Hi Misc@,
I'am currently running 23rd May i386-current, and I experience some
booting speed up, and some changes in BGP, and yes, I'am aware of bgpd
current code update.
So, What I did was;
$ bgpctl sh rib 129.128.0.0
flags: * = Valid, > = Selected, I = via IBGP, A = Announced
origin: i = IGP, e = EGP, ? = Incomplete
flags destination gateway lpref med aspath origin
$ bgpctl sh fib 129.128.5.0
flags: * = valid, B = BGP, C = Connected, S = Static
N = BGP Nexthop reachable via this route
r = reject route, b = blackhole route
flags prio destination gateway
*B 48 129.128.0.0/16 202.149.67.121
$ route -nv get 129.128.0.0
so_dst: inet 129.128.0.0; so_ifp: link ; RTM_GET: Report Metrics: len 124,
priority 0, table 0, pid: 0, seq 1, errno 0
flags:<UP,GATEWAY,HOST,STATIC>
locks: inits:
sockaddrs: <DST,IFP>
129.128.0.0 link#0
route to: 129.128.0.0
destination: 129.128.0.0
mask: 255.255.0.0
gateway: 202.149.67.121
interface: em1
if address: 202.149.67.123
priority: 48 (bgp)
flags: <GATEWAY,DONE>
label: international
use mtu expire
15 0 0
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK,IFP,IFA,LABEL>
129.128.0.0 202.149.67.121 255.255.0.0 00:07:e9:0f:44:e3 202.149.67.123
international
Obviously bgpctl can't view RIB, but, if I use "bgpctl sh rib" all the
prefixes are coming out. FIB is viewable, routes are installed to the
Kernel FIB. It's the same on 21st May i386-current kernel(and userland),
not happening in 6th May i386-current. Dmesg Attached.
Thanks,
--
insandotpraja(at)gmaildotcom
OpenBSD 4.5-current (GENERIC) #27: Sat May 23 21:50:01 WIT 2009
r...@border-rf.mygreenlinks.net:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR
real mem = 1069002752 (1019MB)
avail mem = 1025314816 (977MB)
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/13/07, SMBIOS rev. 2.4 @
0x3fbe4000 (42 entries)
bios0: vendor Intel Corporation version
"S3000.86B.02.00.0051.091720081311" date 09/17/2008
bios0: Intel S3000AH
acpi0 at bios0: rev 2
acpi0: tables DSDT SLIC FACP APIC WDDT HPET MCFG ASF! SSDT SSDT SSDT SSDT
SSDT HEST BERT ERST EINJ
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S1) PEX4(S4) PEX5(S4)
UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) AC9M(S4) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 5
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus -1 (PEX1)
acpiprt4 at acpi0: bus -1 (PEX2)
acpiprt5 at acpi0: bus -1 (PEX3)
acpiprt6 at acpi0: bus 2 (PEX4)
acpiprt7 at acpi0: bus 3 (PEX5)
acpicpu0 at acpi0: FVS, 3000, 2400 MHz
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0x00
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 5 int
17 (irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 5 int 17
(irq 255)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 5 int 16
(irq 255)
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 5
int 17 (irq 9), address 00:15:17:49:04:0d
"Intel 82573E Serial" rev 0x03 at pci3 dev 0 function 3 not configured
"Intel 82573E KCS" rev 0x03 at pci3 dev 0 function 4 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 5 int
23 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 5 int
19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 5 int
18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 5 int
16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 5 int
23 (irq 11)
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 4
skc0 at pci4 dev 0 function 0 "D-Link Systems DGE-530T B1" rev 0x11, Yukon
Lite (0x9): apic 5 int 21 (irq 11)
sk0 at skc0 port A: address 00:1c:f0:11:6c:d4
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5
em1 at pci4 dev 1 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: apic 5
int 22 (irq 11), address 00:07:e9:0f:44:e3
vga1 at pci4 dev 4 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 5 int 18 (irq 11)
drm0 at radeondrm0
em2 at pci4 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 5
int 17 (irq 9), address 00:15:17:49:04:0e
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configur
ed to compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-H30N, 1.00> ATAPI
5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured
to native-PCI
pciide1: using apic 5 int 19 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3160211AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 5
int 19 (irq 10)
iic0 at ichiic0
adt0 at iic0 addr 0x2e: sch5027 rev 0x69
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
