Arrandale/Ironlake support in current.
Hi. I've been trying to get my laptop working (it is), but it generates alot of heat. I've read that thinkpad x201i is working good with apmd -C. And the fan is throttling down to a lower speed. So i read about the difference regarding x201 and x201i and noticed that the x201 model has turbo boost, could that be the thing that generates all this heat? is the Arrandale/ironlake supported on openbsd yet? This was the last i heard about that topic: http://comments.gmane.org/gmane.os.openbsd.misc/209482 --Johan Svensson
Re: CPU power consumption on thinkpad x201 on openbsd current
On 06/05/14 00:53, STeve Andre' wrote: On 06/04/14 17:08, Johan Svensson wrote: I'm trying to migrate from Linux to Openbsd on my laptop (thinkpad x201). The first problem that i came across was that the Cpu fanspeed was running constantly at 3500RPM. After the acpithinkpad.c patch from jcs (and i modified to make it work on the openbsd-current(link: http://exclude.se/patch/jcs_mod_by_js.diff) Another thing that i noticed is that the battery lifetime is really bad. In Linux i get around ~5,5 hours. In OpenBSD i get around 2 hours. when i ran : sysctl hw.sensors | grep -i consumption. the output of the cpu was 6W. in Linux it's around 1,5W. with: apmd -C and apmd -L it's the same. dmesg: http://exclude.se/openbsd/dmesg.txt Is there anyway to fix this? Regards Johan Svensson Take a look at hw.setperf in sysctl. I think you are running at the maximum cpu speed? On my 2.8GHz W500 I can run at 800, 1600, 2133 and 2801. 800MHz makes a huge difference. You have to try different values for setperf to see what happens. sysctl will also tell you the speed in hw.cpuspeed. --STeve Andre' This my output from sysctl and apm when running on the lowest clockspeed: # sysctl hw | grep -iE cpuspeed|setperf|fan|consumption hw.sensors.acpithinkpad0.fan0=1959 RPM hw.sensors.itherm0.power0=6.00 W (CPU power consumption) hw.cpuspeed=1199 hw.setperf=0 # apm Battery state: high, 70% remaining, 111 minutes life estimate A/C adapter state: not connected Performance adjustment mode: manual (1199 MHz) This is the output when i use apm -H: # sysctl hw | grep -iE cpuspeed|setperf|fan|consumption hw.sensors.acpithinkpad0.fan0=1972 RPM hw.sensors.itherm0.power0=6.00 W (CPU power consumption) hw.cpuspeed=2666 hw.setperf=100 # apm Battery state: high, 68% remaining, 107 minutes life estimate A/C adapter state: not connected Performance adjustment mode: manual (2666 MHz) The energy consumption is the same which is odd. --Johan
Re: CPU power consumption on thinkpad x201 on openbsd current
On 2014-06-05 11:09, David Coppa wrote: On Thu, Jun 5, 2014 at 10:53 AM, Johan Svensson open...@exclude.se wrote: This my output from sysctl and apm when running on the lowest clockspeed: # sysctl hw | grep -iE cpuspeed|setperf|fan|consumption hw.sensors.acpithinkpad0.fan0=1959 RPM hw.sensors.itherm0.power0=6.00 W (CPU power consumption) hw.cpuspeed=1199 hw.setperf=0 # apm Battery state: high, 70% remaining, 111 minutes life estimate A/C adapter state: not connected Performance adjustment mode: manual (1199 MHz) This is the output when i use apm -H: # sysctl hw | grep -iE cpuspeed|setperf|fan|consumption hw.sensors.acpithinkpad0.fan0=1972 RPM hw.sensors.itherm0.power0=6.00 W (CPU power consumption) hw.cpuspeed=2666 hw.setperf=100 # apm Battery state: high, 68% remaining, 107 minutes life estimate A/C adapter state: not connected Performance adjustment mode: manual (2666 MHz) The energy consumption is the same which is odd. Are you running with the latest bios (1.40-1.15) from Lenovo? Yes it is the latest bios. Hmmm. Smells like a bug, to me. But by changing hw.setperf your self you should be able to go to other speeds(?). And of course, the real test is to see if you get longer life at setperf 0. --STeve Andre' # sysctl hw | grep -iE cpuspeed|setperf|fan|consumption apm hw.sensors.acpithinkpad0.fan0=1965 RPM hw.sensors.itherm0.power0=6.00 W (CPU power consumption) hw.cpuspeed=1199 hw.setperf=0 Battery state: high, 57% remaining, 91 minutes life estimate A/C adapter state: not connected Performance adjustment mode: manual (1199 MHz) # It seems like that's the same output. If the processor throttles down it should also consume less energy, but it says 6W all the time though.
Re: CPU power consumption on thinkpad x201 on openbsd current
On 2014-06-05 20:43, Mike Larkin wrote: On Thu, Jun 05, 2014 at 10:53:38AM +0200, Johan Svensson wrote: On 06/05/14 00:53, STeve Andre' wrote: On 06/04/14 17:08, Johan Svensson wrote: I'm trying to migrate from Linux to Openbsd on my laptop (thinkpad x201). The first problem that i came across was that the Cpu fanspeed was running constantly at 3500RPM. After the acpithinkpad.c patch from jcs (and i modified to make it work on the openbsd-current(link: http://exclude.se/patch/jcs_mod_by_js.diff) Another thing that i noticed is that the battery lifetime is really bad. In Linux i get around ~5,5 hours. In OpenBSD i get around 2 hours. when i ran : sysctl hw.sensors | grep -i consumption. the output of the cpu was 6W. in Linux it's around 1,5W. with: apmd -C and apmd -L it's the same. dmesg: http://exclude.se/openbsd/dmesg.txt Is there anyway to fix this? Regards Johan Svensson Take a look at hw.setperf in sysctl. I think you are running at the maximum cpu speed? On my 2.8GHz W500 I can run at 800, 1600, 2133 and 2801. 800MHz makes a huge difference. You have to try different values for setperf to see what happens. sysctl will also tell you the speed in hw.cpuspeed. --STeve Andre' This my output from sysctl and apm when running on the lowest clockspeed: # sysctl hw | grep -iE cpuspeed|setperf|fan|consumption hw.sensors.acpithinkpad0.fan0=1959 RPM hw.sensors.itherm0.power0=6.00 W (CPU power consumption) hw.cpuspeed=1199 hw.setperf=0 # apm Battery state: high, 70% remaining, 111 minutes life estimate A/C adapter state: not connected Performance adjustment mode: manual (1199 MHz) This is the output when i use apm -H: # sysctl hw | grep -iE cpuspeed|setperf|fan|consumption hw.sensors.acpithinkpad0.fan0=1972 RPM hw.sensors.itherm0.power0=6.00 W (CPU power consumption) hw.cpuspeed=2666 hw.setperf=100 # apm Battery state: high, 68% remaining, 107 minutes life estimate A/C adapter state: not connected Performance adjustment mode: manual (2666 MHz) The energy consumption is the same which is odd. --Johan This may be a bug in itherm(4), I'll take a look. Tell me if you find something, i'll gladly help if I could do something. /J
CPU power consumption on thinkpad x201 on openbsd current
I'm trying to migrate from Linux to Openbsd on my laptop (thinkpad x201). The first problem that i came across was that the Cpu fanspeed was running constantly at 3500RPM. After the acpithinkpad.c patch from jcs (and i modified to make it work on the openbsd-current(link: http://exclude.se/patch/jcs_mod_by_js.diff) Another thing that i noticed is that the battery lifetime is really bad. In Linux i get around ~5,5 hours. In OpenBSD i get around 2 hours. when i ran : sysctl hw.sensors | grep -i consumption. the output of the cpu was 6W. in Linux it's around 1,5W. with: apmd -C and apmd -L it's the same. dmesg: http://exclude.se/openbsd/dmesg.txt Is there anyway to fix this? Regards Johan Svensson
Change default audiodevice in OpenBSD-current
I am trying to change my default output device from my builtin soundcard to an usb soundcard which is an output only device. I have tried: # audioctl -f /dev/audio1 audioctl: /dev/audio1: Device not configured I think there should be some controller that you configuring the audio device. But i manually tried to change the symlinks in the dev directory: # ls -la * | grep -E mixer|audio lrwxr-xr-x 1 root wheel6 Jun 3 16:58 audio - audio1 crw-rw-rw- 1 root wheel 42, 128 Jun 3 17:01 audio0 crw-rw-rw- 1 root wheel 42, 129 May 28 19:07 audio1 crw-rw-rw- 1 root wheel 42, 130 May 28 19:07 audio2 lrwxr-xr-x 1 root wheel9 Jun 3 16:58 audioctl - audioctl1 crw-rw-rw- 1 root wheel 42, 192 May 28 19:07 audioctl0 crw-rw-rw- 1 root wheel 42, 193 May 28 19:07 audioctl1 crw-rw-rw- 1 root wheel 42, 194 May 28 19:07 audioctl2 lrwxr-xr-x 1 root wheel6 Jun 3 16:58 mixer - mixer1 crw-rw-rw- 1 root wheel 42, 16 May 28 19:07 mixer0 crw-rw-rw- 1 root wheel 42, 17 May 28 19:07 mixer1 crw-rw-rw- 1 root wheel 42, 18 May 28 19:07 mixer2 But it is still defaulting to my builtin soundcard. How can i change the default sounddevice from audio0 to audio1? /Regards Johan Svensson DMESG: dmesg | grep audio audio0 at azalia0 audio0 at azalia0 audio0 at azalia0 audio0 at azalia0 uaudio0 at uhub2 port 1 configuration 1 interface 1 NuForce, Inc. NuForce \M-5DAC 2 rev 1.10/0.01 addr 3 uaudio0: ignored setting with type 8193 format uaudio0: audio rev 1.00, 2 mixer controls audio1 at uaudio0
Re: Change default audiodevice in OpenBSD-current
On 06/03/14 18:22, Remco wrote: Johan Svensson wrote: I am trying to change my default output device from my builtin soundcard to an usb soundcard which is an output only device. I have tried: # audioctl -f /dev/audio1 audioctl: /dev/audio1: Device not configured It seems this device does not exist from the kernel's point of view. (there's also /dev/audioctl1, but using that probably doesn't make a difference) I think there should be some controller that you configuring the audio device. But i manually tried to change the symlinks in the dev directory: # ls -la * | grep -E mixer|audio lrwxr-xr-x 1 root wheel6 Jun 3 16:58 audio - audio1 crw-rw-rw- 1 root wheel 42, 128 Jun 3 17:01 audio0 crw-rw-rw- 1 root wheel 42, 129 May 28 19:07 audio1 crw-rw-rw- 1 root wheel 42, 130 May 28 19:07 audio2 lrwxr-xr-x 1 root wheel9 Jun 3 16:58 audioctl - audioctl1 crw-rw-rw- 1 root wheel 42, 192 May 28 19:07 audioctl0 crw-rw-rw- 1 root wheel 42, 193 May 28 19:07 audioctl1 crw-rw-rw- 1 root wheel 42, 194 May 28 19:07 audioctl2 lrwxr-xr-x 1 root wheel6 Jun 3 16:58 mixer - mixer1 crw-rw-rw- 1 root wheel 42, 16 May 28 19:07 mixer0 crw-rw-rw- 1 root wheel 42, 17 May 28 19:07 mixer1 crw-rw-rw- 1 root wheel 42, 18 May 28 19:07 mixer2 But it is still defaulting to my builtin soundcard. How can i change the default sounddevice from audio0 to audio1? I think using sndiod(1) is the answer, in the most simplistic form, something like this in your rc.conf.local(8) should suffice: sndiod_flags=-f rsnd/0 -s onboard -f rsnd/1 -s default This should make your audio0 device available as snd/0.onboard and your audio1 device as the default sound device. (Both should be available as snd/0 and snd/1 respectively as well IIRC). /Regards Johan Svensson DMESG: dmesg | grep audio audio0 at azalia0 audio0 at azalia0 audio0 at azalia0 audio0 at azalia0 uaudio0 at uhub2 port 1 configuration 1 interface 1 NuForce, Inc. NuForce \M-5DAC 2 rev 1.10/0.01 addr 3 uaudio0: ignored setting with type 8193 format If I'm correct format 8193 (== 0x2001) means IEC1937 AC-3. This is an encoded format. AFAICT the uaudio driver only supports plain PCM formats. (unencoded audio samples) Do you know if your device only supports AC-3 inputs or can it also handle PCM signals ? (running 'lsusb -v', from the usbutils package, on the device should give a good clue what your device supports) uaudio0: audio rev 1.00, 2 mixer controls audio1 at uaudio0 I can successfully run this command: if i use audioctl1 instead of audio1 it works, i dont know why tho. # audioctl -f /dev/audioctl1 name=USB audio version= config=uaudio encodings=slinear_le:16:2:1,slinear_le:24:3:1 properties=independent full_duplex=0 fullduplex=0 blocksize=8816 hiwat=7 lowat=5 output_muted=0 monitor_gain=0 mode= play.rate=44100 play.channels=2 play.precision=16 play.bps=2 play.msb=1 play.encoding=slinear_le play.gain=127 play.balance=32 play.port=0x0 play.avail_ports=0x0 play.seek=0 play.samples=0 play.eof=0 play.pause=0 play.error=0 play.waiting=0 play.open=0 play.active=0 play.buffer_size=65536 play.block_size=8816 play.errors=0 record.rate=44100 record.channels=2 record.precision=16 record.bps=2 record.msb=1 record.encoding=slinear_le record.gain=127 record.balance=32 record.port=0x0 record.avail_ports=0x0 record.seek=0 record.samples=0 record.eof=0 record.pause=0 record.error=0 record.waiting=0 record.open=0 record.active=0 record.buffer_size=65536 record.block_size=8816 record.errors=0 here is the output from the device in lsusb: Bus 000 Device 003: ID 1852:db96 GYROCOM CC Co., LTD Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1852 GYROCOM CC Co., LTD idProduct 0xdb96 bcdDevice0.01 iManufacturer 1 NuForce, Inc. iProduct2 NuForce µDAC 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 251 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType33 bcdHID 1.00 bCountryCode
Re: Change default audiodevice in OpenBSD-current
On 06/03/14 18:22, Remco wrote: Johan Svensson wrote: I am trying to change my default output device from my builtin soundcard to an usb soundcard which is an output only device. I have tried: # audioctl -f /dev/audio1 audioctl: /dev/audio1: Device not configured It seems this device does not exist from the kernel's point of view. (there's also /dev/audioctl1, but using that probably doesn't make a difference) I think there should be some controller that you configuring the audio device. But i manually tried to change the symlinks in the dev directory: # ls -la * | grep -E mixer|audio lrwxr-xr-x 1 root wheel6 Jun 3 16:58 audio - audio1 crw-rw-rw- 1 root wheel 42, 128 Jun 3 17:01 audio0 crw-rw-rw- 1 root wheel 42, 129 May 28 19:07 audio1 crw-rw-rw- 1 root wheel 42, 130 May 28 19:07 audio2 lrwxr-xr-x 1 root wheel9 Jun 3 16:58 audioctl - audioctl1 crw-rw-rw- 1 root wheel 42, 192 May 28 19:07 audioctl0 crw-rw-rw- 1 root wheel 42, 193 May 28 19:07 audioctl1 crw-rw-rw- 1 root wheel 42, 194 May 28 19:07 audioctl2 lrwxr-xr-x 1 root wheel6 Jun 3 16:58 mixer - mixer1 crw-rw-rw- 1 root wheel 42, 16 May 28 19:07 mixer0 crw-rw-rw- 1 root wheel 42, 17 May 28 19:07 mixer1 crw-rw-rw- 1 root wheel 42, 18 May 28 19:07 mixer2 But it is still defaulting to my builtin soundcard. How can i change the default sounddevice from audio0 to audio1? I think using sndiod(1) is the answer, in the most simplistic form, something like this in your rc.conf.local(8) should suffice: sndiod_flags=-f rsnd/0 -s onboard -f rsnd/1 -s default This should make your audio0 device available as snd/0.onboard and your audio1 device as the default sound device. (Both should be available as snd/0 and snd/1 respectively as well IIRC). /Regards Johan Svensson DMESG: dmesg | grep audio audio0 at azalia0 audio0 at azalia0 audio0 at azalia0 audio0 at azalia0 uaudio0 at uhub2 port 1 configuration 1 interface 1 NuForce, Inc. NuForce \M-5DAC 2 rev 1.10/0.01 addr 3 uaudio0: ignored setting with type 8193 format If I'm correct format 8193 (== 0x2001) means IEC1937 AC-3. This is an encoded format. AFAICT the uaudio driver only supports plain PCM formats. (unencoded audio samples) Do you know if your device only supports AC-3 inputs or can it also handle PCM signals ? (running 'lsusb -v', from the usbutils package, on the device should give a good clue what your device supports) uaudio0: audio rev 1.00, 2 mixer controls audio1 at uaudio0 I have updated my rc.conf.local line with sndiod_flags=-f rsnd/0 -s onboard -f rsnd/1 -s default but the default output device is still builtin sounddevice.
Re: Change default audiodevice in OpenBSD-current
On 06/03/14 19:33, Alexandre Ratchov wrote: On Tue, Jun 03, 2014 at 07:25:25PM +0200, Alexandre Ratchov wrote: sndiod_flags=-f rsnd/1 -f rsnd/0 This will kind of exchange the first two devices. I.e. this exposes snd/0 as sub-device of rsnd/1 and snd/1 as sub-device of rsnd/0. If device renumbering seems confusing/ugly, another option would be to keep the kernel order: sndiod_flags=-f rsnd/0 -f rsnd/1 then export AUDIODEVICE=snd/1 in your ~/.profile or equivalent -- Alexandre grep sndiod /etc/rc.conf.local #sndiod_flags=-f rsnd/0 -s onboard -f rsnd/1 -s default sndiod_flags=-f rsnd/1 -f rsnd/0 #sndiod_flags=-f rsnd/0 -f rsnd/1 I've tried all three of the settings, the first and the last defaults to builtin soundcard. But if I use the second configuration setting this shows up in dmesg: ehci0: Error opening low/full speed isoc endpoint. A low/full speed device is attached to a USB2 hub, and transaction translations are not yet supported. Reattach the device to the root hub instead. uaudio_chan_open: error creating pipe: err=INVAL endpt=0x03 I dont know if that helps. //Johan
Re: Change default audiodevice in OpenBSD-current
On 06/03/14 20:08, Alexandre Ratchov wrote: On Tue, Jun 03, 2014 at 07:59:49PM +0200, Johan Svensson wrote: On 06/03/14 19:33, Alexandre Ratchov wrote: On Tue, Jun 03, 2014 at 07:25:25PM +0200, Alexandre Ratchov wrote: sndiod_flags=-f rsnd/1 -f rsnd/0 This will kind of exchange the first two devices. I.e. this exposes snd/0 as sub-device of rsnd/1 and snd/1 as sub-device of rsnd/0. If device renumbering seems confusing/ugly, another option would be to keep the kernel order: sndiod_flags=-f rsnd/0 -f rsnd/1 then export AUDIODEVICE=snd/1 in your ~/.profile or equivalent -- Alexandre grep sndiod /etc/rc.conf.local #sndiod_flags=-f rsnd/0 -s onboard -f rsnd/1 -s default sndiod_flags=-f rsnd/1 -f rsnd/0 #sndiod_flags=-f rsnd/0 -f rsnd/1 I've tried all three of the settings, the first and the last defaults to builtin soundcard. But if I use the second configuration setting this shows up in dmesg: ehci0: Error opening low/full speed isoc endpoint. A low/full speed device is attached to a USB2 hub, and transaction translations are not yet supported. Reattach the device to the root hub instead. uaudio_chan_open: error creating pipe: err=INVAL endpt=0x03 the usb stack is incomplete and doesn't support rate matching hubs yet; sorry your sound card can't work on this machine yet. recently discussed here: http://comments.gmane.org/gmane.os.openbsd.misc/212991 -- Alexandre Okey, that explains it. Thanks for your help. /Johan