Problem is getting to the lamp socket. The bulb clips to the lens which
comes out. Cant get to the wire connections without taking the outer cover
off.
Yeah I can drill a hole through the trunk and duckt tape a light to the car.
Remember I said the lights flicker on when wiggling the harness where it
goes inside the cavity.
On Jan 22, 2015 1:01 PM, Curly McLain via Mercedes mercedes@okiebenz.com
wrote:
Check the ground. Try cleaning and soldering the wire to the bulb
holder. If nothing else works, solder the wires to the bulb.
Or you could try finding an LED of about the right brightness and solder
it in. Use shrink tube filled with non-conductive grease, petroleum jelly
or RTV silicon form a gasket to keep water out of the joints.
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
All posts are the result of individual contributors and as such, those
individuals are responsible for the content of the post. The list owner
has no control over the content of the messages of each contributor.
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
All posts are the result of individual contributors and as such, those
individuals are responsible for the content of the post. The list owner has no
control over the content of the messages of each contributor.