Re: "Available disks are: none" on Sony Vaio SVZ13115GGXI
Hi Naddy, I need to verify this, but I believe things stop working (i.e. kernel boots but no longer gets to userland because no block device is found) when i switch modes in the BIOS. This suggests that the PCI ID *does* change when fiddling around in the BIOS. I'm not at home for a couple of days, I'll follow up when I have access to my Sony again. Paul On Sat, Jan 30, 2016 at 03:05:47PM +, Christian Weisgerber wrote: | On 2016-01-30, Paul de Weerdwrote: | | > { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_AHCI, | > NULL, ahci_intel_attach }, | > + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_RAID, | > + NULL, ahci_intel_attach }, | | So this means that switching to non-RAID mode in the Vaio BIOS does | not change the PCI ID as it generally does? | | -- | Christian "naddy" Weisgerber na...@mips.inka.de | -- >[<++>-]<+++.>+++[<-->-]<.>+++[<+ +++>-]<.>++[<>-]<+.--.[-] http://www.weirdnet.nl/
Re: "Available disks are: none" on Sony Vaio SVZ13115GGXI
On 2016-01-31, Paul de Weerdwrote: > Hi Naddy, > > I need to verify this, but I believe things stop working (i.e. kernel > boots but no longer gets to userland because no block device is found) > when i switch modes in the BIOS. This suggests that the PCI ID *does* > change when fiddling around in the BIOS. I'm not at home for a couple > of days, I'll follow up when I have access to my Sony again. "lspci -v" from a working OS with it set to non-raid mode would be useful (or pcidump -v, if you can boot a copy of OpenBSD installed on a USB device etc). AFAIK generally we try *not* to match the RAID mode IDs to avoid damage to disks with existing RAID configurations..
Re: "Available disks are: none" on Sony Vaio SVZ13115GGXI
Paul, thanks for the patch. It worked! Jonathan, thanks for fixing the model identifier in CVS. Christian and Stuart, my Vaio (model and BIOS versions earlier in thread) does not have any BIOS setting for non-RAID mode. The Intel storage controller BIOS only allows the two 128 GB drives to be configured as a "RAID volume" or as "non-RAID disks". As per my original post, with CVS -current no disk is detected regardless of drive configuration (RAID or non-RAID mode). The dmesg reports the same in both modes: pciide0 at pci0 dev 31 function 2 "Intel 82081HBM RAID" rev 0x04: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI. With Paul's patch: When configured as a RAID 0 volume, install will detect two 128 GB drives. Completing the install and rebooting returns a partition not found error. When configured as "non-RAID disks", install will detect two 128 GB drives. Completing the install and rebooting is successful. Below is the resulting dmesg.boot and pcidump.txt. OpenBSD 5.9-beta (GENERIC.MP) #0: Mon Feb 1 11:07:25 AEDT 2016 b...@bpavm.internal.acegi.com.au:/usr/src/sys/arch/amd64/compile/GENERIC.M P RTC BIOS diagnostic error 80 real mem = 8465932288 (8073MB) avail mem = 8205156352 (7825MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6960 (18 entries) bios0: vendor Insyde Corp. version "R0092C6" date 05/21/2012 bios0: Sony Corporation SVZ13115GGXI acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP TCPA UEFI ASF! HPET APIC MCFG SLIC WDAT SSDT BOOT SSDT ASPT FPDT SSDT SSDT SSDT SSDT acpi0: wakeup devices EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) WLAN(S0) RP01(S0) RMSC(S0) RP02(S0) RLAN(S3) RP04(S3) RP07(S3) PEG0(S0) PEGP(S0) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2095.55 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2095.24 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2095.24 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2095.24 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 cpu4 at mainbus0: apid 4 (application processor) cpu4: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2095.24 MHz cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu4: 256KB 64b/line 8-way L2 cache cpu4: smt 0, core 2, package 0 cpu5 at mainbus0: apid 5 (application processor) cpu5: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2095.24 MHz cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu5: 256KB 64b/line 8-way L2 cache cpu5: smt 1, core 2, package 0 cpu6
Re: "Available disks are: none" on Sony Vaio SVZ13115GGXI
On 2016-01-30, Paul de Weerdwrote: > { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_AHCI, > NULL, ahci_intel_attach }, > + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_RAID, > + NULL, ahci_intel_attach }, So this means that switching to non-RAID mode in the Vaio BIOS does not change the PCI ID as it generally does? -- Christian "naddy" Weisgerber na...@mips.inka.de
Re: "Available disks are: none" on Sony Vaio SVZ13115GGXI
On Sat, Jan 30, 2016 at 12:04:10PM +1100, Jonathan Gray wrote: | They are the same, the string in pcidevs was wrong. I just commited | a change to fix it. Ah, right. Thanks Jonathan! Ben, you may still try that patch then. Index: ahci_pci.c === RCS file: /cvs/src/sys/dev/pci/ahci_pci.c,v retrieving revision 1.12 diff -u -p -r1.12 ahci_pci.c --- ahci_pci.c 14 Jan 2016 04:06:53 - 1.12 +++ ahci_pci.c 14 Jan 2016 21:37:03 - @@ -125,6 +125,8 @@ static const struct ahci_device ahci_dev NULL, ahci_intel_attach }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_AHCI, NULL, ahci_intel_attach }, + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_RAID, + NULL, ahci_intel_attach }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_AHCI_1, NULL, ahci_intel_attach }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_AHCI_2, Cheers, Paul -- >[<++>-]<+++.>+++[<-->-]<.>+++[<+ +++>-]<.>++[<>-]<+.--.[-] http://www.weirdnet.nl/
Re: "Available disks are: none" on Sony Vaio SVZ13115GGXI
I've been running with this diff on my Vaio for a long time. Works for me; give it a try: Index: ahci_pci.c === RCS file: /cvs/src/sys/dev/pci/ahci_pci.c,v retrieving revision 1.12 diff -u -p -r1.12 ahci_pci.c --- ahci_pci.c 14 Jan 2016 04:06:53 - 1.12 +++ ahci_pci.c 14 Jan 2016 21:37:03 - @@ -125,6 +125,8 @@ static const struct ahci_device ahci_dev NULL, ahci_intel_attach }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_AHCI, NULL, ahci_intel_attach }, + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_RAID, + NULL, ahci_intel_attach }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_AHCI_1, NULL, ahci_intel_attach }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_AHCI_2, On Fri, Jan 29, 2016 at 02:48:04PM +1100, Ben Alex wrote: | This laptop has 2 x Samsung 128 GB SSD drives and a RAID controller | which reports as "Intel Rapid Storage Technology (Option ROM version | 11.0.0.1339)". | | OpenBSD 5.7, 5.8 and current (20160125) installers each report | "Available disks are: None". | | Available system BIOS settings (XHCI Mode, Execute Bit Capability) and | RAID BIOS settings (non-RAID, RAID) have been toggled without success. | | Windows recovery was used to upgrade the system BIOS to the latest | available version, R0092C6. The prior version (R0091C6) behaved the | same. | | Linux and FreeBSD detect the drives and permit partitioning. dmesg | output from both OpenBSD and FreeBSD are below. | | Any suggestions appreciated. | | Thanks | | === | | OpenBSD 5.9-beta (RAMDISK_CD) #1696: Mon Jan 25 19:16:37 MST 2016 | dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD | RTC BIOS diagnostic error 80 | real mem = 8465932288 (8073MB) | avail mem = 8207634432 (7827MB) | mainbus0 at root | bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6960 (18 entries) | bios0: vendor Insyde Corp. version "R0091C6" date 05/07/2012 | bios0: Sony Corporation SVZ13115GGXI | acpi0 at bios0: rev 2 | acpi0: tables DSDT FACP TCPA UEFI ASF! HPET APIC MCFG SLIC WDAT SSDT | BOOT SSDT ASPT FPDT SSDT SSDT SSDT SSDT | acpimadt0 at acpi0 addr 0xfee0: PC-AT compat | cpu0 at mainbus0: apid 0 (boot processor) | cpu0: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2095.54 MHz | cpu0: | FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS | H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX | ,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,X | SAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT | cpu0: 256KB 64b/line 8-way L2 cache | cpu0: apic clock running at 99MHz | cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE | cpu at mainbus0: not configured | cpu at mainbus0: not configured | cpu at mainbus0: not configured | cpu at mainbus0: not configured | cpu at mainbus0: not configured | cpu at mainbus0: not configured | cpu at mainbus0: not configured | ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins | acpiprt0 at acpi0: bus 0 (PCI0) | acpiprt1 at acpi0: bus 2 (RP01) | acpiprt2 at acpi0: bus 3 (RP02) | acpiprt3 at acpi0: bus 5 (RP04) | acpiprt4 at acpi0: bus 8 (RP07) | acpiprt5 at acpi0: bus -1 (PEG0) | acpiec0 at acpi0 | acpisony at acpi0 not configured | acpicpu at acpi0 not configured | acpitz at acpi0 not configured | acpibat at acpi0 not configured | acpibat at acpi0 not configured | acpiac at acpi0 not configured | acpibtn at acpi0 not configured | acpibtn at acpi0 not configured | pci0 at mainbus0 bus 0 | pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 | vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 | wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation) | "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured | ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23 | usb0 at ehci0: USB revision 2.0 | uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 | "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured | ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi | pci1 at ppb0 bus 2 | iwn0 at pci1 dev 0 function 0 "Intel Centrino Advanced-N 6235" rev | 0x24: msi, MIMO 2T2R, AGN, address c4:85:08:a1:a1:f8 | ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi | pci2 at ppb1 bus 3 | rtsx0 at pci2 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: msi | sdmmc0 at rtsx0 | ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi | pci3 at ppb2 bus 5 | re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: | RTL8168E/8111E-VL (0x2c80), msi, address 54:53:ed:1c:10:4d | rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 | ppb3 at pci0 dev 28 function 6 "Intel 7 Series PCIE" rev 0xc4: msi | pci4 at ppb3 bus 8 | ehci1 at pci0 dev 29
Re: "Available disks are: none" on Sony Vaio SVZ13115GGXI
Hi Ben, Upon another close inspection of your dmesg and mine, I don't think the below diff will work for you... This is in my machine: | + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_RAID, | + NULL, ahci_intel_attach }, And this is in yours: | | pciide0 at pci0 dev 31 function 2 "Intel 82081HBM RAID" rev 0x04: DMA, | | channel 0 wired to native-PCI, channel 1 wired to native-PCI | | pciide0: using apic 0 int 22 for native-PCI interrupt Although they look quite the same, 82081 != 82801. Sorry :( You could try adding the product id of your controller to ahci.c much like I did in my diff and try that. Good luck! Paul 'WEiRD' de Weerd -- >[<++>-]<+++.>+++[<-->-]<.>+++[<+ +++>-]<.>++[<>-]<+.--.[-] http://www.weirdnet.nl/
Re: "Available disks are: none" on Sony Vaio SVZ13115GGXI
On Fri, Jan 29, 2016 at 04:18:04PM +0100, Paul de Weerd wrote: > Hi Ben, > > Upon another close inspection of your dmesg and mine, I don't think > the below diff will work for you... > > This is in my machine: > > | + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_RAID, > | + NULL, ahci_intel_attach }, > > And this is in yours: > > | | pciide0 at pci0 dev 31 function 2 "Intel 82081HBM RAID" rev 0x04: DMA, > | | channel 0 wired to native-PCI, channel 1 wired to native-PCI > | | pciide0: using apic 0 int 22 for native-PCI interrupt > > Although they look quite the same, 82081 != 82801. Sorry :( > > You could try adding the product id of your controller to ahci.c much > like I did in my diff and try that. Good luck! > > Paul 'WEiRD' de Weerd They are the same, the string in pcidevs was wrong. I just commited a change to fix it.
"Available disks are: none" on Sony Vaio SVZ13115GGXI
This laptop has 2 x Samsung 128 GB SSD drives and a RAID controller which reports as "Intel Rapid Storage Technology (Option ROM version 11.0.0.1339)". OpenBSD 5.7, 5.8 and current (20160125) installers each report "Available disks are: None". Available system BIOS settings (XHCI Mode, Execute Bit Capability) and RAID BIOS settings (non-RAID, RAID) have been toggled without success. Windows recovery was used to upgrade the system BIOS to the latest available version, R0092C6. The prior version (R0091C6) behaved the same. Linux and FreeBSD detect the drives and permit partitioning. dmesg output from both OpenBSD and FreeBSD are below. Any suggestions appreciated. Thanks === OpenBSD 5.9-beta (RAMDISK_CD) #1696: Mon Jan 25 19:16:37 MST 2016 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD RTC BIOS diagnostic error 80 real mem = 8465932288 (8073MB) avail mem = 8207634432 (7827MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6960 (18 entries) bios0: vendor Insyde Corp. version "R0091C6" date 05/07/2012 bios0: Sony Corporation SVZ13115GGXI acpi0 at bios0: rev 2 acpi0: tables DSDT FACP TCPA UEFI ASF! HPET APIC MCFG SLIC WDAT SSDT BOOT SSDT ASPT FPDT SSDT SSDT SSDT SSDT acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2095.54 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (RP01) acpiprt2 at acpi0: bus 3 (RP02) acpiprt3 at acpi0: bus 5 (RP04) acpiprt4 at acpi0: bus 8 (RP07) acpiprt5 at acpi0: bus -1 (PEG0) acpiec0 at acpi0 acpisony at acpi0 not configured acpicpu at acpi0 not configured acpitz at acpi0 not configured acpibat at acpi0 not configured acpibat at acpi0 not configured acpiac at acpi0 not configured acpibtn at acpi0 not configured acpibtn at acpi0 not configured pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation) "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi pci1 at ppb0 bus 2 iwn0 at pci1 dev 0 function 0 "Intel Centrino Advanced-N 6235" rev 0x24: msi, MIMO 2T2R, AGN, address c4:85:08:a1:a1:f8 ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi pci2 at ppb1 bus 3 rtsx0 at pci2 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: msi sdmmc0 at rtsx0 ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi pci3 at ppb2 bus 5 re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL (0x2c80), msi, address 54:53:ed:1c:10:4d rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 ppb3 at pci0 dev 28 function 6 "Intel 7 Series PCIE" rev 0xc4: msi pci4 at ppb3 bus 8 ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 20 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 "Intel HM77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured pciide0 at pci0 dev 31 function 2 "Intel 82081HBM RAID" rev 0x04: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 0 int 22 for native-PCI interrupt "Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay1 uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2 "vendor 0x08ff Fingerprint Sensor" rev 2.00/25.01 addr 3 at uhub2 port 1 not configured "vendor 0x8087 product 0x07da" rev 2.00/78.69 addr 4 at uhub2 port 2 not configured "1458529110CR48AR USB2.0 Camera" rev 2.00/0.12 addr 5 at uhub2 port 3 not configured uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2 umass0 at uhub3 port 1 configuration 1 interface 0 "USB Flash Disk" rev 2.00/2.00 addr 3 umass0: using SCSI over Bulk-Only scsibus0 at umass0: