Re: 4.3-stable locks when doing shutdown during X session

2008-05-03 Thread Tobias Ulmer
On Sat, May 03, 2008 at 12:04:53PM +0200, Ivo van der Sangen wrote:
 Hello,
 
 After upgrading my Thinkpad t42 to 4.3-stable I noticed that while I was 
 logged
 in through XDM and I run shutdown -hp now the screen turns black and the
 system doesn't halt properly. After rebooting the root filesystem has to be
 checked for errors, so this clearly is a bad halt.
 
 OpenBSD 4.3 (CUSTOM) #0: Fri May  2 23:37:56 CEST 2008
 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/CUSTOM
 cpu0: Intel(R) Pentium(R) M processor 1.70GHz (GenuineIntel 686-class) 1.70
 GHz
 cpu0:
 FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,
 SS,TM,SBF,EST,TM2
 real mem  = 804220928 (766MB)
 avail mem = 769052672 (733MB)
 mainbus0 at root
 bios0 at mainbus0: AT/286+ BIOS, date 07/27/05, BIOS32 rev. 0 @ 0xfd750, 
 SMBIOS
 rev. 2.33 @ 0xe0
 010 (61 entries)
 bios0: vendor IBM version 1RETDLWW (3.17 ) date 07/27/2005
 bios0: IBM 23733YG

Try updating the bios



Re: 4.3-stable locks when doing shutdown during X session

2008-05-03 Thread Ivo van der Sangen
On Sat, May 03, 2008 at 01:29:11PM +0200, Tobias Ulmer wrote:
 On Sat, May 03, 2008 at 12:04:53PM +0200, Ivo van der Sangen wrote:
  Hello,
  
  After upgrading my Thinkpad t42 to 4.3-stable I noticed that while I was 
  logged
  in through XDM and I run shutdown -hp now the screen turns black and the
  system doesn't halt properly. After rebooting the root filesystem has to be
  checked for errors, so this clearly is a bad halt.
  
  OpenBSD 4.3 (CUSTOM) #0: Fri May  2 23:37:56 CEST 2008
  [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/CUSTOM
  cpu0: Intel(R) Pentium(R) M processor 1.70GHz (GenuineIntel 686-class) 
  1.70
  GHz
  cpu0:
  FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,
  SS,TM,SBF,EST,TM2
  real mem  = 804220928 (766MB)
  avail mem = 769052672 (733MB)
  mainbus0 at root
  bios0 at mainbus0: AT/286+ BIOS, date 07/27/05, BIOS32 rev. 0 @ 0xfd750, 
  SMBIOS
  rev. 2.33 @ 0xe0
  010 (61 entries)
  bios0: vendor IBM version 1RETDLWW (3.17 ) date 07/27/2005
  bios0: IBM 23733YG
 
 Try updating the bios

I am running BIOS v3.23 now. The problem remains the same, however.

OpenBSD 4.3 (CUSTOM) #0: Fri May  2 23:37:56 CEST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/CUSTOM
cpu0: Intel(R) Pentium(R) M processor 1.70GHz (GenuineIntel 686-class) 1.70 
GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem  = 804220928 (766MB)
avail mem = 769052672 (733MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/18/07, BIOS32 rev. 0 @ 0xfd750, SMBIOS 
rev. 2.33 @ 0xe0010 (61 entries)
bios0: vendor IBM version 1RETDRWW (3.23 ) date 06/18/2007
bios0: IBM 23733YG
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82371FB ISA rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc/0x1 0xd/0x1000 0xd1000/0x1000 0xdc000/0x4000! 
0xe/0x1
cpu0 at mainbus0
cpu0: Enhanced SpeedStep 1700 MHz (1340 mV): speeds: 1700, 1400, 1200, 1000, 
800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82855PM Host rev 0x03
agp0 at pchb0: aperture at 0xd000, size 0x1000
ppb0 at pci0 dev 1 function 0 Intel 82855PM AGP rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 ATI Radeon Mobility M10 NP rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 Intel 82801DB USB rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 Intel 82801DB USB rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 Intel 82801DB USB rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 Intel 82801DB USB rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0x81
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 TI PCI4520 CardBus rev 0x01: irq 11
cbb1 at pci2 dev 0 function 1 TI PCI4520 CardBus rev 0x01: irq 11
em0 at pci2 dev 1 function 0 Intel PRO/1000MT (82540EP) rev 0x03: irq 11, 
address 00:11:25:2f:a3:76
ath0 at pci2 dev 2 function 0 Atheros AR5212 (IBM MiniPCI) rev 0x01: irq 11
ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR1W, address 00:05:4e:48:66:8c
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 Intel 82801DBM LPC rev 0x01: 24-bit timer 
at 3579545Hz
pciide0 at pci0 dev 31 function 1 Intel 82801DBM IDE rev 0x01: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: HTS726060M9AT00
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: HL-DT-ST, RW/DVD GCC-4242N, 0201 SCSI0 5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 Intel 82801DB SMBus rev 0x01: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 Intel 82801DB AC97 rev 0x01: irq 11, ICH4 
AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
Intel 82801DB Modem rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1
usb2 at