RE: Tabular format 5 is not supported anymore.
On 17-Jul-2000 Martijn Brouwer wrote: Are these documents created with a pre 1.0.x version or with a a 1.1.x version x5? I have the same problem with a document created in 1.1.5 for linux and edited with 1.1.5 for windows, when I open it again under linux. That's another problem with MS-DOS encoded files!!! You have to recode the files to NOT use LF/CR as endline when opening them in linux! (I fixed this in the latest cvs version for tabulars) Jürgen -- -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ Dr. Jürgen VignaE-Mail: [EMAIL PROTECTED] Italienallee 13/N Tel/Fax: +39-0471-450260 / +39-0471-450296 I-39100 Bozen Web: http://www.sad.it/~jug -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ Paranoids are people, too; they have their own problems. It's easy to criticize, but if everybody hated you, you'd be paranoid too. -- D.J. Hicks
RE: Tabular format 5 is not supported anymore.
On 17-Jul-2000 Martijn Brouwer wrote: Are these documents created with a pre 1.0.x version or with a a 1.1.x version x5? I have the same problem with a document created in 1.1.5 for linux and edited with 1.1.5 for windows, when I open it again under linux. That's another problem with MS-DOS encoded files!!! You have to recode the files to NOT use LF/CR as endline when opening them in linux! (I fixed this in the latest cvs version for tabulars) Jürgen -- -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ Dr. Jürgen VignaE-Mail: [EMAIL PROTECTED] Italienallee 13/N Tel/Fax: +39-0471-450260 / +39-0471-450296 I-39100 Bozen Web: http://www.sad.it/~jug -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ Paranoids are people, too; they have their own problems. It's easy to criticize, but if everybody hated you, you'd be paranoid too. -- D.J. Hicks
RE: Tabular format < 5 is not supported anymore.
On 17-Jul-2000 Martijn Brouwer wrote: > > Are these documents created with a pre 1.0.x version or with a a 1.1.x > version x<5? > I have the same problem with a document created in 1.1.5 for linux and > edited with 1.1.5 for windows, when I open it again under linux. That's another problem with MS-DOS encoded files!!! You have to recode the files to NOT use LF/CR as endline when opening them in linux! (I fixed this in the latest cvs version for tabulars) Jürgen -- -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ Dr. Jürgen VignaE-Mail: [EMAIL PROTECTED] Italienallee 13/N Tel/Fax: +39-0471-450260 / +39-0471-450296 I-39100 Bozen Web: http://www.sad.it/~jug -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ Paranoids are people, too; they have their own problems. It's easy to criticize, but if everybody hated you, you'd be paranoid too. -- D.J. Hicks
Tabular format 5 is not supported anymore.
Lyx 1.1.5 has just been installed on our network of Linux machines. However, when trying to open files written in an older version I get the following error message. Tabular format 5 is not supported anymore Get an older version of LyX ( 1.1.x) for conversion! Although, the document is successfully opened, after dismissing this error message for each table, the tables need to be edited back to their original appearance. Also, inserted into the top left box of each table are the numbers 0 8 1 0 0 0 0. I am in the middle of writing my PhD thesis and have loads of tables and little time. Is there an easier quicker way to convert the older version tables to the newer version? Thanks to anyone that can help. Kate Evans-Jones Environmental Modelling and Earth Observation Group Dept of Geography University of Wales, Swansea UK
RE: Tabular format 5 is not supported anymore.
Lyx 1.1.5 has just been installed on our network of Linux machines. However, when trying to open files written in an older version I get the following error message. Tabular format 5 is not supported anymore Get an older version of LyX ( 1.1.x) for conversion! [snip] Is there an easier quicker way to convert the older version tables to the newer version? As in the error message told use lyx 1.0.4, load the document there, save it and you're done (version before 1.0.x are beta and therefore not anymore supported in the save/load format!) Greets Jürgen -- -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ Dr. Jürgen VignaE-Mail: [EMAIL PROTECTED] Italienallee 13/N Tel/Fax: +39-0471-450260 / +39-0471-450296 I-39100 Bozen Web: http://www.sad.it/~jug -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ "If a camel flies, no one laughs if it doesn't get very far." -- Paul White
RE: Tabular format 5 is not supported anymore.
At 05:04 PM 7/17/00 +0200, you wrote: Lyx 1.1.5 has just been installed on our network of Linux machines. However, when trying to open files written in an older version I get the following error message. Tabular format 5 is not supported anymore Get an older version of LyX ( 1.1.x) for conversion! [snip] Is there an easier quicker way to convert the older version tables to the newer version? As in the error message told use lyx 1.0.4, load the document there, save it and you're done (version before 1.0.x are beta and therefore not anymore supported in the save/load format!) Are these documents created with a pre 1.0.x version or with a a 1.1.x version x5? I have the same problem with a document created in 1.1.5 for linux and edited with 1.1.5 for windows, when I open it again under linux. __ Martijn Brouwer [EMAIL PROTECTED]
Re: Tabular format 5 is not supported anymore.
"Martijn" == Martijn Brouwer [EMAIL PROTECTED] writes: Martijn I have the same problem with a Martijn document created in 1.1.5 for linux and edited with 1.1.5 for Martijn windows, when I open it again under linux. Martin, we have a fix for this particular problem (dos encoded files) and I hope to release 1.1.5fix1 tomorrow with this in. JMarc
Tabular format 5 is not supported anymore.
Lyx 1.1.5 has just been installed on our network of Linux machines. However, when trying to open files written in an older version I get the following error message. Tabular format 5 is not supported anymore Get an older version of LyX ( 1.1.x) for conversion! Although, the document is successfully opened, after dismissing this error message for each table, the tables need to be edited back to their original appearance. Also, inserted into the top left box of each table are the numbers 0 8 1 0 0 0 0. I am in the middle of writing my PhD thesis and have loads of tables and little time. Is there an easier quicker way to convert the older version tables to the newer version? Thanks to anyone that can help. Kate Evans-Jones Environmental Modelling and Earth Observation Group Dept of Geography University of Wales, Swansea UK
RE: Tabular format 5 is not supported anymore.
Lyx 1.1.5 has just been installed on our network of Linux machines. However, when trying to open files written in an older version I get the following error message. Tabular format 5 is not supported anymore Get an older version of LyX ( 1.1.x) for conversion! [snip] Is there an easier quicker way to convert the older version tables to the newer version? As in the error message told use lyx 1.0.4, load the document there, save it and you're done (version before 1.0.x are beta and therefore not anymore supported in the save/load format!) Greets Jürgen -- -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ Dr. Jürgen VignaE-Mail: [EMAIL PROTECTED] Italienallee 13/N Tel/Fax: +39-0471-450260 / +39-0471-450296 I-39100 Bozen Web: http://www.sad.it/~jug -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ "If a camel flies, no one laughs if it doesn't get very far." -- Paul White
RE: Tabular format 5 is not supported anymore.
At 05:04 PM 7/17/00 +0200, you wrote: Lyx 1.1.5 has just been installed on our network of Linux machines. However, when trying to open files written in an older version I get the following error message. Tabular format 5 is not supported anymore Get an older version of LyX ( 1.1.x) for conversion! [snip] Is there an easier quicker way to convert the older version tables to the newer version? As in the error message told use lyx 1.0.4, load the document there, save it and you're done (version before 1.0.x are beta and therefore not anymore supported in the save/load format!) Are these documents created with a pre 1.0.x version or with a a 1.1.x version x5? I have the same problem with a document created in 1.1.5 for linux and edited with 1.1.5 for windows, when I open it again under linux. __ Martijn Brouwer [EMAIL PROTECTED]
Re: Tabular format 5 is not supported anymore.
"Martijn" == Martijn Brouwer [EMAIL PROTECTED] writes: Martijn I have the same problem with a Martijn document created in 1.1.5 for linux and edited with 1.1.5 for Martijn windows, when I open it again under linux. Martin, we have a fix for this particular problem (dos encoded files) and I hope to release 1.1.5fix1 tomorrow with this in. JMarc
Tabular format < 5 is not supported anymore.
Lyx 1.1.5 has just been installed on our network of Linux machines. However, when trying to open files written in an older version I get the following error message. Tabular format < 5 is not supported anymore Get an older version of LyX (< 1.1.x) for conversion! Although, the document is successfully opened, after dismissing this error message for each table, the tables need to be edited back to their original appearance. Also, inserted into the top left box of each table are the numbers 0 8 1 0 0 0 0. I am in the middle of writing my PhD thesis and have loads of tables and little time. Is there an easier quicker way to convert the older version tables to the newer version? Thanks to anyone that can help. Kate Evans-Jones Environmental Modelling and Earth Observation Group Dept of Geography University of Wales, Swansea UK
RE: Tabular format < 5 is not supported anymore.
> Lyx 1.1.5 has just been installed on our network of Linux machines. > However, when trying to open files written in an older version I get the > following error message. > > Tabular format < 5 is not supported anymore > Get an older version of LyX (< 1.1.x) for conversion! > [snip] > Is there an easier quicker way to convert the older version tables to > the newer version? As in the error message told use lyx 1.0.4, load the document there, save it and you're done (version before 1.0.x are beta and therefore not anymore supported in the save/load format!) Greets Jürgen -- -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ Dr. Jürgen VignaE-Mail: [EMAIL PROTECTED] Italienallee 13/N Tel/Fax: +39-0471-450260 / +39-0471-450296 I-39100 Bozen Web: http://www.sad.it/~jug -._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._ "If a camel flies, no one laughs if it doesn't get very far." -- Paul White
RE: Tabular format < 5 is not supported anymore.
At 05:04 PM 7/17/00 +0200, you wrote: > >> Lyx 1.1.5 has just been installed on our network of Linux machines. >> However, when trying to open files written in an older version I get the >> following error message. >> >> Tabular format < 5 is not supported anymore >> Get an older version of LyX (< 1.1.x) for conversion! >> >[snip] >> Is there an easier quicker way to convert the older version tables to >> the newer version? > >As in the error message told use lyx 1.0.4, load the document there, >save it and you're done (version before 1.0.x are beta and therefore >not anymore supported in the save/load format!) Are these documents created with a pre 1.0.x version or with a a 1.1.x version x<5? I have the same problem with a document created in 1.1.5 for linux and edited with 1.1.5 for windows, when I open it again under linux. __ Martijn Brouwer [EMAIL PROTECTED]
Re: Tabular format < 5 is not supported anymore.
> "Martijn" == Martijn Brouwer <[EMAIL PROTECTED]> writes: Martijn> I have the same problem with a Martijn> document created in 1.1.5 for linux and edited with 1.1.5 for Martijn> windows, when I open it again under linux. Martin, we have a fix for this particular problem (dos encoded files) and I hope to release 1.1.5fix1 tomorrow with this in. JMarc
