Re: Problem upgrading to today's snapshot on VirtualBox 6 installation (kernel panic)
On Mon, Jan 14, 2019 at 12:16:29PM +0100, Andreas Kusalananda Kähäri wrote: > On Mon, Jan 14, 2019 at 10:25:03AM +0100, Andreas Kusalananda Kähäri wrote: > > > > Hi, > > > > Today's snapshot, timestamped "14/01/2019, 08:18:00" on the > > ftp.eu.openbsd.org mirror, fails to do an upgrade on my VirtualBox 6 > > amd64 installation (which I'm running on top of macOS Mojave). The snapshot dated "14/01/2019, 21:38:00" on ftp.eu.openbsd.org no longer exhibit this issue. Thanks. > > > > The installation gets to the stage where I'm supposed to get to select > > the bits to install, but before it gets there, the machine resets. > > > > The VirtualBox log says "ACPI: Reset initiated by ACPI" when this > > happens when upgrading using install64.iso, but this is missing when > > I tried using cd64.iso so I'm not sure it's related (same behaviour > > though, the machine resets). > > > > I saw a backed out libc commit by Otto with the comment "Unbreak > > tree. Last minute changes are evil", but I'm not sure this is related > > either, or whether the backed out commit made it into the snapshot > > (probably not). > > The new snapshot, "14/01/2019, 10:38:00", also does not work. Same > "ACPI: Reset initiated by ACPI" in the VirtualBox log. This time I > managed to capture a kernel panic by hooking up a serial console: > > Let's upgrade the sets! > Location of sets? (cd0 disk http or 'done') [http] cd0 > cd0 > > Pathname to the sets? (or 'done') [6.4/amd64] > Select sets by entering a set name, a file name pattern or 'all'. De-select > sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'. > [X] bsd [X] base64.tgz[X] game64.tgz[X] xfont64.tgz > [X] bsd.mp[X] comp64.tgz[X] xbase64.tgz [X] xserv64.tgz > [X] bsd.rd[X] man64.tgz [X] xshare64.tgz > uvm_fault(0xff011eb92638, 0x0, 0, 1) -> e > fatal page fault in supervisor mode > trap type 6 code 0 rip 810f94c9 cs 8 rflags 10246 cr2 0 cpl 0 rsp > 8000220df600 > gsbase 0x81877ff0 kgsbase 0x0 > panic: trap type 6, code=0, pc=810f94c9 > syncing disks... done > > dump to dev 17,1 not possible > rebooting... > > > > > > > > dmesg of un-upgraded system included: > > > > > > OpenBSD 6.4-current (GENERIC.MP) #611: Sun Jan 13 10:18:36 MST 2019 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 4278124544 (4079MB) > > avail mem = 4138897408 (3947MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries) > > bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006 > > bios0: innotek GmbH VirtualBox > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S5 > > acpi0: tables DSDT FACP APIC SSDT > > acpi0: wakeup devices > > acpitimer0 at acpi0: 3579545 Hz, 32 bits > > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz, 3193.13 MHz, 06-3c-03 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,RDRAND,NXE,RDTSCP,LONG,LAHF,ABM,ITSC,FSGSBASE,AVX2,INVPCID,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: CPU supports MTRRs but not enabled by BIOS > > cpu0: apic clock running at 1000MHz > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz, 3192.88 MHz, 06-3c-03 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,RDRAND,NXE,RDTSCP,LONG,LAHF,ABM,ITSC,FSGSBASE,AVX2,INVPCID,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 0, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins, remapped > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpicpu0 at acpi0: C1(@1 halt!) > > acpicpu1 at acpi0: C1(@1 halt!) > > acpipci0 at acpi0 PCI0: 0x 0x0011 0x0001 > > acpiac0 at acpi0: AC unit online > > acpivideo0 at acpi0: GFX0 > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 > > pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 > > vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00 > > vio0 at virtio0: address 08:00:27:01:15:d1 > > virtio0: apic 2 int 19 > > "InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0 not > > configured > > piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: apic 2 int > > 23 > > iic0 at piixpm0 > > virtio1 at pci0 dev 8 function 0 "Qumranet
Re: Problem upgrading to today's snapshot on VirtualBox 6 installation (kernel panic)
On Mon, Jan 14, 2019 at 10:25:03AM +0100, Andreas Kusalananda Kähäri wrote: > > Hi, > > Today's snapshot, timestamped "14/01/2019, 08:18:00" on the > ftp.eu.openbsd.org mirror, fails to do an upgrade on my VirtualBox 6 > amd64 installation (which I'm running on top of macOS Mojave). > > The installation gets to the stage where I'm supposed to get to select > the bits to install, but before it gets there, the machine resets. > > The VirtualBox log says "ACPI: Reset initiated by ACPI" when this > happens when upgrading using install64.iso, but this is missing when > I tried using cd64.iso so I'm not sure it's related (same behaviour > though, the machine resets). > > I saw a backed out libc commit by Otto with the comment "Unbreak > tree. Last minute changes are evil", but I'm not sure this is related > either, or whether the backed out commit made it into the snapshot > (probably not). The new snapshot, "14/01/2019, 10:38:00", also does not work. Same "ACPI: Reset initiated by ACPI" in the VirtualBox log. This time I managed to capture a kernel panic by hooking up a serial console: Let's upgrade the sets! Location of sets? (cd0 disk http or 'done') [http] cd0 cd0 Pathname to the sets? (or 'done') [6.4/amd64] Select sets by entering a set name, a file name pattern or 'all'. De-select sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'. [X] bsd [X] base64.tgz[X] game64.tgz[X] xfont64.tgz [X] bsd.mp[X] comp64.tgz[X] xbase64.tgz [X] xserv64.tgz [X] bsd.rd[X] man64.tgz [X] xshare64.tgz uvm_fault(0xff011eb92638, 0x0, 0, 1) -> e fatal page fault in supervisor mode trap type 6 code 0 rip 810f94c9 cs 8 rflags 10246 cr2 0 cpl 0 rsp 8000220df600 gsbase 0x81877ff0 kgsbase 0x0 panic: trap type 6, code=0, pc=810f94c9 syncing disks... done dump to dev 17,1 not possible rebooting... > > > dmesg of un-upgraded system included: > > > OpenBSD 6.4-current (GENERIC.MP) #611: Sun Jan 13 10:18:36 MST 2019 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4278124544 (4079MB) > avail mem = 4138897408 (3947MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries) > bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006 > bios0: innotek GmbH VirtualBox > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S5 > acpi0: tables DSDT FACP APIC SSDT > acpi0: wakeup devices > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz, 3193.13 MHz, 06-3c-03 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,RDRAND,NXE,RDTSCP,LONG,LAHF,ABM,ITSC,FSGSBASE,AVX2,INVPCID,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: CPU supports MTRRs but not enabled by BIOS > cpu0: apic clock running at 1000MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz, 3192.88 MHz, 06-3c-03 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,RDRAND,NXE,RDTSCP,LONG,LAHF,ABM,ITSC,FSGSBASE,AVX2,INVPCID,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins, remapped > acpiprt0 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0: C1(@1 halt!) > acpicpu1 at acpi0: C1(@1 halt!) > acpipci0 at acpi0 PCI0: 0x 0x0011 0x0001 > acpiac0 at acpi0: AC unit online > acpivideo0 at acpi0: GFX0 > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 > pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 > vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00 > vio0 at virtio0: address 08:00:27:01:15:d1 > virtio0: apic 2 int 19 > "InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0 not > configured > piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: apic 2 int 23 > iic0 at piixpm0 > virtio1 at pci0 dev 8 function 0 "Qumranet Virtio Network" rev 0x00 > vio1 at virtio1: address 08:00:27:0f:ed:ef > virtio1: apic 2 int 16 > mpi0 at pci0 dev 20 function 0 "Symbios Logic 53c1030" rev 0x00: apic 2 int 20 > mpi0: VBox MPT Fusion, firmware 0.0.0.0 > scsibus1 at mpi0: 16 targets, initiator 7 > cd0 at scsibus1 targ 0 lun 0: SCSI3 5/cdrom removable > sd0 at scsibus1 targ 1 lun 0: SCSI3 0/direct fixed > sd0: 10240MB, 512
