Re: [maemo-developers] Re: quries
On Sun, 2006-09-24 at 16:21 -0700, Greg Morgan wrote: A camera? I haven't tried that yet. The important note is that you may have to perform some steps by hand because a gui configuration application does not exist. Webcams require USB streaming (isochronous transfers I believe are what they are called) and this may not be supported by the Nokia's hardware, or even the USB OTG spec. You cannot connect webcams e.g. to VMware or QEMU. Maybe someone more knowledgeable can speak to this, but I do know that webcams are a bit different than pen drives and keyboards on the USB bus. HTH, Andrew ___ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers
Re: [maemo-developers] Re: quries
On 9/24/06, paolo delbene [EMAIL PROTECTED] wrote: can i connect via usb a keyboard, a pen usb to storage my data ? can i connect a web cam ? an hard drive ? A (USB) hard drive is no different than a pen drive and will definitely work. At one point I had a 2.5 30GB drive connected and it worked fine. Larry ___ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers
Re: [maemo-developers] Re: quries
On Sun, 2006-09-24 at 16:21 -0700, Greg Morgan wrote: A camera? I haven't tried that yet. The important note is that you may have to perform some steps by hand because a gui configuration application does not exist. Webcams require USB streaming (isochronous transfers I believe are what they are called) and this may not be supported by the Nokia's hardware, or even the USB OTG spec. You cannot connect webcams e.g. to VMware or The 770 is not an OTG device, and web cams work fine. You might have to build the kernel module for your particular device, but that is not hard. The 770 must have it's USB set to host mode, but that is well documented. QEMU. Maybe someone more knowledgeable can speak to this, but I do know that webcams are a bit different than pen drives and keyboards on the USB bus. Yes, they require different drivers, and present a different interface. Once the module is loaded it appears as a standard V4L or V4L2 device. Ed Okerson ___ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers