Hi,
Let me know if I should be posting this elsewhere.
I'm running OpenBSD 4.5 i386 on an IBM x336 server, as newer versions
don't work with the Broadcom network interfaces [1]. I installed it
about a week ago, and everything was working great until I got the
following on the console (retyped). I ran a trace as per the FAQ:
[lots of vlan: lines; probably me adding the interfaces a few days ago]
vlan80: initialized with non-standard mtu 1496 (parent trunk0)
vlan85: initialized with non-standard mtu 1496 (parent trunk0)
vlan61: initialized with non-standard mtu 1496 (parent trunk0)
vlan1: initialized with non-standard mtu 1496 (parent trunk0)
uvm_fault(0xd080d9e0, 0x0, 0, 1) - e
kernel: page fault trap, code=0
Stopped at arp_rtrequest+0xfb: movb 0x64(%eax),%al
ddb pckbc_start: command error
ddb trace
arp_rtrequest(b,d8382048,de164df0,0) at arp_rtrequest+0xfb
rtrequest1(b,de164df0,38,de164dec,0,d2ac0400,d0202de9,60) at rtrequest1+0x1f2
rtalloc1(d081a508,1,0,d839a68c) at rtalloc1+0xb6
rtalloc_mpath(d081a504,d869881c,0,d839a68c,0) at rtalloc_mpath+0x2f
ip_forward(d861fa00,0,de164f10,0,204) at ip_forward+0xd8
ipv4_input(d861fa00,d2a73640,d08c2b54,d8a312b8) at ipv4_input+0x26e
ipintr(d0350058,d08c0010,d06f0010,de160010,d8a312b8) at ipintr+0x64
Bad frame pointer: 0xde164f28
ddb
dmesg output is below [2]. Is this a known problem that's fixed in 4.7?
Cheers,
Patrick
1. http://kerneltrap.org/mailarchive/openbsd-misc/2010/3/12/6350403/thread
2.
patr...@ceti-a:~[0]$ dmesg
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz (GenuineIntel 686-class) 3.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem = 2146832384 (2047MB)
avail mem = 2067619840 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/19/05, BIOS32 rev. 0 @
0xfd711, SMBIOS rev. 2.3 @ 0xf5faa (50 entries)
bios0: vendor IBM version -[APE128AUS-1.11]- date 07/19/2005
bios0: IBM eserver xSeries 336 -[883725M]-
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 14 pa 0xfec0, version 20, 24 pins
ioapic1 at mainbus0: apid 13 pa 0xfec82000, version 20, 24 pins
ioapic2 at mainbus0: apid 12 pa 0xfec82400, version 20, 24 pins
acpiprt0 at acpi0: bus 4 (PCI2)
acpiprt1 at acpi0: bus 5 (PCI3)
acpiprt2 at acpi0: bus 1 (PCIS)
acpiprt3 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
bios0: ROM list: 0xc/0xb000 0xcb000/0x4000
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Intel E7520 Host rev 0x0c
Intel E7520 Error Reporting rev 0x0c at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 Intel E7520 PCIE rev 0x0c
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 Intel E7520 PCIE rev 0x0c
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 Intel PCIE-PCIE rev 0x09
pci3 at ppb2 bus 4
mpi0 at pci3 dev 1 function 0 Symbios Logic 53c1030 rev 0x08: apic
13 int 4 (irq 11)
scsibus0 at mpi0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: LSILOGIC, 1030 IM IM, 1000 SCSI2 0/direct fixed
sd0: 139898MB, 512 bytes/sec, 286511104 sec total
safte0 at scsibus0 targ 8 lun 0: IBM, 25P3495a S320 1, 1 SCSI2
3/processor fixed
mpi0: phys disk 0 Sync at 160MHz width 16bit offset 127 QAS 0 DT 1 IU 1
mpi0: phys disk 1 Sync at 160MHz width 16bit offset 80 QAS 0 DT 1 IU 1
ppb3 at pci2 dev 0 function 2 Intel PCIE-PCIE rev 0x09
pci4 at ppb3 bus 5
ppb4 at pci0 dev 6 function 0 Intel E7520 PCIE rev 0x0c
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 Broadcom BCM5721 rev 0x11, BCM5750 B1
(0x4101): apic 14 int 16 (irq 11), address 00:14:5e:32:98:fa
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 Intel E7520 PCIE rev 0x0c
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 Broadcom BCM5721 rev 0x11, BCM5750 B1
(0x4101): apic 14 int 16 (irq 11), address 00:14:5e:32:98:fb
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
Intel E7520 Config rev 0x0c at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 Intel 82801EB/ER USB rev 0x02: apic
14 int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 Intel 82801EB/ER USB rev 0x02: apic
14 int 19 (irq 3)
ehci0 at pci0 dev 29 function 7 Intel 82801EB/ER USB2 rev 0x02: apic
14 int 23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 ATI Radeon VE rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100