Hi guys,
After upgrading my -current system to the newest snapshot the system crashes
on while booting the kernel. This is an amd64 on an Gigabyte GA-K8NMF. Is
this problem known already (haven't found anything in last days mails)?
This happens for bsd and bsd.mp, but not bsd.rd!
If you need further infos, I'd be happy to provide them!
Regards, Stephan
>> OpenBSD/amd64 BOOT 2.11
boot> boot
booting hd0a:/bsd: 3697028+694336+601400+0+422832 [80+308208+189663]=0x9a3fd0
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, be60a304]{[ using
498720 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.9 (GENERIC) #450: Mon Feb 27 14:07:30 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2147020800 (2096700K)
avail mem = 1835884544 (1792856K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 1809.48 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 10, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 11
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: irq 12,
nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6B200P0>
wd0: 16-sector PIO, LBA48, 194479MB, 398294975 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4120B, A111> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
skc0 at pci1 dev 7 function 0 "Schneider & Koch SK-98xx v2.0" rev 0x10,
Marvell Yukon (0x1): irq 11
sk0 at skc0 port A, address 00:00:5a:9f:01:bc
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 5, address
00:14:85:0c:12:fe
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 vendor "NVIDIA", unknown product 0x0161 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0panic: isadmaattach: can not create DMA map
Stopped at Debugger+0x5: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
Debugger() at Debugger+0x5
panic() at panic+0x12a
isadmaattach() at isadmaattach+0x87
config_attach() at config_attach+0x10f
isascan() at isascan+0x14d
config_scan() at config_scan+0xce
config_attach() at config_attach+0x10f
pcib_callback() at pcib_callback+0x4e
config_process_deferred_children() at config_process_deferred_children+0x5f
config_attach() at config_attach+0x117
mainbus_attach() at mainbus_attach+0x121
config_attach() at config_attach+0x10f
cpu_configure() at cpu_configure+0x1c
main() at main+0x35c
end trace frame: 0x0, count: -14
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80204 swapper
ddb>
