Hey list,
I know this error message has been handled earlier on this list, that post
did not contain any useful information for me though, so Im giving it another
try.
My setup is a OpenBSD 3.7 multi purpose "server" which acts as a
firewall/gateway/file server/whatnot. Then I have a workstation running
Debian (Linux 2.6.11) that mounts NFS shares from this server. The server
uses a fxp NIC, the workstation a VIA Rhine-II.
Now I don't really have any problems with NFS, it performs quite good, it's
just a bit annoying that this error message keeps filling up the logs. I have
not yet been able to get information on what error 55 really means, this
would probably be helpful as a start. I realize this might not even be a
problem with OpenBSD, but with Linux NFS, and if this is the case please
ignore this post.
Any help appreciated
Thanks,
Joel
$(cat /var/run/dmesg.boot)
OpenBSD 3.7 (GENERIC) #0: Wed Mar 30 00:04:04 CEST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 548 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
cpu0: disabling processor serial number
real mem = 402223104 (392796K)
avail mem = 359890944 (351456K)
using 4278 buffers containing 20213760 bytes (19740K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 07/19/01, BIOS32 rev. 0 @ 0xfd801
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1c50/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 1 function 0 "S3 Trio3D AGP" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, cha
nnel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 51369U3>
wd0: 16-sector PIO, LBA, 12949MB, 26520480 sectors
wd1 at pciide0 channel 0 drive 1: <MAXTOR 6L060J3>
wd1: 16-sector PIO, LBA, 57259MB, 117266688 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd2 at pciide0 channel 1 drive 0: <Maxtor 91826U4>
wd2: 16-sector PIO, LBA, 17418MB, 35673120 sectors
wd3 at pciide0 channel 1 drive 1: <Maxtor 6B200P0>
wd3: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd3(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 2 function 3 not configured
fxp0 at pci0 dev 3 function 0 "Intel 82557" rev 0x05, i82558: irq 11, address
00:06:29:b0:d1:96
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
xl0 at pci0 dev 20 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 10,
address 00:50:da:33:a3:d0
exphy0 at xl0 phy 24: 3Com internal media interface
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
wss1 at isapnp0 "Crystal Audio, CSC0100, , WSS/SB" port
0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS
4236B (vers 0)
audio0 at wss1
"Crystal Audio, CSC010F, , Disabled" at isapnp0 not configured
"Crystal Audio, CSC0110, , CTRL" at isapnp0 port 0x120/8 not configured
biomask fb45 netmask ff45 ttymask ffc7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
dkcsum: wd2 matched BIOS disk 82
dkcsum: wd3 matched BIOS disk 83
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
