Re: OpenBSD 4.8 HP ProLiant DL360 G7 Install OK?
On Wed, Mar 09, 2011 at 08:03:25AM +0100, rancor wrote: We are running stock OpenBSD 4.8 on several DL360 G6 and G7 and a additional HP NC364T PCI Express Quad Port Gigabit Server Adapter. We are running them in pairs as a firewall cluster with pfsync and carp and also as stand alone as a router but we have problem with random freezes. We have tried both AMD64 and i386, all patched up to latest errata but we can't make them work stable. Now are we using VMware ESXi as a layer between the hardware and OpenBSD and every thing works just perfect, not a single freeze since we did this .. work around Our bug report on this matter: http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yesnumbers=6321 That bug report is not very useful to a developer and way too old. Get a serial cable and run the latest snapshot (without disabling any devices). Capture dmesg and panic, type trace, ps - show registers may also be helpful. No screenshots. If you want help, YOU need to provide this information OR ship the hw to someone who wants to look into it. Whining on misc@ is certainly not going to fix anything. Since we don't know how to resolve this our future with OpenBSD is most unsure, we have more then 50 installations on different platforms and it's only G6 och G7 that are causing any problem. It's hard to say if it's only us since I never hear anything about this issue but we sure feels alone. Regards 2011/3/9 llj7 sg...@ktis.kr: I am looking to purchase the server for OpenBSD 4.8 OpenBSD 4.8 HP ProLiant DL360 G7 Install OK? Or another Recent HP Server ? Help me PLZ
Re: OpenBSD 4.8 HP ProLiant DL360 G7 Install OK?
I have been asking for how I can provide more information but the question was not answered. Im not whining, Im just providing my experience. I would be happy to provide more information if some body asked my in my report and also told me what to do because I don't know and If I did I had provided that information in the first place. If you got better experience with DL360 G7 (and G6) please tell us how your setup was so that this user can install without any problem and I can resolve my issues. In other case please shut up with your lame attitude and start to help instead of beeing an arsehole. Regards Den 9 mar 2011 11.21 skrev Tobias Ulmer tobi...@tmux.org: On Wed, Mar 09, 2011 at 08:03:25AM +0100, rancor wrote: We are running stock OpenBSD 4.8 on several DL360 G6 and G7 and a additional HP NC364T PCI Express Quad Port Gigabit Server Adapter. We are running them in pairs as a firewall cluster with pfsync and carp and also as stand alone as a router but we have problem with random freezes. We have tried both AMD64 and i386, all patched up to latest errata but we can't make them work stable. Now are we using VMware ESXi as a layer between the hardware and OpenBSD and every thing works just perfect, not a single freeze since we did this .. work around Our bug report on this matter: http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yesnumbers=6321 That bug report is not very useful to a developer and way too old. Get a serial cable and run the latest snapshot (without disabling any devices). Capture dmesg and panic, type trace, ps - show registers may also be helpful. No screenshots. If you want help, YOU need to provide this information OR ship the hw to someone who wants to look into it. Whining on misc@ is certainly not going to fix anything. Since we don't know how to resolve this our future with OpenBSD is most unsure, we have more then 50 installations on different platforms and it's only G6 och G7 that are causing any problem. It's hard to say if it's only us since I never hear anything about this issue but we sure feels alone. Regards 2011/3/9 l l j7 sg...@ktis.kr: I am looking to purchase the server for OpenBSD 4.8 OpenBSD 4.8 HP ProLiant DL360 G7 Install OK? Or another Recent HP Server ? Help me PLZ
Re: OpenBSD 4.8 HP ProLiant DL360 G7 Install OK?
On Wed, Mar 09, 2011 at 11:39:16AM +0100, rancor wrote: I have been asking for how I can provide more information but the question was not answered. Im not whining, Im just providing my experience. I would be happy to provide more information if some body asked my in my report and also told me what to do because I don't know and If I did I had provided that information in the first place. If you got better experience with DL360 G7 (and G6) please tell us how your setup was so that this user can install without any problem and I can resolve my issues. In other case please shut up with your lame attitude and start to help instead of beeing an arsehole. Awww, how about you take a cold shower and read the mail again. The first paragraph has all the steps to write a more detailed bug report. Regards Den 9 mar 2011 11.21 skrev Tobias Ulmer tobi...@tmux.org: On Wed, Mar 09, 2011 at 08:03:25AM +0100, rancor wrote: We are running stock OpenBSD 4.8 on several DL360 G6 and G7 and a additional HP NC364T PCI Express Quad Port Gigabit Server Adapter. We are running them in pairs as a firewall cluster with pfsync and carp and also as stand alone as a router but we have problem with random freezes. We have tried both AMD64 and i386, all patched up to latest errata but we can't make them work stable. Now are we using VMware ESXi as a layer between the hardware and OpenBSD and every thing works just perfect, not a single freeze since we did this .. work around Our bug report on this matter: http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yesnumbers=6321 That bug report is not very useful to a developer and way too old. Get a serial cable and run the latest snapshot (without disabling any devices). Capture dmesg and panic, type trace, ps - show registers may also be helpful. No screenshots. If you want help, YOU need to provide this information OR ship the hw to someone who wants to look into it. Whining on misc@ is certainly not going to fix anything. Since we don't know how to resolve this our future with OpenBSD is most unsure, we have more then 50 installations on different platforms and it's only G6 och G7 that are causing any problem. It's hard to say if it's only us since I never hear anything about this issue but we sure feels alone. Regards 2011/3/9 l l j7 sg...@ktis.kr: I am looking to purchase the server for OpenBSD 4.8 OpenBSD 4.8 HP ProLiant DL360 G7 Install OK? Or another Recent HP Server ? Help me PLZ
Re: OpenBSD 4.8 HP ProLiant DL360 G7 Install OK?
From an HP DL360 G6... OpenBSD 4.7 (GENERIC.MP) #1: Fri Feb 11 22:42:45 UTC 2011 r...@example.com:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (GenuineIntel 686-class) 2.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR real mem = 3747373056 (3573MB) avail mem = 3647221760 (3478MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf, SMBIOS rev. 2.6 @ 0xdf7fe000 (127 entries) bios0: vendor HP version P64 date 03/30/2010 bios0: HP ProLiant DL360 G6 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SPCR MCFG HPET SPMI ERST APIC SRAT BERT HEST DMAR SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: unknown i686 model 0x1a, can't get bus clock (0x0) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 4 (application processor) cpu1: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (GenuineIntel 686-class) 2.01 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (GenuineIntel 686-class) 2.01 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR cpu3 at mainbus0: apid 6 (application processor) cpu3: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (GenuineIntel 686-class) 2.01 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins ioapic1 at mainbus0: apid 0 pa 0xfec8, version 20, 24 pins acpiprt0 at acpi0: bus 1 (IP2P) acpiprt1 at acpi0: bus -1 (IPT1) acpiprt2 at acpi0: bus 3 (PT01) acpiprt3 at acpi0: bus 10 (PT02) acpiprt4 at acpi0: bus 7 (PT03) acpiprt5 at acpi0: bus 11 (PT04) acpiprt6 at acpi0: bus 12 (PT05) acpiprt7 at acpi0: bus 13 (PT06) acpiprt8 at acpi0: bus 14 (PT07) acpiprt9 at acpi0: bus 2 (PT08) acpiprt10 at acpi0: bus 4 (PT09) acpiprt11 at acpi0: bus 15 (PT0A) acpiprt12 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C3, C3, C1 acpicpu1 at acpi0: C3, C3, C1 acpicpu2 at acpi0: C3, C3, C1 acpicpu3 at acpi0: C3, C3, C1 acpitz0 at acpi0: critical temperature 31 degC bios0: ROM list: 0xc/0xb000 0xcb000/0x3600! 0xce600/0x2c00! 0xd1200/0x4000 ipmi at mainbus0 not configured cpu0: EST: PSS not yet available for this processor pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 5520 Host rev 0x13 ppb0 at pci0 dev 1 function 0 Intel X58 PCIE rev 0x13 pci1 at ppb0 bus 3 ciss0 at pci1 dev 0 function 0 Hewlett-Packard Smart Array rev 0x01: apic 0 int 4 (irq 7) ciss0: 1 LD, HW rev 2, FW 3.00/3.00, 64bit fifo rro scsibus0 at ciss0: 1 targets sd0 at scsibus0 targ 0 lun 0: HP, LOGICAL VOLUME, 3.00 SCSI3 0/direct fixed sd0: 69973MB, 512 bytes/sec, 143305920 sec total ppb1 at pci0 dev 2 function 0 Intel X58 PCIE rev 0x13 pci2 at ppb1 bus 10 ppb2 at pci0 dev 3 function 0 Intel X58 PCIE rev 0x13 pci3 at ppb2 bus 7 em0 at pci3 dev 0 function 0 Intel PRO/1000 PT (82571EB) rev 0x06: apic 0 int 0 (irq 7), address 00:15:17:ff:ff:ff em1 at pci3 dev 0 function 1 Intel PRO/1000 PT (82571EB) rev 0x06: apic 0 int 10 (irq 11), address 00:15:17:ff:ff:ff ppb3 at pci0 dev 4 function 0 Intel X58 PCIE rev 0x13 pci4 at ppb3 bus 11 ppb4 at pci0 dev 5 function 0 Intel X58 PCIE rev 0x13 pci5 at ppb4 bus 12 ppb5 at pci0 dev 6 function 0 Intel X58 PCIE rev 0x13 pci6 at ppb5 bus 13 ppb6 at pci0 dev 7 function 0 Intel X58 PCIE rev 0x13 pci7 at ppb6 bus 14 ppb7 at pci0 dev 8 function 0 Intel X58 PCIE rev 0x13 pci8 at ppb7 bus 2 bnx0 at pci8 dev 0 function 0 Broadcom BCM5709 rev 0x20: apic 0 int 7 (irq 7) bnx1 at pci8 dev 0 function 1 Broadcom BCM5709 rev 0x20: apic 0 int 15 (irq 11) ppb8 at pci0 dev 9 function 0 Intel X58 PCIE rev 0x13 pci9 at ppb8 bus 4 ppb9 at pci0 dev 10 function 0 Intel X58 PCIE rev 0x13 pci10 at ppb9 bus 15 pchb1 at pci0 dev 13 function 0 vendor Intel, unknown product 0x343a rev 0x13 pchb2 at pci0 dev 13 function 1 vendor Intel, unknown product 0x343b rev 0x13 pchb3 at pci0 dev 13 function 2 vendor Intel, unknown product 0x343c rev 0x13 pchb4 at pci0 dev 13 function 3 vendor Intel, unknown product 0x343d rev 0x13 pchb5 at pci0 dev 13 function 4 Intel 5520/X58 QuickPath rev 0x13 pchb6 at pci0 dev 13 function 5 Intel 5520 QuickPath rev 0x13 pchb7 at pci0 dev 13 function 6 vendor Intel, unknown product 0x341a rev 0x13 pchb8 at pci0 dev 14 function 0 vendor Intel, unknown product 0x341c rev 0x13 pchb9 at pci0 dev 14 function 1
Re: OpenBSD 4.8 HP ProLiant DL360 G7 Install OK?
No, sadly not. The machines are now in use and I don't have any to spare. I needed that information when I reported the problem, it's kind of late now but I sure will use the information next time I run into problem when I'm validating a new environment. Best Regards 2011/3/9 Tobias Ulmer tobi...@tmux.org: On Wed, Mar 09, 2011 at 11:39:16AM +0100, rancor wrote: I have been asking for how I can provide more information but the question was not answered. Im not whining, Im just providing my experience. I would be happy to provide more information if some body asked my in my report and also told me what to do because I don't know and If I did I had provided that information in the first place. If you got better experience with DL360 G7 (and G6) please tell us how your setup was so that this user can install without any problem and I can resolve my issues. In other case please shut up with your lame attitude and start to help instead of beeing an arsehole. Awww, how about you take a cold shower and read the mail again. The first paragraph has all the steps to write a more detailed bug report. Regards Den 9 mar 2011 11.21 skrev Tobias Ulmer tobi...@tmux.org: On Wed, Mar 09, 2011 at 08:03:25AM +0100, rancor wrote: We are running stock OpenBSD 4.8 on several DL360 G6 and G7 and a additional HP NC364T PCI Express Quad Port Gigabit Server Adapter. We are running them in pairs as a firewall cluster with pfsync and carp and also as stand alone as a router but we have problem with random freezes. We have tried both AMD64 and i386, all patched up to latest errata but we can't make them work stable. Now are we using VMware ESXi as a layer between the hardware and OpenBSD and every thing works just perfect, not a single freeze since we did this .. work around Our bug report on this matter: http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yesnumbers=6321 That bug report is not very useful to a developer and way too old. Get a serial cable and run the latest snapshot (without disabling any devices). Capture dmesg and panic, type trace, ps - show registers may also be helpful. No screenshots. If you want help, YOU need to provide this information OR ship the hw to someone who wants to look into it. Whining on misc@ is certainly not going to fix anything. Since we don't know how to resolve this our future with OpenBSD is most unsure, we have more then 50 installations on different platforms and it's only G6 och G7 that are causing any problem. It's hard to say if it's only us since I never hear anything about this issue but we sure feels alone. Regards 2011/3/9 l l j7 sg...@ktis.kr: I am looking to purchase the server for OpenBSD 4.8 OpenBSD 4.8 HP ProLiant DL360 G7 Install OK? Or another Recent HP Server ? Help me PLZ
Re: OpenBSD 4.8 HP ProLiant DL360 G7 Install OK?
On Wed, Mar 09, 2011 at 11:39:16AM +0100, rancor wrote: I have been asking for how I can provide more information but the question was not answered. Im not whining, Im just providing my experience. I would be happy to provide more information if some body asked my in my report and also told me what to do because I don't know and If I did I had provided that information in the first place. If you got better experience with DL360 G7 (and G6) please tell us how your setup was so that this user can install without any problem and I can resolve my issues. In other case please shut up with your lame attitude and start to help instead of beeing an arsehole. The requirements for a useful bug report are also laid out at http://openbsd.org/report.html Of particular interest in point 5 of How to Create a Bug Report is Panic reports without panic message, traceback and ps output are useless. And if one follows the link in the PR, this is indeed a panic report, not a system hang. With no trace of the crash or even mentioning the panic message, the report does not provide anything we can work on. The panic message is visible via the link you posted but would be more likely to be read if included in the report. All that said, many many bugs in pfsync/carp in particular are fixed in 4.9, and reproducing the problem on 4.9-current would be extremely useful. A 4.6 report with no useful information is likely to be closed soon. Ken
Re: OpenBSD 4.8 HP ProLiant DL360 G7 Install OK?
On Wed, Mar 09, 2011 at 01:08:07PM +0100, rancor wrote: No, sadly not. The machines are now in use and I don't have any to spare. I needed that information when I reported the problem, it's kind of late now but I sure will use the information next time I run into problem when I'm validating a new environment. Best Regards OK, I'll close the PR and you can submit a new one when you have time/hardware to test. Thanks. Ken
Re: OpenBSD 4.8 HP ProLiant DL360 G7 Install OK?
We are running stock OpenBSD 4.8 on several DL360 G6 and G7 and a additional HP NC364T PCI Express Quad Port Gigabit Server Adapter. We are running them in pairs as a firewall cluster with pfsync and carp and also as stand alone as a router but we have problem with random freezes. We have tried both AMD64 and i386, all patched up to latest errata but we can't make them work stable. Now are we using VMware ESXi as a layer between the hardware and OpenBSD and every thing works just perfect, not a single freeze since we did this .. work around Our bug report on this matter: http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yesnumbers=6321 Since we don't know how to resolve this our future with OpenBSD is most unsure, we have more then 50 installations on different platforms and it's only G6 och G7 that are causing any problem. It's hard to say if it's only us since I never hear anything about this issue but we sure feels alone. Regards 2011/3/9 llj7 sg...@ktis.kr: I am looking to purchase the server for OpenBSD 4.8 OpenBSD 4.8 HP ProLiant DL360 G7 Install OK? Or another Recent HP Server ? Help me PLZ
