Re: [mapserver-users] Getting all endpoints on a single MapServer instance
I figure it's reasonable to assume that not all services end up in the catalogues (for lots of reasons) - I'm already looking in lots of catalogues - so I was hoping there was another way to get the other endpoints if you already had at least one map on that server. But if it can't be done, then it can't be done. Thanks again, Jonathan On 2018-10-08 15:53, Lime, Steve D (MNIT) wrote: Correct, MapServer doesn't provide this capability. You'd have to uses a catalog services or write something custom. -Original Message- From: mapserver-users [mailto:mapserver-users-boun...@lists.osgeo.org] On Behalf Of Passmore, James H. Sent: Monday, October 08, 2018 5:00 AM To: mapserver-users@lists.osgeo.org Subject: Re: [mapserver-users] Getting all endpoints on a single MapServer instance Is there a way to get all the endpoints (maps) that are available from a given server? I hope not, each service should be isolated from another. To find different services from a single provider you should search some metadata catalogue, perhaps: http://mcc.jrc.ec.europa.eu/emis/dev.py?N=42=277_page=Catalogue%20Service%20(CSW)_chap=Data%20access James -Original Message- Today's Topics: 1. Getting all endpoints on a single MapServerinstance (Jonathan Moules) -- Message: 1 Date: Sat, 6 Oct 2018 20:08:45 +0100 From: Jonathan Moules To: mapserver-users@lists.osgeo.org Subject: [mapserver-users] Getting all endpoints on a single MapServer instance Message-ID: <92a837a1-0334-a0e3-6757-bdee4bc22...@lightpear.com> Content-Type: text/plain; charset=utf-8; format=flowed Hi List, Is there a way to get all the endpoints (maps) that are available from a given server? Or put another way, take this example where these two URL's both use different map files, and so have different layers (one is pointing to "wms_4km_modisa-bbp.map", the other to "wms_9km_seawifs-pp.map"): http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_4km_modisa-bbp.map=wms=getcapabilities http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_9km_seawifs-pp.map=wms=getcapabilities If I only knew one of those URL's, would it be possible for me to figure out the other one, ideally via a GET request? Thanks, Jonathan This message (and any attachments) is for the recipient only. NERC is subject to the Freedom of Information Act 2000 and the contents of this email and any reply you make may be disclosed by NERC unless it is exempt from release under the Act. Any material supplied to NERC may be stored in an electronic records management system. ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users
Re: [mapserver-users] Getting all endpoints on a single MapServer instance
Correct, MapServer doesn't provide this capability. You'd have to uses a catalog services or write something custom. -Original Message- From: mapserver-users [mailto:mapserver-users-boun...@lists.osgeo.org] On Behalf Of Passmore, James H. Sent: Monday, October 08, 2018 5:00 AM To: mapserver-users@lists.osgeo.org Subject: Re: [mapserver-users] Getting all endpoints on a single MapServer instance > Is there a way to get all the endpoints (maps) that are available from a > given server? I hope not, each service should be isolated from another. To find different services from a single provider you should search some metadata catalogue, perhaps: http://mcc.jrc.ec.europa.eu/emis/dev.py?N=42=277_page=Catalogue%20Service%20(CSW)_chap=Data%20access James -Original Message- Today's Topics: 1. Getting all endpoints on a single MapServerinstance (Jonathan Moules) -- Message: 1 Date: Sat, 6 Oct 2018 20:08:45 +0100 From: Jonathan Moules To: mapserver-users@lists.osgeo.org Subject: [mapserver-users] Getting all endpoints on a single MapServer instance Message-ID: <92a837a1-0334-a0e3-6757-bdee4bc22...@lightpear.com> Content-Type: text/plain; charset=utf-8; format=flowed Hi List, Is there a way to get all the endpoints (maps) that are available from a given server? Or put another way, take this example where these two URL's both use different map files, and so have different layers (one is pointing to "wms_4km_modisa-bbp.map", the other to "wms_9km_seawifs-pp.map"): http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_4km_modisa-bbp.map=wms=getcapabilities http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_9km_seawifs-pp.map=wms=getcapabilities If I only knew one of those URL's, would it be possible for me to figure out the other one, ideally via a GET request? Thanks, Jonathan This message (and any attachments) is for the recipient only. NERC is subject to the Freedom of Information Act 2000 and the contents of this email and any reply you make may be disclosed by NERC unless it is exempt from release under the Act. Any material supplied to NERC may be stored in an electronic records management system. ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users
Re: [mapserver-users] Getting all endpoints on a single MapServer instance
> Is there a way to get all the endpoints (maps) that are available from a > given server? I hope not, each service should be isolated from another. To find different services from a single provider you should search some metadata catalogue, perhaps: http://mcc.jrc.ec.europa.eu/emis/dev.py?N=42=277_page=Catalogue%20Service%20(CSW)_chap=Data%20access James -Original Message- Today's Topics: 1. Getting all endpoints on a single MapServerinstance (Jonathan Moules) -- Message: 1 Date: Sat, 6 Oct 2018 20:08:45 +0100 From: Jonathan Moules To: mapserver-users@lists.osgeo.org Subject: [mapserver-users] Getting all endpoints on a single MapServer instance Message-ID: <92a837a1-0334-a0e3-6757-bdee4bc22...@lightpear.com> Content-Type: text/plain; charset=utf-8; format=flowed Hi List, Is there a way to get all the endpoints (maps) that are available from a given server? Or put another way, take this example where these two URL's both use different map files, and so have different layers (one is pointing to "wms_4km_modisa-bbp.map", the other to "wms_9km_seawifs-pp.map"): http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_4km_modisa-bbp.map=wms=getcapabilities http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_9km_seawifs-pp.map=wms=getcapabilities If I only knew one of those URL's, would it be possible for me to figure out the other one, ideally via a GET request? Thanks, Jonathan This message (and any attachments) is for the recipient only. NERC is subject to the Freedom of Information Act 2000 and the contents of this email and any reply you make may be disclosed by NERC unless it is exempt from release under the Act. Any material supplied to NERC may be stored in an electronic records management system. ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users
Re: [mapserver-users] Getting all endpoints on a single MapServer instance
Thanks both for the answer. That's a shame, but it's good to know. Thanks again! On 2018-10-08 07:24, Marco wrote: No. Mapserver is completely stateless. It loads the file specified in the request and parses it as a map file. That file can be any file on the file system which is readable by mapserver. Mapserver has no configuration file holding the files which are regarded as mapfiles. MArcp On 06-10-18 21:08, Jonathan Moules wrote: Hi List, Is there a way to get all the endpoints (maps) that are available from a given server? Or put another way, take this example where these two URL's both use different map files, and so have different layers (one is pointing to "wms_4km_modisa-bbp.map", the other to "wms_9km_seawifs-pp.map"): http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_4km_modisa-bbp.map=wms=getcapabilities http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_9km_seawifs-pp.map=wms=getcapabilities If I only knew one of those URL's, would it be possible for me to figure out the other one, ideally via a GET request? Thanks, Jonathan ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users
Re: [mapserver-users] Getting all endpoints on a single MapServer instance
No. Mapserver is completely stateless. It loads the file specified in the request and parses it as a map file. That file can be any file on the file system which is readable by mapserver. Mapserver has no configuration file holding the files which are regarded as mapfiles. MArcp On 06-10-18 21:08, Jonathan Moules wrote: Hi List, Is there a way to get all the endpoints (maps) that are available from a given server? Or put another way, take this example where these two URL's both use different map files, and so have different layers (one is pointing to "wms_4km_modisa-bbp.map", the other to "wms_9km_seawifs-pp.map"): http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_4km_modisa-bbp.map=wms=getcapabilities http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_9km_seawifs-pp.map=wms=getcapabilities If I only knew one of those URL's, would it be possible for me to figure out the other one, ideally via a GET request? Thanks, Jonathan ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users
Re: [mapserver-users] Getting all endpoints on a single MapServer instance
Hi Jonathan No, you can't get all end points. The GetCapabilities response only rturns what is listed in the specific map file. Regards Robert -Original Message- From: mapserver-users On Behalf Of Jonathan Moules Sent: Sunday, 7 October 2018 8:09 a.m. To: mapserver-users@lists.osgeo.org Subject: [mapserver-users] Getting all endpoints on a single MapServer instance Hi List, Is there a way to get all the endpoints (maps) that are available from a given server? Or put another way, take this example where these two URL's both use different map files, and so have different layers (one is pointing to "wms_4km_modisa-bbp.map", the other to "wms_9km_seawifs-pp.map"): http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_4km_modisa-bbp.map=wms=getcapabilities http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_9km_seawifs-pp.map=wms=getcapabilities If I only knew one of those URL's, would it be possible for me to figure out the other one, ideally via a GET request? Thanks, Jonathan ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users
[mapserver-users] Getting all endpoints on a single MapServer instance
Hi List, Is there a way to get all the endpoints (maps) that are available from a given server? Or put another way, take this example where these two URL's both use different map files, and so have different layers (one is pointing to "wms_4km_modisa-bbp.map", the other to "wms_9km_seawifs-pp.map"): http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_4km_modisa-bbp.map=wms=getcapabilities http://gmis.jrc.ec.europa.eu/cgi-bin/mapserv?map=/srv/www/htdocs/wms/wms_9km_seawifs-pp.map=wms=getcapabilities If I only knew one of those URL's, would it be possible for me to figure out the other one, ideally via a GET request? Thanks, Jonathan ___ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users
