Re: [MBZ] '87 300SDL brake pulsing
On Wed, 14 Feb 2018 15:00:09 -0800 clay monroe via Mercedeswrote: > The rotor is not supposed to warp, so there is some other cause of the > issue. I replaced the disks and pads on our '90 E300D and the pedal pulsing stopped. Craig ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300SDL brake pulsing
> '84TD via Mercedes wrote: > My car recently starting a pulsing in the brake pedal. Had a > garage look at it and they recommended a rotor turning to remove > high spots. This worked fine for awhile, but the pulsing is now > back again. Can't say for sure, but that is the symptom of brakes that were not properly "bedded". http://www.stoptech.com/technical-support/technical-white-papers/-warped-brake-disc-and-other-myths Solution is to turn the rotors or replace them. While the S123 rotors can be turn, replacement isn't usually very expensive and is what Mercedes specifies. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300SDL brake pulsing
Common knowledge of Benz rotors is that they do not turn. Get fresh rotors and have the brake system checked out. The rotor is not supposed to warp, so there is some other cause of the issue. Other list folks are far more versed on this. clay 1974 450sl - Frosch - Two tone green 1986 SDL - Polei 1982 300 SD - Allen retired models- 2002 s430 - Victor, a Stately & well tailored crap 1976 300D - Blei Vanst - it looks silvery 1972 220D - Gump - She was green, simple and ran 1995 E300D - Gave her life to save me against a Dame in a SUV POS 1987 SDL - Beware Nigerian Scammers > On Feb 14, 2018, at 11:22 AM, Ralph,'84TD via Mercedes >wrote: > > My car recently starting a pulsing in the brake pedal. Had a garage look at > it and they recommended a rotor turning to remove high spots. This worked > fine for awhile, but the pulsing is now back again. Should I have the rotors > replaced or could it be something else. > Thanks > Ralph '87 300 SDL '84 300 CD > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300SDL brake pulsing
I actually found the wear gauge on an MB rotor just a year or so ago. Never knew they had them. If you haven’t seen one it’s just a little crescent shaped cutout on the edge of the rotor wear surface. -D > On Feb 14, 2018, at 2:25 PM, Kaleb C. Striplin via Mercedes >wrote: > > You don’t turn MB rotors. As you discovered it’s a waste of money. You just > need to replace the rotors. > > Sent from my iPhone > >> On Feb 14, 2018, at 1:22 PM, Ralph,'84TD via Mercedes >> wrote: >> >> My car recently starting a pulsing in the brake pedals. Had a garage look >> at it and they recommended a rotor turning to remove high spots. This >> worked fine for awhile, but the pulsing is now back again. Should I have >> the rotors replaced or could it be something else. >> Thanks >> Ralph '87 300 SDL '84 300 CD >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300SDL brake pulsing
Jabba --FT On 2/14/18 3:01 PM, Andrew Strasfogel via Mercedes wrote: These are but a few of the long list of awesome online parts shops with competitive pricing and excellent customer service. On Wed, Feb 14, 2018 at 2:59 PM, Craig via Mercedeswrote: On Wed, 14 Feb 2018 19:22:28 + (UTC) "Ralph,'84TD via Mercedes" wrote: Should I have the rotors replaced or could it be something else. Thanks Ralph You can get replacement disks at Rock Auto http://www.rockauto.com -- that's where I got them for our '90 E300D. They are cheaper than other places and have good service. http://www.rockauto.com/en/catalog/mercedes-benz,1986, 300sdl,3.0l+l6+diesel+turbocharged,1194072,brake+&+wheel+hub,rotor,1896 Craig ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- --FT ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300SDL brake pulsing
These are but a few of the long list of awesome online parts shops with competitive pricing and excellent customer service. On Wed, Feb 14, 2018 at 2:59 PM, Craig via Mercedeswrote: > On Wed, 14 Feb 2018 19:22:28 + (UTC) "Ralph,'84TD via Mercedes" > wrote: > > > Should I have the rotors replaced or could it be something else. > > Thanks Ralph > > You can get replacement disks at Rock Auto http://www.rockauto.com -- > that's where I got them for our '90 E300D. They are cheaper than other > places and have good service. > > http://www.rockauto.com/en/catalog/mercedes-benz,1986, > 300sdl,3.0l+l6+diesel+turbocharged,1194072,brake+&+wheel+hub,rotor,1896 > > > Craig > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300SDL brake pulsing
On Wed, 14 Feb 2018 19:22:28 + (UTC) "Ralph,'84TD via Mercedes"wrote: > Should I have the rotors replaced or could it be something else. > Thanks Ralph You can get replacement disks at Rock Auto http://www.rockauto.com -- that's where I got them for our '90 E300D. They are cheaper than other places and have good service. http://www.rockauto.com/en/catalog/mercedes-benz,1986,300sdl,3.0l+l6+diesel+turbocharged,1194072,brake+&+wheel+hub,rotor,1896 Craig ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300SDL brake pulsing
Or better yet importecautoparts.com Sent from my iPhone > On Feb 14, 2018, at 1:39 PM, Andrew Strasfogelwrote: > > Get a choice of brands + free shipping at www.autohausaz.com > >> On Wed, Feb 14, 2018 at 2:25 PM, Kaleb C. Striplin via Mercedes >> wrote: >> You don’t turn MB rotors. As you discovered it’s a waste of money. You just >> need to replace the rotors. >> >> Sent from my iPhone >> >> > On Feb 14, 2018, at 1:22 PM, Ralph,'84TD via Mercedes >> > wrote: >> > >> > My car recently starting a pulsing in the brake pedals. Had a garage look >> > at it and they recommended a rotor turning to remove high spots. This >> > worked fine for awhile, but the pulsing is now back again. Should I have >> > the rotors replaced or could it be something else. >> > Thanks >> > Ralph '87 300 SDL '84 300 CD >> > ___ >> > http://www.okiebenz.com >> > >> > To search list archives http://www.okiebenz.com/archive/ >> > >> > To Unsubscribe or change delivery options go to: >> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > >> >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300SDL brake pulsing
Get a choice of brands + free shipping at www.autohausaz.com On Wed, Feb 14, 2018 at 2:25 PM, Kaleb C. Striplin via Mercedes < mercedes@okiebenz.com> wrote: > You don’t turn MB rotors. As you discovered it’s a waste of money. You > just need to replace the rotors. > > Sent from my iPhone > > > On Feb 14, 2018, at 1:22 PM, Ralph,'84TD via Mercedes < > mercedes@okiebenz.com> wrote: > > > > My car recently starting a pulsing in the brake pedals. Had a garage > look at it and they recommended a rotor turning to remove high spots. This > worked fine for awhile, but the pulsing is now back again. Should I have > the rotors replaced or could it be something else. > > Thanks > > Ralph '87 300 SDL '84 300 CD > > ___ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300SDL brake pulsing
You don’t turn MB rotors. As you discovered it’s a waste of money. You just need to replace the rotors. Sent from my iPhone > On Feb 14, 2018, at 1:22 PM, Ralph,'84TD via Mercedes> wrote: > > My car recently starting a pulsing in the brake pedals. Had a garage look at > it and they recommended a rotor turning to remove high spots. This worked > fine for awhile, but the pulsing is now back again. Should I have the rotors > replaced or could it be something else. > Thanks > Ralph '87 300 SDL '84 300 CD > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] '87 300SDL brake pulsing
My car recently starting a pulsing in the brake pedal. Had a garage look at it and they recommended a rotor turning to remove high spots. This worked fine for awhile, but the pulsing is now back again. Should I have the rotors replaced or could it be something else. Thanks Ralph '87 300 SDL '84 300 CD ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com