Re: BeagleBone Black cereal
> > For what it is worth, I have two BBB's attached to a 2x12x12 block > > of wood (that's US wood inches, which translates to around the size > > of a hardbound book), with a five port switch and a seven port USB > > hub and a power strip screwed to it The BBB's get their power from > > the USB hub > > Don't use the USB connector to power the board, you will have problems > in the future. The BBB runs at 550mhz by default. Some drivers of u-boot > (not available yet in the official source code) will check if your board > is connected to the USB port or the real power connector. The driver > won't increase the cpu speed to 1ghz if you're using the USB connector. Why?
Re: BeagleBone Black cereal
On Oct 03 20:49:21, barry.grumb...@gmail.com wrote: > > Should the other end of the serial cable > > be the traditional RS-232 connector, > > or do serial/USB cables also work? > > Specifically, have you succesfully used any > > of the following with the BeagleBone Black? > > > > http://www.adafruit.com/products/954 > > I am successfully using this cable for my BBB. > black -> pin 1 > green -> pin 4 > white -> pin 5 > just like in the picture ,) I eventually got dx.com/p/arduino-pl2303hx-to-usb-ttl-upload-download-wire-black-100cm-199553 which works uplcom0 at uhub3 port 1 "Prolific Technology Inc. USB-Serial Controller" rev 1.10/3.00 addr 2 ucom0 at uplcom0
Re: Dovecot, TLS and Sieve.
On 2013-10-14, Maxime wrote: > Ok I found my mistake: the login class! > Now I dont know if my rules works, but at least I can connect to my > server with sieve enable! > > Thanks again Bernd and Vijay. > > > I found the issue in a previous thread (.1) which makes me read a... > README (.2). Ah good, I added openfiles-max in there as higher than openfiles-cur. (otherwise there would be tears when people upgrade to 5.4 without reading the upgrade notes :)
Re: Looking for good, small, canadian version laptop suggestions
On 2013-10-12 06:01, g.lister wrote: Interesting. I always feel that I am getting ripped off when buying something refurbished but then again I find my stuff which I bought many years ago still works and is easier to install stuff on (things I care about anyway) and now when looking around I find the new stuff has some major improvements which might come in handy (graphics, CPU, faster RAM) if I settle for the off the shelf stuff (Win* or OS X) but since I don't I have to poke around more to find what I like. I guess I should look as well on refurbished stuff and they come with a warranty, isn't it usually shorter? Replacing a hard drive and adding some more ram plus the right OS may make it into a livable solution. At the end one uses the software. My old Sony is kind of like that lots of things will never work, read webcam, but overall it has proven to be a well made laptop. I also got a more recent Dell, XPS I think, for my significant other and that one is also quite good it has sustained mass impact from some kid handling and is still running. As I said already, buying a consumer-grade laptop new from your local big box retailer generally gets you a one-year warranty. Whereas buying a refurb laptop from a reputable supplier (such as Dell Financial Services, in both Canada & USA) gets you a ... one-year warranty :-). You are not getting cutting-edge equipment. But in the case of running *anything* other than OS that comes loaded on the laptop, that's a *good* thing, not a bad thing. I can't even run Windows 7 properly on the vast majority of laptops I can buy at Best Buy today, why would I expect to be able to run OpenBSD? Whereas anything refurb is generally far enough behind the trailing edge that the drivers are already built-in to the OS. I can install Win7 onto a Latitude E4500 and 99% of the drivers will work out of the box. Maybe I don't get the absolute maximum set of functionality, but everything works. I can also install OpenBSD onto a Latitude E4500 and get the same level of functionality. (Assuming you connect to Ethernet at first, to auto-download the Broadcom wireless firmware during first boot.) Keep in mind that although you aren't getting the latest CPU, that's mostly irrelevant today - and especially so for OpenBSD. You aren't getting "ripped off" when buying from DFS, because they're only charging you (roughly) 1/n of the original price, where n = laptop_age_in_years. Those $299 deals they have for 3-year-old laptops are mostly for units that cost around $1500 brand new! Right now, DFS Canada has several laptops with 8GB of RAM for under $800. How much more would you like to put into it?!? Only the very newest laptops can take more than that anyway! Also, buying business-grade laptops is a sound investment because you don't have to replace them as often. In my experience, the average consumer-grade laptop (including Dell Inspiron and Lenovo IdeaPad) lasts one year, or maybe two if you don't carry it around and don't abuse it at all. The average business-grade laptop (Dell Latitude, Lenovo ThinkPad) lasts about three years under heavy use and abuse, and can last up to five years if handled gently. I do recommend switching out the HDD and installing an SSD just so you never have to worry about crashing the disk if you drop it. Also, a Core 2 Duo with an SSD and enough RAM (4Gb+) usually "feels" like a quad-core i7 with a 5400rpm HDD and 2Gb RAM... reinforcing my point about CPU horsepower, above. I *prefer* to buy refurb because I know I'm not going to get ripped open on the "cutting edge", especially when it comes to running various UNIXes on the hardware. Good luck with your quest, regardless. (FYI: that solar-powered laptop, while nifty, is unlikely to work 100% with OpenBSD - the components will likely be too new and support will be lacking. OTOH, the screenshots show Ubuntu Linux, so I could be wrong here.) -- -Adam Thompson athom...@athompso.net
Re: Thunderbird 24.0 and Firefox 24.0 spell checking broken?
On 10/14/13 19:29, Richard Toohey wrote: On 10/14/13 23:41, Fred wrote: Hi misc@ I recently upgraded thunderbird and firefox to 24 and since then spell checking has stopped working - in both applications - all words get underlined in with a red squiggle - I've added the en-GB language packs: port:fred ~> pkg_info|grep fire firefox-24.0p0 Mozilla web browser firefox-i18n-en-GB-24.0 en-GB language pack for Firefox port:fred ~> pkg_info|grep thun thunderbird-24.0p0 Mozilla e-mail, rss and usenet client thunderbird-i18n-en-GB-24.0 en-GB language pack for Thunderbird general.useragent.locale is set to en-GB I have the same problem if I set the language to en-US. Am I missing something obvious? I am about to delete both firefox and thunderbird profiles to see if that resolves the issue... Hi, Fred, It's been there a while - I haven't found a solution yet (also using amd64): http://marc.info/?l=openbsd-ports&m=137950359628970&w=2 I tried the spellchecker.dictionary_path but no difference. You get to the stage where it looks like everything should work - but it just doesn't. Cheers Fred [cut] Hi, Thanks for the pointer - I'll continue digging through ktrace to see if that give any clues - and I'll see if there's a bug in Mozilla's bug tracker. Cheers Fred
Re: Thunderbird 24.0 and Firefox 24.0 spell checking broken?
On 10/14/13 23:41, Fred wrote: Hi misc@ I recently upgraded thunderbird and firefox to 24 and since then spell checking has stopped working - in both applications - all words get underlined in with a red squiggle - I've added the en-GB language packs: port:fred ~> pkg_info|grep fire firefox-24.0p0 Mozilla web browser firefox-i18n-en-GB-24.0 en-GB language pack for Firefox port:fred ~> pkg_info|grep thun thunderbird-24.0p0 Mozilla e-mail, rss and usenet client thunderbird-i18n-en-GB-24.0 en-GB language pack for Thunderbird general.useragent.locale is set to en-GB I have the same problem if I set the language to en-US. Am I missing something obvious? I am about to delete both firefox and thunderbird profiles to see if that resolves the issue... Hi, Fred, It's been there a while - I haven't found a solution yet (also using amd64): http://marc.info/?l=openbsd-ports&m=137950359628970&w=2 I tried the spellchecker.dictionary_path but no difference. You get to the stage where it looks like everything should work - but it just doesn't. Cheers Fred [cut]
Re: Dovecot, TLS and Sieve.
Ok I found my mistake: the login class!
Now I dont know if my rules works, but at least I can connect to my
server with sieve enable!
Thanks again Bernd and Vijay.
I found the issue in a previous thread (.1) which makes me read a...
README (.2).
Finally I want to recommend the Michael W. Lucas's
"Absolute OpenBSD, 2nd Edition" book (.3) which is, I think, a must have
for every OpenBSD beginners.
Maxime
-
(1) http://marc.info/?l=openbsd-misc&m=134340250330920&w=2
(2)
http://www.openbsd.org/cgi-bin/cvsweb/ports/mail/dovecot/pkg/README-server?rev=1.1;content-type=text%2Fplain
(3) https://www.michaelwlucas.com/nonfiction/absolute-openbsd-2nd-edition
Le 14/10/2013 18:36, Maxime a écrit :
> Hello Bernd.
>
> Le 14/10/2013 08:26, Bernte a écrit :
>> Dear Maxime,
>>
>> I am running a very similar setup, without any problems running Sieve. I
>> have added my output of dovecot -n below, but perhaps you can see
>> anything that is different.
>>
>> Also, please have a look at the /var/dovecot directory. Perhaps there
>> are some permissions wrong. I have also added the output from my
>> configuration below.
>>
>> If you want to delta-debug, I am happy to provide any more information.
>>
>> Regards,
>> Bernd
>>
>
> I made my dovecot's configuration looks like yours and it's still not
> working. I'm going to be crazy! Especially as I guess I missed
> something, somewhere.
>
> I had a look to the /var/dovecot directory as you suggested but it seems
> fine too. Also I did a chmod a+r of my private key (and his parent
> directory) but nop, no change.
>
> Anyway your help is really appreciated.
>
>
> Off mailing-list a nice guy made me check my pf's configuration, but all
> ok (no filtering locally).
>
> # netstat -nat | grep LISTEN | grep -E "4190|2000"
> tcp 0 0 *.2000 *.*LISTEN
> tcp 0 0 *.4190 *.*LISTEN
> tcp6 0 0 *.2000 *.*LISTEN
> tcp6 0 0 *.4190 *.*LISTEN
>
> # telnet 91.121.65.29 4190 (same results for localhost or ipv6)
> Trying 91.121.65.29...
> Connected to 91.121.65.29.
> Escape character is '^]'.
> ^]
> telnet> quit
>
>
> Maxime
>
> -
>
> # 2.1.15: /etc/dovecot/dovecot.conf
> # OS: OpenBSD 5.3 amd64
> first_valid_uid = 1000
> managesieve_notify_capability = mailto
> managesieve_sieve_capability = fileinto reject envelope
> encoded-character vacation subaddress comparator-i;ascii-numeric
> relational regex imap4flags copy include variables body enotify
> environment mailbox date ihave
> mbox_write_locks = fcntl
> mmap_disable = yes
> namespace inbox {
> inbox = yes
> location =
> mailbox Drafts {
> special_use = \Drafts
> }
> mailbox Junk {
> special_use = \Junk
> }
> mailbox Sent {
> special_use = \Sent
> }
> mailbox "Sent Messages" {
> special_use = \Sent
> }
> mailbox Trash {
> special_use = \Trash
> }
> prefix =
> }
> passdb {
> driver = bsdauth
> }
> plugin {
> sieve = ~/.dovecot.sieve
> sieve_dir = ~/sieve
> }
> protocols = imap pop3 lmtp sieve
> service auth {
> user = $default_internal_user
> }
> service managesieve-login {
> inet_listener sieve {
> port = 4190
> }
> inet_listener sieve_deprecated {
> port = 2000
> }
> }
> ssl_ca = ssl_cert = ssl_key = userdb {
> driver = passwd
> }
> protocol lmtp {
> mail_plugins = sieve
> }
> protocol lda {
> mail_plugins = sieve
> }
> protocol imap {
> imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags
> }
> protocol pop3 {
> pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
> }
>
> ###
>
> # ll -a /var/dovecot/
>
>
> total 32
> drwxr-xr-x 4 root wheel 1024 Oct 14 18:22 .
> drwxr-xr-x 25 root wheel 512 Aug 24 19:20 ..
> srw--- 1 root wheel 0 Oct 14 18:19 anvil
> srw--- 1 root wheel 0 Oct 14 18:19 anvil-auth-penalty
> srw--- 1 root wheel 0 Oct 14 18:19 auth-client
> srw--- 1 _dovecot wheel 0 Oct 14 18:19 auth-login
> srw--- 1 root wheel 0 Oct 14 18:19 auth-master
> srw-rw-rw- 1 _dovecot wheel 0 Oct 14 18:19 auth-userdb
> srw--- 1 _dovecot wheel 0 Oct 14 18:19 auth-worker
> srw--- 1 root wheel 0 Oct 14 18:19 config
> srw--- 1 root wheel 0 Oct 14 18:19 dict
> srw--- 1 root wheel 0 Oct 14 18:19 director-admin
> srw--- 1 root wheel 0 Oct 14 18:19 director-userdb
> srw-rw-rw- 1 root wheel 0 Oct 14 18:19 dns-client
> srw--- 1 root wheel 0 Oct 14 18:19 doveadm-server
> lrwx-- 1 root wheel25 Oct 14 18:19 dovecot.conf ->
> /etc/dovecot/dovecot.conf
> drwxr-xr-x 2 root wheel 512 May 19 15:14 empty
> srw-rw-rw- 1 root wheel 0 Oct 14 18:19 index
Re: Dovecot, TLS and Sieve.
Hello Bernd.
Le 14/10/2013 08:26, Bernte a écrit :
> Dear Maxime,
>
> I am running a very similar setup, without any problems running Sieve. I
> have added my output of dovecot -n below, but perhaps you can see
> anything that is different.
>
> Also, please have a look at the /var/dovecot directory. Perhaps there
> are some permissions wrong. I have also added the output from my
> configuration below.
>
> If you want to delta-debug, I am happy to provide any more information.
>
> Regards,
> Bernd
>
I made my dovecot's configuration looks like yours and it's still not
working. I'm going to be crazy! Especially as I guess I missed
something, somewhere.
I had a look to the /var/dovecot directory as you suggested but it seems
fine too. Also I did a chmod a+r of my private key (and his parent
directory) but nop, no change.
Anyway your help is really appreciated.
Off mailing-list a nice guy made me check my pf's configuration, but all
ok (no filtering locally).
# netstat -nat | grep LISTEN | grep -E "4190|2000"
tcp 0 0 *.2000 *.*LISTEN
tcp 0 0 *.4190 *.*LISTEN
tcp6 0 0 *.2000 *.*LISTEN
tcp6 0 0 *.4190 *.*LISTEN
# telnet 91.121.65.29 4190 (same results for localhost or ipv6)
Trying 91.121.65.29...
Connected to 91.121.65.29.
Escape character is '^]'.
^]
telnet> quit
Maxime
-
# 2.1.15: /etc/dovecot/dovecot.conf
# OS: OpenBSD 5.3 amd64
first_valid_uid = 1000
managesieve_notify_capability = mailto
managesieve_sieve_capability = fileinto reject envelope
encoded-character vacation subaddress comparator-i;ascii-numeric
relational regex imap4flags copy include variables body enotify
environment mailbox date ihave
mbox_write_locks = fcntl
mmap_disable = yes
namespace inbox {
inbox = yes
location =
mailbox Drafts {
special_use = \Drafts
}
mailbox Junk {
special_use = \Junk
}
mailbox Sent {
special_use = \Sent
}
mailbox "Sent Messages" {
special_use = \Sent
}
mailbox Trash {
special_use = \Trash
}
prefix =
}
passdb {
driver = bsdauth
}
plugin {
sieve = ~/.dovecot.sieve
sieve_dir = ~/sieve
}
protocols = imap pop3 lmtp sieve
service auth {
user = $default_internal_user
}
service managesieve-login {
inet_listener sieve {
port = 4190
}
inet_listener sieve_deprecated {
port = 2000
}
}
ssl_ca =
/etc/dovecot/dovecot.conf
drwxr-xr-x 2 root wheel 512 May 19 15:14 empty
srw-rw-rw- 1 root wheel 0 Oct 14 18:19 indexer
srw--- 1 _dovecot wheel 0 Oct 14 18:19 indexer-worker
-rw-r--r-- 1 root wheel58 Oct 14 18:19 instances
srw--- 1 root wheel 0 Oct 14 18:19 ipc
srw-rw-rw- 1 root wheel 0 Oct 14 18:19 lmtp
srw--- 1 root wheel 0 Oct 14 18:19 log-errors
drwxr-x--- 2 root _dovenull 512 Oct 14 18:19 login
-rw--- 1 root wheel 6 Oct 14 18:19 master.pid
-rw-r--r-- 1 root wheel 133 Oct 14 18:19 mounts
srw--- 1 root wheel 0 Oct 14 18:19 replication-notify
prw--- 1 root wheel 0 Oct 14 18:19
replication-notify-fifo
srw--- 1 _dovecot wheel 0 Oct 14 18:19 replicator
-rw-r--r-- 1 root wheel 230 Oct 12 17:44 ssl-parameters.dat
srw--- 1 root wheel 0 Oct 14 18:19 stats
prw--- 1 root wheel 0 Oct 14 18:19 stats-mail
Re: Google: bug bounty for OpenSSH
Maxime Villard [m...@m00nbsd.net] wrote: > Hi, > just a news, if you are interested: > > https://www.google.com/about/appsecurity/patch-rewards/ > > Cool Yeah, OpenBSD and developers could have gotten a lot of payments over the years.
Thunderbird 24.0 and Firefox 24.0 spell checking broken?
Hi misc@ I recently upgraded thunderbird and firefox to 24 and since then spell checking has stopped working - in both applications - all words get underlined in with a red squiggle - I've added the en-GB language packs: port:fred ~> pkg_info|grep fire firefox-24.0p0 Mozilla web browser firefox-i18n-en-GB-24.0 en-GB language pack for Firefox port:fred ~> pkg_info|grep thun thunderbird-24.0p0 Mozilla e-mail, rss and usenet client thunderbird-i18n-en-GB-24.0 en-GB language pack for Thunderbird general.useragent.locale is set to en-GB I have the same problem if I set the language to en-US. Am I missing something obvious? I am about to delete both firefox and thunderbird profiles to see if that resolves the issue... Cheers Fred [1] dmesg: OpenBSD 5.4-current (GENERIC.MP) #68: Sat Oct 12 12:22:58 MDT 2013 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8447131648 (8055MB) avail mem = 8214147072 (7833MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xaafd (43 entries) bios0: vendor TOSHIBA version "Version 3.60" date 01/24/2012 bios0: TOSHIBA TOSHIBA acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG ASF! TCPA BOOT SLIC SSDT SSDT SSDT SSDT acpi0: wakeup devices LANC(S4) HDEF(S3) RP02(S4) PXSX(S4) RP04(S4) PXSX(S4) USBB(S4) USBC(S4) EHC1(S4) EHC2(S4) PWRB(S4) LID_(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2492.31 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.92 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.92 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.92 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf800, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEGP) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus 4 (RP03) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus 5 (RP05) acpiprt7 at acpi0: bus 6 (RP06) acpiprt8 at acpi0: bus 7 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PCIB) acpicpu0 at acpi0: C1, PSS acpicpu1 at acpi0: C1, PSS acpicpu2 at acpi0: C1, PSS acpicpu3 at acpi0: C1, PSS acpipwrres0 at acpi0: PDOC acpitz0 at acpi0: critical temperature is 102 degC acpitoshiba0 at acpi0 acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID_ acpibat0 at acpi0: BAT1 model "G71C000E4410" serial 001888 type Li-ION oem "0" acpidock0 at acpi0: DOCK not docked (0) cpu0: Enhanced SpeedStep 2492 MHz: speeds: 2501, 2500, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 intagp0 at vga1 agp0 at intagp0: aperture at 0xb000, size 0x1000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1366x768 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo com4: probed fifo d
