Re: Figure Latex Error plus input stack size
[EMAIL PROTECTED] wrote: Thanks a lot Juergen, now the figures work fine, but I have 2 new problems: 1-it cannot read the superscript fonts (for example 10 to the -10 as superscript)it says: We need another test file then. Jürgen
Re: Figure Latex Error plus input stack size
[EMAIL PROTECTED] wrote: Thanks a lot Juergen, now the figures work fine, but I have 2 new problems: 1-it cannot read the superscript fonts (for example 10 to the -10 as superscript)it says: We need another test file then. Jürgen
Re: Figure Latex Error plus input stack size
[EMAIL PROTECTED] wrote: > Thanks a lot Juergen, now the figures work fine, but I have 2 new problems: > 1-it cannot read the superscript fonts (for example 10 to the -10 as > superscript)it says: We need another test file then. Jürgen
Re: Figure Latex error
Thanks a lot guys, all my problems are solved now ;)
Re: Figure Latex error
Thanks a lot guys, all my problems are solved now ;)
Re: Figure Latex error
Thanks a lot guys, all my problems are solved now ;)
Re: Figure Latex error
Thanks a lot Juergen and Paul for your help :)
If you do have graphicx installed (and LyX sees it), try adding
\usepackage{graphicx} to the preamble of your document and see if that
helps.
Lyx finds graphicx and I add it to the preamble, but no way. Here I
post an example of one part of the documment with an small example
figure. Probably I have everything configure in a wrong way ;(...be
patient, I am just
starting to lean this business...
Thanks again,
Mag
Graph15small.EPS
Description: PostScript document
examplenonworkingfigures.lyx
Description: application/lyx
Re: Figure Latex error
[EMAIL PROTECTED] wrote: Lyx finds graphicx and I add it to the preamble, but no way. Here I post an example of one part of the documment with an small example figure. Probably I have everything configure in a wrong way ;(...be patient, I am just starting to lean this business... You have set Document-Settings-Post Script Driver to none. Set it to default and the file will compile. Jürgen
Re: Figure Latex error
Thanks a lot Juergen and Paul for your help :)
If you do have graphicx installed (and LyX sees it), try adding
\usepackage{graphicx} to the preamble of your document and see if that
helps.
Lyx finds graphicx and I add it to the preamble, but no way. Here I
post an example of one part of the documment with an small example
figure. Probably I have everything configure in a wrong way ;(...be
patient, I am just
starting to lean this business...
Thanks again,
Mag
Graph15small.EPS
Description: PostScript document
examplenonworkingfigures.lyx
Description: application/lyx
Re: Figure Latex error
[EMAIL PROTECTED] wrote: Lyx finds graphicx and I add it to the preamble, but no way. Here I post an example of one part of the documment with an small example figure. Probably I have everything configure in a wrong way ;(...be patient, I am just starting to lean this business... You have set Document-Settings-Post Script Driver to none. Set it to default and the file will compile. Jürgen
Re: Figure Latex error
Thanks a lot Juergen and Paul for your help :) <<
Re: Figure Latex error
[EMAIL PROTECTED] wrote: > Lyx finds graphicx and I add it to the preamble, but no way. Here I > post an example of one part of the documment with an small example > figure. Probably I have everything configure in a wrong way ;(...be > patient, I am just > starting to lean this business... You have set Document->Settings->Post Script Driver to "none". Set it to "default" and the file will compile. Jürgen
Re: Figure Latex error
[EMAIL PROTECTED] wrote: Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic or a floating image, I can see it on the screen but when I try to see the dvi I get the following error: Did you insert the figure in the caption line? The figure should go in the line above. To achieve this, set the cursor in the first position of the caption (right after Figure/Abbildung) and hit return. Hi Juergen! Thanks a lot for your help. The figure is in the correct position, I did as you said, but anyhow it is not working. I always get the same errors Another idea? Thanks a lot! M.
Re: Figure Latex error
[EMAIL PROTECTED] wrote: Hi Juergen! Thanks a lot for your help. The figure is in the correct position, I did as you said, but anyhow it is not working. I always get the same errors Another idea? Please post a minimal example file to the list. Jürgen
Re: Figure Latex error
[EMAIL PROTECTED] wrote:
Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic
or a floating image, I can see it on the screen but when I try to see
the dvi I get the following error:
Undefined control sequence
\includegraphics
{0C__Archivos_de_programa_ImageMagick-6_3_2-Q16_images...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Please explain me what to do, taking into consideration I have no idea
about Latex and it´s the first time I use Lyx ;)...
Do you have the LaTeX package graphicx installed? Within LyX, open Help
- LaTeX Configuration and check section 5.4. It will tell you if LyX
found graphicx or not. If you do not have it, you need to install it
(via the MikTeX package manager, if as I suspect you are using MikTeX),
then reconfigure LyX. (I'm not sure if you'll need to restart LyX after
that, but it might not be a bad idea.)
If you do have graphicx installed (and LyX sees it), try adding
\usepackage{graphicx} to the preamble of your document and see if that
helps.
By the way, where should I save my figures..should it be on the same
diretory where the .lyx document is or could be anywhere in my computer?
They do not have to be in the same directory as the source document. It
might not be a good idea to put them in
C:\A\directory\with\a\very\long\path\to\it, though. (In fact, it's
probably not a good idea to bury *anything* that deeply.) :-)
Keep in mind that, in the event that you want to send the LyX file (or
an exported LaTeX file) to someone, or move it to another system, you
will also need to move the images. I usually keep images with the
source document just because it reduces (but not to zero) the
probability I will forget one when I send the document somewhere.
If this does not help, perhaps you could post a sample document (and
image) that fails.
Good luck,
Paul
Re: Figure Latex error
[EMAIL PROTECTED] wrote: Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic or a floating image, I can see it on the screen but when I try to see the dvi I get the following error: Did you insert the figure in the caption line? The figure should go in the line above. To achieve this, set the cursor in the first position of the caption (right after Figure/Abbildung) and hit return. Hi Juergen! Thanks a lot for your help. The figure is in the correct position, I did as you said, but anyhow it is not working. I always get the same errors Another idea? Thanks a lot! M.
Re: Figure Latex error
[EMAIL PROTECTED] wrote: Hi Juergen! Thanks a lot for your help. The figure is in the correct position, I did as you said, but anyhow it is not working. I always get the same errors Another idea? Please post a minimal example file to the list. Jürgen
Re: Figure Latex error
[EMAIL PROTECTED] wrote:
Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic
or a floating image, I can see it on the screen but when I try to see
the dvi I get the following error:
Undefined control sequence
\includegraphics
{0C__Archivos_de_programa_ImageMagick-6_3_2-Q16_images...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Please explain me what to do, taking into consideration I have no idea
about Latex and it´s the first time I use Lyx ;)...
Do you have the LaTeX package graphicx installed? Within LyX, open Help
- LaTeX Configuration and check section 5.4. It will tell you if LyX
found graphicx or not. If you do not have it, you need to install it
(via the MikTeX package manager, if as I suspect you are using MikTeX),
then reconfigure LyX. (I'm not sure if you'll need to restart LyX after
that, but it might not be a bad idea.)
If you do have graphicx installed (and LyX sees it), try adding
\usepackage{graphicx} to the preamble of your document and see if that
helps.
By the way, where should I save my figures..should it be on the same
diretory where the .lyx document is or could be anywhere in my computer?
They do not have to be in the same directory as the source document. It
might not be a good idea to put them in
C:\A\directory\with\a\very\long\path\to\it, though. (In fact, it's
probably not a good idea to bury *anything* that deeply.) :-)
Keep in mind that, in the event that you want to send the LyX file (or
an exported LaTeX file) to someone, or move it to another system, you
will also need to move the images. I usually keep images with the
source document just because it reduces (but not to zero) the
probability I will forget one when I send the document somewhere.
If this does not help, perhaps you could post a sample document (and
image) that fails.
Good luck,
Paul
Re: Figure Latex error
[EMAIL PROTECTED] wrote: Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic or a floating image, I can see it on the screen but when I try to see the dvi I get the following error: Did you insert the figure in the caption line? The figure should go in the line above. To achieve this, set the cursor in the first position of the caption (right after "Figure"/"Abbildung") and hit return. Hi Juergen! Thanks a lot for your help. The figure is in the correct position, I did as you said, but anyhow it is not working. I always get the same errors Another idea? Thanks a lot! M.
Re: Figure Latex error
[EMAIL PROTECTED] wrote: > Hi Juergen! Thanks a lot for your help. The figure is in the correct > position, I did as you said, but anyhow it is not working. I always get > the same errors > Another idea? Please post a minimal example file to the list. Jürgen
Re: Figure Latex error
[EMAIL PROTECTED] wrote:
Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic
or a floating image, I can see it on the screen but when I try to see
the dvi I get the following error:
Undefined control sequence
\includegraphics
{0C__Archivos_de_programa_ImageMagick-6_3_2-Q16_images...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Please explain me what to do, taking into consideration I have no idea
about Latex and it´s the first time I use Lyx ;)...
Do you have the LaTeX package graphicx installed? Within LyX, open Help
-> LaTeX Configuration and check section 5.4. It will tell you if LyX
found graphicx or not. If you do not have it, you need to install it
(via the MikTeX package manager, if as I suspect you are using MikTeX),
then reconfigure LyX. (I'm not sure if you'll need to restart LyX after
that, but it might not be a bad idea.)
If you do have graphicx installed (and LyX sees it), try adding
\usepackage{graphicx} to the preamble of your document and see if that
helps.
By the way, where should I save my figures..should it be on the same
diretory where the .lyx document is or could be anywhere in my computer?
They do not have to be in the same directory as the source document. It
might not be a good idea to put them in
C:\A\directory\with\a\very\long\path\to\it, though. (In fact, it's
probably not a good idea to bury *anything* that deeply.) :-)
Keep in mind that, in the event that you want to send the LyX file (or
an exported LaTeX file) to someone, or move it to another system, you
will also need to move the images. I usually keep images with the
source document just because it reduces (but not to zero) the
probability I will forget one when I send the document somewhere.
If this does not help, perhaps you could post a sample document (and
image) that fails.
Good luck,
Paul
Re: Figure Latex error
[EMAIL PROTECTED] wrote: Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic or a floating image, I can see it on the screen but when I try to see the dvi I get the following error: Did you insert the figure in the caption line? The figure should go in the line above. To achieve this, set the cursor in the first position of the caption (right after Figure/Abbildung) and hit return. By the way, where should I save my figures..should it be on the same diretory where the .lyx document is or could be anywhere in my computer? From LyX's POV, it can be anywhere. Jürgen
Re: Figure Latex error
[EMAIL PROTECTED] wrote: Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic or a floating image, I can see it on the screen but when I try to see the dvi I get the following error: Did you insert the figure in the caption line? The figure should go in the line above. To achieve this, set the cursor in the first position of the caption (right after Figure/Abbildung) and hit return. By the way, where should I save my figures..should it be on the same diretory where the .lyx document is or could be anywhere in my computer? From LyX's POV, it can be anywhere. Jürgen
Re: Figure Latex error
[EMAIL PROTECTED] wrote: > Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic > or a floating image, I can see it on the screen but when I try to see > the dvi I get the following error: Did you insert the figure in the caption line? The figure should go in the line above. To achieve this, set the cursor in the first position of the caption (right after "Figure"/"Abbildung") and hit return. > By the way, where should I save my figures..should it be on the same > diretory where the .lyx document is or could be anywhere in my computer? From LyX's POV, it can be anywhere. Jürgen
Figure Latex error
Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic
or a floating image, I can see it on the screen but when I try to see
the dvi I get the following error:
Undefined control sequence
\includegraphics
{0C__Archivos_de_programa_ImageMagick-6_3_2-Q16_images...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Please explain me what to do, taking into consideration I have no idea
about Latex and it´s the first time I use Lyx ;)...
By the way, where should I save my figures..should it be on the same
diretory where the .lyx document is or could be anywhere in my computer?
Thanks a lot!
Mag.
Figure Latex error
Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic
or a floating image, I can see it on the screen but when I try to see
the dvi I get the following error:
Undefined control sequence
\includegraphics
{0C__Archivos_de_programa_ImageMagick-6_3_2-Q16_images...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Please explain me what to do, taking into consideration I have no idea
about Latex and it´s the first time I use Lyx ;)...
By the way, where should I save my figures..should it be on the same
diretory where the .lyx document is or could be anywhere in my computer?
Thanks a lot!
Mag.
Figure Latex error
Hi! I am working with Lyx 1.4 (for windows). After inserting a graphic
or a floating image, I can see it on the screen but when I try to see
the dvi I get the following error:
Undefined control sequence
\includegraphics
{0C__Archivos_de_programa_ImageMagick-6_3_2-Q16_images...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Please explain me what to do, taking into consideration I have no idea
about Latex and it´s the first time I use Lyx ;)...
By the way, where should I save my figures..should it be on the same
diretory where the .lyx document is or could be anywhere in my computer?
Thanks a lot!
Mag.
insert figure latex error, 1.1.5fix2
Hi all. I'm using LyX version 1.1.5fix2. It was built with xforms-088
and libxpm 3.4k, on Irix 6.5. My latex uses TeX Version 3.1415 (C version
6.1).
I have EPS figures I want to put in my lyx document. When I do so with
Insert | Figure... the image is inserted and rendered in the LyX window
just fine.
When I try to build the dvi, with File | View Dvi, LyX (LaTeX) thinks a
moment then gives the two errors below. The latex build is unable to
complete. The exact same thing happens when I put the figure in the float
(which is what I want to do ultimately).
What can I do to help latex build the dvi?
I read the FAQ and user's guide (and tutorial, of course), and searched
the mail list archives - didn't find anything that seemed relvant. If you
can help me out, I'll be very grateful.
Aaron
= first error =
LaTeX Error: Unknown graphics extension: .eps.
{\par\centering\includegraphics{ffoo.eps}
\par}\vspace{0.3cm}
Try typing return to proceed.
If that doesn't work, type X return to quit.
= last error =
Package graphics Error: No driver specified.
}
You should make a default driver option in a file
graphics.cfg
eg: \ExecuteOptions{textures}
Re: insert figure latex error, 1.1.5fix2
"Aaron" == Aaron Maxwell [EMAIL PROTECTED] writes: Aaron When I try to build the dvi, with File | View Dvi, LyX (LaTeX) Aaron thinks a moment then gives the two errors below. The latex Aaron build is unable to complete. The exact same thing happens when Aaron I put the figure in the float (which is what I want to do Aaron ultimately). Aaron What can I do to help latex build the dvi? In Layout-Document, set "PS Driver" to dvips. JMarc
Re: insert figure latex error, 1.1.5fix2
It works perfectly now. Thanks, JMarc. Aaron On 24 Oct 2000, Jean-Marc Lasgouttes wrote: "Aaron" == Aaron Maxwell [EMAIL PROTECTED] writes: Aaron What can I do to help latex build the dvi? In Layout-Document, set "PS Driver" to dvips. JMarc
insert figure latex error, 1.1.5fix2
Hi all. I'm using LyX version 1.1.5fix2. It was built with xforms-088
and libxpm 3.4k, on Irix 6.5. My latex uses TeX Version 3.1415 (C version
6.1).
I have EPS figures I want to put in my lyx document. When I do so with
Insert | Figure... the image is inserted and rendered in the LyX window
just fine.
When I try to build the dvi, with File | View Dvi, LyX (LaTeX) thinks a
moment then gives the two errors below. The latex build is unable to
complete. The exact same thing happens when I put the figure in the float
(which is what I want to do ultimately).
What can I do to help latex build the dvi?
I read the FAQ and user's guide (and tutorial, of course), and searched
the mail list archives - didn't find anything that seemed relvant. If you
can help me out, I'll be very grateful.
Aaron
= first error =
LaTeX Error: Unknown graphics extension: .eps.
{\par\centering\includegraphics{ffoo.eps}
\par}\vspace{0.3cm}
Try typing return to proceed.
If that doesn't work, type X return to quit.
= last error =
Package graphics Error: No driver specified.
}
You should make a default driver option in a file
graphics.cfg
eg: \ExecuteOptions{textures}
Re: insert figure latex error, 1.1.5fix2
"Aaron" == Aaron Maxwell [EMAIL PROTECTED] writes: Aaron When I try to build the dvi, with File | View Dvi, LyX (LaTeX) Aaron thinks a moment then gives the two errors below. The latex Aaron build is unable to complete. The exact same thing happens when Aaron I put the figure in the float (which is what I want to do Aaron ultimately). Aaron What can I do to help latex build the dvi? In Layout-Document, set "PS Driver" to dvips. JMarc
Re: insert figure latex error, 1.1.5fix2
It works perfectly now. Thanks, JMarc. Aaron On 24 Oct 2000, Jean-Marc Lasgouttes wrote: "Aaron" == Aaron Maxwell [EMAIL PROTECTED] writes: Aaron What can I do to help latex build the dvi? In Layout-Document, set "PS Driver" to dvips. JMarc
insert figure latex error, 1.1.5fix2
Hi all. I'm using LyX version 1.1.5fix2. It was built with xforms-088
and libxpm 3.4k, on Irix 6.5. My latex uses TeX Version 3.1415 (C version
6.1).
I have EPS figures I want to put in my lyx document. When I do so with
Insert |> Figure... the image is inserted and rendered in the LyX window
just fine.
When I try to build the dvi, with File |> View Dvi, LyX (LaTeX) thinks a
moment then gives the two errors below. The latex build is unable to
complete. The exact same thing happens when I put the figure in the float
(which is what I want to do ultimately).
What can I do to help latex build the dvi?
I read the FAQ and user's guide (and tutorial, of course), and searched
the mail list archives - didn't find anything that seemed relvant. If you
can help me out, I'll be very grateful.
Aaron
= first error =
LaTeX Error: Unknown graphics extension: .eps.
{\par\centering\includegraphics{ffoo.eps}
\par}\vspace{0.3cm}
Try typing to proceed.
If that doesn't work, type X to quit.
= last error =
Package graphics Error: No driver specified.
}
You should make a default driver option in a file
graphics.cfg
eg: \ExecuteOptions{textures}
Re: insert figure latex error, 1.1.5fix2
> "Aaron" == Aaron Maxwell <[EMAIL PROTECTED]> writes: Aaron> When I try to build the dvi, with File |> View Dvi, LyX (LaTeX) Aaron> thinks a moment then gives the two errors below. The latex Aaron> build is unable to complete. The exact same thing happens when Aaron> I put the figure in the float (which is what I want to do Aaron> ultimately). Aaron> What can I do to help latex build the dvi? In Layout->Document, set "PS Driver" to dvips. JMarc
Re: insert figure latex error, 1.1.5fix2
It works perfectly now. Thanks, JMarc. Aaron On 24 Oct 2000, Jean-Marc Lasgouttes wrote: > > "Aaron" == Aaron Maxwell <[EMAIL PROTECTED]> writes: > Aaron> What can I do to help latex build the dvi? > > In Layout->Document, set "PS Driver" to dvips. > > JMarc >
