Re: Gnash, mplayer, Firefox losing its mind in current 28 Feb

2009-03-08 Thread Ed Ahlsen-Girard

On Sun, Mar 08 2009,  jake...@sdf.lonestar.org wrote:

On Sat, Mar 07, 2009 at 12:03:15PM -0600, Ed Ahlsen-Girard wrote: 
 Running current from a Feb 28 snapshot, I have found that if either  
 mplayer or gnash (from snapshots) are installed, and if embedded media  
 gain focus in FireFox, the mouse pointer will slide to the right 
edge of  
 the window and stay there until the system is restarted.  The pointer  
 can be moved up and down along the edge, but will not leave it, and  
 focus cannot be moved to another window.  Ctrl-arrow keys have no  
 effect.  A gnash core file of 8064892 bytes exists.  Dmesg below, core  
 on request. 


 what window manager are you using?

I am using fvwm.

 Ed Ahlsen-Girard 

 OpenBSD 4.4-current (GENERIC) #6: Fri Mar  6 22:42:12 CST 2009 
e...@puff.waynel.local:/usr/src/sys/arch/i386/compile/GENERIC 
 cpu0: Intel Pentium III (GenuineIntel 686-class, 512KB L2 cache) 
499 MHz 
 cpu0:  
 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE 
 real mem  = 335118336 (319MB) 
 avail mem = 315379712 (300MB) 
 mainbus0 at root 
 bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @ 
0xffe90,  
 SMBIOS rev. 2.2 @ 0xfb410 (64 entries) 
 bios0: vendor Dell Computer Corporation version A10 date 08/01/01 
 bios0: Dell Computer Corporation OptiPlex GX1 500Mbr+ 
 apm0 at bios0: Power Management spec V1.2 
 apm0: AC on, battery charge unknown 
 acpi at bios0 function 0x0 not configured 
 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 
 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/176 (9 entries) 
 pcibios0: PCI Interrupt Router at 000:07:0 (Intel 82371AB PIIX4 
ISA rev  
 0x00) 
 pcibios0: PCI bus #2 is the last bus 
 bios0: ROM list: 0xc/0xd000 0xd/0x8000 
 cpu0 at mainbus0: (uniprocessor) 
 pci0 at mainbus0 bus 0: configuration mode 1 (bios) 
 pchb0 at pci0 dev 0 function 0 Intel 82443BX AGP rev 0x03 
 intelagp0 at pchb0 
 agp0 at intelagp0: aperture at 0xf000, size 0x400 
 ppb0 at pci0 dev 1 function 0 Intel 82443BX AGP rev 0x03 
 pci1 at ppb0 bus 1 
 ATI Rage Pro rev 0x5c at pci1 dev 0 function 0 not configured 
 piixpcib0 at pci0 dev 7 function 0 Intel 82371AB PIIX4 ISA rev 0x02 
 pciide0 at pci0 dev 7 function 1 Intel 82371AB IDE rev 0x01: DMA, 
channel  
 0 wired to compatibility, channel 1 wired to compatibility 
 wd0 at pciide0 channel 0 drive 0: Maxtor 91024D4
 wd0: 16-sector PIO, LBA, 9765MB, 1728 sectors 
 wd1 at pciide0 channel 0 drive 1: WDC WD800JB-00JJC0
 wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors 
 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 
 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 
 atapiscsi0 at pciide0 channel 1 drive 0 
 scsibus0 at atapiscsi0: 2 targets, initiator 7 
 cd0 at scsibus0 targ 0 lun 0: HITACHI, CDR-8430, 0024 ATAPI 5/cdrom  
 removable 
 cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 
 uhci0 at pci0 dev 7 function 2 Intel 82371AB USB rev 0x01: irq 11 
 piixpm0 at pci0 dev 7 function 3 Intel 82371AB Power rev 0x02: SMBus  
 disabled 
 vga1 at pci0 dev 14 function 0 ATI Radeon 9200 SE Sec rev 0x01 
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) 
 wsdisplay0: screen 1-5 added (80x25, vt100 emulation) 
 radeondrm0 at vga1: irq 9 
 drm0 at radeondrm0 
 ppb1 at pci0 dev 15 function 0 DEC 21152 PCI-PCI rev 0x03 
 pci2 at ppb1 bus 2 
 ohci0 at pci2 dev 11 function 0 Acer Labs M5237 USB rev 0x03: irq 9,  
 version 1.0, legacy support 
 ehci0 at pci2 dev 11 function 3 Acer Labs M5239 USB2 rev 0x01: irq 10 
 usb0 at ehci0: USB revision 2.0 
 uhub0 at usb0 Acer Labs EHCI root hub rev 2.00/1.00 addr 1 
 usb1 at ohci0: USB revision 1.0 
 uhub1 at usb1 Acer Labs OHCI root hub rev 1.00/1.00 addr 1 
 xl0 at pci0 dev 17 function 0 3Com 3c905B 100Base-TX rev 0x24: irq 
11,  
 address 00:c0:4f:22:a7:b8 
 exphy0 at xl0 phy 24: 3Com internal media interface 
 isa0 at piixpcib0 
 isadma0 at isa0 
 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo 
 com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo 
 pckbc0 at isa0 port 0x60/5 
 pckbd0 at pckbc0 (kbd slot) 
 pckbc0: using irq 1 for kbd slot 
 wskbd0 at pckbd0: console keyboard, using wsdisplay0 
 pmsi0 at pckbc0 (aux slot) 
 pckbc0: using irq 12 for aux slot 
 wsmouse0 at pmsi0 mux 0 
 pcppi0 at isa0 port 0x61 
 midi0 at pcppi0: PC speaker
 spkr0 at pcppi0 
 lpt0 at isa0 port 0x378/4 irq 7 
 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 
 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 
 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec 
 isapnp0 at isa0 port 0x279: read port 0x203 
 wss1 at isapnp0 CS4236B, CSC, , WSS/SB port 
0x534/4,0x388/4,0x220/16  
 irq 5 drq 1,0: CS4236/CS4236B (vers 0) 
 audio0 at wss1 
 joy0 at isapnp0 CS4236B, CSC000F, , Game port 0x3a0/8 
 CS4236B, CSC0010, , Ctrl at isapnp0 port 0xf00/8 not configured 
 CS4236B, CSC0003, , MPU at isapnp0 port 0x330/2 not configured 
 usb2 at uhci0: USB revision 1.0 
 uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1 
 

Re: Gnash, mplayer, Firefox losing its mind in current 28 Feb

2009-03-07 Thread J.C. Roberts
On Sat, 07 Mar 2009 12:03:15 -0600 Ed Ahlsen-Girard eagir...@cox.net
wrote:

 Running current from a Feb 28 snapshot, I have found that if either 
 mplayer or gnash (from snapshots) are installed, and if embedded
 media gain focus in FireFox, the mouse pointer will slide to the
 right edge of the window and stay there until the system is
 restarted.  The pointer can be moved up and down along the edge, but
 will not leave it, and focus cannot be moved to another window.
 Ctrl-arrow keys have no effect.  A gnash core file of 8064892 bytes
 exists.  Dmesg below, core on request.
 
 Ed Ahlsen-Girard
 
 OpenBSD 4.4-current (GENERIC) #6: Fri Mar  6 22:42:12 CST 2009
 e...@puff.waynel.local:/usr/src/sys/arch/i386/compile/GENERIC


From the above you're running a self compiled 4.4-STABLE and not a
current snapshot.

Since the tree was tagged 4.5-current a few days ago, the most recent
snapshots will report OpenBSD 4.5-current Prior to this tag change,
they reported OpenBSD 4.5-beta

You did not mention what version of firefox you are running?

On 4.4, you've got firefox 2.X, but on 4.5 we have firefox 3.X.

I did notice a strange right side mouse pointer issue quite a while ago
(without any plugins) in firefox 2.X on OBSD 4.4, but I was never able
to repeat it... possibly because I created my own updated 2.X port.

If you are running 4.4-STABLE as your dmesg suggests, I have a
back-port/update of Firefox 2.0.0.20 that might just fix the issue.

-- 
J.C. Roberts



Re: Gnash, mplayer, Firefox losing its mind in current 28 Feb

2009-03-07 Thread Jacob Meuser
On Sat, Mar 07, 2009 at 12:03:15PM -0600, Ed Ahlsen-Girard wrote:
 Running current from a Feb 28 snapshot, I have found that if either 
 mplayer or gnash (from snapshots) are installed, and if embedded media 
 gain focus in FireFox, the mouse pointer will slide to the right edge of 
 the window and stay there until the system is restarted.  The pointer 
 can be moved up and down along the edge, but will not leave it, and 
 focus cannot be moved to another window.  Ctrl-arrow keys have no 
 effect.  A gnash core file of 8064892 bytes exists.  Dmesg below, core 
 on request.

what window manager are you using?

 Ed Ahlsen-Girard
 
 OpenBSD 4.4-current (GENERIC) #6: Fri Mar  6 22:42:12 CST 2009
e...@puff.waynel.local:/usr/src/sys/arch/i386/compile/GENERIC
 cpu0: Intel Pentium III (GenuineIntel 686-class, 512KB L2 cache) 499 MHz
 cpu0: 
 FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
 real mem  = 335118336 (319MB)
 avail mem = 315379712 (300MB)
 mainbus0 at root
 bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @ 0xffe90, 
 SMBIOS rev. 2.2 @ 0xfb410 (64 entries)
 bios0: vendor Dell Computer Corporation version A10 date 08/01/01
 bios0: Dell Computer Corporation OptiPlex GX1 500Mbr+
 apm0 at bios0: Power Management spec V1.2
 apm0: AC on, battery charge unknown
 acpi at bios0 function 0x0 not configured
 pcibios0 at bios0: rev 2.1 @ 0xf/0x1
 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/176 (9 entries)
 pcibios0: PCI Interrupt Router at 000:07:0 (Intel 82371AB PIIX4 ISA rev 
 0x00)
 pcibios0: PCI bus #2 is the last bus
 bios0: ROM list: 0xc/0xd000 0xd/0x8000
 cpu0 at mainbus0: (uniprocessor)
 pci0 at mainbus0 bus 0: configuration mode 1 (bios)
 pchb0 at pci0 dev 0 function 0 Intel 82443BX AGP rev 0x03
 intelagp0 at pchb0
 agp0 at intelagp0: aperture at 0xf000, size 0x400
 ppb0 at pci0 dev 1 function 0 Intel 82443BX AGP rev 0x03
 pci1 at ppb0 bus 1
 ATI Rage Pro rev 0x5c at pci1 dev 0 function 0 not configured
 piixpcib0 at pci0 dev 7 function 0 Intel 82371AB PIIX4 ISA rev 0x02
 pciide0 at pci0 dev 7 function 1 Intel 82371AB IDE rev 0x01: DMA, channel 
 0 wired to compatibility, channel 1 wired to compatibility
 wd0 at pciide0 channel 0 drive 0: Maxtor 91024D4
 wd0: 16-sector PIO, LBA, 9765MB, 1728 sectors
 wd1 at pciide0 channel 0 drive 1: WDC WD800JB-00JJC0
 wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
 atapiscsi0 at pciide0 channel 1 drive 0
 scsibus0 at atapiscsi0: 2 targets, initiator 7
 cd0 at scsibus0 targ 0 lun 0: HITACHI, CDR-8430, 0024 ATAPI 5/cdrom 
 removable
 cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
 uhci0 at pci0 dev 7 function 2 Intel 82371AB USB rev 0x01: irq 11
 piixpm0 at pci0 dev 7 function 3 Intel 82371AB Power rev 0x02: SMBus 
 disabled
 vga1 at pci0 dev 14 function 0 ATI Radeon 9200 SE Sec rev 0x01
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
 wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
 radeondrm0 at vga1: irq 9
 drm0 at radeondrm0
 ppb1 at pci0 dev 15 function 0 DEC 21152 PCI-PCI rev 0x03
 pci2 at ppb1 bus 2
 ohci0 at pci2 dev 11 function 0 Acer Labs M5237 USB rev 0x03: irq 9, 
 version 1.0, legacy support
 ehci0 at pci2 dev 11 function 3 Acer Labs M5239 USB2 rev 0x01: irq 10
 usb0 at ehci0: USB revision 2.0
 uhub0 at usb0 Acer Labs EHCI root hub rev 2.00/1.00 addr 1
 usb1 at ohci0: USB revision 1.0
 uhub1 at usb1 Acer Labs OHCI root hub rev 1.00/1.00 addr 1
 xl0 at pci0 dev 17 function 0 3Com 3c905B 100Base-TX rev 0x24: irq 11, 
 address 00:c0:4f:22:a7:b8
 exphy0 at xl0 phy 24: 3Com internal media interface
 isa0 at piixpcib0
 isadma0 at isa0
 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
 com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
 pckbc0 at isa0 port 0x60/5
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pmsi0 at pckbc0 (aux slot)
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pmsi0 mux 0
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker
 spkr0 at pcppi0
 lpt0 at isa0 port 0x378/4 irq 7
 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
 isapnp0 at isa0 port 0x279: read port 0x203
 wss1 at isapnp0 CS4236B, CSC, , WSS/SB port 0x534/4,0x388/4,0x220/16 
 irq 5 drq 1,0: CS4236/CS4236B (vers 0)
 audio0 at wss1
 joy0 at isapnp0 CS4236B, CSC000F, , Game port 0x3a0/8
 CS4236B, CSC0010, , Ctrl at isapnp0 port 0xf00/8 not configured
 CS4236B, CSC0003, , MPU at isapnp0 port 0x330/2 not configured
 usb2 at uhci0: USB revision 1.0
 uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1
 biomask ef45 netmask ef45 ttymask ffdf
 mtrr: Pentium Pro MTRR support
 ugen0 at uhub1 port 2 OMNIKEY AG Smart Card Reader USB rev 1.10/2.00 addr 
 2
 softraid0 at root
 root on wd1a 

Re: Gnash, mplayer, Firefox losing its mind in current 28 Feb

2009-03-07 Thread Jacob Meuser
On Sat, Mar 07, 2009 at 06:58:39PM +, Nigel J. Taylor wrote:
 I have found the mouse pointer being locked to the right edge as well, and 
 very
 annoying. I can normally recover, the I move the middle mouse button up/down 
 and
 press escape, that seems to release the mouse pointer for me, not much help if
 you have a two button mouse. I use an amd64 current build, and I found the 
 issue
 is not confined to firefox/gnash.

what window manager are you using?

 Regards
 
 Nigel Taylor
 
 Ed Ahlsen-Girard wrote:
  Running current from a Feb 28 snapshot, I have found that if either
  mplayer or gnash (from snapshots) are installed, and if embedded media
  gain focus in FireFox, the mouse pointer will slide to the right edge of
  the window and stay there until the system is restarted.  The pointer
  can be moved up and down along the edge, but will not leave it, and
  focus cannot be moved to another window.  Ctrl-arrow keys have no
  effect.  A gnash core file of 8064892 bytes exists.  Dmesg below, core
  on request.
  
  Ed Ahlsen-Girard
  
  OpenBSD 4.4-current (GENERIC) #6: Fri Mar  6 22:42:12 CST 2009
 e...@puff.waynel.local:/usr/src/sys/arch/i386/compile/GENERIC
  cpu0: Intel Pentium III (GenuineIntel 686-class, 512KB L2 cache) 499 MHz
  cpu0:
  FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
  
  real mem  = 335118336 (319MB)
  avail mem = 315379712 (300MB)
  mainbus0 at root
  bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @ 0xffe90,
  SMBIOS rev. 2.2 @ 0xfb410 (64 entries)
  bios0: vendor Dell Computer Corporation version A10 date 08/01/01
  bios0: Dell Computer Corporation OptiPlex GX1 500Mbr+
  apm0 at bios0: Power Management spec V1.2
  apm0: AC on, battery charge unknown
  acpi at bios0 function 0x0 not configured
  pcibios0 at bios0: rev 2.1 @ 0xf/0x1
  pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/176 (9 entries)
  pcibios0: PCI Interrupt Router at 000:07:0 (Intel 82371AB PIIX4 ISA
  rev 0x00)
  pcibios0: PCI bus #2 is the last bus
  bios0: ROM list: 0xc/0xd000 0xd/0x8000
  cpu0 at mainbus0: (uniprocessor)
  pci0 at mainbus0 bus 0: configuration mode 1 (bios)
  pchb0 at pci0 dev 0 function 0 Intel 82443BX AGP rev 0x03
  intelagp0 at pchb0
  agp0 at intelagp0: aperture at 0xf000, size 0x400
  ppb0 at pci0 dev 1 function 0 Intel 82443BX AGP rev 0x03
  pci1 at ppb0 bus 1
  ATI Rage Pro rev 0x5c at pci1 dev 0 function 0 not configured
  piixpcib0 at pci0 dev 7 function 0 Intel 82371AB PIIX4 ISA rev 0x02
  pciide0 at pci0 dev 7 function 1 Intel 82371AB IDE rev 0x01: DMA,
  channel 0 wired to compatibility, channel 1 wired to compatibility
  wd0 at pciide0 channel 0 drive 0: Maxtor 91024D4
  wd0: 16-sector PIO, LBA, 9765MB, 1728 sectors
  wd1 at pciide0 channel 0 drive 1: WDC WD800JB-00JJC0
  wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
  wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
  wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
  atapiscsi0 at pciide0 channel 1 drive 0
  scsibus0 at atapiscsi0: 2 targets, initiator 7
  cd0 at scsibus0 targ 0 lun 0: HITACHI, CDR-8430, 0024 ATAPI 5/cdrom
  removable
  cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
  uhci0 at pci0 dev 7 function 2 Intel 82371AB USB rev 0x01: irq 11
  piixpm0 at pci0 dev 7 function 3 Intel 82371AB Power rev 0x02: SMBus
  disabled
  vga1 at pci0 dev 14 function 0 ATI Radeon 9200 SE Sec rev 0x01
  wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
  wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
  radeondrm0 at vga1: irq 9
  drm0 at radeondrm0
  ppb1 at pci0 dev 15 function 0 DEC 21152 PCI-PCI rev 0x03
  pci2 at ppb1 bus 2
  ohci0 at pci2 dev 11 function 0 Acer Labs M5237 USB rev 0x03: irq 9,
  version 1.0, legacy support
  ehci0 at pci2 dev 11 function 3 Acer Labs M5239 USB2 rev 0x01: irq 10
  usb0 at ehci0: USB revision 2.0
  uhub0 at usb0 Acer Labs EHCI root hub rev 2.00/1.00 addr 1
  usb1 at ohci0: USB revision 1.0
  uhub1 at usb1 Acer Labs OHCI root hub rev 1.00/1.00 addr 1
  xl0 at pci0 dev 17 function 0 3Com 3c905B 100Base-TX rev 0x24: irq 11,
  address 00:c0:4f:22:a7:b8
  exphy0 at xl0 phy 24: 3Com internal media interface
  isa0 at piixpcib0
  isadma0 at isa0
  com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
  com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
  pckbc0 at isa0 port 0x60/5
  pckbd0 at pckbc0 (kbd slot)
  pckbc0: using irq 1 for kbd slot
  wskbd0 at pckbd0: console keyboard, using wsdisplay0
  pmsi0 at pckbc0 (aux slot)
  pckbc0: using irq 12 for aux slot
  wsmouse0 at pmsi0 mux 0
  pcppi0 at isa0 port 0x61
  midi0 at pcppi0: PC speaker
  spkr0 at pcppi0
  lpt0 at isa0 port 0x378/4 irq 7
  npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
  fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
  fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
  isapnp0 at isa0 port 0x279: read port 0x203
  wss1 at isapnp0 CS4236B, CSC, , WSS/SB port
  0x534/4,0x388/4,0x220/16 irq 5 drq 

Re: Gnash, mplayer, Firefox losing its mind in current 28 Feb

2009-03-07 Thread Nigel J. Taylor
Hi,

 On Sat, Mar 07, 2009 at 06:58:39PM +, Nigel J. Taylor wrote:
 I have found the mouse pointer being locked to the right edge as well, and 
 very
 annoying. I can normally recover, the I move the middle mouse button up/down 
 and
 press escape, that seems to release the mouse pointer for me, not much help 
 if
 you have a two button mouse. I use an amd64 current build, and I found the 
 issue
 is not confined to firefox/gnash.
 
 what window manager are you using?
Mainly kde, also run others, can't be sure, I think had the same happen with
some other window managers.

 
 Regards

 Nigel Taylor

 Ed Ahlsen-Girard wrote:
 Running current from a Feb 28 snapshot, I have found that if either
 mplayer or gnash (from snapshots) are installed, and if embedded media
 gain focus in FireFox, the mouse pointer will slide to the right edge of
 the window and stay there until the system is restarted.  The pointer
 can be moved up and down along the edge, but will not leave it, and
 focus cannot be moved to another window.  Ctrl-arrow keys have no
 effect.  A gnash core file of 8064892 bytes exists.  Dmesg below, core
 on request.

 Ed Ahlsen-Girard

 OpenBSD 4.4-current (GENERIC) #6: Fri Mar  6 22:42:12 CST 2009
e...@puff.waynel.local:/usr/src/sys/arch/i386/compile/GENERIC
 cpu0: Intel Pentium III (GenuineIntel 686-class, 512KB L2 cache) 499 MHz
 cpu0:
 FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE

 real mem  = 335118336 (319MB)
 avail mem = 315379712 (300MB)
 mainbus0 at root
 bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @ 0xffe90,
 SMBIOS rev. 2.2 @ 0xfb410 (64 entries)
 bios0: vendor Dell Computer Corporation version A10 date 08/01/01
 bios0: Dell Computer Corporation OptiPlex GX1 500Mbr+
 apm0 at bios0: Power Management spec V1.2
 apm0: AC on, battery charge unknown
 acpi at bios0 function 0x0 not configured
 pcibios0 at bios0: rev 2.1 @ 0xf/0x1
 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/176 (9 entries)
 pcibios0: PCI Interrupt Router at 000:07:0 (Intel 82371AB PIIX4 ISA
 rev 0x00)
 pcibios0: PCI bus #2 is the last bus
 bios0: ROM list: 0xc/0xd000 0xd/0x8000
 cpu0 at mainbus0: (uniprocessor)
 pci0 at mainbus0 bus 0: configuration mode 1 (bios)
 pchb0 at pci0 dev 0 function 0 Intel 82443BX AGP rev 0x03
 intelagp0 at pchb0
 agp0 at intelagp0: aperture at 0xf000, size 0x400
 ppb0 at pci0 dev 1 function 0 Intel 82443BX AGP rev 0x03
 pci1 at ppb0 bus 1
 ATI Rage Pro rev 0x5c at pci1 dev 0 function 0 not configured
 piixpcib0 at pci0 dev 7 function 0 Intel 82371AB PIIX4 ISA rev 0x02
 pciide0 at pci0 dev 7 function 1 Intel 82371AB IDE rev 0x01: DMA,
 channel 0 wired to compatibility, channel 1 wired to compatibility
 wd0 at pciide0 channel 0 drive 0: Maxtor 91024D4
 wd0: 16-sector PIO, LBA, 9765MB, 1728 sectors
 wd1 at pciide0 channel 0 drive 1: WDC WD800JB-00JJC0
 wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
 atapiscsi0 at pciide0 channel 1 drive 0
 scsibus0 at atapiscsi0: 2 targets, initiator 7
 cd0 at scsibus0 targ 0 lun 0: HITACHI, CDR-8430, 0024 ATAPI 5/cdrom
 removable
 cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
 uhci0 at pci0 dev 7 function 2 Intel 82371AB USB rev 0x01: irq 11
 piixpm0 at pci0 dev 7 function 3 Intel 82371AB Power rev 0x02: SMBus
 disabled
 vga1 at pci0 dev 14 function 0 ATI Radeon 9200 SE Sec rev 0x01
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
 wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
 radeondrm0 at vga1: irq 9
 drm0 at radeondrm0
 ppb1 at pci0 dev 15 function 0 DEC 21152 PCI-PCI rev 0x03
 pci2 at ppb1 bus 2
 ohci0 at pci2 dev 11 function 0 Acer Labs M5237 USB rev 0x03: irq 9,
 version 1.0, legacy support
 ehci0 at pci2 dev 11 function 3 Acer Labs M5239 USB2 rev 0x01: irq 10
 usb0 at ehci0: USB revision 2.0
 uhub0 at usb0 Acer Labs EHCI root hub rev 2.00/1.00 addr 1
 usb1 at ohci0: USB revision 1.0
 uhub1 at usb1 Acer Labs OHCI root hub rev 1.00/1.00 addr 1
 xl0 at pci0 dev 17 function 0 3Com 3c905B 100Base-TX rev 0x24: irq 11,
 address 00:c0:4f:22:a7:b8
 exphy0 at xl0 phy 24: 3Com internal media interface
 isa0 at piixpcib0
 isadma0 at isa0
 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
 com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
 pckbc0 at isa0 port 0x60/5
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pmsi0 at pckbc0 (aux slot)
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pmsi0 mux 0
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker
 spkr0 at pcppi0
 lpt0 at isa0 port 0x378/4 irq 7
 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
 isapnp0 at isa0 port 0x279: read port 0x203
 wss1 at isapnp0 CS4236B, CSC, , WSS/SB port
 

Re: Gnash, mplayer, Firefox losing its mind in current 28 Feb

2009-03-07 Thread ropers
2009/3/8 Nigel J. Taylor njtay...@asterisk.demon.co.uk:

 what window manager are you using?
 Mainly kde, also run others, can't be sure, I think had the same happen with
 some other window managers.

You mean KWin? http://en.wikipedia.org/wiki/KWin