Re: Keyboard no longer works after upgrading xenocara to -current (amd64, hp g42 laptop)
On Tue, 25 Oct 2011 07:53:55 -0300 Gonzalo L. R. gonz...@x61.com.ar wrote: http://openbsd.org/faq/current.html#20111015 El 10/25/11 04:59, Brett escribis: Hi, Yesterday morning, I updated my source tree, (after the recent changes to xenocara shown at http://marc.info/?l=openbsd-cvsm=131938646714330w=2) and rebuilt kernel, userland, and xenocara (rebooting before doing each build). I had previously recompiled kernel and userland about a week earlier, though up till that point xenocara was still running from the version installed from 8th Oct snapshot CD. Upon booting into XFCE, the keyboard would not respond (inbuilt laptop keyboard or external usb keyboard). The mouse still works fine - so I can open xterm or xfce4-terminal from the start menu, but then I try to type and nothing happens. Ctrl-alt-backspace does not work but I can still shut down cleanly by pressing the power button. Sorry forgot the faq/current page existed and so didn't check it. Never had a situation where I needed to follow its instructions before, usually the upgrading to current just works!
Keyboard no longer works after upgrading xenocara to -current (amd64, hp g42 laptop)
Hi, Yesterday morning, I updated my source tree, (after the recent changes to xenocara shown at http://marc.info/?l=openbsd-cvsm=131938646714330w=2) and rebuilt kernel, userland, and xenocara (rebooting before doing each build). I had previously recompiled kernel and userland about a week earlier, though up till that point xenocara was still running from the version installed from 8th Oct snapshot CD. Upon booting into XFCE, the keyboard would not respond (inbuilt laptop keyboard or external usb keyboard). The mouse still works fine - so I can open xterm or xfce4-terminal from the start menu, but then I try to type and nothing happens. Ctrl-alt-backspace does not work but I can still shut down cleanly by pressing the power button. XFCE rebuilt from ports after this problem showed the same behaviour. I then tried doing startx into the base FVWM window system ($ startx after removing my .xinitrc file), and still no keyboard. I'm not complaining, just wanted to report the problem. :-) Happy to test patches if you have some. Brett. OpenBSD 5.0-current (GENERIC.MP) #1: Mon Oct 24 11:20:31 EST 2011 r...@hp.crossmonster.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80clock_battery real mem = 2946756608 (2810MB) avail mem = 2854227968 (2722MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe8320 (22 entries) bios0: vendor Hewlett-Packard version F.17 date 11/07/2010 bios0: Hewlett-Packard HP G42 Notebook PC acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT acpi0: wakeup devices PB2_(S5) PB3_(S4) PB5_(S5) PB6_(S4) USB0(S3) USB1(S3) USB4(S3) USB5(S3) USB6(S3) PS2K(S3) PS2M(S3) P2P_(S5) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpihpet0 at acpi0: 14318180 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Turion(tm) II P540 Dual-Core Processor, 2394.42 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD Turion(tm) II P540 Dual-Core Processor, 2394.02 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative ioapic0 at mainbus0: apid 4 pa 0xfec0, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpimcfg0 at acpi0 addr 0xf700, bus 0-15 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus -1 (PB2_) acpiprt3 at acpi0: bus -1 (PB3_) acpiprt4 at acpi0: bus 2 (PB5_) acpiprt5 at acpi0: bus 3 (PB6_) acpiprt6 at acpi0: bus 4 (P2P_) acpiec0 at acpi0 acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpitz0 at acpi0acpitz0: THRM: failed to read _CRT : no critical temperature defined acpibtn0 at acpi0: PWRB acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model Primary serial type NiMH oem Hewlett-Packard acpibtn1 at acpi0: LID_ acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: VGA_ acpivideo2 at acpi0: VGA_ cpu0: 2394 MHz: speeds: 2400 2200 1900 1500 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 AMD RS880 Host rev 0x00 ppb0 at pci0 dev 1 function 0 AMD RS780 PCIE rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 ATI Mobility Radeon HD 4200 rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 4 int 18 drm0 at radeondrm0 azalia0 at pci1 dev 5 function 1 ATI Radeon HD 4200 HD Audio rev 0x00: msi azalia0: no supported codecs ppb1 at pci0 dev 5 function 0 AMD RS780 PCIE rev 0x00: msi pci2 at ppb1 bus 2 athn0 at pci2 dev 0 function 0 Atheros AR9285 rev 0x01: apic 4 int 17 athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 4c:0f:6e:61:40:ac ppb2 at pci0 dev 6 function 0 AMD RS780 PCIE rev 0x00: msi pci3 at ppb2 bus 3 re0 at pci3 dev 0 function 0 Realtek 8101E rev 0x02: RTL8102EL (0x2480), apic 4 int 18, address 3c:4a:92:59:48:0f rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ahci0 at pci0 dev 17 function 0 ATI SBx00 SATA rev 0x00: apic 4 int 19, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: ATA, SAMSUNG HM321HI, 2AJ1 SCSI3 0/direct fixed naa.50024e9203b7cb23 sd0: 305245MB, 512 bytes/sector, 625142448 sectors cd0 at scsibus0
Re: Keyboard no longer works after upgrading xenocara to -current (amd64, hp g42 laptop)
On Tue, Oct 25, 2011 at 18:59:48 +1100, Brett wrote: [...] installed from 8th Oct snapshot CD. Upon booting into XFCE, the keyboard would not respond (inbuilt laptop keyboard or external usb [...] There is a workaround for this [1]: # mv /usr/X11R6/share/X11/xkb /usr/X11R6/share/X11/xkb_orig # cd /usr/xenocara/data/xkeyboard-config make build make install This assumes you have the xenocara sources in /usr/xenocara. HTH, Daniel [1] http://marc.info/?l=openbsd-cvsm=131914643624601w=2 -- LIVAI Daniel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F
Re: Keyboard no longer works after upgrading xenocara to -current (amd64, hp g42 laptop)
On Tue, Oct 25, 2011 at 18:59:48 +1100, Brett wrote: installed from 8th Oct snapshot CD. Upon booting into XFCE, the keyboard would not respond (inbuilt laptop keyboard or external usb [...] There is a workaround for this [1]: # mv /usr/X11R6/share/X11/xkb /usr/X11R6/share/X11/xkb_orig # cd /usr/xenocara/data/xkeyboard-config make build make install This assumes you have the xenocara sources in /usr/xenocara. HTH, Daniel [1] http://marc.info/?l=openbsd-cvsm=131914643624601w=2 Thanks, Daniel, works fine again after doing that. Brett.
Re: Keyboard no longer works after upgrading xenocara to -current (amd64, hp g42 laptop)
http://openbsd.org/faq/current.html#20111015 El 10/25/11 04:59, Brett escribis: Hi, Yesterday morning, I updated my source tree, (after the recent changes to xenocara shown at http://marc.info/?l=openbsd-cvsm=131938646714330w=2) and rebuilt kernel, userland, and xenocara (rebooting before doing each build). I had previously recompiled kernel and userland about a week earlier, though up till that point xenocara was still running from the version installed from 8th Oct snapshot CD. Upon booting into XFCE, the keyboard would not respond (inbuilt laptop keyboard or external usb keyboard). The mouse still works fine - so I can open xterm or xfce4-terminal from the start menu, but then I try to type and nothing happens. Ctrl-alt-backspace does not work but I can still shut down cleanly by pressing the power button. XFCE rebuilt from ports after this problem showed the same behaviour. I then tried doing startx into the base FVWM window system ($ startx after removing my .xinitrc file), and still no keyboard. I'm not complaining, just wanted to report the problem. :-) Happy to test patches if you have some. Brett. OpenBSD 5.0-current (GENERIC.MP) #1: Mon Oct 24 11:20:31 EST 2011 r...@hp.crossmonster.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80clock_battery real mem = 2946756608 (2810MB) avail mem = 2854227968 (2722MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe8320 (22 entries) bios0: vendor Hewlett-Packard version F.17 date 11/07/2010 bios0: Hewlett-Packard HP G42 Notebook PC acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT acpi0: wakeup devices PB2_(S5) PB3_(S4) PB5_(S5) PB6_(S4) USB0(S3) USB1(S3) USB4(S3) USB5(S3) USB6(S3) PS2K(S3) PS2M(S3) P2P_(S5) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpihpet0 at acpi0: 14318180 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Turion(tm) II P540 Dual-Core Processor, 2394.42 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD Turion(tm) II P540 Dual-Core Processor, 2394.02 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative ioapic0 at mainbus0: apid 4 pa 0xfec0, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpimcfg0 at acpi0 addr 0xf700, bus 0-15 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus -1 (PB2_) acpiprt3 at acpi0: bus -1 (PB3_) acpiprt4 at acpi0: bus 2 (PB5_) acpiprt5 at acpi0: bus 3 (PB6_) acpiprt6 at acpi0: bus 4 (P2P_) acpiec0 at acpi0 acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpitz0 at acpi0acpitz0: THRM: failed to read _CRT : no critical temperature defined acpibtn0 at acpi0: PWRB acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model Primary serial type NiMH oem Hewlett-Packard acpibtn1 at acpi0: LID_ acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: VGA_ acpivideo2 at acpi0: VGA_ cpu0: 2394 MHz: speeds: 2400 2200 1900 1500 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 AMD RS880 Host rev 0x00 ppb0 at pci0 dev 1 function 0 AMD RS780 PCIE rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 ATI Mobility Radeon HD 4200 rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 4 int 18 drm0 at radeondrm0 azalia0 at pci1 dev 5 function 1 ATI Radeon HD 4200 HD Audio rev 0x00: msi azalia0: no supported codecs ppb1 at pci0 dev 5 function 0 AMD RS780 PCIE rev 0x00: msi pci2 at ppb1 bus 2 athn0 at pci2 dev 0 function 0 Atheros AR9285 rev 0x01: apic 4 int 17 athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 4c:0f:6e:61:40:ac ppb2 at pci0 dev 6 function 0 AMD RS780 PCIE rev 0x00: msi pci3 at ppb2 bus 3 re0 at pci3 dev 0 function 0 Realtek 8101E rev 0x02: RTL8102EL (0x2480), apic 4 int 18, address 3c:4a:92:59:48:0f rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ahci0 at pci0 dev 17 function 0 ATI SBx00 SATA rev 0x00: apic 4 int 19, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0:ATA, SAMSUNG HM321HI, 2AJ1 SCSI3 0/direct fixed
