Re: Random crash
On 6/19/07, Brian A. Seklecki [EMAIL PROTECTED] wrote: Are you doing something strong with Cryptography? No, just ssh and apache Funny, my GENERIC kernel gives me: OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC Try downloading bsd from ftp.openbsd.org/pub/OpenBSD/4.1/i386 and replace the one you have and see what happens I just applied the official patch, no custom Sorry for the missing ifo, today I tried to reboot and now hangs at boot...
Random crash
Hi all, I'm having a lot of crashes with my 4.1 since I updated from 4.0 ...the console output is: page fault trap code=0 stopped at enqueue_randomness+0xc5addb%al,0(%eax) ddb I tried checking the RAM (Memtest runned 20 hours withour any error and I used this box with another ram stick) and I get the same result..a crash every 10-15 hours. Any suggestion? OpenBSD 4.1 (GENERIC) #6: Sun May 6 22:37:50 CEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD-K6(tm) 3D processor (AuthenticAMD 586-class) 500 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX real mem = 536440832 (523868K) avail mem = 481771520 (470480K) using 4278 buffers containing 26947584 bytes (26316K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 12/27/99, BIOS32 rev. 0 @ 0xfd9a0, SMBIOS rev. 2.3 @ 0xf04f0 (23 entries) bios0: American Megatrends Inc. Uknown apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7630/144 (7 entries) pcibios0: PCI Interrupt Router at 000:07:0 (Acer Labs M1533 ISA rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc/0x1 0xd/0x800 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Acer Labs M1541 PCI rev 0x04 ppb0 at pci0 dev 1 function 0 Acer Labs M5243 AGP/PCI-PCI rev 0x04 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 NVIDIA Vanta rev 0x15 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 Acer Labs M1533 ISA rev 0xc3 pciide0 at pci0 dev 15 function 0 Acer Labs M5229 UDMA IDE rev 0xc1: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: IC35L060AVVA07-0 wd0: 16-sector PIO, LBA, 58644MB, 120103200 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: LITEON, CD-ROM LTN362, UL28 SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 xl0 at pci0 dev 16 function 0 3Com 3c905 100Base-TX rev 0x00: irq 11, address 00:60:97:ad:10:76 nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1 xl1 at pci0 dev 18 function 0 3Com 3c905C 100Base-TX rev 0x74: irq 9, address 00:01:02:b9:48:2c bmtphy0 at xl1 phy 24: Broadcom 3C905C internal PHY, rev. 6 ohci0 at pci0 dev 20 function 0 Opti 82C861 rev 0x10: irq 10, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Opti OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec isapnp0 at isa0 port 0x279: read port 0x203 sb1 at isapnp0 Creative SB16 PnP, CTL0031, , Audio port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5: dsp v4.13 midi1 at sb1: SB MPU-401 UART audio0 at sb1 opl0 at sb1: model OPL3 midi2 at opl0: SB Yamaha OPL3 wdc2 at isapnp0 Creative SB16 PnP, CTL2011, PNP0600, IDE port 0x100/8,0x300/2 irq 15 Creative SB16 PnP, PNP, , Reserved at isapnp0 port 0x108/1 not configured joy0 at isapnp0 Creative SB16 PnP, CTL7001, PNPB02F, Game port 0x200/8 biomask f545 netmask ff45 ttymask ffc7 pctr: user-level cycle counter enabled mtrr: K6-family MTRR support (2 registers) umass0 at uhub0 port 2 configuration 1 interface 0 umass0: Generic Flash Disk, rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: Generic, USB Flash Drive, 1.00 SCSI2 0/direct removable sd0: 508MB, 508 cyl, 64 head, 32 sec, 512 bytes/sec, 1040384 sec total dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 wd0a: DMA error reading fsbn 128 of 128-0 (wd0 bn 191; cn 0 tn 3 sn 2), retrying wd0: soft error (corrected) WARNING: / was not properly unmounted wd0: transfer error, downgrading to Ultra-DMA mode 1 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1 wd0a: DMA error reading fsbn 4832 of 4832-0 (wd0 bn 4895; cn 5 tn 2 sn 44), retrying wd0: soft error (corrected)
Re: Mac Mini (intel) status
Thank you. The goal is to have the mini replace my dying sparc64 as a web server. Small, low power draw, quiet: I like that. Quite expensive also
Re: Mac Mini (intel) status
Your comment on its own is of little value since most of us are already aware of the pricing of the Mini, or we can easily find out if we aren't. Oh sorry for ruining your day with this...
Re: ADSL with pppoa (over ATM)
The WAN allocated from the ISP's RADUIS server will be passed through the DLink, via DHCP, to your NIC. If you aren't convinced, put a windows box with a DHCP NIC behind the DLink while in bridge mode, and see it get a routable address. Try this: unplug the telephone wire, reboot the DLink, and your NIC will get a private address (on windows, do an ipconfig /renew). Plug in the telephone wire, and it will get a public one. Job done. Can you explain how to handle the authentication? I missed this point
Re: ADSL with pppoa (over ATM)
My ADSL connection is PPPoA only, which is just PPPoE with ATM. They work at different layers so if you bridge your adsl modem and handle only the ATM part, then openbsd pppoe can do the rest. So this means your ADSL modem will have no public facing IP and reconnecting to it may be tricky once you have set it up. So be careful how you set it up. Can you please post your ppp configuration file? So on the Dlink modem all you just did was to set it on bridge mode. Why it shouldn't work with the 1-port version? I have this (300t) :-( but I upgraded the firmware
Re: Support the project by buying from store or make donations
There's always the polo shirt, or since you're in Europe, some of the gear on https://kd85.com/notforsale.html perhaps. Pics of the stuff?
Re: ADSL with pppoa (over ATM)
On 3/22/06, Simon Slaytor [EMAIL PROTECTED] wrote: My understanding is that to operate in 'full bridge mode' requires pppoe support from the provider. Which is where this thread started. Not pppoe, but pppoa
Re: ADSL with pppoa (over ATM)
I used to have one of these. On your external NIC, use DHCP, and that is it. The DLink does the PPPoA stuff and issues the WAN IP address to your DHCP card. You can still telnet to the DLink on 192.168.0.1 at the same time as your link being up. mmm...I tried switching off dhcp server on the modem, issued a dhcpclient xl1 but I can't get a dhcp response
ADSL with pppoa (over ATM)
Hi, I read the faq searching for info about pppoa (http://www.openbsd.org/faq/faq6.html) : The main software interface to PPPoE/PPPoA on OpenBSD is pppoe(8), which is a userland implementation (in much the same way that we described ppp(8), above) but I can't figure out how to configure it for a ppp over ATM connection. Anyone can help? I don't want to have a double NAT, one from the adsl modem and one from the OpenBSD gateway... thanks
Re: ADSL with pppoa (over ATM)
D-link 300T that now it's doing NAT and working with a DHCP server for the internal network
Re: phpldapadmin not working well
I only get the following in my logs : [Tue Feb 21 09:57:26 2006] [notice] child pid 15419 exit signal Segmentation fault (11) Any idea? Thanks! I had a similar error when I made a mess with php...check your httpd.conf...Can you post the output of a pkg_info?
Re: phpldapadmin not working well
Hi. Thanks for answering. I don't think I messed up anything with php, I'm using the standard configuration with _no change_. php5-core-5.0.5 php5-ldap-5.0.5p0 I presume that php is working normally...right? My problem was php5. I installed php4 and then php5 (removing version 4 with all the dependences and then installing 5) but I couldn't get the php scripts working. Installing back php4 solved my problems...
Re: OpenBSD Metastore: update
Szechuan Death wrote: The MetaStore has been updated - comments are now enabled, you can post comments under each item listed. Drivers for hardware are also listed. Some other categories have been added, and some other stuff has changed in the background. Also, some new items have been added. The more hardware that is submitted, the more useful this resource is. Posted the link on some forum... :)
Re: PHP or Mysql problem?
Nico Meijer wrote: Hi Kiraly, mysql error: Can't create/write to file '/tmp/ #sql_4c99_0.MYD' (Errcode: 9) MySQL problem. Simple suggestions, not idiot-proof: /etc/my.cnf: Mmm..installing mysqlserver usually doesn't create /etc/my.cfn...isn't it? I can't find that file but I'm running mysqld...
