Re: [Machinekit] Re: Arcus3D-C1 Open source tripodkins cable printer.

2017-10-18 Thread Marco Negrini 
Sorry for the misquote. Buying is fine for me, do you know when/where will 
it available? (I am from Europe)


Il giorno lunedì 16 ottobre 2017 21:26:09 UTC+2, Daren Schwenke ha scritto:
>
> The mixing head was not open source.  Everything else was.  That was a 
> misquote.
> At least it will not be until we can get to producing them ourselves, so 
> the cost/benefit analysis people will do will land on the side of 'just buy 
> it'.
> We were trying to be totally self-funded to do so, but the cash ran out 
> while tooling up.
>
> But this one is totally open source, I can work on it basically for free, 
> and it gets/keeps the name out there while we get the above sorted out.
>
> On Monday, October 16, 2017 at 3:09:47 PM UTC-4, Marco Negrini wrote:
>>
>> Nice printer!
>>
>> Can I ask you a question about the Arcus-3d-M2, here?
>> I remember reading that you were trying to make the extruder as an open 
>> source project, how is it going? 
>>
>> I would really like to use it for its speed!
>>
>> Regards,
>> Marco Negrini
>>
>

-- 
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Re: [Machinekit] Re: Arcus3D-C1 Open source tripodkins cable printer.

2017-10-16 Thread Daren Schwenke 
The mixing head was not open source.  Everything else was.  That was a 
misquote.
At least it will not be until we can get to producing them ourselves, so 
the cost/benefit analysis people will do will land on the side of 'just buy 
it'.
We were trying to be totally self-funded to do so, but the cash ran out 
while tooling up.

But this one is totally open source, I can work on it basically for free, 
and it gets/keeps the name out there while we get the above sorted out.

On Monday, October 16, 2017 at 3:09:47 PM UTC-4, Marco Negrini wrote:
>
> Nice printer!
>
> Can I ask you a question about the Arcus-3d-M2, here?
> I remember reading that you were trying to make the extruder as an open 
> source project, how is it going? 
>
> I would really like to use it for its speed!
>
> Regards,
> Marco Negrini
>

-- 
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Re: [Machinekit] Re: Arcus3D-C1 Open source tripodkins cable printer.

2017-10-16 Thread Marco Negrini 
Nice printer!

Can I ask you a question about the Arcus-3d-M2, here?
I remember reading that you were trying to make the extruder as an open 
source project, how is it going? 

I would really like to use it for its speed!

Regards,
Marco Negrini

-- 
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Re: [Machinekit] Re: Arcus3D-C1 Open source tripodkins cable printer.

2017-10-16 Thread Marco Negrini 
Nice printer! just one thing: how does it go up and down?

Then, can I ask you a question about the Arcus-3d-M2, here?
I remember reading that you were trying to make the extruder as an open 
source project, how is it going? 

I would really like to use it for its speed!

Regards,
Marco Negrini

-- 
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Re: [Machinekit] Re: Arcus3D-C1 Open source tripodkins cable printer.

2017-10-12 Thread Bas de Bruijn 


> On 12 Oct 2017, at 18:55, Daren Schwenke  wrote:
> 
> Featured on Hackaday, again. :) 
> 
> 
> http://hackaday.com/2017/10/12/this-3d-cable-printer-remixes-the-delta/
> 
> Go Machinekit!  

Go Daren!

> 
> Still need to build a tripodkins config with Machineface...
> 
>> On Friday, October 6, 2017 at 5:10:35 PM UTC-4, Daren Schwenke wrote:
>> Built this with the intent of running Machinekit/tripodkins with it.
>> Have not worked on the config yet, but the hardware looks like it will work 
>> now, so soon.
>> 
>> https://hackaday.io/project/26938-arcus-3d-c1-cable-printer
>> 
>> https://youtu.be/KQ19fT4BQQU
>> 

-- 
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

[Machinekit] Re: Arcus3D-C1 Open source tripodkins cable printer.

2017-10-12 Thread Daren Schwenke 
Featured on Hackaday, again. :) 

http://hackaday.com/2017/10/12/this-3d-cable-printer-remixes-the-delta/

Go Machinekit!  

Still need to build a tripodkins config with Machineface...

On Friday, October 6, 2017 at 5:10:35 PM UTC-4, Daren Schwenke wrote:
>
> Built this with the intent of running Machinekit/tripodkins with it.
> Have not worked on the config yet, but the hardware looks like it will 
> work now, so soon.
>
> https://hackaday.io/project/26938-arcus-3d-c1-cable-printer
>
> https://youtu.be/KQ19fT4BQQU
>
>
>
>

-- 
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.