[mapserver-users] RE: Problems with Query Template (Chameleon)
Jeff, I have ruled it out from being a chameleon issue - as the issue still occurs when using the ITASCA demo. to replicate I created a tab file using ogr2ogr ie: (in Dos) cd C:\ms4w\apps\mapserv-demo\data ogr2ogr -f MapInfo File lakespy2.Tab lakespy2.shp I then adjusted the ITASCA.map file to reference the newly created Tab file instead of the shape and the querying then no longer worked for that layer. This is good in some ways as I guess its a MapServer issue rather than the add-ons. However with reference to the first point you make would you be able to offer any more advise as I am uncertain as to what/how to do what you describe. make sure GDAL/OGR is accessing your file properly (testing with the ogrinfo command on your old installation version and with your new installation GDAL version, and compare the ogrinfo results) If anyone can help I would be very grateful Thanks Andy -- View this message in context: http://osgeo-org.1803224.n2.nabble.com/Problems-with-Query-Template-Chameleon-tp6252878p6330562.html Sent from the Mapserver - User mailing list archive at Nabble.com. ___ mapserver-users mailing list mapserver-users@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/mapserver-users
[mapserver-users] Out of Office AutoReply: Problems with Query Template (Chameleon)
I am currently out of the Office and will be back on the 3rd May 2011 - Please contact supp...@aligned-assets.co.uk The information contained in or attached to this message is the responsibility of the sender and is meant for the confidential use of the intended recipients. It does not necessarily represent the position of Aligned Assets. If you are not an intended recipient you are notified that you have received this communication in error and that review, dissemination or copying of this communication is prohibited. If you have received this in error, please notify us. Aligned Assets Limited Unit 5 River Court Albert Drive Sheerwater Woking GU21 5RP Company Registration No: 4610724 -- View this message in context: http://osgeo-org.1803224.n2.nabble.com/Problems-with-Query-Template-Chameleon-tp6252878p6330717.html Sent from the Mapserver - User mailing list archive at Nabble.com.___ mapserver-users mailing list mapserver-users@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/mapserver-users
[mapserver-users] RE: Problems with Query Template (Chameleon)
Jeff Your quite right. Sorry I do not know what happened there (I have swapped settings so much on my pc here I guess I failed to swap something back). I can confirm it works in ITASCA demo, but does not within Chameleon. Easily recreated by Installing Chameleon and doing the same sort of thing (In Dos) cd C:\ms4w\apps\chameleon\samples\data ogr2ogr -f MapInfo File popplace.Tab popplace.shp Then change map file and goto the demo url http://localhost/chameleon/samples/sample_basic_jsapi.phtml Now when I click on one of the cities I get an actual error (which may be progress) Warning: array_merge(): Argument #1 is not an array in C:\ms4w\apps\chameleon\htdocs\common\wrapper\map_query.php on line 577 Warning: Invalid argument supplied for foreach() in C:\ms4w\apps\chameleon\htdocs\widgets\Query\QueryResults.phtml on line 294 Looks like the Chameleon List is rarely used these days and unfortunately I have no budget available to get this issue professionally sorted, Its looking like I am up a creek with no paddle... Thanks in advance Andy From: Jeff McKenna [via OSGeo.org] [mailto:ml-node+6330714-2002393781-329...@n2.nabble.com] Sent: 04 May 2011 14:04 To: Andy Hird Subject: RE: Problems with Query Template (Chameleon) On 11-05-04 9:07 AM, Andy Hird wrote: Jeff, I have ruled it out from being a chameleon issue - as the issue still occurs when using the ITASCA demo. to replicate I created a tab file using ogr2ogr ie: (in Dos) cd C:\ms4w\apps\mapserv-demo\data ogr2ogr -f MapInfo File lakespy2.Tab lakespy2.shp I then adjusted the ITASCA.map file to reference the newly created Tab file instead of the shape and the querying then no longer worked for that layer. Hello Andy, I am not sure what is happening for you. I just installed a fresh MS4W version 3.0.2, then created lakespy2.tab as you did, and then modified the itasca.map file to point to the tab file (using the mapfile example from http://www.mapserver.org/input/vector/mapinfo.html), and I am able to query the tab file in the Itasca application. Note that if you are stuck on something you can always contact a MapServer service provider like us that offers professional support for MapServer. -jeff -- Jeff McKenna MapServer Consulting and Training Services http://www.gatewaygeomatics.com/ ___ mapserver-users mailing list [hidden email] http://lists.osgeo.org/mailman/listinfo/mapserver-users _ If you reply to this email, your message will be added to the discussion below: http://osgeo-org.1803224.n2.nabble.com/Problems-with-Query-Template-Cham eleon-tp6252878p6330714.html To unsubscribe from Problems with Query Template (Chameleon), click here http://osgeo-org.1803224.n2.nabble.com/template/NamlServlet.jtp?macro=u nsubscribe_by_codenode=6252878code=YW5keS5oaXJkQGFsaWduZWQtYXNzZXRzLmN vLnVrfDYyNTI4Nzh8MjAyOTU1Nzk4OQ== . The information contained in or attached to this message is the responsibility of the sender and is meant for the confidential use of the intended recipients. It does not necessarily represent the position of Aligned Assets. If you are not an intended recipient you are notified that you have received this communication in error and that review, dissemination or copying of this communication is prohibited. If you have received this in error, please notify us. Aligned Assets Limited Unit 5 River Court Albert Drive Sheerwater Woking GU21 5RP Company Registration No: 4610724 -- View this message in context: http://osgeo-org.1803224.n2.nabble.com/Problems-with-Query-Template-Chameleon-tp6252878p6331102.html Sent from the Mapserver - User mailing list archive at Nabble.com.___ mapserver-users mailing list mapserver-users@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/mapserver-users
[mapserver-users] RE: Problems with Query Template
Steve, Thanks so much for the reply and apologies for long delay (have been on holiday). I have carried out the url line you specified http://localhost/cgi-bin/mapserv.exe?MAP=/ms4w/apps/MFRS_Maps/Map/MFRS_Maps.mapqlayer=Wardsqindex=1mode=indexquery and the result is as follows: 1. Internet Explorer Returns: msQueryByIndex(): Search returned no results. Not valid record request. 2. In my ms_error.txt file I am returned with: [Tue May 03 16:12:13 2011].244000 CGI Request 1 on process 7676 [Tue May 03 16:12:13 2011].244000 msQueryByIndex(): Search returned no results. Not valid record request. [Tue May 03 16:12:13 2011].244000 msFreeMap(): freeing map at 01C8AF68. I have tried to look up what the message means and I can only assume its an issue with the Template side of things? Using my shape file layer: http://localhost/cgi-bin/mapserv.exe?MAP=/ms4w/apps/MFRS_Maps/Map/MFRS_Maps.mapqlayer=10K+StreetViewqindex=1mode=indexquery I get this back: msQueryByIndex(): Search returned no results. Not valid record request. msRASTERLayerGetShape(): General error message. Out of range shape index requested. Requested -1 but only 0 shapes available. I am really quite stumped and unfortunately running out of time to throw at this. Any help would help greatly. Thanks in advance Andy -- Message: 1 Date: Wed, 13 Apr 2011 13:59:34 -0500 From: Lime, Steve D (DNR) steve.l...@state.mn.us Subject: [mapserver-users] RE: Problems with Query Template (Chameleon) To: Andy Hird andy.h...@aligned-assets.co.uk, mapserver-users@lists.osgeo.org mapserver-users@lists.osgeo.org Message-ID: a7f7b3043d3bf0438f1206baa3c9933c0831712...@mnmail05.ead.state.mn.us Content-Type: text/plain; charset=utf-8 There’s nothing in the templates that would care about the data source be it shapefile or mapinfo tab file. If it were something like missing attributes you should get the template content back but without tags being processed. Can you take this outside of Chameleon to debug? You could issue a query against the MasterMap Area layer and see what happens. For example: http://yourserver/cgi-bin/mapserv.exe?/yourmapfile.mapqlayer=MasterMap+Areaqindex=1mode=indexquery That should pull the first record from the MasterMap Area layer. Steve From: Andy Hird [mailto:andy.h...@aligned-assets.co.uk] Sent: Tuesday, April 12, 2011 4:28 PM To: Lime, Steve D (DNR); mapserver-users@lists.osgeo.org Subject: RE: Problems with Query Template (Chameleon) Steve Thanks for the reply. There are no errors being logged and as I say it works for files which are not MapInfo Tab files. For instance the following works fine. LAYER NAME 10K StreetView STATUS ON TYPE RASTER MINSCALEDENOM 6000#600 MAXSCALEDENOM 22499 #2999 TILEINDEX C:\ms4w\apps\\data\10K.shp TILEITEM LOCATION CLASS TEMPLATE templates/.html #TOLERANCE 6 TOLERANCEUNITS PIXELS END END I assume that this is because it’s a shp file which has a dbf file. This does not work: LAYER NAME MasterMap Area TYPE POLYGON MINSCALEDENOM 1 MAXSCALEDENOM 5999 STATUS ON CONNECTIONTYPE OGR CONNECTION C:\ms4w\apps\\data\MM_Topo_Area.TAB STYLEITEM AUTO CLASS TEMPLATE templates/.html #TOLERANCE 6 TOLERANCEUNITS PIXELS END # Class section HEADER templates/_header.html FOOTER templates/_footer.html END Its bugging me like crazy as I can’t figure it out, - the second part of my question was: “However If someone can provide example of placing a button on a html page that would call query functionality that would be very helpful too.†If it’s easier for someone to advise on that it would be appreciated. Thanks Andy From: Lime, Steve D (DNR) [mailto:steve.l...@state.mn.us] Sent: 11 April 2011 22:49 To: Andy Hird; mapserver-users@lists.osgeo.org Subject: RE: Problems with Query Template (Chameleon) Not a Chameleon user so I may not be of much help. Any errors being logged? What does the template file look like? It’s possible that ms4w_2.3.1’s MapServer did not require a magic string be on the first line of the template. In new versions it is required. Basically the first line of a template must contain the string “MapServer Templateâ€. Typically you’d put that in a HTML comment, e.g.: !—MapServer Tempate -- ...template follows... That’s my first guess anyway. Steve From: mapserver-users-boun...@lists.osgeo.org [mailto:mapserver-users-boun...@lists.osgeo.org] On Behalf Of Andy Hird Sent: Friday, April 08, 2011 3:00 AM To: mapserver-users@lists.osgeo.org Subject: [mapserver-users] Problems with Query Template (Chameleon) Hi there - really need some help if you can please regarding Template Query feature, and I have googled to exhaustion :-/ Background: I have an existing Map file referencing MapInfo Tab files running under ms4w_2.3.1 chameleon_ms4w-2.4.1 I have installed ms4w
[mapserver-users] RE: Problems with Query Template (Chameleon)
Steve Thanks for the reply. There are no errors being logged and as I say it works for files which are not MapInfo Tab files. For instance the following works fine. LAYER NAME 10K StreetView STATUS ON TYPE RASTER MINSCALEDENOM 6000#600 MAXSCALEDENOM 22499 #2999 TILEINDEX C:\ms4w\apps\\data\10K.shp TILEITEM LOCATION CLASS TEMPLATE templates/.html #TOLERANCE 6 TOLERANCEUNITS PIXELS END END I assume that this is because it’s a shp file which has a dbf file. This does not work: LAYER NAME MasterMap Area TYPE POLYGON MINSCALEDENOM 1 MAXSCALEDENOM 5999 STATUS ON CONNECTIONTYPE OGR CONNECTION C:\ms4w\apps\\data\MM_Topo_Area.TAB STYLEITEM AUTO CLASS TEMPLATE templates/.html #TOLERANCE 6 TOLERANCEUNITS PIXELS END # Class section HEADER templates/_header.html FOOTER templates/_footer.html END Its bugging me like crazy as I can’t figure it out, - the second part of my question was: “However If someone can provide example of placing a button on a html page that would call query functionality that would be very helpful too.” If it’s easier for someone to advise on that it would be appreciated. Thanks Andy From: Lime, Steve D (DNR) [mailto:steve.l...@state.mn.us] Sent: 11 April 2011 22:49 To: Andy Hird; mapserver-users@lists.osgeo.org Subject: RE: Problems with Query Template (Chameleon) Not a Chameleon user so I may not be of much help. Any errors being logged? What does the template file look like? It’s possible that ms4w_2.3.1’s MapServer did not require a magic string be on the first line of the template. In new versions it is required. Basically the first line of a template must contain the string “MapServer Template”. Typically you’d put that in a HTML comment, e.g.: !—MapServer Tempate -- ...template follows... That’s my first guess anyway. Steve From: mapserver-users-boun...@lists.osgeo.org [mailto:mapserver-users-boun...@lists.osgeo.org] On Behalf Of Andy Hird Sent: Friday, April 08, 2011 3:00 AM To: mapserver-users@lists.osgeo.org Subject: [mapserver-users] Problems with Query Template (Chameleon) Hi there - really need some help if you can please regarding Template Query feature, and I have googled to exhaustion :-/ Background: I have an existing Map file referencing MapInfo Tab files running under ms4w_2.3.1 chameleon_ms4w-2.4.1 I have installed ms4w - V3.0.1 and chameleon V2.6.0 Copied my Map file across and made the necessary adjustments to get it working. However when using the Query Widget (info of layers at mouse click) against MapInfo Layers it is no longer returning results, and yet it did previously. My knowledge is not that great in php etc – but I suspect that its requiring a dbf rather than MapInfo Tab as it does work with a shp, dbf set of files. Can Anyone help please as I really struggling – ideally I just want to use the old widget. However If someone can provide example of placing a button on a html page that would call query functionality that would be very helpful too. Thanks in advance Andy The information contained in or attached to this message is the responsibility of the sender and is meant for the confidential use of the intended recipients. It does not necessarily represent the position of Aligned Assets. If you are not an intended recipient you are notified that you have received this communication in error and that review, dissemination or copying of this communication is prohibited. If you have received this in error, please notify us. Aligned Assets Limited Unit 5 River Court Albert Drive Sheerwater Woking GU21 5RP Company Registration No: 4610724 ___ mapserver-users mailing list mapserver-users@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/mapserver-users
[mapserver-users] Problems with Query Template (Chameleon)
Hi there - really need some help if you can please regarding Template Query feature, and I have googled to exhaustion :-/ Background: I have an existing Map file referencing MapInfo Tab files running under ms4w_2.3.1 chameleon_ms4w-2.4.1 I have installed ms4w - V3.0.1 and chameleon V2.6.0 Copied my Map file across and made the necessary adjustments to get it working. However when using the Query Widget (info of layers at mouse click) against MapInfo Layers it is no longer returning results, and yet it did previously. My knowledge is not that great in php etc - but I suspect that its requiring a dbf rather than MapInfo Tab as it does work with a shp, dbf set of files. Can Anyone help please as I really struggling - ideally I just want to use the old widget. However If someone can provide example of placing a button on a html page that would call query functionality that would be very helpful too. Thanks in advance Andy The information contained in or attached to this message is the responsibility of the sender and is meant for the confidential use of the intended recipients. It does not necessarily represent the position of Aligned Assets. If you are not an intended recipient you are notified that you have received this communication in error and that review, dissemination or copying of this communication is prohibited. If you have received this in error, please notify us. Aligned Assets Limited Unit 5 River Court Albert Drive Sheerwater Woking GU21 5RP Company Registration No: 4610724 ___ mapserver-users mailing list mapserver-users@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/mapserver-users
