On 09/28/14 09:11, Mike Larkin wrote:
On Thu, Sep 25, 2014 at 12:12:55PM -0400, Ted W. wrote:
I have really enjoyed the last few weeks of running OpenBSD on my
Thinkpad. Almost everything I need works and or worked right out of
the box. The only real issue I've noticed is that when the system
returns from suspend and press ctrl-alt-del to restart X either X or
SLiM (not sure which) will not come back up. To work around this
issue, I switch to TTY2, log in as root and run `/etc/rc.d/slim
restart`. I've tried suspending with and without using slock first
and the behavior stays the same.
Any input on the matter would be appreciated,
--
Ted W.
No dmesg, no help.
Thank you for letting me know. I was not sure what would be helpful
information to provide here. I have included the dmesg output below. I
have also included Xorg.0.log in case that's helpful. I'm happy to
provide any other information that would be useful.
==
# dmesg
: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi,
AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: SCSI3
0/direct fixed naa.5000c5006a47abd7
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1
int 23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
ugen0 at uhub2 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (5d6cdf996da41425.a) swap on sd0b dump on sd0b
ugen0 detached
ugen0 at uhub2 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 2
iwn0: fatal firmware error
firmware error log:
error type = "NMI_INTERRUPT_WDG" (0x0004)
program counter = 0x046C
source line = 0x00D0
error data = 0x00020263
branch link = 0x4B0C04C2
interrupt link = 0x06DE4B22
time= 2978746026
driver status:
tx ring 0: qid=0 cur=187 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=26 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
rx ring: cur=40
802.11 state 4
iwn0: fatal firmware error
firmware error log:
error type = "NMI_INTERRUPT_WDG" (0x0004)
program counter = 0x046C
source line = 0x00D0
error data = 0x00020263
branch link = 0x4B0C04C2
interrupt link = 0x06DE4B22
time= 2503288226
driver status:
tx ring 0: qid=0 cur=127 queued=1
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=225 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
rx ring: cur=16
802.11 state 4
iwn0: fatal firmware error
firmware error log:
error type = "NMI_INTERRUPT_WDG" (0x0004)
prog
