Re: laptops needed
What types of specs are they looking for? Small or large screens? On 4/9/06, Gustavo Rios [EMAIL PROTECTED] wrote: Excuse gentleman, but i don't see any rationale behind that tense: one could argue that people who live in such places should not have computers) On 4/9/06, Theo de Raadt [EMAIL PROTECTED] wrote: Two developers who don't have a lot of money recently had their laptops die -- laptops which other project developers gave them in the past. We would love if it some people could donate some. One is Brad in Toronto, and the other is Joris in Dominica (yes, the island -- one could argue that people who live in such places should not have computers). For Brad it is likely better to get a machine directly to him there, but for the other it is probably better to get it to Calgary so that the machine can be gotten to Joris during the hackathon. If anyone can offer these, we would appreciate it. Contact them directly, or me. Thank you.
Re: Tyan Thunder LE SMP issues
Well, according to Theo, this is something of a known bug - he told me that you (Toby) were working on it... As Brain said, I have swapped the processors, and run memcheck86 with each of them being in the first slot. If anyone has any further suggestions on how I might test the hardware portion, I would love to try them, as I have a total of two duplicate motherboards, 4 duplicate processors, and 8 duplicate 256MB ram sticks I can try swapping around. On 11/17/05, Brian A. Seklecki [EMAIL PROTECTED] wrote: As far as I know, this is UP, and does not use SMP. Chances are you have some sort of SMP issue... maybe with the 2nd CPU. He indicated that he swapped them up. --Toby. l8* -lava x.25 - minix - bitnet - plan9 - 110 bps - ASR 33 - base8
Tyan Thunder LE SMP issues
Hey all, hoping someone might be able to point me in some sort of direction... I recently was given two BOXX brand 1u servers, both of which are the exact same - Tyan Thunder LE 2510 dual proc motherboards, with two 867Mhz chips per board, and 4 256MB ram sticks per board. The rest you can get from the dmesg. Anyway, I have been trying to get OpenBSD to run on them, and I continuously have problems on processor 1 - and no, it does not matter WHICH processor is in slot 1. I usually get an apm error, but sometimes I get tcp related, or copyout related, or other errors - all ending up with me dumped into ddb. These are usually stopped errors, not panics. In this case, the error is a apm_cpu_idle stopped error. So, here it goes - the dmesg, the trace on each processor, and the ps - as I side note, I can almost always instigate this crash by trying to untar something big - especially is I use verbose mode. PANIC # Stopped at apm_cpu_idle+0x4a: leal0xfff4(%ebp),%esp ddb{0} show panic the kernel did not panic DMESG * OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel Pentium III (GenuineIntel 686-class) 864 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,S ER,MMX,FXSR,SSE real mem = 1073324032 (1048168K) avail mem = 972730368 (949932K) using 4278 buffers containing 53768192 bytes (52508K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 10/31/00, BIOS32 rev. 0 @ 0xfdba0 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown, estimated 0:00 hours apm0: APM get event: interface not connected (3) apm0: APM get event: interface not connected (3) apm0: disconnected apm0: flags 30102 dobusy 0 doidle 0 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5200/192 (10 entries) pcibios0: PCI Interrupt Router at 000:15:0 (ServerWorks ROSB4 SouthBridge rev 0x00) pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc/0x8000 0xc8000/0x1000 ainbus0: Intel MP Specification (Version 1.4) (AMI CNB30LE ) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 132 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel Pentium III (GenuineIntel 686-class) 864 MHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,S ER,MMX,FXSR,SSE mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type ISA ioapic0 at mainbus0: apid 4 pa 0xfec0, version 11, 16 pins ioapic1 at mainbus0: apid 5 pa 0xfec01000, version 11, 16 pins pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 ServerWorks CNB20LE Host rev 0x06 pchb1 at pci0 dev 0 function 1 ServerWorks CNB20LE Host rev 0x06 pci1 at pchb1 bus 1 vga1 at pci0 dev 1 function 0 ATI Rage XL rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) fxp0 at pci0 dev 4 function 0 Intel 82557 rev 0x08, i82559: apic 5 int 4 (irq 11), address 00:e0:81:01:cb:ca inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 pcib0 at pci0 dev 15 function 0 ServerWorks ROSB4 SouthBridge rev 0x50 pciide0 at pci0 dev 15 function 1 ServerWorks OSB4 IDE rev 0x00: DMA wd0 at pciide0 channel 0 drive 0: Maxtor 6Y060L0 wd0: 16-sector PIO, LBA, 58644MB, 120103200 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 ohci0 at pci0 dev 15 function 2 ServerWorks OSB4/CSB5 USB rev 0x04: apic 4 in t 10 (irq 10), version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask 0 netmask 0 ttymask 0 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 WARNING: / was not properly unmounted Stopped at apm_cpu_idle+0x4a: leal0xfff4(%ebp),%esp PS *** db{0} ps PID PPID PGRPUID S FLAGS WAIT COMMAND 12120 24238 24238 0 7 0x2004006 gzip 24238 24978 24238 0 3 0x2004086 piperd tar 24978 14077 24978 0 3 0x2004086 pause ksh 14077286 14077 1000 3
Re: Tyan Thunder LE SMP issues
Sorry, given in this context means someone is letting me play with them to see if I can get them working with OpenBSD. They display equivalent crashes in NetBSD - I have not tried FreeBSD or any linux distros. As for Memcheck86+, I can leave it running for over 24 hours with no issues, and no errors reported. On 11/16/05, Brian A. Seklecki [EMAIL PROTECTED] wrote: Why were they given to you? Something wrong with them perhaps. Try booting Memtest86+ ISO and let it ride for a while? Try another kernel from another OS? Try a non MP kernel? ~BAS On Wed, 2005-11-16 at 22:01, Lokkju wrote: Hey all, hoping someone might be able to point me in some sort of direction... I recently was given two BOXX brand 1u servers, both of which are the exact same - Tyan Thunder LE 2510 dual proc motherboards, with two 867Mhz chips per board, and 4 256MB ram sticks per board. The rest you can get from the dmesg. Anyway, I have been trying to get OpenBSD to run on them, and I continuously have problems on processor 1 - and no, it does not matter WHICH processor is in slot 1. I usually get an apm error, but sometimes I get tcp related, or copyout related, or other errors - all ending up with me dumped into ddb. These are usually stopped errors, not panics. In this case, the error is a apm_cpu_idle stopped error. So, here it goes - the dmesg, the trace on each processor, and the ps - as I side note, I can almost always instigate this crash by trying to untar something big - especially is I use verbose mode. PANIC # Stopped at apm_cpu_idle+0x4a: leal0xfff4(%ebp),%esp ddb{0} show panic the kernel did not panic DMESG * OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel Pentium III (GenuineIntel 686-class) 864 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,S ER,MMX,FXSR,SSE real mem = 1073324032 (1048168K) avail mem = 972730368 (949932K) using 4278 buffers containing 53768192 bytes (52508K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 10/31/00, BIOS32 rev. 0 @ 0xfdba0 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown, estimated 0:00 hours apm0: APM get event: interface not connected (3) apm0: APM get event: interface not connected (3) apm0: disconnected apm0: flags 30102 dobusy 0 doidle 0 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5200/192 (10 entries) pcibios0: PCI Interrupt Router at 000:15:0 (ServerWorks ROSB4 SouthBridge rev 0x00) pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc/0x8000 0xc8000/0x1000 ainbus0: Intel MP Specification (Version 1.4) (AMI CNB30LE ) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 132 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel Pentium III (GenuineIntel 686-class) 864 MHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,S ER,MMX,FXSR,SSE mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type ISA ioapic0 at mainbus0: apid 4 pa 0xfec0, version 11, 16 pins ioapic1 at mainbus0: apid 5 pa 0xfec01000, version 11, 16 pins pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 ServerWorks CNB20LE Host rev 0x06 pchb1 at pci0 dev 0 function 1 ServerWorks CNB20LE Host rev 0x06 pci1 at pchb1 bus 1 vga1 at pci0 dev 1 function 0 ATI Rage XL rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) fxp0 at pci0 dev 4 function 0 Intel 82557 rev 0x08, i82559: apic 5 int 4 (irq 11), address 00:e0:81:01:cb:ca inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 pcib0 at pci0 dev 15 function 0 ServerWorks ROSB4 SouthBridge rev 0x50 pciide0 at pci0 dev 15 function 1 ServerWorks OSB4 IDE rev 0x00: DMA wd0 at pciide0 channel 0 drive 0: Maxtor 6Y060L0 wd0: 16-sector PIO, LBA, 58644MB, 120103200 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 ohci0 at pci0 dev 15 function 2 ServerWorks OSB4/CSB5 USB rev 0x04: apic 4 in t 10 (irq 10), version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8