Re: Dell R200 ipmi
The Dell Poweredge R200 has a ipmi board but ipmi at mainbus0 not configured Is there some new stuff in current to support the ipmi on R200 ? especially the watchdog feature. Or patch waiting to be tested ? Thank for the information. I enabled ipmi in the kernel with config. A related question: I have a R200 and a soekris. On both box, I launch watchdogd. On both the same output: # sysctl kern.watchdog kern.watchdog.period=30 kern.watchdog.auto=0 But if i do # kill -STOP pid of watchdogd the soekris reboot and not the R200 On the R200, if I do # sysctl -w kern.watchdog.auto=1 then # kill -STOP pid of watchdogd then the R200 reboot too. Any explanation ? Or is it a bug ? JG
Re: Dell R200 ipmi
On 2008-10-06, Jean-Girard Pailloncy [EMAIL PROTECTED] wrote: The Dell Poweredge R200 has a ipmi board but ipmi at mainbus0 not configured Is there some new stuff in current to support the ipmi on R200 ? especially the watchdog feature. Or patch waiting to be tested ? ipmi is compiled-in to GENERIC but marked as disabled, due to a problem on some machines. You can try boot -c at the boot loader and enable ipmi then, if it works, edit the on-disk kernel with config -e.
Dell R200 ipmi
Hi, The Dell Poweredge R200 has a ipmi board but ipmi at mainbus0 not configured Is there some new stuff in current to support the ipmi on R200 ? especially the watchdog feature. Or patch waiting to be tested ? JG
Re: Dell R200
On Fri, Apr 25 2008 at 45:17, Mart?n Coco wrote: Hi misc, Hi, I'll be buying a couple of Dell R200 Rackmount servers to use as firewalls/routers. I found this thread in the archives about it: http://marc.info/?l=openbsd-miscm=120167827217058w=2 And it seems to be working with snapshots. But my question is: will it be supported by the 4.3 release? We're not used to run -current on our firewalls, and we'd prefer to continue with -release and -stable. We tested r200 servers this week with a 4.3 stable release. It seems to work fine for the moment. Claer
Dell R200
Hi misc, I'll be buying a couple of Dell R200 Rackmount servers to use as firewalls/routers. I found this thread in the archives about it: http://marc.info/?l=openbsd-miscm=120167827217058w=2 And it seems to be working with snapshots. But my question is: will it be supported by the 4.3 release? We're not used to run -current on our firewalls, and we'd prefer to continue with -release and -stable. Thank you, Martmn.