bmp
On Tuesday 04 November 2003 06:11 pm, tarvydas wrote: "I'm trying to create a letter which includes a letterhead logo in the upper left hand corner and I would like to add an address to the logo. Any pointers?" Although I am a newbie also, I have a nice, flexible LyX letterhead. I suggest you skip the letter class because only a guru can customize it. Letter class was apparently designed to allow one to quickly change the mailing address and salutation when sending the same letter to many different people. It was not designed for an office that needs the ability to change the elements of the letter. Try the article class and start with a blank. Put your fancy stuff at the top. Then you can try the right address and address environments, which are included in the article class, for your addresses. I think these are the aspects of the letter class that are of the greatest utility for most users. (The right address environment is especially clever.) Next you can add your own salutation, text area, closing, cc, P.S., etc. and make the form into a template. With this template it should be relatively easy to add ad hoc stuff you need from time to time about reference numbers, mailing instructions, and the like. One thing about the letter class that we are supposed to love is the automatic provision of the date. With the article class, you will have to provide your own date. But in my shop, I want my dates to stay put. Good luck! Hank McFadyen in Dallas, TX
Re: Cygwin Lyx 1.3.1 crash
Thanks a lot Uwe. Installing the fonts fixed the problem. I figured I should let people know for future reference. -Henry Uwe Stöhr wrote: I've been using this the Cygwin port of Lyx 1.3.1 with XFree86 for some time now and it has been working fairly well. ( http://wwwserv1.rz.fh-hannover.de/mbau/tim/hentschel/lyx/ ) Recently, I wanted installed a few new components to my Cygwin system and I it updated me to XFree86 4.3. That's when the trouble began, and the Cygwin setup program no longer offers the old version 4.2. Also XFig requires the new 4.3 version. There should be a directory on your computer where all packages you've downloaded for cygwin are saved. Try to reinstall the old version XFree86 4.2, but I assume that you need to reinstall the whole Cygwin again. Because upgrading to version 4.3 and xfig worked fine on my win2000 machine. I've had some troubles with cygwin in the past and the only solution was to kill cygwin including the registry entries (but be careful). Basically, Lyx crashes whenever it tries to display a math character such as \pi . The message it gives is Another reason for your problem could be the fonts. Assure that you use the actual fonts in your directory xfonts. The fonts can be downloaded from http://www.fkurth.de/uwest/LyX/fonts.zip Extract the file and copy the fonts to your .lyx\..\xfonts and /or cygwin\..\xfonts directory. Now reconfigure LyX. But attention LyX kills these fonts while reconfiguring, so that you have to add them again to the xfonts directories. And here another hint: Do not install the version 0.12.x of the package libintl2. When you use internationalized menues in LyX this could be a problem. Try to reinstall the old version 0.11.x. That's all I can help you. regards uwe
Re: Cygwin Lyx 1.3.1 crash
Thanks a lot Uwe. Installing the fonts fixed the problem. I figured I should let people know for future reference. -Henry Uwe Stöhr wrote: I've been using this the Cygwin port of Lyx 1.3.1 with XFree86 for some time now and it has been working fairly well. ( http://wwwserv1.rz.fh-hannover.de/mbau/tim/hentschel/lyx/ ) Recently, I wanted installed a few new components to my Cygwin system and I it updated me to XFree86 4.3. That's when the trouble began, and the Cygwin setup program no longer offers the old version 4.2. Also XFig requires the new 4.3 version. There should be a directory on your computer where all packages you've downloaded for cygwin are saved. Try to reinstall the old version XFree86 4.2, but I assume that you need to reinstall the whole Cygwin again. Because upgrading to version 4.3 and xfig worked fine on my win2000 machine. I've had some troubles with cygwin in the past and the only solution was to kill cygwin including the registry entries (but be careful). Basically, Lyx crashes whenever it tries to display a math character such as \pi . The message it gives is Another reason for your problem could be the fonts. Assure that you use the actual fonts in your directory xfonts. The fonts can be downloaded from http://www.fkurth.de/uwest/LyX/fonts.zip Extract the file and copy the fonts to your .lyx\..\xfonts and /or cygwin\..\xfonts directory. Now reconfigure LyX. But attention LyX kills these fonts while reconfiguring, so that you have to add them again to the xfonts directories. And here another hint: Do not install the version 0.12.x of the package libintl2. When you use internationalized menues in LyX this could be a problem. Try to reinstall the old version 0.11.x. That's all I can help you. regards uwe
Re: Cygwin Lyx 1.3.1 crash
Thanks a lot Uwe. Installing the fonts fixed the problem. I figured I should let people know for future reference. -Henry Uwe Stöhr wrote: I've been using this the Cygwin port of Lyx 1.3.1 with XFree86 for some time now and it has been working fairly well. ( http://wwwserv1.rz.fh-hannover.de/mbau/tim/hentschel/lyx/ ) Recently, I wanted installed a few new components to my Cygwin system and I it updated me to XFree86 4.3. That's when the trouble began, and the Cygwin setup program no longer offers the old version 4.2. Also XFig requires the new 4.3 version. There should be a directory on your computer where all packages you've downloaded for cygwin are saved. Try to reinstall the old version XFree86 4.2, but I assume that you need to reinstall the whole Cygwin again. Because upgrading to version 4.3 and xfig worked fine on my win2000 machine. I've had some troubles with cygwin in the past and the only solution was to kill cygwin including the registry entries (but be careful). Basically, Lyx crashes whenever it tries to display a math character such as \pi . The message it gives is Another reason for your problem could be the fonts. Assure that you use the actual fonts in your directory "xfonts". The fonts can be downloaded from http://www.fkurth.de/uwest/LyX/fonts.zip Extract the file and copy the fonts to your .lyx\..\xfonts and /or cygwin\..\xfonts directory. Now reconfigure LyX. But attention LyX kills these fonts while reconfiguring, so that you have to add them again to the "xfonts" directories. And here another hint: Do not install the version 0.12.x of the package libintl2. When you use internationalized menues in LyX this could be a problem. Try to reinstall the old version 0.11.x. That's all I can help you. regards uwe
Cygwin Lyx 1.3.1 crash
I've been using this the Cygwin port of Lyx 1.3.1 with XFree86 for some time now and it has been working fairly well. ( http://wwwserv1.rz.fh-hannover.de/mbau/tim/hentschel/lyx/ ) Recently, I wanted installed a few new components to my Cygwin system and I it updated me to XFree86 4.3. That's when the trouble began, and the Cygwin setup program no longer offers the old version 4.2. Also XFig requires the new 4.3 version. Basically, Lyx crashes whenever it tries to display a math character such as \pi . The message it gives is BadValue (integer parameter out of range for operation) id: 8388792 This could be a very simple font or setup problem, but I've tried resinatlling everything multiple times in different orders to no avail. I've also tried turning all dbg levels from 5-10 and that's still the only message I get. Does this sound familar to anyone and/or give a hint where the problem is? I've included the file generating by cygcheck -s just in case that helps. Thanks, Henry Pfister Cygwin Win95/NT Configuration Diagnostics Current System Time: Wed Oct 22 10:00:11 2003 Windows 2000 Professional Ver 5.0 Build 2195 Path: C:\cygwin\usr\local\bin C:\cygwin\bin C:\cygwin\bin C:\cygwin\usr\X11R6\bin c:\program files\imagemagick-5.5.7-q16 c:\texmf\miktex\bin c:\PROGRA~1\Borland\CBUILD~1\Bin c:\PROGRA~1\Borland\CBUILD~1\Projects\Bpl c:\WINNT\system32 c:\WINNT c:\WINNT\System32\Wbem c:\matlab6r12\bin\win32 c:\Program Files\Panda Software\Panda Antivirus Titanium Output from C:\cygwin\bin\id.exe (nontsec) UID: 500(Administrator) GID: 513(None) 513(None) Output from C:\cygwin\bin\id.exe (ntsec) UID: 500(Administrator) GID: 513(None) 513(None) 544(Administrators) 545(Users) SysDir: C:\WINNT\System32 WinDir: C:\WINNT HOME = `C:\cygwin\home\Administrator' MAKE_MODE = `unix' PWD = `/home/Administrator' USER = `Administrator' Use `-r' to scan registry a: fd N/AN/A c: hd FAT32 31361Mb 86% CPUN d: cd N/AN/A e: cd N/AN/A C:\cygwin / system binmode C:\cygwin/bin /usr/bin system binmode C:\cygwin/lib /usr/lib system binmode C:\cygwin\usr\X11R6\lib\X11\fonts /usr/X11R6/lib/X11/fonts system binmode . /cygdrive system binmode,cygdrive Found: C:\cygwin\bin\awk.exe Found: C:\cygwin\bin\bash.exe Found: C:\cygwin\bin\cat.exe Found: C:\cygwin\bin\cp.exe Found: C:\cygwin\bin\cpp.exe Found: C:\cygwin\bin\find.exe Found: C:\cygwin\bin\gcc.exe Not Found: gdb Found: C:\cygwin\bin\grep.exe Found: C:\cygwin\bin\ld.exe Found: C:\cygwin\bin\ls.exe Found: C:\cygwin\bin\make.exe Found: C:\cygwin\bin\mv.exe Found: C:\cygwin\bin\rm.exe Found: C:\cygwin\bin\sed.exe Found: C:\cygwin\bin\sh.exe Found: C:\cygwin\bin\tar.exe 22k 2003/10/17 C:\cygwin\bin\cygcygipc-2.dll 132k 2003/07/12 C:\cygwin\bin\cygexpat-0.dll 48k 2003/08/10 C:\cygwin\bin\cygjbig1.dll 802k 2003/09/15 C:\cygwin\bin\cygaspell-15.dll 380k 2002/07/24 C:\cygwin\bin\cygdb-3.1.dll 487k 2002/07/24 C:\cygwin\bin\cygdb_cxx-3.1.dll 19k 2003/03/22 C:\cygwin\bin\cyggdbm.dll 28k 2003/07/20 C:\cygwin\bin\cyggdbm-3.dll 15k 2003/07/20 C:\cygwin\bin\cyggdbm_compat-3.dll 30k 2003/08/11 C:\cygwin\bin\cyggdbm-4.dll 15k 2003/08/11 C:\cygwin\bin\cyggdbm_compat-4.dll 12k 2003/08/10 C:\cygwin\bin\cyggettextpo-0.dll 69k 2003/08/10 C:\cygwin\bin\cyggettextlib-0-12-1.dll 134k 2003/08/10 C:\cygwin\bin\cyggettextsrc-0-12-1.dll 958k 2003/08/10 C:\cygwin\bin\cygiconv-2.dll 21k 2001/06/20 C:\cygwin\bin\cygintl.dll 22k 2001/12/13 C:\cygwin\bin\cygintl-1.dll 37k 2003/08/10 C:\cygwin\bin\cygintl-2.dll 132k 2003/08/11 C:\cygwin\bin\cygjpeg-62.dll 119k 2002/02/09 C:\cygwin\bin\cygjpeg6b.dll 45k 2001/04/25 C:\cygwin\bin\cygform5.dll 26k 2001/04/25 C:\cygwin\bin\cygmenu5.dll 156k 2001/04/25 C:\cygwin\bin\cygncurses++5.dll 226k 2001/04/25 C:\cygwin\bin\cygncurses5.dll 15k 2001/04/25 C:\cygwin\bin\cygpanel5.dll 35k 2002/01/09 C:\cygwin\bin\cygform6.dll 20k 2002/01/09 C:\cygwin\bin\cygmenu6.dll 175k 2002/01/09 C:\cygwin\bin\cygncurses++6.dll 202k 2002/01/09 C:\cygwin\bin\cygncurses6.dll 12k 2002/01/09 C:\cygwin\bin\cygpanel6.dll 48k 2003/08/09 C:\cygwin\bin\cygform7.dll 29k 2003/08/09 C:\cygwin\bin\cygmenu7.dll 224k 2003/08/09 C:\cygwin\bin\cygncurses7.dll 19k 2003/08/09 C:\cygwin\bin\cygpanel7.dll 63k 2003/04/11 C:\cygwin\bin\cygpcre.dll 61k 2003/04/11 C:\cygwin\bin\cygpcreposix.dll 67k 2003/09/10 C:\cygwin\bin\cygpcre-0.dll 15k 2003/09/10 C:\cygwin\bin\cygpcreposix-0.dll 173k 2003/08/10 C:\cygwin\bin\cygpng12.dll 170k 2002/01/21 C:\cygwin\bin\cygpng2.dll 22k 2002/06/09 C:\cygwin\bin
Re: Lyx for Win32, troubleshooting, Results
John Levon wrote: QT 2.3 was the only version released with a free licence. Of course, if you and other Win32 users were to chip in and buy LyX a commercial Win32 Qt licence... Isn't the LyX founder Matthias Ettrich able to underwrite a QT3 licence? I heared he's working for Trolltech. Given that (unfortunately) technically the resulting product is illegal, I can't see that happening. Could you explain this to me? Right now, Lyx is compatible with the Qt toolkit for unix (which is under the GPL). What prevents a single Lyx developer from buying the single user windows Qt toolkit from Trolltech for $1500, and compiling and releasing (not selling) the resulting binary? If the Qt library is so portable, the necessary changes for cygwin compatibility should be minor and could be incorporated into the main source tree. Then the Lyx Qt developer might have very little work besides compiling each new release. It sounds like there are legal issues in the way, but I think it might be possible to raise the $1500 from Lyx users otherwise. -Henry
Cygwin Lyx 1.3.1 crash
I've been using this the Cygwin port of Lyx 1.3.1 with XFree86 for some time now and it has been working fairly well. ( http://wwwserv1.rz.fh-hannover.de/mbau/tim/hentschel/lyx/ ) Recently, I wanted installed a few new components to my Cygwin system and I it updated me to XFree86 4.3. That's when the trouble began, and the Cygwin setup program no longer offers the old version 4.2. Also XFig requires the new 4.3 version. Basically, Lyx crashes whenever it tries to display a math character such as \pi . The message it gives is BadValue (integer parameter out of range for operation) id: 8388792 This could be a very simple font or setup problem, but I've tried resinatlling everything multiple times in different orders to no avail. I've also tried turning all dbg levels from 5-10 and that's still the only message I get. Does this sound familar to anyone and/or give a hint where the problem is? I've included the file generating by cygcheck -s just in case that helps. Thanks, Henry Pfister Cygwin Win95/NT Configuration Diagnostics Current System Time: Wed Oct 22 10:00:11 2003 Windows 2000 Professional Ver 5.0 Build 2195 Path: C:\cygwin\usr\local\bin C:\cygwin\bin C:\cygwin\bin C:\cygwin\usr\X11R6\bin c:\program files\imagemagick-5.5.7-q16 c:\texmf\miktex\bin c:\PROGRA~1\Borland\CBUILD~1\Bin c:\PROGRA~1\Borland\CBUILD~1\Projects\Bpl c:\WINNT\system32 c:\WINNT c:\WINNT\System32\Wbem c:\matlab6r12\bin\win32 c:\Program Files\Panda Software\Panda Antivirus Titanium Output from C:\cygwin\bin\id.exe (nontsec) UID: 500(Administrator) GID: 513(None) 513(None) Output from C:\cygwin\bin\id.exe (ntsec) UID: 500(Administrator) GID: 513(None) 513(None) 544(Administrators) 545(Users) SysDir: C:\WINNT\System32 WinDir: C:\WINNT HOME = `C:\cygwin\home\Administrator' MAKE_MODE = `unix' PWD = `/home/Administrator' USER = `Administrator' Use `-r' to scan registry a: fd N/AN/A c: hd FAT32 31361Mb 86% CPUN d: cd N/AN/A e: cd N/AN/A C:\cygwin / system binmode C:\cygwin/bin /usr/bin system binmode C:\cygwin/lib /usr/lib system binmode C:\cygwin\usr\X11R6\lib\X11\fonts /usr/X11R6/lib/X11/fonts system binmode . /cygdrive system binmode,cygdrive Found: C:\cygwin\bin\awk.exe Found: C:\cygwin\bin\bash.exe Found: C:\cygwin\bin\cat.exe Found: C:\cygwin\bin\cp.exe Found: C:\cygwin\bin\cpp.exe Found: C:\cygwin\bin\find.exe Found: C:\cygwin\bin\gcc.exe Not Found: gdb Found: C:\cygwin\bin\grep.exe Found: C:\cygwin\bin\ld.exe Found: C:\cygwin\bin\ls.exe Found: C:\cygwin\bin\make.exe Found: C:\cygwin\bin\mv.exe Found: C:\cygwin\bin\rm.exe Found: C:\cygwin\bin\sed.exe Found: C:\cygwin\bin\sh.exe Found: C:\cygwin\bin\tar.exe 22k 2003/10/17 C:\cygwin\bin\cygcygipc-2.dll 132k 2003/07/12 C:\cygwin\bin\cygexpat-0.dll 48k 2003/08/10 C:\cygwin\bin\cygjbig1.dll 802k 2003/09/15 C:\cygwin\bin\cygaspell-15.dll 380k 2002/07/24 C:\cygwin\bin\cygdb-3.1.dll 487k 2002/07/24 C:\cygwin\bin\cygdb_cxx-3.1.dll 19k 2003/03/22 C:\cygwin\bin\cyggdbm.dll 28k 2003/07/20 C:\cygwin\bin\cyggdbm-3.dll 15k 2003/07/20 C:\cygwin\bin\cyggdbm_compat-3.dll 30k 2003/08/11 C:\cygwin\bin\cyggdbm-4.dll 15k 2003/08/11 C:\cygwin\bin\cyggdbm_compat-4.dll 12k 2003/08/10 C:\cygwin\bin\cyggettextpo-0.dll 69k 2003/08/10 C:\cygwin\bin\cyggettextlib-0-12-1.dll 134k 2003/08/10 C:\cygwin\bin\cyggettextsrc-0-12-1.dll 958k 2003/08/10 C:\cygwin\bin\cygiconv-2.dll 21k 2001/06/20 C:\cygwin\bin\cygintl.dll 22k 2001/12/13 C:\cygwin\bin\cygintl-1.dll 37k 2003/08/10 C:\cygwin\bin\cygintl-2.dll 132k 2003/08/11 C:\cygwin\bin\cygjpeg-62.dll 119k 2002/02/09 C:\cygwin\bin\cygjpeg6b.dll 45k 2001/04/25 C:\cygwin\bin\cygform5.dll 26k 2001/04/25 C:\cygwin\bin\cygmenu5.dll 156k 2001/04/25 C:\cygwin\bin\cygncurses++5.dll 226k 2001/04/25 C:\cygwin\bin\cygncurses5.dll 15k 2001/04/25 C:\cygwin\bin\cygpanel5.dll 35k 2002/01/09 C:\cygwin\bin\cygform6.dll 20k 2002/01/09 C:\cygwin\bin\cygmenu6.dll 175k 2002/01/09 C:\cygwin\bin\cygncurses++6.dll 202k 2002/01/09 C:\cygwin\bin\cygncurses6.dll 12k 2002/01/09 C:\cygwin\bin\cygpanel6.dll 48k 2003/08/09 C:\cygwin\bin\cygform7.dll 29k 2003/08/09 C:\cygwin\bin\cygmenu7.dll 224k 2003/08/09 C:\cygwin\bin\cygncurses7.dll 19k 2003/08/09 C:\cygwin\bin\cygpanel7.dll 63k 2003/04/11 C:\cygwin\bin\cygpcre.dll 61k 2003/04/11 C:\cygwin\bin\cygpcreposix.dll 67k 2003/09/10 C:\cygwin\bin\cygpcre-0.dll 15k 2003/09/10 C:\cygwin\bin\cygpcreposix-0.dll 173k 2003/08/10 C:\cygwin\bin\cygpng12.dll 170k 2002/01/21 C:\cygwin\bin\cygpng2.dll 22k 2002/06/09 C:\cygwin\bin
Re: Lyx for Win32, troubleshooting, Results
John Levon wrote: QT 2.3 was the only version released with a free licence. Of course, if you and other Win32 users were to chip in and buy LyX a commercial Win32 Qt licence... Isn't the LyX founder Matthias Ettrich able to underwrite a QT3 licence? I heared he's working for Trolltech. Given that (unfortunately) technically the resulting product is illegal, I can't see that happening. Could you explain this to me? Right now, Lyx is compatible with the Qt toolkit for unix (which is under the GPL). What prevents a single Lyx developer from buying the single user windows Qt toolkit from Trolltech for $1500, and compiling and releasing (not selling) the resulting binary? If the Qt library is so portable, the necessary changes for cygwin compatibility should be minor and could be incorporated into the main source tree. Then the Lyx Qt developer might have very little work besides compiling each new release. It sounds like there are legal issues in the way, but I think it might be possible to raise the $1500 from Lyx users otherwise. -Henry
Cygwin Lyx 1.3.1 crash
I've been using this the Cygwin port of Lyx 1.3.1 with XFree86 for some time now and it has been working fairly well. ( http://wwwserv1.rz.fh-hannover.de/mbau/tim/hentschel/lyx/ ) Recently, I wanted installed a few new components to my Cygwin system and I it updated me to XFree86 4.3. That's when the trouble began, and the Cygwin setup program no longer offers the old version 4.2. Also XFig requires the new 4.3 version. Basically, Lyx crashes whenever it tries to display a math character such as \pi . The message it gives is BadValue (integer parameter out of range for operation) id: 8388792 This could be a very simple font or setup problem, but I've tried resinatlling everything multiple times in different orders to no avail. I've also tried turning all dbg levels from 5-10 and that's still the only message I get. Does this sound familar to anyone and/or give a hint where the problem is? I've included the file generating by "cygcheck -s" just in case that helps. Thanks, Henry Pfister Cygwin Win95/NT Configuration Diagnostics Current System Time: Wed Oct 22 10:00:11 2003 Windows 2000 Professional Ver 5.0 Build 2195 Path: C:\cygwin\usr\local\bin C:\cygwin\bin C:\cygwin\bin C:\cygwin\usr\X11R6\bin c:\program files\imagemagick-5.5.7-q16 c:\texmf\miktex\bin c:\PROGRA~1\Borland\CBUILD~1\Bin c:\PROGRA~1\Borland\CBUILD~1\Projects\Bpl c:\WINNT\system32 c:\WINNT c:\WINNT\System32\Wbem c:\matlab6r12\bin\win32 c:\Program Files\Panda Software\Panda Antivirus Titanium Output from C:\cygwin\bin\id.exe (nontsec) UID: 500(Administrator) GID: 513(None) 513(None) Output from C:\cygwin\bin\id.exe (ntsec) UID: 500(Administrator) GID: 513(None) 513(None) 544(Administrators) 545(Users) SysDir: C:\WINNT\System32 WinDir: C:\WINNT HOME = `C:\cygwin\home\Administrator' MAKE_MODE = `unix' PWD = `/home/Administrator' USER = `Administrator' Use `-r' to scan registry a: fd N/AN/A c: hd FAT32 31361Mb 86% CPUN d: cd N/AN/A e: cd N/AN/A C:\cygwin / system binmode C:\cygwin/bin /usr/bin system binmode C:\cygwin/lib /usr/lib system binmode C:\cygwin\usr\X11R6\lib\X11\fonts /usr/X11R6/lib/X11/fonts system binmode . /cygdrive system binmode,cygdrive Found: C:\cygwin\bin\awk.exe Found: C:\cygwin\bin\bash.exe Found: C:\cygwin\bin\cat.exe Found: C:\cygwin\bin\cp.exe Found: C:\cygwin\bin\cpp.exe Found: C:\cygwin\bin\find.exe Found: C:\cygwin\bin\gcc.exe Not Found: gdb Found: C:\cygwin\bin\grep.exe Found: C:\cygwin\bin\ld.exe Found: C:\cygwin\bin\ls.exe Found: C:\cygwin\bin\make.exe Found: C:\cygwin\bin\mv.exe Found: C:\cygwin\bin\rm.exe Found: C:\cygwin\bin\sed.exe Found: C:\cygwin\bin\sh.exe Found: C:\cygwin\bin\tar.exe 22k 2003/10/17 C:\cygwin\bin\cygcygipc-2.dll 132k 2003/07/12 C:\cygwin\bin\cygexpat-0.dll 48k 2003/08/10 C:\cygwin\bin\cygjbig1.dll 802k 2003/09/15 C:\cygwin\bin\cygaspell-15.dll 380k 2002/07/24 C:\cygwin\bin\cygdb-3.1.dll 487k 2002/07/24 C:\cygwin\bin\cygdb_cxx-3.1.dll 19k 2003/03/22 C:\cygwin\bin\cyggdbm.dll 28k 2003/07/20 C:\cygwin\bin\cyggdbm-3.dll 15k 2003/07/20 C:\cygwin\bin\cyggdbm_compat-3.dll 30k 2003/08/11 C:\cygwin\bin\cyggdbm-4.dll 15k 2003/08/11 C:\cygwin\bin\cyggdbm_compat-4.dll 12k 2003/08/10 C:\cygwin\bin\cyggettextpo-0.dll 69k 2003/08/10 C:\cygwin\bin\cyggettextlib-0-12-1.dll 134k 2003/08/10 C:\cygwin\bin\cyggettextsrc-0-12-1.dll 958k 2003/08/10 C:\cygwin\bin\cygiconv-2.dll 21k 2001/06/20 C:\cygwin\bin\cygintl.dll 22k 2001/12/13 C:\cygwin\bin\cygintl-1.dll 37k 2003/08/10 C:\cygwin\bin\cygintl-2.dll 132k 2003/08/11 C:\cygwin\bin\cygjpeg-62.dll 119k 2002/02/09 C:\cygwin\bin\cygjpeg6b.dll 45k 2001/04/25 C:\cygwin\bin\cygform5.dll 26k 2001/04/25 C:\cygwin\bin\cygmenu5.dll 156k 2001/04/25 C:\cygwin\bin\cygncurses++5.dll 226k 2001/04/25 C:\cygwin\bin\cygncurses5.dll 15k 2001/04/25 C:\cygwin\bin\cygpanel5.dll 35k 2002/01/09 C:\cygwin\bin\cygform6.dll 20k 2002/01/09 C:\cygwin\bin\cygmenu6.dll 175k 2002/01/09 C:\cygwin\bin\cygncurses++6.dll 202k 2002/01/09 C:\cygwin\bin\cygncurses6.dll 12k 2002/01/09 C:\cygwin\bin\cygpanel6.dll 48k 2003/08/09 C:\cygwin\bin\cygform7.dll 29k 2003/08/09 C:\cygwin\bin\cygmenu7.dll 224k 2003/08/09 C:\cygwin\bin\cygncurses7.dll 19k 2003/08/09 C:\cygwin\bin\cygpanel7.dll 63k 2003/04/11 C:\cygwin\bin\cygpcre.dll 61k 2003/04/11 C:\cygwin\bin\cygpcreposix.dll 67k 2003/09/10 C:\cygwin\bin\cygpcre-0.dll 15k 2003/09/10 C:\cygwin\bin\cygpcreposix-0.dll 173k 2003/08/10 C:\cygwin\bin\cygpng12.dll 170k 2002/01/21 C:\cygwin\bin\cygpng2.dll 22k 2002/06/09 C:\
Re: Lyx for Win32, troubleshooting, Results
John Levon wrote: QT 2.3 was the only version released with a free licence. Of course, if you and other Win32 users were to chip in and buy LyX a commercial Win32 Qt licence... Isn't the LyX founder Matthias Ettrich able to underwrite a QT3 licence? I heared he's working for Trolltech. Given that (unfortunately) technically the resulting product is illegal, I can't see that happening. Could you explain this to me? Right now, Lyx is compatible with the Qt toolkit for unix (which is under the GPL). What prevents a single Lyx developer from buying the single user windows Qt toolkit from Trolltech for $1500, and compiling and releasing (not selling) the resulting binary? If the Qt library is so portable, the necessary changes for cygwin compatibility should be minor and could be incorporated into the main source tree. Then the "Lyx Qt" developer might have very little work besides compiling each new release. It sounds like there are legal issues in the way, but I think it might be possible to raise the $1500 from Lyx users otherwise. -Henry
Compile 1.2.1 errors under YellowDog Linux 2.3?
Hi, I'm trying to get 1.2.1 compiled under my system, which is Yellowdog Linux (v2.3, a Redhat-based PPC distro). After a straight ./configure I have: Configuration Host type: powerpc-unknown-linux-gnu Special build flags:included-libsigc xforms-image-loader C Compiler: gcc C Compiler flags: -g -O2 C++ Compiler: g++ (2.95.4) C++ Compiler flags: -O -fno-exceptions Linker flags: Frontend: xforms libXpm version: 4.11 libforms version: 0.89.0 LyX binary dir: /usr/local/bin LyX files dir: /usr/local/share/lyx when compiling the frontends/xforms dir, I get make[5]: Entering directory `/home/leinhos/src/lyx-1.2.1/src/frontends/xforms' source='xformsGImage.C' object='xformsGImage.lo' libtool=yes \ depfile='.deps/xformsGImage.Plo' tmpdepfile='.deps/xformsGImage.TPlo' \ depmode=gcc /bin/sh ../../../config/depcomp \ /bin/sh ../../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../images -I../../../src/ -I../../../src/frontends/ -I../../../src/frontends/controllers -I../../.. -I../../../boost -isystem /usr/X11R6/include -O -fno-exceptions -c -o xformsGImage.lo `test -f xformsGImage.C || echo './'`xformsGImage.C ... xformsGImage.C: In method `grfx::xformsGImage::xformsGImage(const grfx::xformsGImage )': xformsGImage.C:119: implicit declaration of function `int grfx::flimage_dup(...)' xformsGImage.C:119: assignment to `FL_IMAGE *' from `int' lacks a cast xformsGImage.C: In method `bool grfx::xformsGImage::setPixmap(const grfx::GParams )': xformsGImage.C:235: implicit declaration of function `int grfx::flimage_to_pixmap(...)' make[5]: *** [xformsGImage.lo] Error 1 I can compile 1.2.0 ok, but there seem to be things that are broken on my system Any suggestions? Thanks in advance, Henry
Compile 1.2.1 errors under YellowDog Linux 2.3?
Hi, I'm trying to get 1.2.1 compiled under my system, which is Yellowdog Linux (v2.3, a Redhat-based PPC distro). After a straight ./configure I have: Configuration Host type: powerpc-unknown-linux-gnu Special build flags:included-libsigc xforms-image-loader C Compiler: gcc C Compiler flags: -g -O2 C++ Compiler: g++ (2.95.4) C++ Compiler flags: -O -fno-exceptions Linker flags: Frontend: xforms libXpm version: 4.11 libforms version: 0.89.0 LyX binary dir: /usr/local/bin LyX files dir: /usr/local/share/lyx when compiling the frontends/xforms dir, I get make[5]: Entering directory `/home/leinhos/src/lyx-1.2.1/src/frontends/xforms' source='xformsGImage.C' object='xformsGImage.lo' libtool=yes \ depfile='.deps/xformsGImage.Plo' tmpdepfile='.deps/xformsGImage.TPlo' \ depmode=gcc /bin/sh ../../../config/depcomp \ /bin/sh ../../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../images -I../../../src/ -I../../../src/frontends/ -I../../../src/frontends/controllers -I../../.. -I../../../boost -isystem /usr/X11R6/include -O -fno-exceptions -c -o xformsGImage.lo `test -f xformsGImage.C || echo './'`xformsGImage.C ... xformsGImage.C: In method `grfx::xformsGImage::xformsGImage(const grfx::xformsGImage )': xformsGImage.C:119: implicit declaration of function `int grfx::flimage_dup(...)' xformsGImage.C:119: assignment to `FL_IMAGE *' from `int' lacks a cast xformsGImage.C: In method `bool grfx::xformsGImage::setPixmap(const grfx::GParams )': xformsGImage.C:235: implicit declaration of function `int grfx::flimage_to_pixmap(...)' make[5]: *** [xformsGImage.lo] Error 1 I can compile 1.2.0 ok, but there seem to be things that are broken on my system Any suggestions? Thanks in advance, Henry
Compile 1.2.1 errors under YellowDog Linux 2.3?
Hi, I'm trying to get 1.2.1 compiled under my system, which is Yellowdog Linux (v2.3, a Redhat-based PPC distro). After a straight ./configure I have: Configuration Host type: powerpc-unknown-linux-gnu Special build flags:included-libsigc xforms-image-loader C Compiler: gcc C Compiler flags: -g -O2 C++ Compiler: g++ (2.95.4) C++ Compiler flags: -O -fno-exceptions Linker flags: Frontend: xforms libXpm version: 4.11 libforms version: 0.89.0 LyX binary dir: /usr/local/bin LyX files dir: /usr/local/share/lyx when compiling the frontends/xforms dir, I get make[5]: Entering directory `/home/leinhos/src/lyx-1.2.1/src/frontends/xforms' source='xformsGImage.C' object='xformsGImage.lo' libtool=yes \ depfile='.deps/xformsGImage.Plo' tmpdepfile='.deps/xformsGImage.TPlo' \ depmode=gcc /bin/sh ../../../config/depcomp \ /bin/sh ../../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../images -I../../../src/ -I../../../src/frontends/ -I../../../src/frontends/controllers -I../../.. -I../../../boost -isystem /usr/X11R6/include -O -fno-exceptions -c -o xformsGImage.lo `test -f xformsGImage.C || echo './'`xformsGImage.C ... xformsGImage.C: In method `grfx::xformsGImage::xformsGImage(const grfx::xformsGImage &)': xformsGImage.C:119: implicit declaration of function `int grfx::flimage_dup(...)' xformsGImage.C:119: assignment to `FL_IMAGE *' from `int' lacks a cast xformsGImage.C: In method `bool grfx::xformsGImage::setPixmap(const grfx::GParams &)': xformsGImage.C:235: implicit declaration of function `int grfx::flimage_to_pixmap(...)' make[5]: *** [xformsGImage.lo] Error 1 I can compile 1.2.0 ok, but there seem to be things that are broken on my system Any suggestions? Thanks in advance, Henry
Re: .ps from Mac in LyX
Not too sure about it as you don't say which system you are using for LyX but I guess it is Unix/Linux. If so, I suspect it is due to the different format that Mac and Unix use for text files like PS files. I guess you need to convert them to Unix format. If you have already done this, then try to look at the files in a text editor. In my experience transferring MAC RTF files to Unix systems frequently adds extraneous garbage at the beginning and end. You may have the same problem, if your file format is ok. HTH Henry Smith On Wed, 1 Sep 1999, Bill Simpson wrote: I have several .ps files created by a Mac that I want to include in a LyX document. I attach one. I ftped them over as binary, then converted tr "\r" "\n" fig1.ps fig1.ps.new to get rid of the weird mac end-of-lines. The files look OK in ghostview. HOWEVER they just create a string of errors if I try to include them in a LyX document. Does anyone have any guesses what is wrong and how to fix? My guess is that the problem has to do with the line: %%BoundingBox: ? ? ? ? But I don't know how to fix it.
Re: .ps from Mac in LyX
OOOPS Fingers faster than the eye! G Sorry 'bout that. Looked at you included file (also did not see that!) and front and end of file seem ok to me. So my suspicion is not founded, Not enough of a PS guru to be able to say anything about your bounding box idea. I suppose you could comment it out and try it or just put in some generic numbers to see what happens. Hopefully someone else can provide more info. Again sorry for being too quick onthe trigger with my first post. HTH Regards Henry
Re: .ps from Mac in LyX
Not too sure about it as you don't say which system you are using for LyX but I guess it is Unix/Linux. If so, I suspect it is due to the different format that Mac and Unix use for text files like PS files. I guess you need to convert them to Unix format. If you have already done this, then try to look at the files in a text editor. In my experience transferring MAC RTF files to Unix systems frequently adds extraneous garbage at the beginning and end. You may have the same problem, if your file format is ok. HTH Henry Smith On Wed, 1 Sep 1999, Bill Simpson wrote: I have several .ps files created by a Mac that I want to include in a LyX document. I attach one. I ftped them over as binary, then converted tr "\r" "\n" fig1.ps fig1.ps.new to get rid of the weird mac end-of-lines. The files look OK in ghostview. HOWEVER they just create a string of errors if I try to include them in a LyX document. Does anyone have any guesses what is wrong and how to fix? My guess is that the problem has to do with the line: %%BoundingBox: ? ? ? ? But I don't know how to fix it.
Re: .ps from Mac in LyX
OOOPS Fingers faster than the eye! G Sorry 'bout that. Looked at you included file (also did not see that!) and front and end of file seem ok to me. So my suspicion is not founded, Not enough of a PS guru to be able to say anything about your bounding box idea. I suppose you could comment it out and try it or just put in some generic numbers to see what happens. Hopefully someone else can provide more info. Again sorry for being too quick onthe trigger with my first post. HTH Regards Henry
Re: .ps from Mac in LyX
Not too sure about it as you don't say which system you are using for LyX but I guess it is Unix/Linux. If so, I suspect it is due to the different format that Mac and Unix use for text files like PS files. I guess you need to convert them to Unix format. If you have already done this, then try to look at the files in a text editor. In my experience transferring MAC RTF files to Unix systems frequently adds extraneous garbage at the beginning and end. You may have the same problem, if your file format is ok. HTH Henry Smith On Wed, 1 Sep 1999, Bill Simpson wrote: > I have several .ps files created by a Mac that I want to include in a LyX > document. I attach one. > > I ftped them over as binary, then converted > tr "\r" "\n" < fig1.ps > fig1.ps.new > to get rid of the weird mac end-of-lines. > > The files look OK in ghostview. HOWEVER they just create a string of > errors if I try to include them in a LyX document. Does anyone have any > guesses what is wrong and how to fix? > > My guess is that the problem has to do with the line: > %%BoundingBox: ? ? ? ? > But I don't know how to fix it.
Re: .ps from Mac in LyX
OOOPS Fingers faster than the eye! Sorry 'bout that. Looked at you included file (also did not see that!) and front and end of file seem ok to me. So my suspicion is not founded, Not enough of a PS guru to be able to say anything about your bounding box idea. I suppose you could comment it out and try it or just put in some generic numbers to see what happens. Hopefully someone else can provide more info. Again sorry for being too quick onthe trigger with my first post. HTH Regards Henry
Theorems and Conjectures
I am writing a technical paper that will have some theorems and conjectures in it. I like the standard "article" style the best, and would like to use it. But it does not support Lyx friendly Theorems and Conjectures by default. I can force it with latex parts, but it won't be WSIWYM. On the other hand, I don't like the style of "amsart" articles. But they support standard theorem and conjectures styles. I've tried editing the premable to make this style look like the standard "article", but there are many things to change. Does anybody have a standard "article" type style that includes Lyx style theorems? Is it easy to add these things to Lyx. I know how to add them to latex. Or does anybody have a style file that makes "amsart" look like "article"? Thanks for your help. -Henry Pfister
Theorems and Conjectures
I am writing a technical paper that will have some theorems and conjectures in it. I like the standard "article" style the best, and would like to use it. But it does not support Lyx friendly Theorems and Conjectures by default. I can force it with latex parts, but it won't be WSIWYM. On the other hand, I don't like the style of "amsart" articles. But they support standard theorem and conjectures styles. I've tried editing the premable to make this style look like the standard "article", but there are many things to change. Does anybody have a standard "article" type style that includes Lyx style theorems? Is it easy to add these things to Lyx. I know how to add them to latex. Or does anybody have a style file that makes "amsart" look like "article"? Thanks for your help. -Henry Pfister
Theorems and Conjectures
I am writing a technical paper that will have some theorems and conjectures in it. I like the standard "article" style the best, and would like to use it. But it does not support Lyx friendly Theorems and Conjectures by default. I can force it with latex parts, but it won't be WSIWYM. On the other hand, I don't like the style of "amsart" articles. But they support standard theorem and conjectures styles. I've tried editing the premable to make this style look like the standard "article", but there are many things to change. Does anybody have a standard "article" type style that includes Lyx style theorems? Is it easy to add these things to Lyx. I know how to add them to latex. Or does anybody have a style file that makes "amsart" look like "article"? Thanks for your help. -Henry Pfister
Re: NT port of lyx-1.0.1 startup ?
Am interested in the LyX for NT and tried to follow up the url you cited below but get no reply. Is there a typo in it? (I did try an AltaVista search with no useful results...) TIA Regards, Henry On Tue, 8 Jun 1999, Ronald Florence wrote: I'm trying to run the http://www.cs.u.nl/~stevens/lyx.html port of Lyx-1.0.1 on an ms-win-NT laptop. The lyx binary installed easily, .
Re: NT port of lyx-1.0.1 startup ?
Am interested in the LyX for NT and tried to follow up the url you cited below but get no reply. Is there a typo in it? (I did try an AltaVista search with no useful results...) TIA Regards, Henry On Tue, 8 Jun 1999, Ronald Florence wrote: I'm trying to run the http://www.cs.u.nl/~stevens/lyx.html port of Lyx-1.0.1 on an ms-win-NT laptop. The lyx binary installed easily, .
Re: NT port of lyx-1.0.1 startup ?
Am interested in the LyX for NT and tried to follow up the url you cited below but get no reply. Is there a typo in it? (I did try an AltaVista search with no useful results...) TIA Regards, Henry On Tue, 8 Jun 1999, Ronald Florence wrote: > I'm trying to run the http://www.cs.u.nl/~stevens/lyx.html port of > Lyx-1.0.1 on an ms-win-NT laptop. The lyx binary installed easily, .