Re: Dell Latitude D520
My old Intel ipw2100 worked with openbsd 4.0/4.1 and this access point. My new Intel card doesn't. I don't know what it is because scanning is possible. I also see the SSID of my network but "ifconfig up" doesn't work. Could it be the firmware? s -- GnuPG: 5755FB64 Per aspera ad astra.
Re: Dell Latitude D520
At 04:16 PM 3/23/07, Simon Effenberg wrote: On Fri, Mar 23, 2007 at 01:32:33PM -0400, Frank Bax wrote: > 3) dmesg indicates Intel PRO/Wireless 3945ABG rev 0x02 > I downloaded wpi-firmware-1.13 and installed the package; but when I try to > bring up the device: > $ sudo ifconfig wpi0 up > $ dmesg | tail > wpi0: timeout waiting for thermal sensors calibration > wpi0: timeout waiting for thermal sensors calibration > wpi0: fatal firmware error > I have the same Intel card and when I am near an weird access point i get the same error messages but at home it works. Could be the AP what makes your card crazy. This is not good news. The router at home is running OpenBSD 4.0! OpenBSD 4.0 router (P2-400): $ dmesg | grep ral ral0 at pci0 dev 20 function 0 "Ralink RT2560" rev 0x01: irq 10, address 00:12:17:99:70:2d ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 $ cat /etc/hostname.ral0 inet 10.0.0.2 255.255.255.0 10.0.0.255 media DS2 mediaopt hostap mode 11b nwid XX1XX nwkey XX2XX $ ifconfig ral0 ral0: flags=8843 mtu 1500 lladdr 00:12:17:99:70:2d media: IEEE802.11 DS2 mode 11b hostap (autoselect mode 11b hostap) status: active ieee80211: nwid XX1XX chan 2 bssid 00:12:17:99:70:2d nwkey displayed> 100dBm inet 10.0.0.2 netmask 0xff00 broadcast 10.0.0.255 inet6 fe80::212:17ff:fe99:702d%ral0 prefixlen 64 scopeid 0x3 We have a WinXP laptop already working through this interface. On the Dell laptop running 4.1 snapshot: $ dmesg | grep wpi wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2 int 17 (irq 11), address 00:19:d2:6a:e0:f3 $ sudo ifconfig wpi0 nwid XX1XX nwkey XX2XX chan 2 up $ ifconfig wpi0 wpi0: flags=8802 mtu 1500 lladdr 00:19:d2:6a:e0:f3 groups: wlan media: IEEE802.11 autoselect status: no network ieee80211: nwid XX1XX chan 2 nwkey 100dBm inet6 fe80::219:d2ff:fe6a:e0f3%wpi0 prefixlen 64 scopeid 0x1 $ dmesg | tail wpi0: timeout waiting for thermal sensors calibration wpi0: fatal firmware error
Re: Dell Latitude D520
Thanks! 4.1 didn't initially change anything; but ACPI enabled fixed both #1 and #2. At 04:03 PM 3/23/07, Marco Peereboom wrote: You really need to run 4.1 on that machine; probably even with ACPI enabled. On Fri, Mar 23, 2007 at 01:32:33PM -0400, Frank Bax wrote: > I installed 4.0 release on Dell Latitude D520 and found these issues: > > 1) Reboot will display messages about disk resync; monitor goes blank and > then hangs until I press power off twice to reboot. > > 2) Laptop has a Core2Duo T5500 but only one processor is detected with MP > kernel. > > 3) dmesg indicates Intel PRO/Wireless 3945ABG rev 0x02 > I downloaded wpi-firmware-1.13 and installed the package; but when I try > to bring up the device: > $ sudo ifconfig wpi0 up > $ dmesg | tail > wpi0: timeout waiting for thermal sensors calibration > wpi0: timeout waiting for thermal sensors calibration > wpi0: fatal firmware error > > I'm in the process of downloading current snapshot to see what happens.
Re: Dell Latitude D520
On Fri, Mar 23, 2007 at 01:32:33PM -0400, Frank Bax wrote: > 3) dmesg indicates Intel PRO/Wireless 3945ABG rev 0x02 > I downloaded wpi-firmware-1.13 and installed the package; but when I try to > bring up the device: > $ sudo ifconfig wpi0 up > $ dmesg | tail > wpi0: timeout waiting for thermal sensors calibration > wpi0: timeout waiting for thermal sensors calibration > wpi0: fatal firmware error > I have the same Intel card and when I am near an weird access point i get the same error messages but at home it works. Could be the AP what makes your card crazy. s -- GnuPG: 5755FB64 Per aspera ad astra. [demime 1.01d removed an attachment of type application/pgp-signature]
Re: Dell Latitude D520
You really need to run 4.1 on that machine; probably even with ACPI
enabled.
On Fri, Mar 23, 2007 at 01:32:33PM -0400, Frank Bax wrote:
> I installed 4.0 release on Dell Latitude D520 and found these issues:
>
> 1) Reboot will display messages about disk resync; monitor goes blank and
> then hangs until I press power off twice to reboot.
>
> 2) Laptop has a Core2Duo T5500 but only one processor is detected with MP
> kernel.
>
> 3) dmesg indicates Intel PRO/Wireless 3945ABG rev 0x02
> I downloaded wpi-firmware-1.13 and installed the package; but when I try
> to bring up the device:
> $ sudo ifconfig wpi0 up
> $ dmesg | tail
> wpi0: timeout waiting for thermal sensors calibration
> wpi0: timeout waiting for thermal sensors calibration
> wpi0: fatal firmware error
>
> I'm in the process of downloading current snapshot to see what happens.
>
> OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a2506000a25
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 1667 MHz (1292 mV): speeds: 1667, 1000 MHz
> real mem = 1063690240 (1038760K)
> avail mem = 962273280 (939720K)
> using 4256 buffers containing 53288960 bytes (52040K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/18/06, BIOS32 rev. 0 @
> 0xffa10, SMBIOS rev. 2.4 @ 0xf70c0 (61 entries)
> bios0: Dell Inc. Latitude D520
> pcibios0 at bios0: rev 2.1 @ 0xf/0x1
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfaae0/192 (10 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev
> 0x00)
> pcibios0: PCI bus #12 is the last bus
> bios0: ROM list: 0xc/0xf000! 0xcf000/0x1000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
> 0xeff0, size 0x1000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Sigmatel STAC9220 (rev. 34.1), HDA version 1.0
> azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9
> azalia0: codec[1]: No support for modem function groups
> azalia0: codec[1]: No audio function groups
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
> pci1 at ppb0 bus 11
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01
> pci2 at ppb1 bus 12
> wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq
> 11, address 00:19:d2:6a:e0:f3
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 5
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 3
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
> pci3 at ppb2 bus 2
> bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 11,
> address 00:19:b9:53:ab:18
> bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
> cbb0 at pci3 dev 1 function 0 vendor "O2 Micro", unknown product 0x7135
> rev 0x
Dell Latitude D520
I installed 4.0 release on Dell Latitude D520 and found these issues:
1) Reboot will display messages about disk resync; monitor goes blank and
then hangs until I press power off twice to reboot.
2) Laptop has a Core2Duo T5500 but only one processor is detected with MP
kernel.
3) dmesg indicates Intel PRO/Wireless 3945ABG rev 0x02
I downloaded wpi-firmware-1.13 and installed the package; but when I try to
bring up the device:
$ sudo ifconfig wpi0 up
$ dmesg | tail
wpi0: timeout waiting for thermal sensors calibration
wpi0: timeout waiting for thermal sensors calibration
wpi0: fatal firmware error
I'm in the process of downloading current snapshot to see what happens.
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a2506000a25
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1667 MHz (1292 mV): speeds: 1667, 1000 MHz
real mem = 1063690240 (1038760K)
avail mem = 962273280 (939720K)
using 4256 buffers containing 53288960 bytes (52040K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/18/06, BIOS32 rev. 0 @
0xffa10, SMBIOS rev. 2.4 @ 0xf70c0 (61 entries)
bios0: Dell Inc. Latitude D520
pcibios0 at bios0: rev 2.1 @ 0xf/0x1
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfaae0/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #12 is the last bus
bios0: ROM list: 0xc/0xf000! 0xcf000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
0xeff0, size 0x1000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Sigmatel STAC9220 (rev. 34.1), HDA version 1.0
azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 11
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 12
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq
11, address 00:19:d2:6a:e0:f3
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 3
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 2
bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 11,
address 00:19:b9:53:ab:18
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
cbb0 at pci3 dev 1 function 0 vendor "O2 Micro", unknown product 0x7135 rev
0x21: irq 5
vendor "O2 Micro", unknown product 0x00f7 (class serial bus subclass
Firewire, rev 0x02) at pci3 dev 1 function 4 not configured
cbb0: bad Vcc request. sock_ctrl 0x501aa88, sock_status 0x50123e9
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 d
