Re: [Meep-discuss] Designing inclined geometry

2014-02-13 Thread ISAAC MATERE
Hi prem, am still stuck on how to make 2 or more wave guides incident to each 
other at some angles, is it that am the one getting it wrong or what?
kindly assist





On Tuesday, December 24, 2013 10:23 AM, prem prakash singh 
prem0prak...@gmail.com wrote:
 
Dear Filip,

Thanks. I went with your suggestions. 
1. I tried 1st option (with 100 overlapping block) but still it is not 
perfectly inclined. I feel potentially infinite number of small overlapping 
blocks is theoretical approach. Please correct, if I am understanding wrong. 
2. Could you please forward python meep codes, I will see if I can get 
something out of it. 
3  One more point I want to know that is there no way to give angle parameter 
in geometry? so that geometry will be inclined to XY plane.      







With Best Regards .

Prem Prakash Singh(CSIR-SRF)
Centre for nano science and  Engineering and   
Department of Mechanical Engineering,
Indian Institute of Science, Bangalore,
premn...@mecheng.iisc.ernet.in




On Wed, Dec 4, 2013 at 2:05 PM, Filip Dominec filip.domi...@gmail.com wrote:

Dear Prem,
as far as I know, this task would require either
1) to build the desired structure by overlapping a big (potentially
infinite) number of overlapping blocks,
or
2) load the structure pixel-by-pixel either from a data file, or from
a mathematical expression.
I spent several days implementing the 2nd way in Python and now I can
define virtually any inclined/bent/distorted object. Some info is at
http://fzu.cz/~dominecf/misc/meep/ and I can send the fresh sources to
you. But it uses python-meep.
F.

2013/12/3, prem prakash singh prem0prak...@gmail.com:

 Dear Meep users,
 I want to design two inclined fiber for coupling. In Cartesian system, I
 didn't get any angle parameter for design.  So whenever I am selecting
 block or cylinder, it comes parallel to X-Y axis not inclined. Could any
 one please  educate me to design such inclined geometry.
 Required structures is appended below.

 [image: Inline image 1]

 With Best Regards .

 Prem Prakash Singh
 IISc



___
meep-discuss mailing list
meep-discuss@ab-initio.mit.edu
http://ab-initio.mit.edu/cgi-bin/mailman/listinfo/meep-discuss___
meep-discuss mailing list
meep-discuss@ab-initio.mit.edu
http://ab-initio.mit.edu/cgi-bin/mailman/listinfo/meep-discuss

Re: [Meep-discuss] Designing inclined geometry

2013-12-04 Thread Filip Dominec
Dear Prem,
as far as I know, this task would require either
1) to build the desired structure by overlapping a big (potentially
infinite) number of overlapping blocks,
or
2) load the structure pixel-by-pixel either from a data file, or from
a mathematical expression.
I spent several days implementing the 2nd way in Python and now I can
define virtually any inclined/bent/distorted object. Some info is at
http://fzu.cz/~dominecf/misc/meep/ and I can send the fresh sources to
you. But it uses python-meep.
F.

2013/12/3, prem prakash singh prem0prak...@gmail.com:
 Dear Meep users,
 I want to design two inclined fiber for coupling. In Cartesian system, I
 didn't get any angle parameter for design.  So whenever I am selecting
 block or cylinder, it comes parallel to X-Y axis not inclined. Could any
 one please  educate me to design such inclined geometry.
 Required structures is appended below.

 [image: Inline image 1]

 With Best Regards .

 Prem Prakash Singh
 IISc


___
meep-discuss mailing list
meep-discuss@ab-initio.mit.edu
http://ab-initio.mit.edu/cgi-bin/mailman/listinfo/meep-discuss