Re: HP DL 380 G3 + OpenBSD 3.8

2005-10-26 Thread Лебедев Андрей Германович 

Thanks all! The problem is solved by recustomizing IRQ in BIOS.
# dmesg | grep bge1
bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2 
(0x1002): irq 7 address 00:0e:7f:ad:0e:e3

brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1: flags=8843 mtu 1500
   lladdr 00:0e:7f:ad:0e:e3
   media: Ethernet autoselect (100baseTX full-duplex)
   status: active

- Original Message - 
From: "Bill Marquette" <[EMAIL PROTECTED]>

To: "lEBEDEW aNDREJ gERMANOWI^" <[EMAIL PROTECTED]>
Cc: 
Sent: Wednesday, October 26, 2005 5:51 PM
Subject: Re: HP DL 380 G3 + OpenBSD 3.8



On 10/26/05, lEBEDEW aNDREJ gERMANOWI^ <[EMAIL PROTECTED]> wrote:
My problem (!!!) - bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 
0x02:

couldn't establish interrupt at irq 15.
Howto ? RTFM ? Help me!


In the Compaq BIOS, make sure nothing is configured for IRQ 15.  It's
an annoying issue I've seen with the DL380's - none of my boxes can
have _anything_ configured for IRQ15.  The G4's make the choice
easier, they only allow 5 and 7 if I recall ;)

--Bill

Re: HP DL 380 G3 + OpenBSD 3.8

2005-10-26 Thread Bill Marquette 
On 10/26/05, lEBEDEW aNDREJ gERMANOWI^ <[EMAIL PROTECTED]> wrote:
> My problem (!!!) - bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 0x02:
> couldn't establish interrupt at irq 15.
> Howto ? RTFM ? Help me!

In the Compaq BIOS, make sure nothing is configured for IRQ 15.  It's
an annoying issue I've seen with the DL380's - none of my boxes can
have _anything_ configured for IRQ15.  The G4's make the choice
easier, they only allow 5 and 7 if I recall ;)

--Bill

Re: HP DL 380 G3 + OpenBSD 3.8

2005-10-26 Thread Лебедев Андрей Германович 

Thx! IRQ = 7 all work OK!
- Original Message - 
From: "Uwe Dippel" <[EMAIL PROTECTED]>

To: 
Sent: Wednesday, October 26, 2005 12:43 PM
Subject: Re: HP DL 380 G3 + OpenBSD 3.8


My problem (!!!) - bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 
0x02:

couldn't establish interrupt at irq 15.
Howto ? RTFM ? Help me!


Try to set it to a different IRQ in the BIOS.
The whole matter is strange on irq15, which is usually for secondary IDE.

Uwe

__ CC-C4C.C0C,C C6C(C? NOD32 1.1208 (20050902) __

CC2C. C1C.C.C!C9C%C-C(C% C/C0C.C"C%C0C%C-C. CC-C2C(C"C(C0C3C1C-C.C) 
C1C(C1C2C%C,C.C) NOD32.
http://www.eset.com

Re: HP DL 380 G3 + OpenBSD 3.8

2005-10-26 Thread Uwe Dippel 
> My problem (!!!) - bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 0x02:
> couldn't establish interrupt at irq 15.
> Howto ? RTFM ? Help me!

Try to set it to a different IRQ in the BIOS.
The whole matter is strange on irq15, which is usually for secondary IDE.

Uwe

HP DL 380 G3 + OpenBSD 3.8

2005-10-26 Thread Лебедев Андрей Германович 
Hello! I'm have problem :( My server is HP DL380 G3.
#uname -a
OpenBSD .econmos.com 3.8 GENERIC#202 i386
#dmesg
OpenBSD 3.8-current (GENERIC) #202: Wed Oct 19 17:52:24 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.05 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 2147041280 (2096720K)
avail mem = 1953165312 (1907388K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf
pcibios0 at bios0: rev 2.1 @ 0xf/0x2000
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc/0x8000 0xc8000/0x4000 0xcc000/0x1800 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci1 at pchb1 bus 3
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci2 at pchb2 bus 1
ciss0 at pci2 dev 3 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01: irq
10
ciss0: 1 LD HW rev 1 FW 2.36/2.36
lmap 4000:0 scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0:  SCSI0 0/direct
fixed
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
sd0: 104183MB, 104183 cyl, 64 head, 32 sec, 512 bytes/sec, 213367680 sec
total
vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "Compaq", unknown product 0xb203 (class system subclass miscellaneous,
rev 0x01) at pci0 dev 4 function 0 not configured
vendor "Compaq", unknown product 0xb204 (class system subclass miscellaneous,
rev 0x01) at pci0 dev 4 function 2 not configured
pcib0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0:  SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 7,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
pchb4 at pci0 dev 16 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb5 at pci0 dev 16 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci3 at pchb5 bus 6
"Compaq PCI Hotplug" rev 0x14 at pci3 dev 30 function 0 not configured
pchb6 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb7 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci4 at pchb7 bus 2
bge0 at pci4 dev 1 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): irq 11 address 00:0e:7f:ad:0e:e4
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 0x02: couldn't establish
interrupt at irq 15
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e7ed netmask efed ttymask ffef
pctr: user-level cycle counter enabled
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
# cd /usr/ports
# make search nmae=pci
The search target requires a keyword or name parameter,
e.g.: "make search key=somekeyword" "make search name=somename"
# make search name=pci
# uname -a
OpenBSD web-access-c1.investstr.econmos.com 3.8 GENERIC#202 i386
# dmesg
OpenBSD 3.8-current (GENERIC) #202: Wed Oct 19 17:52:24 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.05 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 2147041280 (2096