On 21/04/18 09:29, fairbanks-john
wrote:
There are major differences between the hm2_eth files in Linuxcnc and those in Machinekit At the most trivial basic level, it uses rtapi_xxx types which are just redefinitions of standard types, but sufficient to prevent compilation. Getting past those, there are major incompatibilities. Just a glance at hm2_eth.h, shows that there is a big hm2_eth_t struct that did not exist before. The hm2_eth.c file is 70% larger, partly as a consequence. Errors indicate that hm2_lowlevel_io_t has changed markedly too and within this and elsewhere, there are other functions used which only exist in Linuxcnc, such as need_soft_reboot(), rtapi_spawn_as_root(). If your 7i80 with its custom config works with Linuxcnc, I would use use that. Other people may be using 7i80s and be able to see why the existing driver does not like your bitfile, I don't own one, so cannot test anything. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. |
Re: [Machinekit] MESA 7i80 hm2_eth unable to read static internal configuration
'schoone...@btinternet.com' via Machinekit Tue, 24 Apr 2018 04:44:19 -0700
- [Machinekit] MESA 7i80 hm2_eth ... fairbanks-john
- Re: [Machinekit] MESA 7i80... 'schoone...@btinternet.com' via Machinekit