Re: Failure to install on MacBook Pro Retina early 2015

2023-05-24 Thread barradas

I can confirm that the MacBook Pro is amd64.
And yes the install process starts from the USB stick and falls over 
trying to find

/etc/boot.conf.

Using the limited commands of the installer I can't find /etc/boot.conf 
so I can't

tell the installer where it is!

However just for Jan Stary, I used to run OpenBSD on an original Bondi 
Blue iMac, you should be using ofwboot
for macppc if I remember correctly and be able to rummage around the 
filesystems using decidely opaque commands for

Open Firmware.

DaveT

On 2023-05-23 08:18, Jan Stary wrote:

On May 22 23:24:04, dave_t_tur...@barradas.free-online.co.uk wrote:

The MacBookPro uses UEFI and will only boot from a USB stick for the
install.
After using the Apple magic 'alt' key to boot from the USB stick I get
this:-
probing pc0 mem [list of numbers]
disk: hdo* hd1*
> > OpenBSD /amd64 BOOTX64 3.62
open (hd0a: /etc/boot.conf: Invalid argument
failed (22) will try /bsd


I see a similar problem on an old macppc (dmesg below).
In my case, the error message is

boot.conf: line too long

while there is no boot.conf


Using 'set' and 'help' doesn't yield any useful info
to find the boot.conf file.


That should be /etc/boot.conf.
I guess there is one on the install media - what dfoes it say?


ls gives hd0a Invalid Argument
ls hd0a gives hd0a:hd0a Invalid Argument


I am able to boot with

> boot hd:/bsd

but I only have one disk in. Try that or

> boot hd0a:/bsd


set shows the device as hd0.
hd0a is definitely the USB stick.


To be sure: you are trying to boot the USB stick to install, right?
As opposed to trying to boot the already installed system.


Is this install doomed to fail or am I missing some secret info that
rummaging through the boot(8)
boot_config(8) and boot_configamd64(8) man pages has failed to find?


Also, are you sure it's an amd64 machine?
(Not related to the boot problem I guess.)

Jan


[ using 1330724 bytes of bsd ELF symbol table ]
console out [ATY,RockHopper2_A] console in [keyboard], using USB
using parent ATY,RockHopper2Paren:: memaddr 9800, size 800 :
consaddr 9c008000 : ioaddr 9002, size 2: width 1920 linebytes
2048 height 1080 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved.  
https://www.OpenBSD.org


OpenBSD 7.3-current (GENERIC) #105: Sat Apr 15 17:07:53 MDT 2023
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1025327104 (977MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac10,2
cpu0 at mainbus0: 7447A (Revision 0x102): 1499 MHz: 512KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0
memc0 at mainbus0: uni-n rev 0xd2
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
agp at pchb0 not configured
radeondrm0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01
drm0 at radeondrm0
radeondrm0: irq 48
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x4: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1c not configured
macgpio1 at macgpio0 offset 0x9: irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
aoa0 at macobio0 offset 0x1: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0: battery flags 0x0, 0% charged
piic0 at adb0
iic1 at piic0
maxtmp0 at iic1 addr 0xc8: max6642
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x2 irq 24: DMA
audio0 at aoa0
ohci0 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29,
version 1.0, legacy support
ohci1 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci2 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev
2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev
1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev
1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 

Failure to install on MacBook Pro Retina early 2015

2023-05-22 Thread barradas
The MacBookPro uses UEFI and will only boot from a USB stick for the 
install.
After using the Apple magic 'alt' key to boot from the USB stick I get 
this:-

probing pc0 mem [list of numbers]
disk: hdo* hd1*

OpenBSD /amd64 BOOTX64 3.62

open (hd0a: /etc/boot.conf: Invalid argument
failed (22) will try /bsd

Using 'set' and 'help' doesn't yield any useful info to find the 
boot.conf file.

ls gives hd0a Invalid Argument
ls hd0a gives hd0a:hd0a Invalid Argument

set shows the device as hd0.
hd0a is definitely the USB stick.

Is this install doomed to fail or am I missing some secret info that 
rummaging through the boot(8)

boot_config(8) and boot_configamd64(8) man pages has failed to find?

The MacBook Pro is currently running Devuan Chimaera linux to avoid 
systemd...


Thankyou,

DaveT



open BSD + enterprise 250 don't work

2006-05-23 Thread Jose Hugo Barradas Culebro
Hi, from mexico city.


I've been trying to install the opneBSD 3.9 that I bought to you on a Sun
Enterprise 250.
but it gets frozen the installation almost to the begining.

Even that in your web says that it's compatible.

Then I tried with 3.4, 3.8 and neither I couldn't , the same thing.


can you help me?

this is an image of where the installation gets frozen.

http://i81.photobucket.com/albums/j225/ddtrebel/DSC05922.jpg


please, I hope yo u can help me

thanks