Re: [MBZ] OT: Adhesvie recommendations needed
Liquid nails takes a long time to dry. Foam may fall off before it dries. Contact cement might dissolve the EPS, but it would be great otherwise. I might try 3m super trim spray adhesive if compatible with the foam. And you definitely want some foil on the back to keep the steel from radiating heat inward, if I understand correctly. On Thu, Jul 21, 2022, 4:59 PM Buggered Benzmail via Mercedes < mercedes@okiebenz.com> wrote: > There is stuff for that polystyrene, panel glue maybe? I don’t know what > might work on the plastic but I’m sure there is some product for it. > > --FT > Sent from iFōn > > > On Jul 21, 2022, at 7:46 PM, OK Don via Mercedes > wrote: > > > > I need to glue something like this: > > > https://www.lowes.com/pd/Tuftex-Multi-Wall-6mm-Panel-Clear-4-ft-x-8-ft-Corrugated-Polycarbonate-Plastic-Roof-Panel/1000689436 > > > > and this: > > > https://www.lowes.com/pd/Insulfoam-Common-0-5-in-x-4-ft-x-8-ft-Actual-0-5-in-x-4-ft-x-8-ft-1-R-1-9-Faced-Polystyrene-Garage-Door-Foam-Board-Insulation/3033278 > > > > to the inside of the hangar door - corrugated steel on a steel frame. > > > > It's too hot with some bare metal sections and the two large translucent > > fiberglass panels for light when the afternoon sun is shining on it. > > Most of the door has the foil backed foam, but the top ¼ doesn't. > > > > What would you use to glue it up - liquid nails, or ??? > > > > -- > > OK Don > > > > "Quality of life is inversely proportional to the amount of clothing you > > are wearing." > > > > "Whenever you find yourself on the side of the majority, it is time to > > pause and reflect." Mark Twain > > > > “Basic research is what I’m doing when I don’t know what I am doing.” > Wernher > > Von Braun > > 2013 F150, 18 mpg > > 2017 Subaru Legacy, 30 mpg > > 1957 C182A, 12 mpg - but at 150 mph! > > ___ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT: Adhesvie recommendations needed
There is stuff for that polystyrene, panel glue maybe? I don’t know what might work on the plastic but I’m sure there is some product for it. --FT Sent from iFōn > On Jul 21, 2022, at 7:46 PM, OK Don via Mercedes > wrote: > > I need to glue something like this: > https://www.lowes.com/pd/Tuftex-Multi-Wall-6mm-Panel-Clear-4-ft-x-8-ft-Corrugated-Polycarbonate-Plastic-Roof-Panel/1000689436 > > and this: > https://www.lowes.com/pd/Insulfoam-Common-0-5-in-x-4-ft-x-8-ft-Actual-0-5-in-x-4-ft-x-8-ft-1-R-1-9-Faced-Polystyrene-Garage-Door-Foam-Board-Insulation/3033278 > > to the inside of the hangar door - corrugated steel on a steel frame. > > It's too hot with some bare metal sections and the two large translucent > fiberglass panels for light when the afternoon sun is shining on it. > Most of the door has the foil backed foam, but the top ¼ doesn't. > > What would you use to glue it up - liquid nails, or ??? > > -- > OK Don > > "Quality of life is inversely proportional to the amount of clothing you > are wearing." > > "Whenever you find yourself on the side of the majority, it is time to > pause and reflect." Mark Twain > > “Basic research is what I’m doing when I don’t know what I am doing.” Wernher > Von Braun > 2013 F150, 18 mpg > 2017 Subaru Legacy, 30 mpg > 1957 C182A, 12 mpg - but at 150 mph! > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] OT: Adhesvie recommendations needed
I need to glue something like this: https://www.lowes.com/pd/Tuftex-Multi-Wall-6mm-Panel-Clear-4-ft-x-8-ft-Corrugated-Polycarbonate-Plastic-Roof-Panel/1000689436 and this: https://www.lowes.com/pd/Insulfoam-Common-0-5-in-x-4-ft-x-8-ft-Actual-0-5-in-x-4-ft-x-8-ft-1-R-1-9-Faced-Polystyrene-Garage-Door-Foam-Board-Insulation/3033278 to the inside of the hangar door - corrugated steel on a steel frame. It's too hot with some bare metal sections and the two large translucent fiberglass panels for light when the afternoon sun is shining on it. Most of the door has the foil backed foam, but the top ¼ doesn't. What would you use to glue it up - liquid nails, or ??? -- OK Don "Quality of life is inversely proportional to the amount of clothing you are wearing." "Whenever you find yourself on the side of the majority, it is time to pause and reflect." Mark Twain “Basic research is what I’m doing when I don’t know what I am doing.” Wernher Von Braun 2013 F150, 18 mpg 2017 Subaru Legacy, 30 mpg 1957 C182A, 12 mpg - but at 150 mph! ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
