Re: [Mailman-Users] Mailman 2.1: ImportError: No module namedpythonlib.StringIO
Hmmm, it may be a Python error. Perhaps your RPM version of Python doesn't load all the modules that you need. This has been a problem in the past with other distributions. See if there are other supplemental RPM's for Python - like a development RPM that has additional modules (like the StringIO module). Good Luck - Jon Carnes - Original Message - From: <[EMAIL PROTECTED]> To: "Jon Carnes" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Saturday, January 25, 2003 5:21 PM Subject: Re: [Mailman-Users] Mailman 2.1: ImportError: No module named pythonlib.StringIO > Thanks Jon, it doesn't look like that is the problem though. > I reinstalled with > > ./configure --with-python=/usr/bin/python --with-mail-gid=510 --with-cgi-gi d=16 --prefix=/home/mailman > > and it has the same error. I'm using qmail btw an some virtual domains > though this mailman is in the default place. > > The other mailman I have running in a different place for a different > domain (v 2.0.13) is still running fine even with the new python. > > When I rpm -Uvh to the new python it replaced the 1.5 version... > > root@kunk ppc]# /usr/bin/python -V > Python 2.2.2 > > There is no other python executable on the machine... > > mailman@kunk mailman-2.1]$ rpm -qa | grep python > rpm-python-4.0.3-1.03b > libxslt-python-1.0.15-1 > python-devel-2.2.2-7 > python-docs-2.2.2-7 > python-tools-2.2.2-7 > python-xmlrpc-1.5.1-7.x.3 > libxml2-python-2.4.19-1 > python-2.2.2-7 > > Thanks, > Bob > > User Jon Carnes says: > > I think this one has flown across the list a few times. Try adding a switch > > during the ./configure stage that points to the python2 executable. > > > > Good Luck - Jon Carnes > > - Original Message - > > From: <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Saturday, January 25, 2003 2:52 PM > > Subject: [Mailman-Users] Mailman 2.1: ImportError: No module named > > pythonlib.StringIO > > > > > > > updated installation from 2.0.13 > > > > > > Had to install new python, python-2.2.2-7 compiled from source RPM > > > after updating the required packages (i.e. db4). > > > > > > Any ideas on where the source of this problem lies? It's running > > > on YDL 2.3 (redhat 7.2 like ppc system) > > > > > > Bob > > > > > > -- > > > Mailman-Users mailing list > > > [EMAIL PROTECTED] > > > http://mail.python.org/mailman/listinfo/mailman-users > > > Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py > > > Searchable Archives: > > http://www.mail-archive.com/mailman-users%40python.org/ > > > > > > This message was sent to: [EMAIL PROTECTED] > > > Unsubscribe or change your options at > > > http://mail.python.org/mailman/options/mailman-users/jonc%40nc.rr.com > > > > -- > /~\ The ASCII| Robert E. Brose II | J. River, Inc. > \ / Ribbon Campaign | http://www.jriver.com/~bob | 125 North First St > X Help cure HTML Email | mailto:[EMAIL PROTECTED] | Mpls, MN 55401 > / \ || 612-339-2521 x212 -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: archive@jab.org Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org
Re: [Mailman-Users] Mailman 2.1: ImportError: No module namedpythonlib.StringIO
Thanks Jon, it doesn't look like that is the problem though. I reinstalled with ./configure --with-python=/usr/bin/python --with-mail-gid=510 --with-cgi-gid=16 --prefix=/home/mailman and it has the same error. I'm using qmail btw an some virtual domains though this mailman is in the default place. The other mailman I have running in a different place for a different domain (v 2.0.13) is still running fine even with the new python. When I rpm -Uvh to the new python it replaced the 1.5 version... root@kunk ppc]# /usr/bin/python -V Python 2.2.2 There is no other python executable on the machine... mailman@kunk mailman-2.1]$ rpm -qa | grep python rpm-python-4.0.3-1.03b libxslt-python-1.0.15-1 python-devel-2.2.2-7 python-docs-2.2.2-7 python-tools-2.2.2-7 python-xmlrpc-1.5.1-7.x.3 libxml2-python-2.4.19-1 python-2.2.2-7 Thanks, Bob User Jon Carnes says: > I think this one has flown across the list a few times. Try adding a switch > during the ./configure stage that points to the python2 executable. > > Good Luck - Jon Carnes > - Original Message - > From: <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, January 25, 2003 2:52 PM > Subject: [Mailman-Users] Mailman 2.1: ImportError: No module named > pythonlib.StringIO > > > > updated installation from 2.0.13 > > > > Had to install new python, python-2.2.2-7 compiled from source RPM > > after updating the required packages (i.e. db4). > > > > Any ideas on where the source of this problem lies? It's running > > on YDL 2.3 (redhat 7.2 like ppc system) > > > > Bob > > > > -- > > Mailman-Users mailing list > > [EMAIL PROTECTED] > > http://mail.python.org/mailman/listinfo/mailman-users > > Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py > > Searchable Archives: > http://www.mail-archive.com/mailman-users%40python.org/ > > > > This message was sent to: [EMAIL PROTECTED] > > Unsubscribe or change your options at > > http://mail.python.org/mailman/options/mailman-users/jonc%40nc.rr.com > -- /~\ The ASCII| Robert E. Brose II | J. River, Inc. \ / Ribbon Campaign | http://www.jriver.com/~bob | 125 North First St X Help cure HTML Email | mailto:[EMAIL PROTECTED] | Mpls, MN 55401 / \ || 612-339-2521 x212 -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: archive@jab.org Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org
Re: [Mailman-Users] Mailman 2.1: ImportError: No module namedpythonlib.StringIO
I think this one has flown across the list a few times. Try adding a switch during the ./configure stage that points to the python2 executable. Good Luck - Jon Carnes - Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, January 25, 2003 2:52 PM Subject: [Mailman-Users] Mailman 2.1: ImportError: No module named pythonlib.StringIO > updated installation from 2.0.13 > > Had to install new python, python-2.2.2-7 compiled from source RPM > after updating the required packages (i.e. db4). > > Any ideas on where the source of this problem lies? It's running > on YDL 2.3 (redhat 7.2 like ppc system) > > Bob > > -- > Mailman-Users mailing list > [EMAIL PROTECTED] > http://mail.python.org/mailman/listinfo/mailman-users > Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py > Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ > > This message was sent to: [EMAIL PROTECTED] > Unsubscribe or change your options at > http://mail.python.org/mailman/options/mailman-users/jonc%40nc.rr.com -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: archive@jab.org Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org