Re: Numbering by section showed wrong!

2011-11-27 Thread Liviu Andronic 
On Sun, Nov 27, 2011 at 8:48 AM, Kenedy Torcatt yde...@gmail.com wrote:
 yes, thankyou! here you have the file attached...

A 500KB archive is *not* a minimal lyx file reproducing the issue at
hand. The LyX list is particularly lenient when enforcing policies,
and helpful to beginners. In fact it is one of the most civilized and
helpful lists I know. But this is no reason to abuse it. Sending half
a megabyte to a public list, especially when asked several times for a
small example, is impolite. And not doing your homework erodes the
goodwill of those willing to help. On other lists---and r-help pops to
mind---you would have gotten grilled a long time ago.

As for you actual question, it is difficult to see what goes wrong
without a small example. I understand that you would like to reset
counters. One way is indeed the module, which seems to simply use
\numberwithin{table}{section} in the preamble. Or you could do it
manually. Search the wiki for 'reset counter' (there are two hits that
could be useful) and also look into Wikibooks for pointers. [1]

Regards
Liviu

[1] https://en.wikibooks.org/wiki/LaTeX/Advanced_Topics


 2011/11/27 Xu Wang xuwang...@gmail.com:
 So the numbering is correct in LyX and incorrect in the pdf? Could you
 please send your .lyx file or just a minimum working example (ie a small
 file that shows the problem)? Please send it to the list and not just me. I
 don't know much about LyX -- I'm just trying to help you ask for help in the
 best way.
 On Sun, Nov 27, 2011 at 1:19 AM, Kenedy Torcatt yde...@gmail.com wrote:

 Hey, Just wrong in pdf, i didn't notice it. That's weird! Wow, how to fix
 that?

 2011/11/27 Xu Wang xuwang...@gmail.com:
  Does it only show it wrong in LyX? Or does it also show wrong in the pdf
  output?
 
  On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt yde...@gmail.com
  wrote:
 
  Hello LyX Users...
 
  I need to show in my thesis figures and equations by sections, but LyX
  is showing them wrong. I mean I activate the module
  using: Document→Settings→Modules and add the module Number equations
  by section and the same for figures, but when
  I change a section the figures is not showing from 1 like it should,
  For example, ilustrating this:
 
  -Section 1
 
  Figure 1.1
 
  -Section 2
 
  Figure 2.2 ( I need 2.1, then 2.2, .and on)
 
  The same thing occur with equations!
  That's the problem I'm facing it...
  Please help me with this, should I add some code in the preamble?
 
  Thankyou in advance!
 
 



 --
 Kenedy Torcatt
 Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
 Contact: Gmail                                facebook: ktorcatt
               Yahoo                               Twitter: kenfitness
               Hotmail





 --
 Kenedy Torcatt
 Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
 Contact: Gmail                                facebook: ktorcatt
               Yahoo                               Twitter: kenfitness
               Hotmail




-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: Numbering by section showed wrong!

2011-11-27 Thread Liviu Andronic 
On Sun, Nov 27, 2011 at 8:48 AM, Kenedy Torcatt yde...@gmail.com wrote:
 yes, thankyou! here you have the file attached...

A 500KB archive is *not* a minimal lyx file reproducing the issue at
hand. The LyX list is particularly lenient when enforcing policies,
and helpful to beginners. In fact it is one of the most civilized and
helpful lists I know. But this is no reason to abuse it. Sending half
a megabyte to a public list, especially when asked several times for a
small example, is impolite. And not doing your homework erodes the
goodwill of those willing to help. On other lists---and r-help pops to
mind---you would have gotten grilled a long time ago.

As for you actual question, it is difficult to see what goes wrong
without a small example. I understand that you would like to reset
counters. One way is indeed the module, which seems to simply use
\numberwithin{table}{section} in the preamble. Or you could do it
manually. Search the wiki for 'reset counter' (there are two hits that
could be useful) and also look into Wikibooks for pointers. [1]

Regards
Liviu

[1] https://en.wikibooks.org/wiki/LaTeX/Advanced_Topics


 2011/11/27 Xu Wang xuwang...@gmail.com:
 So the numbering is correct in LyX and incorrect in the pdf? Could you
 please send your .lyx file or just a minimum working example (ie a small
 file that shows the problem)? Please send it to the list and not just me. I
 don't know much about LyX -- I'm just trying to help you ask for help in the
 best way.
 On Sun, Nov 27, 2011 at 1:19 AM, Kenedy Torcatt yde...@gmail.com wrote:

 Hey, Just wrong in pdf, i didn't notice it. That's weird! Wow, how to fix
 that?

 2011/11/27 Xu Wang xuwang...@gmail.com:
  Does it only show it wrong in LyX? Or does it also show wrong in the pdf
  output?
 
  On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt yde...@gmail.com
  wrote:
 
  Hello LyX Users...
 
  I need to show in my thesis figures and equations by sections, but LyX
  is showing them wrong. I mean I activate the module
  using: Document→Settings→Modules and add the module Number equations
  by section and the same for figures, but when
  I change a section the figures is not showing from 1 like it should,
  For example, ilustrating this:
 
  -Section 1
 
  Figure 1.1
 
  -Section 2
 
  Figure 2.2 ( I need 2.1, then 2.2, .and on)
 
  The same thing occur with equations!
  That's the problem I'm facing it...
  Please help me with this, should I add some code in the preamble?
 
  Thankyou in advance!
 
 



 --
 Kenedy Torcatt
 Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
 Contact: Gmail                                facebook: ktorcatt
               Yahoo                               Twitter: kenfitness
               Hotmail





 --
 Kenedy Torcatt
 Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
 Contact: Gmail                                facebook: ktorcatt
               Yahoo                               Twitter: kenfitness
               Hotmail




-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: Numbering by section showed wrong!

2011-11-27 Thread Liviu Andronic 
On Sun, Nov 27, 2011 at 8:48 AM, Kenedy Torcatt  wrote:
> yes, thankyou! here you have the file attached...
>
A 500KB archive is *not* a minimal lyx file reproducing the issue at
hand. The LyX list is particularly lenient when enforcing policies,
and helpful to beginners. In fact it is one of the most civilized and
helpful lists I know. But this is no reason to abuse it. Sending half
a megabyte to a public list, especially when asked several times for a
small example, is impolite. And not doing your homework erodes the
goodwill of those willing to help. On other lists---and r-help pops to
mind---you would have gotten grilled a long time ago.

As for you actual question, it is difficult to see what goes wrong
without a small example. I understand that you would like to reset
counters. One way is indeed the module, which seems to simply use
\numberwithin{table}{section} in the preamble. Or you could do it
manually. Search the wiki for 'reset counter' (there are two hits that
could be useful) and also look into Wikibooks for pointers. [1]

Regards
Liviu

[1] https://en.wikibooks.org/wiki/LaTeX/Advanced_Topics


> 2011/11/27 Xu Wang :
>> So the numbering is correct in LyX and incorrect in the pdf? Could you
>> please send your .lyx file or just a minimum working example (ie a small
>> file that shows the problem)? Please send it to the list and not just me. I
>> don't know much about LyX -- I'm just trying to help you ask for help in the
>> best way.
>> On Sun, Nov 27, 2011 at 1:19 AM, Kenedy Torcatt  wrote:
>>>
>>> Hey, Just wrong in pdf, i didn't notice it. That's weird! Wow, how to fix
>>> that?
>>>
>>> 2011/11/27 Xu Wang :
>>> > Does it only show it wrong in LyX? Or does it also show wrong in the pdf
>>> > output?
>>> >
>>> > On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt 
>>> > wrote:
>>> >>
>>> >> Hello LyX Users...
>>> >>
>>> >> I need to show in my thesis figures and equations by sections, but LyX
>>> >> is showing them wrong. I mean I activate the module
>>> >> using: Document→Settings→Modules and add the module "Number equations
>>> >> by section" and the same for figures, but when
>>> >> I change a section the figures is not showing from 1 like it should,
>>> >> For example, ilustrating this:
>>> >>
>>> >> -Section 1
>>> >>
>>> >> Figure 1.1
>>> >>
>>> >> -Section 2
>>> >>
>>> >> Figure 2.2 ( I need 2.1, then 2.2, .and on)
>>> >>
>>> >> The same thing occur with equations!
>>> >> That's the problem I'm facing it...
>>> >> Please help me with this, should I add some code in the preamble?
>>> >>
>>> >> Thankyou in advance!
>>> >
>>> >
>>>
>>>
>>>
>>> --
>>> Kenedy Torcatt
>>> Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
>>> Contact: Gmail                                facebook: ktorcatt
>>>               Yahoo                               Twitter: kenfitness
>>>               Hotmail
>>
>>
>
>
>
> --
> Kenedy Torcatt
> Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
> Contact: Gmail                                facebook: ktorcatt
>               Yahoo                               Twitter: kenfitness
>               Hotmail
>



-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Numbering by section showed wrong!

2011-11-26 Thread Kenedy Torcatt 
Hello LyX Users...

I need to show in my thesis figures and equations by sections, but LyX
is showing them wrong. I mean I activate the module
using: Document→Settings→Modules and add the module Number equations
by section and the same for figures, but when
I change a section the figures is not showing from 1 like it should,
For example, ilustrating this:

-Section 1

Figure 1.1

-Section 2

Figure 2.2 ( I need 2.1, then 2.2, .and on)

The same thing occur with equations!
That's the problem I'm facing it...
Please help me with this, should I add some code in the preamble?

Thankyou in advance!

Re: Numbering by section showed wrong!

2011-11-26 Thread Xu Wang 
Does it only show it wrong in LyX? Or does it also show wrong in the pdf
output?

On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt yde...@gmail.com wrote:

 Hello LyX Users...

 I need to show in my thesis figures and equations by sections, but LyX
 is showing them wrong. I mean I activate the module
 using: Document→Settings→Modules and add the module Number equations
 by section and the same for figures, but when
 I change a section the figures is not showing from 1 like it should,
 For example, ilustrating this:

 -Section 1

 Figure 1.1

 -Section 2

 Figure 2.2 ( I need 2.1, then 2.2, .and on)

 The same thing occur with equations!
 That's the problem I'm facing it...
 Please help me with this, should I add some code in the preamble?

 Thankyou in advance!

Re: Numbering by section showed wrong!

2011-11-26 Thread Xu Wang 
So the numbering is correct in LyX and incorrect in the pdf? Could you
please send your .lyx file or just a minimum working example (ie a small
file that shows the problem)? Please send it to the list and not just me. I
don't know much about LyX -- I'm just trying to help you ask for help in
the best way.

On Sun, Nov 27, 2011 at 1:19 AM, Kenedy Torcatt yde...@gmail.com wrote:

 Hey, Just wrong in pdf, i didn't notice it. That's weird! Wow, how to fix
 that?

 2011/11/27 Xu Wang xuwang...@gmail.com:
  Does it only show it wrong in LyX? Or does it also show wrong in the pdf
  output?
 
  On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt yde...@gmail.com
 wrote:
 
  Hello LyX Users...
 
  I need to show in my thesis figures and equations by sections, but LyX
  is showing them wrong. I mean I activate the module
  using: Document→Settings→Modules and add the module Number equations
  by section and the same for figures, but when
  I change a section the figures is not showing from 1 like it should,
  For example, ilustrating this:
 
  -Section 1
 
  Figure 1.1
 
  -Section 2
 
  Figure 2.2 ( I need 2.1, then 2.2, .and on)
 
  The same thing occur with equations!
  That's the problem I'm facing it...
  Please help me with this, should I add some code in the preamble?
 
  Thankyou in advance!
 
 



 --
 Kenedy Torcatt
 Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
 Contact: Gmailfacebook: ktorcatt
   Yahoo   Twitter: kenfitness
   Hotmail

Re: Numbering by section showed wrong!

2011-11-26 Thread Xu Wang 
OK great. I don't know how to solve your problem, but hopefully someone
will come along who can. It seems that you should try to improve your
question asking skills (yes, they are skills and require effort and
practice). You were given some great advice by Steve Litt:
http://www.mail-archive.com/lyx-users@lists.lyx.org/msg89979.html
Unfortunately you have either ignored or forgotten that advice. Please
study it again. I agree that .rar is not a good format to send in. Please
send in tar.gz.

You should *always* include your .lyx file (as small as possible but that
can still reproduce the problem)

Best of luck with everything!

Xu


On Sun, Nov 27, 2011 at 2:48 AM, Kenedy Torcatt yde...@gmail.com wrote:

 yes, thankyou! here you have the file attached...

 2011/11/27 Xu Wang xuwang...@gmail.com:
  So the numbering is correct in LyX and incorrect in the pdf? Could you
  please send your .lyx file or just a minimum working example (ie a small
  file that shows the problem)? Please send it to the list and not just
 me. I
  don't know much about LyX -- I'm just trying to help you ask for help in
 the
  best way.
  On Sun, Nov 27, 2011 at 1:19 AM, Kenedy Torcatt yde...@gmail.com
 wrote:
 
  Hey, Just wrong in pdf, i didn't notice it. That's weird! Wow, how to
 fix
  that?
 
  2011/11/27 Xu Wang xuwang...@gmail.com:
   Does it only show it wrong in LyX? Or does it also show wrong in the
 pdf
   output?
  
   On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt yde...@gmail.com
   wrote:
  
   Hello LyX Users...
  
   I need to show in my thesis figures and equations by sections, but
 LyX
   is showing them wrong. I mean I activate the module
   using: Document→Settings→Modules and add the module Number equations
   by section and the same for figures, but when
   I change a section the figures is not showing from 1 like it should,
   For example, ilustrating this:
  
   -Section 1
  
   Figure 1.1
  
   -Section 2
  
   Figure 2.2 ( I need 2.1, then 2.2, .and on)
  
   The same thing occur with equations!
   That's the problem I'm facing it...
   Please help me with this, should I add some code in the preamble?
  
   Thankyou in advance!
  
  
 
 
 
  --
  Kenedy Torcatt
  Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
  Contact: Gmailfacebook: ktorcatt
Yahoo   Twitter: kenfitness
Hotmail
 
 



 --
 Kenedy Torcatt
 Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
 Contact: Gmailfacebook: ktorcatt
   Yahoo   Twitter: kenfitness
   Hotmail

Numbering by section showed wrong!

2011-11-26 Thread Kenedy Torcatt 
Hello LyX Users...

I need to show in my thesis figures and equations by sections, but LyX
is showing them wrong. I mean I activate the module
using: Document→Settings→Modules and add the module Number equations
by section and the same for figures, but when
I change a section the figures is not showing from 1 like it should,
For example, ilustrating this:

-Section 1

Figure 1.1

-Section 2

Figure 2.2 ( I need 2.1, then 2.2, .and on)

The same thing occur with equations!
That's the problem I'm facing it...
Please help me with this, should I add some code in the preamble?

Thankyou in advance!

Re: Numbering by section showed wrong!

2011-11-26 Thread Xu Wang 
Does it only show it wrong in LyX? Or does it also show wrong in the pdf
output?

On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt yde...@gmail.com wrote:

 Hello LyX Users...

 I need to show in my thesis figures and equations by sections, but LyX
 is showing them wrong. I mean I activate the module
 using: Document→Settings→Modules and add the module Number equations
 by section and the same for figures, but when
 I change a section the figures is not showing from 1 like it should,
 For example, ilustrating this:

 -Section 1

 Figure 1.1

 -Section 2

 Figure 2.2 ( I need 2.1, then 2.2, .and on)

 The same thing occur with equations!
 That's the problem I'm facing it...
 Please help me with this, should I add some code in the preamble?

 Thankyou in advance!

Re: Numbering by section showed wrong!

2011-11-26 Thread Xu Wang 
So the numbering is correct in LyX and incorrect in the pdf? Could you
please send your .lyx file or just a minimum working example (ie a small
file that shows the problem)? Please send it to the list and not just me. I
don't know much about LyX -- I'm just trying to help you ask for help in
the best way.

On Sun, Nov 27, 2011 at 1:19 AM, Kenedy Torcatt yde...@gmail.com wrote:

 Hey, Just wrong in pdf, i didn't notice it. That's weird! Wow, how to fix
 that?

 2011/11/27 Xu Wang xuwang...@gmail.com:
  Does it only show it wrong in LyX? Or does it also show wrong in the pdf
  output?
 
  On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt yde...@gmail.com
 wrote:
 
  Hello LyX Users...
 
  I need to show in my thesis figures and equations by sections, but LyX
  is showing them wrong. I mean I activate the module
  using: Document→Settings→Modules and add the module Number equations
  by section and the same for figures, but when
  I change a section the figures is not showing from 1 like it should,
  For example, ilustrating this:
 
  -Section 1
 
  Figure 1.1
 
  -Section 2
 
  Figure 2.2 ( I need 2.1, then 2.2, .and on)
 
  The same thing occur with equations!
  That's the problem I'm facing it...
  Please help me with this, should I add some code in the preamble?
 
  Thankyou in advance!
 
 



 --
 Kenedy Torcatt
 Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
 Contact: Gmailfacebook: ktorcatt
   Yahoo   Twitter: kenfitness
   Hotmail

Re: Numbering by section showed wrong!

2011-11-26 Thread Xu Wang 
OK great. I don't know how to solve your problem, but hopefully someone
will come along who can. It seems that you should try to improve your
question asking skills (yes, they are skills and require effort and
practice). You were given some great advice by Steve Litt:
http://www.mail-archive.com/lyx-users@lists.lyx.org/msg89979.html
Unfortunately you have either ignored or forgotten that advice. Please
study it again. I agree that .rar is not a good format to send in. Please
send in tar.gz.

You should *always* include your .lyx file (as small as possible but that
can still reproduce the problem)

Best of luck with everything!

Xu


On Sun, Nov 27, 2011 at 2:48 AM, Kenedy Torcatt yde...@gmail.com wrote:

 yes, thankyou! here you have the file attached...

 2011/11/27 Xu Wang xuwang...@gmail.com:
  So the numbering is correct in LyX and incorrect in the pdf? Could you
  please send your .lyx file or just a minimum working example (ie a small
  file that shows the problem)? Please send it to the list and not just
 me. I
  don't know much about LyX -- I'm just trying to help you ask for help in
 the
  best way.
  On Sun, Nov 27, 2011 at 1:19 AM, Kenedy Torcatt yde...@gmail.com
 wrote:
 
  Hey, Just wrong in pdf, i didn't notice it. That's weird! Wow, how to
 fix
  that?
 
  2011/11/27 Xu Wang xuwang...@gmail.com:
   Does it only show it wrong in LyX? Or does it also show wrong in the
 pdf
   output?
  
   On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt yde...@gmail.com
   wrote:
  
   Hello LyX Users...
  
   I need to show in my thesis figures and equations by sections, but
 LyX
   is showing them wrong. I mean I activate the module
   using: Document→Settings→Modules and add the module Number equations
   by section and the same for figures, but when
   I change a section the figures is not showing from 1 like it should,
   For example, ilustrating this:
  
   -Section 1
  
   Figure 1.1
  
   -Section 2
  
   Figure 2.2 ( I need 2.1, then 2.2, .and on)
  
   The same thing occur with equations!
   That's the problem I'm facing it...
   Please help me with this, should I add some code in the preamble?
  
   Thankyou in advance!
  
  
 
 
 
  --
  Kenedy Torcatt
  Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
  Contact: Gmailfacebook: ktorcatt
Yahoo   Twitter: kenfitness
Hotmail
 
 



 --
 Kenedy Torcatt
 Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
 Contact: Gmailfacebook: ktorcatt
   Yahoo   Twitter: kenfitness
   Hotmail

Numbering by section showed wrong!

2011-11-26 Thread Kenedy Torcatt 
Hello LyX Users...

I need to show in my thesis figures and equations by sections, but LyX
is showing them wrong. I mean I activate the module
using: Document→Settings→Modules and add the module "Number equations
by section" and the same for figures, but when
I change a section the figures is not showing from 1 like it should,
For example, ilustrating this:

-Section 1

Figure 1.1

-Section 2

Figure 2.2 ( I need 2.1, then 2.2, .and on)

The same thing occur with equations!
That's the problem I'm facing it...
Please help me with this, should I add some code in the preamble?

Thankyou in advance!

Re: Numbering by section showed wrong!

2011-11-26 Thread Xu Wang 
Does it only show it wrong in LyX? Or does it also show wrong in the pdf
output?

On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt  wrote:

> Hello LyX Users...
>
> I need to show in my thesis figures and equations by sections, but LyX
> is showing them wrong. I mean I activate the module
> using: Document→Settings→Modules and add the module "Number equations
> by section" and the same for figures, but when
> I change a section the figures is not showing from 1 like it should,
> For example, ilustrating this:
>
> -Section 1
>
> Figure 1.1
>
> -Section 2
>
> Figure 2.2 ( I need 2.1, then 2.2, .and on)
>
> The same thing occur with equations!
> That's the problem I'm facing it...
> Please help me with this, should I add some code in the preamble?
>
> Thankyou in advance!
>

Re: Numbering by section showed wrong!

2011-11-26 Thread Xu Wang 
So the numbering is correct in LyX and incorrect in the pdf? Could you
please send your .lyx file or just a minimum working example (ie a small
file that shows the problem)? Please send it to the list and not just me. I
don't know much about LyX -- I'm just trying to help you ask for help in
the best way.

On Sun, Nov 27, 2011 at 1:19 AM, Kenedy Torcatt  wrote:

> Hey, Just wrong in pdf, i didn't notice it. That's weird! Wow, how to fix
> that?
>
> 2011/11/27 Xu Wang :
> > Does it only show it wrong in LyX? Or does it also show wrong in the pdf
> > output?
> >
> > On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt 
> wrote:
> >>
> >> Hello LyX Users...
> >>
> >> I need to show in my thesis figures and equations by sections, but LyX
> >> is showing them wrong. I mean I activate the module
> >> using: Document→Settings→Modules and add the module "Number equations
> >> by section" and the same for figures, but when
> >> I change a section the figures is not showing from 1 like it should,
> >> For example, ilustrating this:
> >>
> >> -Section 1
> >>
> >> Figure 1.1
> >>
> >> -Section 2
> >>
> >> Figure 2.2 ( I need 2.1, then 2.2, .and on)
> >>
> >> The same thing occur with equations!
> >> That's the problem I'm facing it...
> >> Please help me with this, should I add some code in the preamble?
> >>
> >> Thankyou in advance!
> >
> >
>
>
>
> --
> Kenedy Torcatt
> Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
> Contact: Gmailfacebook: ktorcatt
>   Yahoo   Twitter: kenfitness
>   Hotmail
>

Re: Numbering by section showed wrong!

2011-11-26 Thread Xu Wang 
OK great. I don't know how to solve your problem, but hopefully someone
will come along who can. It seems that you should try to improve your
question asking skills (yes, they are skills and require effort and
practice). You were given some great advice by Steve Litt:
http://www.mail-archive.com/lyx-users@lists.lyx.org/msg89979.html
Unfortunately you have either ignored or forgotten that advice. Please
study it again. I agree that .rar is not a good format to send in. Please
send in tar.gz.

You should *always* include your .lyx file (as small as possible but that
can still reproduce the "problem")

Best of luck with everything!

Xu


On Sun, Nov 27, 2011 at 2:48 AM, Kenedy Torcatt  wrote:

> yes, thankyou! here you have the file attached...
>
> 2011/11/27 Xu Wang :
> > So the numbering is correct in LyX and incorrect in the pdf? Could you
> > please send your .lyx file or just a minimum working example (ie a small
> > file that shows the problem)? Please send it to the list and not just
> me. I
> > don't know much about LyX -- I'm just trying to help you ask for help in
> the
> > best way.
> > On Sun, Nov 27, 2011 at 1:19 AM, Kenedy Torcatt 
> wrote:
> >>
> >> Hey, Just wrong in pdf, i didn't notice it. That's weird! Wow, how to
> fix
> >> that?
> >>
> >> 2011/11/27 Xu Wang :
> >> > Does it only show it wrong in LyX? Or does it also show wrong in the
> pdf
> >> > output?
> >> >
> >> > On Sat, Nov 26, 2011 at 11:36 PM, Kenedy Torcatt 
> >> > wrote:
> >> >>
> >> >> Hello LyX Users...
> >> >>
> >> >> I need to show in my thesis figures and equations by sections, but
> LyX
> >> >> is showing them wrong. I mean I activate the module
> >> >> using: Document→Settings→Modules and add the module "Number equations
> >> >> by section" and the same for figures, but when
> >> >> I change a section the figures is not showing from 1 like it should,
> >> >> For example, ilustrating this:
> >> >>
> >> >> -Section 1
> >> >>
> >> >> Figure 1.1
> >> >>
> >> >> -Section 2
> >> >>
> >> >> Figure 2.2 ( I need 2.1, then 2.2, .and on)
> >> >>
> >> >> The same thing occur with equations!
> >> >> That's the problem I'm facing it...
> >> >> Please help me with this, should I add some code in the preamble?
> >> >>
> >> >> Thankyou in advance!
> >> >
> >> >
> >>
> >>
> >>
> >> --
> >> Kenedy Torcatt
> >> Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
> >> Contact: Gmailfacebook: ktorcatt
> >>   Yahoo   Twitter: kenfitness
> >>   Hotmail
> >
> >
>
>
>
> --
> Kenedy Torcatt
> Personal Fitness Trainer / Geologist Engineer / Guitarist / Webmaster
> Contact: Gmailfacebook: ktorcatt
>   Yahoo   Twitter: kenfitness
>   Hotmail
>