Re: [MBZ] Dang, here it is...

2020-12-14 Thread Karl Wittnebel via Mercedes
Easy 5k flip on BAT

On Mon, Dec 14, 2020, 6:44 PM Dwight Giles via Mercedes <
mercedes@okiebenz.com> wrote:

> That is as  rare as a hen's pecker.
>
> Dwight Giles Jr.
> Wickford RI
>
> On Mon, Dec 14, 2020, 1:06 PM OK Don via Mercedes 
> wrote:
>
> > It has the rare 5 cylinder 240D engine ...
> >
> > On Mon, Dec 14, 2020 at 10:42 AM Andrew Strasfogel via Mercedes <
> > mercedes@okiebenz.com> wrote:
> >
> > > Not expensive if the sophisticated anti-theft hardware conveys with the
> > > car.
> > >
> > > On Sun, Dec 13, 2020 at 7:43 PM Kaleb Striplin via Mercedes <
> > > mercedes@okiebenz.com> wrote:
> > >
> > > > 1977 MERCEDES 240D
> > > >
> > > >
> > > >
> > >
> >
> https://dallas.craigslist.org/dal/cto/d/dallas-1977-mercedes-240d/7246641547.html
> > > >
> > > >
> > > > Sent from my iPhone
> > > >
> > > > ___
> > > > http://www.okiebenz.com
> > > >
> > > > To search list archives http://www.okiebenz.com/archive/
> > > >
> > > > To Unsubscribe or change delivery options go to:
> > > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > > >
> > > >
> > > ___
> > > http://www.okiebenz.com
> > >
> > > To search list archives http://www.okiebenz.com/archive/
> > >
> > > To Unsubscribe or change delivery options go to:
> > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > >
> > >
> >
> > --
> > OK Don
> >
> > "Whenever you find yourself on the side of the majority, it is time to
> > pause and reflect." Mark Twain
> >
> > “Basic research is what I’m doing when I don’t know what I am doing.”
> > Wernher
> > Von Braun
> > 2013 F150, 18 mpg
> > 2017 Subaru Legacy, 30 mpg
> > 1957 C182A, 12 mpg - but at 150 mph!
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> >
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Dang, here it is...

2020-12-14 Thread Dwight Giles via Mercedes
That is as  rare as a hen's pecker.

Dwight Giles Jr.
Wickford RI

On Mon, Dec 14, 2020, 1:06 PM OK Don via Mercedes 
wrote:

> It has the rare 5 cylinder 240D engine ...
>
> On Mon, Dec 14, 2020 at 10:42 AM Andrew Strasfogel via Mercedes <
> mercedes@okiebenz.com> wrote:
>
> > Not expensive if the sophisticated anti-theft hardware conveys with the
> > car.
> >
> > On Sun, Dec 13, 2020 at 7:43 PM Kaleb Striplin via Mercedes <
> > mercedes@okiebenz.com> wrote:
> >
> > > 1977 MERCEDES 240D
> > >
> > >
> > >
> >
> https://dallas.craigslist.org/dal/cto/d/dallas-1977-mercedes-240d/7246641547.html
> > >
> > >
> > > Sent from my iPhone
> > >
> > > ___
> > > http://www.okiebenz.com
> > >
> > > To search list archives http://www.okiebenz.com/archive/
> > >
> > > To Unsubscribe or change delivery options go to:
> > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > >
> > >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> >
>
> --
> OK Don
>
> "Whenever you find yourself on the side of the majority, it is time to
> pause and reflect." Mark Twain
>
> “Basic research is what I’m doing when I don’t know what I am doing.”
> Wernher
> Von Braun
> 2013 F150, 18 mpg
> 2017 Subaru Legacy, 30 mpg
> 1957 C182A, 12 mpg - but at 150 mph!
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Might be worth the asking price

2020-12-14 Thread Buggered Benzmail via Mercedes
It’s marked for a good stack

--FT
Sent from iPhone

> On Dec 14, 2020, at 9:16 PM, Kaleb Striplin via Mercedes 
>  wrote:
> 
> https://www.facebook.com/marketplace/item/309021239680210/
> 
> 
> Sent from my iPhone
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Might be worth the asking price

2020-12-14 Thread Kaleb Striplin via Mercedes
https://www.facebook.com/marketplace/item/309021239680210/


Sent from my iPhone

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Wagon

2020-12-14 Thread Andrew Strasfogel via Mercedes
Wonder what makes it a "project".

On Mon, Dec 14, 2020 at 5:20 PM Kaleb Striplin via Mercedes <
mercedes@okiebenz.com> wrote:

> https://www.facebook.com/marketplace/item/403232907396079/
>
>
> Sent from my iPhone
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread Rick Knoble via Mercedes
I like to cycle heat and cold on a rusted part. Mapp torch, then spritzer with 
ice water. Repeat three or four times. Maybe the last time it's hot, hold a 
birthday candle to the threads.

Rick
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread Randy Bennell via Mercedes
Can you post a photo or two so that we can see what you are up against? 
That might help with suggestions.


RB

On 14/12/2020 12:51 PM, Mitch Haley via Mercedes wrote:
The rod end is rusted onto the tie rod and won't unscrew, at least not 
to the holding power of a 15mm open end wrench on the rod, or a 10" 
vice grip. My baby pipe wrench, with jaws thin enough to put on the 
little bit of rod that's exposed, had less grip than the vice grips.


I can try heating it, but the rubber bellows over the inner rod end 
puts a limit on that.


Any brilliant ideas for getting the rod end off the rod?
As I was typing this, I wondered if the wrench flats were wide enough 
for two 15mm open ends.

Will try that next, along with a bit of heat.
Wish I had some Kroil handy instead of this Liquid Wrench I soaked it 
in yesterday. 



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Wagon

2020-12-14 Thread Kaleb Striplin via Mercedes
https://www.facebook.com/marketplace/item/403232907396079/


Sent from my iPhone

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread Meade Dillon via Mercedes
If you've got the time to mess with it, sounds like you can try the
wet washcloths and acetylene torch, and then if you melt the bellows,
you get the kit to replace that.  If the blue wrench works, you can
install your new tie rod end, and if the blue wrench doesn't break the
rust free, you buy the inner rod end and boot and replace the whole
works.

Max Dillon
Charleston SC


Dec 14, 2020 4:52:11 PM Mitch Haley via Mercedes :


>
> My options are pretty much down to:
> Keep pouring penetrating oil on it, warming it with a heat gun, and praying.
>
> Try to break it off with a nut splitter (not intended for nuts that are 
> inches long).
>
> Buy the $86 tool from MAC or Snappy and praying it does the job. (a lot of 
> money to pay for a one of a kind job)
> https://shop.snapon.com/product/Tie-Rod-Adjusting-Tools/Tie-Rod-Adjusting-Wrench/YA2223
>
> Buy an inner rod end and boot, and replace everything, thereby avoiding 
> taking the old parts apart.
>
> Cut the rod end body off, put a 21mm deep well on it, and try to rattle 
> wrench it while holding the rod with Vice Grips.
>
> Acetylene and wet washcloths. The problem with that is getting enough wetted 
> area on the very short rod.
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread Mitch Haley via Mercedes



My options are pretty much down to:
Keep pouring penetrating oil on it, warming it with a heat gun, and 
praying.


Try to break it off with a nut splitter (not intended for nuts that are 
inches long).


Buy the $86 tool from MAC or Snappy and praying it does the job. (a lot 
of money to pay for a one of a kind job)

https://shop.snapon.com/product/Tie-Rod-Adjusting-Tools/Tie-Rod-Adjusting-Wrench/YA2223

Buy an inner rod end and boot, and replace everything, thereby avoiding 
taking the old parts apart.


Cut the rod end body off, put a 21mm deep well on it, and try to rattle 
wrench it while holding the rod with Vice Grips.


Acetylene and wet washcloths. The problem with that is getting enough 
wetted area on the very short rod.


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Dang, here it is...

2020-12-14 Thread Max Dillon via Mercedes
I'm with Randy, just go get it already.

Max Dillon
Charleston SC


Dec 14, 2020 3:28:34 PM Randy Bennell via Mercedes :

> On 13/12/2020 6:42 PM, Kaleb Striplin via Mercedes wrote:
>> 1977 MERCEDES 240D
>> 
>> https://dallas.craigslist.org/dal/cto/d/dallas-1977-mercedes-240d/7246641547.html
>> 
>> 
> Go get it. Call it your Christmas present. The one you want does not come 
> along all that often.
> 
> You have enough others that you don't truly care about to sell to pay for 
> this one that you want.
> 
> RB
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] FüKNMöV3N

2020-12-14 Thread Max Dillon via Mercedes
Yeah, if I were in the market for another car, I'd be sorely tempted to get 
such a hot rod.

Max Dillon
Charleston SC


Dec 14, 2020 3:55:31 PM Dan Penoff via Mercedes :

> Very nice. Would be even better with interior and engine compartment pictures.
> 
> -D
> 
>> On Dec 14, 2020, at 3:44 PM, Floyd Thursby via Mercedes 
>>  wrote:
>> 
>> https://www.facebook.com/marketplace/item/2499738076987026/?ref=search_code=undefined
>> 
>> 2002 Mercedes-Benz E-Class E 55 AMG Sedan 4D
>> $5,500
>> Vehicles 
>> Listed 19 hours ago in Raleigh, NC 
>> 
>> 
>> 
>>   About This Vehicle…
>> 
>> Driven 195,000 miles
>> Automatic transmission
>> Exterior color: Silver · Interior color: Charcoal
>> Fuel type: Gasoline
>> 15.0 MPG city · 22.0 MPG highway · 18.0 MPG combined
>> 
>> 
>>   Seller's description…
>> 
>> Very rare e55
>> 
>> -- 
>> --FT
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread G Mann via Mercedes
Presuming I understand your problem, I offer this work around.

Jack up and support the front of car, remove wheel for access [if memory
serves, rod end that came apart was RH?]

Turn steering wheel to the extreme travel limit to the broken side. then
push the rubber boot back along the tie rod to collapse it as much as
possible, secure it in place with a tie wrap around the tie rod to keep it
from extending on its own.
[you may need to insert a small screwdriver at the rod end of the boot and
spray some lube on the rubber to get it to slide back]
Having gained as much distance from the area to be heated as possible, find
a piece of sheet metal [anything handy will do] and make a heat shield of
it by cutting a slot that will slide over the tie rod, think the top of a
gallon coffee can with a slot cut in it.

Then... heat the offending, rusted, locked on tie rod end with a torch to
break the rust bond and remove it. As much as possible, keep the torch
flame directed away from the rubber boot.

Good luck !



On Mon, Dec 14, 2020 at 1:44 PM OK Don via Mercedes 
wrote:

> Back in the day of Rusty, it was reasonable to buy the whole tie rod with
> ends already installed. I did that for W115 and W107 cars ...
>
> On Mon, Dec 14, 2020 at 12:52 PM Mitch Haley via Mercedes <
> mercedes@okiebenz.com> wrote:
>
> > The rod end is rusted onto the tie rod and won't unscrew, at least not
> > to the holding power of a 15mm open end wrench on the rod, or a 10" vice
> > grip. My baby pipe wrench, with jaws thin enough to put on the little
> > bit of rod that's exposed, had less grip than the vice grips.
> >
> > I can try heating it, but the rubber bellows over the inner rod end puts
> > a limit on that.
> >
> > Any brilliant ideas for getting the rod end off the rod?
> > As I was typing this, I wondered if the wrench flats were wide enough
> > for two 15mm open ends.
> > Will try that next, along with a bit of heat.
> > Wish I had some Kroil handy instead of this Liquid Wrench I soaked it in
> > yesterday.
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> >
>
> --
> OK Don
>
> "Whenever you find yourself on the side of the majority, it is time to
> pause and reflect." Mark Twain
>
> “Basic research is what I’m doing when I don’t know what I am doing.”
> Wernher
> Von Braun
> 2013 F150, 18 mpg
> 2017 Subaru Legacy, 30 mpg
> 1957 C182A, 12 mpg - but at 150 mph!
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread Max Dillon via Mercedes
Don, I think Mitch's car has rack and pinion, not recirculating ball, so inner 
end of the rod is different.

Mitch, I like the water soaked rag idea, I've used that several times when 
brazing copper tubing and didn't want to destroy the seals in the valve just 
inches away from the joint.  Heat the rusty joint red hot at the far end, the 
water soaked rag will protect the bellows end.  I'd position the rag so mostly 
on the metal part of the rod near the bellows, and keep it dripping wet if 
possible.

Max Dillon
Charleston SC


Dec 14, 2020 3:44:06 PM OK Don via Mercedes :

> Back in the day of Rusty, it was reasonable to buy the whole tie rod with
> ends already installed. I did that for W115 and W107 cars ...
> 
> On Mon, Dec 14, 2020 at 12:52 PM Mitch Haley via Mercedes <
> mercedes@okiebenz.com> wrote:
> 
>> The rod end is rusted onto the tie rod and won't unscrew, at least not
>> to the holding power of a 15mm open end wrench on the rod, or a 10" vice
>> grip. My baby pipe wrench, with jaws thin enough to put on the little
>> bit of rod that's exposed, had less grip than the vice grips.
>> 
>> I can try heating it, but the rubber bellows over the inner rod end puts
>> a limit on that.
>> 
>> Any brilliant ideas for getting the rod end off the rod?
>> As I was typing this, I wondered if the wrench flats were wide enough
>> for two 15mm open ends.
>> Will try that next, along with a bit of heat.
>> Wish I had some Kroil handy instead of this Liquid Wrench I soaked it in
>> yesterday.
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
> 
> -- 
> OK Don
> 
> "Whenever you find yourself on the side of the majority, it is time to
> pause and reflect." Mark Twain
> 
> “Basic research is what I’m doing when I don’t know what I am doing.”  Wernher
> Von Braun
> 2013 F150, 18 mpg
> 2017 Subaru Legacy, 30 mpg
> 1957 C182A, 12 mpg - but at 150 mph!
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] FüKNMöV3N

2020-12-14 Thread Dan Penoff via Mercedes
Very nice. Would be even better with interior and engine compartment pictures.

-D

> On Dec 14, 2020, at 3:44 PM, Floyd Thursby via Mercedes 
>  wrote:
> 
> https://www.facebook.com/marketplace/item/2499738076987026/?ref=search_code=undefined
> 
> 2002 Mercedes-Benz E-Class E 55 AMG Sedan 4D
> $5,500
> Vehicles 
> Listed 19 hours ago in Raleigh, NC 
> 
> 
> 
>   About This Vehicle…
> 
> Driven 195,000 miles
> Automatic transmission
> Exterior color: Silver · Interior color: Charcoal
> Fuel type: Gasoline
> 15.0 MPG city · 22.0 MPG highway · 18.0 MPG combined
> 
> 
>   Seller's description…
> 
> Very rare e55
> 
> -- 
> --FT
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread Dan Penoff via Mercedes
This is in an ML, which has a little different configuration as it’s rack and 
pinion, not recirculating ball/Pitman arm.

The tie rod is two pieces, with the ball joint and threaded piece one part, and 
another threaded rod that connects inside the steering rack, how exactly I 
forget. For that matter, the part of the rod in the steering rack might not be 
serviceable separately, I don’t recall.

The tie rod itself is pretty cheap in the aftermarket, like $25 or thereabouts. 
With it disconnected from the steering rack, you can remove and replace the 
seal (bellows) on the rack without a lot of difficulty. It’s a little tight, 
but can be done. What you can’t do on the steering rack without a major 
undertaking, is replace the steering rack mounts, which are common failure item 
by now, unfortunately. The rack is installed tightly between the frame and 
drive train, and is near impossible to get to. I think that’s a four hour flat 
rate job.

-D

> On Dec 14, 2020, at 2:29 PM, OK Don via Mercedes  
> wrote:
> 
> Back in the day of Rusty, it was reasonable to buy the whole tie rod with
> ends already installed. I did that for W115 and W107 cars ...
> 
> On Mon, Dec 14, 2020 at 12:52 PM Mitch Haley via Mercedes <
> mercedes@okiebenz.com> wrote:
> 
>> The rod end is rusted onto the tie rod and won't unscrew, at least not
>> to the holding power of a 15mm open end wrench on the rod, or a 10" vice
>> grip. My baby pipe wrench, with jaws thin enough to put on the little
>> bit of rod that's exposed, had less grip than the vice grips.
>> 
>> I can try heating it, but the rubber bellows over the inner rod end puts
>> a limit on that.
>> 
>> Any brilliant ideas for getting the rod end off the rod?
>> As I was typing this, I wondered if the wrench flats were wide enough
>> for two 15mm open ends.
>> Will try that next, along with a bit of heat.
>> Wish I had some Kroil handy instead of this Liquid Wrench I soaked it in
>> yesterday.
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
> 
> -- 
> OK Don
> 
> "Whenever you find yourself on the side of the majority, it is time to
> pause and reflect." Mark Twain
> 
> “Basic research is what I’m doing when I don’t know what I am doing.”  Wernher
> Von Braun
> 2013 F150, 18 mpg
> 2017 Subaru Legacy, 30 mpg
> 1957 C182A, 12 mpg - but at 150 mph!
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] FüKNMöV3N

2020-12-14 Thread Floyd Thursby via Mercedes

https://www.facebook.com/marketplace/item/2499738076987026/?ref=search_code=undefined

2002 Mercedes-Benz E-Class E 55 AMG Sedan 4D
$5,500
Vehicles 
Listed 19 hours ago in Raleigh, NC 




   About This Vehicle…

Driven 195,000 miles
Automatic transmission
Exterior color: Silver · Interior color: Charcoal
Fuel type: Gasoline
15.0 MPG city · 22.0 MPG highway · 18.0 MPG combined


   Seller's description…

Very rare e55

--
--FT

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread OK Don via Mercedes
Back in the day of Rusty, it was reasonable to buy the whole tie rod with
ends already installed. I did that for W115 and W107 cars ...

On Mon, Dec 14, 2020 at 12:52 PM Mitch Haley via Mercedes <
mercedes@okiebenz.com> wrote:

> The rod end is rusted onto the tie rod and won't unscrew, at least not
> to the holding power of a 15mm open end wrench on the rod, or a 10" vice
> grip. My baby pipe wrench, with jaws thin enough to put on the little
> bit of rod that's exposed, had less grip than the vice grips.
>
> I can try heating it, but the rubber bellows over the inner rod end puts
> a limit on that.
>
> Any brilliant ideas for getting the rod end off the rod?
> As I was typing this, I wondered if the wrench flats were wide enough
> for two 15mm open ends.
> Will try that next, along with a bit of heat.
> Wish I had some Kroil handy instead of this Liquid Wrench I soaked it in
> yesterday.
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>

-- 
OK Don

"Whenever you find yourself on the side of the majority, it is time to
pause and reflect." Mark Twain

“Basic research is what I’m doing when I don’t know what I am doing.”  Wernher
Von Braun
2013 F150, 18 mpg
2017 Subaru Legacy, 30 mpg
1957 C182A, 12 mpg - but at 150 mph!
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Dang, here it is...

2020-12-14 Thread Randy Bennell via Mercedes

On 13/12/2020 6:42 PM, Kaleb Striplin via Mercedes wrote:

1977 MERCEDES 240D

https://dallas.craigslist.org/dal/cto/d/dallas-1977-mercedes-240d/7246641547.html


Go get it. Call it your Christmas present. The one you want does not 
come along all that often.


You have enough others that you don't truly care about to sell to pay 
for this one that you want.


RB


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Fwd: 1981 Mercedes 240 Diesel engine, & Standard Transmission

2020-12-14 Thread G Mann via Mercedes
I would buy it in a heartbeat just for the manual trans and clutch / brake
pedals to swap into a 300D, if it were not so far away.
The rusted out body... meah... scrap it.  Transport costs would be too
much..

On Mon, Dec 14, 2020 at 10:33 AM Frederick Moir via Mercedes <
mercedes@okiebenz.com> wrote:

> -- Forwarded message -
> From: 
> Date: Mon, Dec 14, 2020 at 11:53 AM
> Subject: 1981 Mercedes 240 Diesel engine, & Standard Transmission
> To: 
>
>
> fred4s...@gmail.com forwarded you this from craigslist:
> --
> 1981 Mercedes 240 Diesel engine, & Standard Transmission
>
>
> https://maine.craigslist.org/pts/d/thorndike-1981-mercedes-240-diesel/7238681804.html
> --
>
> *Please go to the preferences page
> <
> https://accounts.craigslist.org/eafprefs/U2FsdGVkX18xOTEwNjE5MQxVHtacNBs6dI1FZybgDwjkkaVD22MFNReGFAJGo7JdYtdZ1r0D6X1ZRDB23GI79A
> >
> if you don't want to receive email-a-friend messages in the future.*
>
>
> --
> Fred Moir
> Lynn MA
> Diesel preferred
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread Dan Penoff via Mercedes
The boot that goes on the steering rack is sold by the dealer in a kit form 
with a tube of grease and a new clamp pretty cheaply, like under $20. I know 
because one of mine was torn and I replaced it along with the tie rod because 
the ball joint seal on the tie rod was bad, too.

-D

> On Dec 14, 2020, at 1:51 PM, Mitch Haley via Mercedes  
> wrote:
> 
> The rod end is rusted onto the tie rod and won't unscrew, at least not to the 
> holding power of a 15mm open end wrench on the rod, or a 10" vice grip. My 
> baby pipe wrench, with jaws thin enough to put on the little bit of rod 
> that's exposed, had less grip than the vice grips.
> 
> I can try heating it, but the rubber bellows over the inner rod end puts a 
> limit on that.
> 
> Any brilliant ideas for getting the rod end off the rod?
> As I was typing this, I wondered if the wrench flats were wide enough for two 
> 15mm open ends.
> Will try that next, along with a bit of heat.
> Wish I had some Kroil handy instead of this Liquid Wrench I soaked it in 
> yesterday.
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread Allan Streib via Mercedes
Mitch Haley via Mercedes  writes:

> Wish I had some Kroil handy instead of this Liquid Wrench I soaked it
> in yesterday.

If you have acetone, try mixing up a little with some ATF and use that
as a penetrant.

Allan

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Tie rod end removal

2020-12-14 Thread Rick Knoble via Mercedes
Soak a rag in ice water and wrap it around the tie rod just ahead of the rubber 
boot on the rack to act as a heat sink. You might be able to get more heat into 
the tie rod end that way. Also, once it's hot, apply candle wax (birthday 
candle) to the threads and capillary action with wick it into the rusted part.


Rick
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Tie rod end removal

2020-12-14 Thread Mitch Haley via Mercedes
The rod end is rusted onto the tie rod and won't unscrew, at least not 
to the holding power of a 15mm open end wrench on the rod, or a 10" vice 
grip. My baby pipe wrench, with jaws thin enough to put on the little 
bit of rod that's exposed, had less grip than the vice grips.


I can try heating it, but the rubber bellows over the inner rod end puts 
a limit on that.


Any brilliant ideas for getting the rod end off the rod?
As I was typing this, I wondered if the wrench flats were wide enough 
for two 15mm open ends.

Will try that next, along with a bit of heat.
Wish I had some Kroil handy instead of this Liquid Wrench I soaked it in 
yesterday.


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] very nice 300SD

2020-12-14 Thread Buggered Benzmail via Mercedes
You are channeling BaT 

--FT
Sent from iPhone

> On Dec 14, 2020, at 11:59 AM, Dan Penoff via Mercedes  
> wrote:
> 
> And one must accept that unfortunately, the majority of these cars were 
> built in a somewhat boring color scheme. It’s a function of the times. That’s 
> something easily looked past, however, when enjoying their use.
> 
> -D
> 
>> On Dec 14, 2020, at 11:44 AM, Andrew Strasfogel via Mercedes 
>>  wrote:
>> 
>> With that color scheme you need an Rx for boredom.
>> 
>>> On Sun, Dec 13, 2020 at 1:57 PM Kaleb Striplin via Mercedes <
>>> mercedes@okiebenz.com> wrote:
>>> 
>>> 4 hours is not very far. I think the 300SDL is better though. A last year
>>> 617 would be nice.
>>> 
>>> Sent from my iPhone
>>> 
 On Dec 13, 2020, at 12:13 PM, Dan Penoff via Mercedes <
>>> mercedes@okiebenz.com> wrote:
 
 4 hour drive. No thanks.
 
 I will say that the 300SD (W126) was probably the best, if not one of
>>> the best, cars Mercedes ever built.
 
 -D
 
> On Dec 13, 2020, at 12:48 PM, Floyd Thursby via Mercedes <
>>> mercedes@okiebenz.com> wrote:
> 
> It's in JAX, not far, you should go get it
> 
> --FT
> 
>> On 12/13/20 12:34 PM, Dan Penoff via Mercedes wrote:
>> Dang. I would pay $3000 for that. It looks really clean.
>> 
>> -D
>> 
>>> On Dec 13, 2020, at 12:20 PM, Floyd Thursby via Mercedes <
>>> mercedes@okiebenz.com> wrote:
>>> 
>>> 
>>> https://www.facebook.com/marketplace/item/1029319877582636/?ref=search_code=undefined
>>> 
>>> --
>>> --FT
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> --
> --FT
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
 
 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] very nice 300SD

2020-12-14 Thread OK Don via Mercedes
Spray paint cans could be your friends ...

On Mon, Dec 14, 2020 at 11:46 AM Andrew Strasfogel via Mercedes <
mercedes@okiebenz.com> wrote:

> I have never purchased a vehicle with a color scheme that turns me off.  I
> am pretty tolerant, but on my sh*t list are black exterior and various
> blaah ext/int combinations, e.g. beige/beige , white/white, or dove
> gray/gray.  I also avoid blue with a red interior, which is thankfully
> quite rare.
>
> On Mon, Dec 14, 2020 at 11:59 AM Dan Penoff via Mercedes <
> mercedes@okiebenz.com> wrote:
>
> > And one must accept that unfortunately, the majority of these cars were
> > built in a somewhat boring color scheme. It’s a function of the times.
> > That’s something easily looked past, however, when enjoying their use.
> >
> > -D
> >
> > > On Dec 14, 2020, at 11:44 AM, Andrew Strasfogel via Mercedes <
> > mercedes@okiebenz.com> wrote:
> > >
> > > With that color scheme you need an Rx for boredom.
> > >
> > > On Sun, Dec 13, 2020 at 1:57 PM Kaleb Striplin via Mercedes <
> > > mercedes@okiebenz.com> wrote:
> > >
> > >> 4 hours is not very far. I think the 300SDL is better though. A last
> > year
> > >> 617 would be nice.
> > >>
> > >> Sent from my iPhone
> > >>
> > >>> On Dec 13, 2020, at 12:13 PM, Dan Penoff via Mercedes <
> > >> mercedes@okiebenz.com> wrote:
> > >>>
> > >>> 4 hour drive. No thanks.
> > >>>
> > >>> I will say that the 300SD (W126) was probably the best, if not one of
> > >> the best, cars Mercedes ever built.
> > >>>
> > >>> -D
> > >>>
> >  On Dec 13, 2020, at 12:48 PM, Floyd Thursby via Mercedes <
> > >> mercedes@okiebenz.com> wrote:
> > 
> >  It's in JAX, not far, you should go get it
> > 
> >  --FT
> > 
> > > On 12/13/20 12:34 PM, Dan Penoff via Mercedes wrote:
> > > Dang. I would pay $3000 for that. It looks really clean.
> > >
> > > -D
> > >
> > >> On Dec 13, 2020, at 12:20 PM, Floyd Thursby via Mercedes <
> > >> mercedes@okiebenz.com> wrote:
> > >>
> > >>
> > >>
> >
> https://www.facebook.com/marketplace/item/1029319877582636/?ref=search_code=undefined
> > >>
> > >> --
> > >> --FT
> > >>
> > >>
> > >> ___
> > >> http://www.okiebenz.com
> > >>
> > >> To search list archives http://www.okiebenz.com/archive/
> > >>
> > >> To Unsubscribe or change delivery options go to:
> > >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > >>
> > >
> > > ___
> > > http://www.okiebenz.com
> > >
> > > To search list archives http://www.okiebenz.com/archive/
> > >
> > > To Unsubscribe or change delivery options go to:
> > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > >
> >  --
> >  --FT
> > 
> > 
> >  ___
> >  http://www.okiebenz.com
> > 
> >  To search list archives http://www.okiebenz.com/archive/
> > 
> >  To Unsubscribe or change delivery options go to:
> >  http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > 
> > >>>
> > >>>
> > >>> ___
> > >>> http://www.okiebenz.com
> > >>>
> > >>> To search list archives http://www.okiebenz.com/archive/
> > >>>
> > >>> To Unsubscribe or change delivery options go to:
> > >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > >>>
> > >>
> > >>
> > >> ___
> > >> http://www.okiebenz.com
> > >>
> > >> To search list archives http://www.okiebenz.com/archive/
> > >>
> > >> To Unsubscribe or change delivery options go to:
> > >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > >>
> > >>
> > > ___
> > > http://www.okiebenz.com
> > >
> > > To search list archives http://www.okiebenz.com/archive/
> > >
> > > To Unsubscribe or change delivery options go to:
> > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > >
> >
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> >
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>

-- 
OK Don

"Whenever you find yourself on the side of the majority, it is time to
pause and reflect." Mark Twain

“Basic research is what I’m doing when I don’t know what I am doing.”  Wernher
Von Braun
2013 F150, 18 mpg
2017 Subaru Legacy, 30 mpg
1957 C182A, 12 mpg - but at 150 mph!
___
http://www.okiebenz.com

To search list archives 

Re: [MBZ] Dang, here it is...

2020-12-14 Thread OK Don via Mercedes
It has the rare 5 cylinder 240D engine ...

On Mon, Dec 14, 2020 at 10:42 AM Andrew Strasfogel via Mercedes <
mercedes@okiebenz.com> wrote:

> Not expensive if the sophisticated anti-theft hardware conveys with the
> car.
>
> On Sun, Dec 13, 2020 at 7:43 PM Kaleb Striplin via Mercedes <
> mercedes@okiebenz.com> wrote:
>
> > 1977 MERCEDES 240D
> >
> >
> >
> https://dallas.craigslist.org/dal/cto/d/dallas-1977-mercedes-240d/7246641547.html
> >
> >
> > Sent from my iPhone
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> >
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>

-- 
OK Don

"Whenever you find yourself on the side of the majority, it is time to
pause and reflect." Mark Twain

“Basic research is what I’m doing when I don’t know what I am doing.”  Wernher
Von Braun
2013 F150, 18 mpg
2017 Subaru Legacy, 30 mpg
1957 C182A, 12 mpg - but at 150 mph!
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] I'm going to spend $35k on one crappy picture

2020-12-14 Thread Andrew Strasfogel via Mercedes
If you need more pictures you don't deserve the car.

On Mon, Dec 14, 2020 at 8:53 AM Mitch Haley via Mercedes <
mercedes@okiebenz.com> wrote:

> On 2020-12-14 08:17, Floyd Thursby via Mercedes wrote:
> >
> https://charlotte.craigslist.org/cto/d/charlotte-rare-mercedes-benz-sl600/7246708644.html
>
> List yours for $25k
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Fwd: 1979 MERCEDES BENZ 240D

2020-12-14 Thread Mitch Haley via Mercedes

On 2020-12-14 12:48, Curt Raymond via Mercedes wrote:

Whew, its an auto. When I first started looking I thought "Must
resist" an auto 240D is a thing I do not want...



That's why Fred linked us to a $300 manny.

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Fwd: 1979 MERCEDES BENZ 240D

2020-12-14 Thread Curt Raymond via Mercedes
 Whew, its an auto. When I first started looking I thought "Must resist" an 
auto 240D is a thing I do not want...
-Curt

On Monday, December 14, 2020, 12:33:16 PM EST, Frederick Moir via Mercedes 
 wrote:  
 
 -- Forwarded message -
From: 
Date: Mon, Dec 14, 2020 at 11:47 AM
Subject: 1979 MERCEDES BENZ 240D
To: 


fred4s...@gmail.com forwarded you this from craigslist:
--
1979 MERCEDES BENZ 240D

https://maine.craigslist.org/cto/d/edgecomb-1979-mercedes-benz-240d/7238188538.html
--

*Please go to the preferences page

if you don't want to receive email-a-friend messages in the future.*


-- 
Fred Moir
Lynn MA
Diesel preferred
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

  
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] very nice 300SD

2020-12-14 Thread Andrew Strasfogel via Mercedes
I have never purchased a vehicle with a color scheme that turns me off.  I
am pretty tolerant, but on my sh*t list are black exterior and various
blaah ext/int combinations, e.g. beige/beige , white/white, or dove
gray/gray.  I also avoid blue with a red interior, which is thankfully
quite rare.

On Mon, Dec 14, 2020 at 11:59 AM Dan Penoff via Mercedes <
mercedes@okiebenz.com> wrote:

> And one must accept that unfortunately, the majority of these cars were
> built in a somewhat boring color scheme. It’s a function of the times.
> That’s something easily looked past, however, when enjoying their use.
>
> -D
>
> > On Dec 14, 2020, at 11:44 AM, Andrew Strasfogel via Mercedes <
> mercedes@okiebenz.com> wrote:
> >
> > With that color scheme you need an Rx for boredom.
> >
> > On Sun, Dec 13, 2020 at 1:57 PM Kaleb Striplin via Mercedes <
> > mercedes@okiebenz.com> wrote:
> >
> >> 4 hours is not very far. I think the 300SDL is better though. A last
> year
> >> 617 would be nice.
> >>
> >> Sent from my iPhone
> >>
> >>> On Dec 13, 2020, at 12:13 PM, Dan Penoff via Mercedes <
> >> mercedes@okiebenz.com> wrote:
> >>>
> >>> 4 hour drive. No thanks.
> >>>
> >>> I will say that the 300SD (W126) was probably the best, if not one of
> >> the best, cars Mercedes ever built.
> >>>
> >>> -D
> >>>
>  On Dec 13, 2020, at 12:48 PM, Floyd Thursby via Mercedes <
> >> mercedes@okiebenz.com> wrote:
> 
>  It's in JAX, not far, you should go get it
> 
>  --FT
> 
> > On 12/13/20 12:34 PM, Dan Penoff via Mercedes wrote:
> > Dang. I would pay $3000 for that. It looks really clean.
> >
> > -D
> >
> >> On Dec 13, 2020, at 12:20 PM, Floyd Thursby via Mercedes <
> >> mercedes@okiebenz.com> wrote:
> >>
> >>
> >>
> https://www.facebook.com/marketplace/item/1029319877582636/?ref=search_code=undefined
> >>
> >> --
> >> --FT
> >>
> >>
> >> ___
> >> http://www.okiebenz.com
> >>
> >> To search list archives http://www.okiebenz.com/archive/
> >>
> >> To Unsubscribe or change delivery options go to:
> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>  --
>  --FT
> 
> 
>  ___
>  http://www.okiebenz.com
> 
>  To search list archives http://www.okiebenz.com/archive/
> 
>  To Unsubscribe or change delivery options go to:
>  http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> >>>
> >>>
> >>> ___
> >>> http://www.okiebenz.com
> >>>
> >>> To search list archives http://www.okiebenz.com/archive/
> >>>
> >>> To Unsubscribe or change delivery options go to:
> >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>>
> >>
> >>
> >> ___
> >> http://www.okiebenz.com
> >>
> >> To search list archives http://www.okiebenz.com/archive/
> >>
> >> To Unsubscribe or change delivery options go to:
> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>
> >>
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Fwd: 1979 MERCEDES BENZ 240D

2020-12-14 Thread Kaleb Striplin via Mercedes
I wouldn’t mind having that. 

Sent from my iPhone

> On Dec 14, 2020, at 11:33 AM, Frederick Moir via Mercedes 
>  wrote:
> 
> -- Forwarded message -
> From: 
> Date: Mon, Dec 14, 2020 at 11:47 AM
> Subject: 1979 MERCEDES BENZ 240D
> To: 
> 
> 
> fred4s...@gmail.com forwarded you this from craigslist:
> --
> 1979 MERCEDES BENZ 240D
> 
> https://maine.craigslist.org/cto/d/edgecomb-1979-mercedes-benz-240d/7238188538.html
> --
> 
> *Please go to the preferences page
> 
> if you don't want to receive email-a-friend messages in the future.*
> 
> 
> -- 
> Fred Moir
> Lynn MA
> Diesel preferred
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Fwd: 1976 Mercedes 300 Diesel engine

2020-12-14 Thread Frederick Moir via Mercedes
-- Forwarded message -
From: 
Date: Mon, Dec 14, 2020 at 11:52 AM
Subject: 1976 Mercedes 300 Diesel engine
To: 


fred4s...@gmail.com forwarded you this from craigslist:
--
1976 Mercedes 300 Diesel engine

https://maine.craigslist.org/pts/d/thorndike-1976-mercedes-300-diesel/7238678864.html
--

*Please go to the preferences page

if you don't want to receive email-a-friend messages in the future.*


-- 
Fred Moir
Lynn MA
Diesel preferred
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Fwd: 1981 Mercedes 240 Diesel engine, & Standard Transmission

2020-12-14 Thread Frederick Moir via Mercedes
-- Forwarded message -
From: 
Date: Mon, Dec 14, 2020 at 11:53 AM
Subject: 1981 Mercedes 240 Diesel engine, & Standard Transmission
To: 


fred4s...@gmail.com forwarded you this from craigslist:
--
1981 Mercedes 240 Diesel engine, & Standard Transmission

https://maine.craigslist.org/pts/d/thorndike-1981-mercedes-240-diesel/7238681804.html
--

*Please go to the preferences page

if you don't want to receive email-a-friend messages in the future.*


-- 
Fred Moir
Lynn MA
Diesel preferred
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Fwd: 1979 MERCEDES BENZ 240D

2020-12-14 Thread Frederick Moir via Mercedes
-- Forwarded message -
From: 
Date: Mon, Dec 14, 2020 at 11:47 AM
Subject: 1979 MERCEDES BENZ 240D
To: 


fred4s...@gmail.com forwarded you this from craigslist:
--
1979 MERCEDES BENZ 240D

https://maine.craigslist.org/cto/d/edgecomb-1979-mercedes-benz-240d/7238188538.html
--

*Please go to the preferences page

if you don't want to receive email-a-friend messages in the future.*


-- 
Fred Moir
Lynn MA
Diesel preferred
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] very nice 300SD

2020-12-14 Thread Dan Penoff via Mercedes
And one must accept that unfortunately, the majority of these cars were built 
in a somewhat boring color scheme. It’s a function of the times. That’s 
something easily looked past, however, when enjoying their use.

-D

> On Dec 14, 2020, at 11:44 AM, Andrew Strasfogel via Mercedes 
>  wrote:
> 
> With that color scheme you need an Rx for boredom.
> 
> On Sun, Dec 13, 2020 at 1:57 PM Kaleb Striplin via Mercedes <
> mercedes@okiebenz.com> wrote:
> 
>> 4 hours is not very far. I think the 300SDL is better though. A last year
>> 617 would be nice.
>> 
>> Sent from my iPhone
>> 
>>> On Dec 13, 2020, at 12:13 PM, Dan Penoff via Mercedes <
>> mercedes@okiebenz.com> wrote:
>>> 
>>> 4 hour drive. No thanks.
>>> 
>>> I will say that the 300SD (W126) was probably the best, if not one of
>> the best, cars Mercedes ever built.
>>> 
>>> -D
>>> 
 On Dec 13, 2020, at 12:48 PM, Floyd Thursby via Mercedes <
>> mercedes@okiebenz.com> wrote:
 
 It's in JAX, not far, you should go get it
 
 --FT
 
> On 12/13/20 12:34 PM, Dan Penoff via Mercedes wrote:
> Dang. I would pay $3000 for that. It looks really clean.
> 
> -D
> 
>> On Dec 13, 2020, at 12:20 PM, Floyd Thursby via Mercedes <
>> mercedes@okiebenz.com> wrote:
>> 
>> 
>> https://www.facebook.com/marketplace/item/1029319877582636/?ref=search_code=undefined
>> 
>> --
>> --FT
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
 --
 --FT
 
 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] very nice 300SD

2020-12-14 Thread Andrew Strasfogel via Mercedes
With that color scheme you need an Rx for boredom.

On Sun, Dec 13, 2020 at 1:57 PM Kaleb Striplin via Mercedes <
mercedes@okiebenz.com> wrote:

> 4 hours is not very far. I think the 300SDL is better though. A last year
> 617 would be nice.
>
> Sent from my iPhone
>
> > On Dec 13, 2020, at 12:13 PM, Dan Penoff via Mercedes <
> mercedes@okiebenz.com> wrote:
> >
> > 4 hour drive. No thanks.
> >
> > I will say that the 300SD (W126) was probably the best, if not one of
> the best, cars Mercedes ever built.
> >
> > -D
> >
> >> On Dec 13, 2020, at 12:48 PM, Floyd Thursby via Mercedes <
> mercedes@okiebenz.com> wrote:
> >>
> >> It's in JAX, not far, you should go get it
> >>
> >> --FT
> >>
> >>> On 12/13/20 12:34 PM, Dan Penoff via Mercedes wrote:
> >>> Dang. I would pay $3000 for that. It looks really clean.
> >>>
> >>> -D
> >>>
>  On Dec 13, 2020, at 12:20 PM, Floyd Thursby via Mercedes <
> mercedes@okiebenz.com> wrote:
> 
> 
> https://www.facebook.com/marketplace/item/1029319877582636/?ref=search_code=undefined
> 
>  --
>  --FT
> 
> 
>  ___
>  http://www.okiebenz.com
> 
>  To search list archives http://www.okiebenz.com/archive/
> 
>  To Unsubscribe or change delivery options go to:
>  http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> >>>
> >>> ___
> >>> http://www.okiebenz.com
> >>>
> >>> To search list archives http://www.okiebenz.com/archive/
> >>>
> >>> To Unsubscribe or change delivery options go to:
> >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>>
> >> --
> >> --FT
> >>
> >>
> >> ___
> >> http://www.okiebenz.com
> >>
> >> To search list archives http://www.okiebenz.com/archive/
> >>
> >> To Unsubscribe or change delivery options go to:
> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>
> >
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Dang, here it is...

2020-12-14 Thread Andrew Strasfogel via Mercedes
Not expensive if the sophisticated anti-theft hardware conveys with the car.

On Sun, Dec 13, 2020 at 7:43 PM Kaleb Striplin via Mercedes <
mercedes@okiebenz.com> wrote:

> 1977 MERCEDES 240D
>
>
> https://dallas.craigslist.org/dal/cto/d/dallas-1977-mercedes-240d/7246641547.html
>
>
> Sent from my iPhone
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Rat nests included -- 1929 Mercedes-Benz ssk,$1,800

2020-12-14 Thread Andrew Strasfogel via Mercedes
Someone will snap this up.

On Sun, Dec 13, 2020 at 12:16 PM Floyd Thursby via Mercedes <
mercedes@okiebenz.com> wrote:

> I wonder if a 606 would drop in there
>
>
> https://www.facebook.com/marketplace/item/767689577163977/?ref=search_code=undefined
>
> --
> --FT
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] OT don't see these very often

2020-12-14 Thread Allan Streib via Mercedes
Sorta rusty but doesn't look too far gone to be saved

https://louisville.craigslist.org/cto/d/crestwood-nissan-patrol/7243579791.html

Allan

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] I'm going to spend $35k on one crappy picture

2020-12-14 Thread Mitch Haley via Mercedes

On 2020-12-14 08:17, Floyd Thursby via Mercedes wrote:

https://charlotte.craigslist.org/cto/d/charlotte-rare-mercedes-benz-sl600/7246708644.html


List yours for $25k

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] I'm going to spend $35k on one crappy picture

2020-12-14 Thread Floyd Thursby via Mercedes

https://charlotte.craigslist.org/cto/d/charlotte-rare-mercedes-benz-sl600/7246708644.html

--
--FT


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com