Re: not known intel ethernet card
Hi Could you to apply the attached diff on a clean tree and send me full dmesg output? it seems there are 2 problems to be fixed: 1. link detection does not work well on th original box i developped the support for. 2. the first phy on your hardware seems to behave wierdly, and i need to find out why. greets On Sat, 18 Apr 2015, Holger Glaess wrote: hi dont worry , i'm happy that you care about this problem so fast. holger Am 17.04.2015 um 22:18 schrieb Dariusz Swiderski: Hi, was not quite expecting that, new diff is being cooked up, but expect it later this night greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 17 kwi 2015, at 18:45, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi Am 17.04.2015 um 13:28 schrieb Dariusz Swiderski: hi is this only on em1? yes just em1 and can you try plugging each of this port to a switch and see in ifconfig if media gets negotiated? i did and no negoation , ifconfig says no link because the link led is on. if i do an ifconfig em3 up em3: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:14:b7:00:61:66 priority: 0 media: Ethernet autoselect (1000baseT full-duplex) status: active if i pull the cable same result like ahead. holger greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 17 kwi 2015, at 13:21, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi looks good , but this unable to read is coming from not connected port ? Holger # dmesg | grep ^em em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 16, address 00:14:b7:00:61:64 em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 17, address 00:14:b7:00:61:65 em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 18, address 00:14:b7:00:61:66 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 hi please apply attached patch on top of the previous one, build and reboot :) greets dms On Fri, 17 Apr 2015, Holger Glaess wrote: hi after build and boot the a patched kernel i see now the em interface but he show an eeprom error. see demsg Holger OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 root@DAF.rocki.intern mailto:root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042157568 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus
Re: not known intel ethernet card
hi so restart with a blank paper ;) i did an rm -r /usr/src then cd /usr cvs -qd anon...@ftp5.eu.openbsd.org:/cvs get -P src cd /usr/src/sys/dev patch -p1 /home/glaess/EP80579_debug.diff then i got some reject i modify all rejected files by hand ( with the missing lines ) cd /usr/src/sys/arch/i386/conf config GENERIC cd ../compile/GENERIC make depend make then i copy the new bsd kernel files to the EP80579 Hardware by scp and restart them. holger # dmesg OpenBSD 5.7-current (GENERIC) #0: Mon Apr 20 21:16:06 CEST 2015 root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042243584 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) em_probe: begin pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 em_probe: begin Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured em_probe: begin Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured em_probe: begin ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em_probe: begin em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00em_attach: begin : msiem_hardware_init: begin em_check_phy_reset_block em_setup_linkem_check_phy_reset_block em_detect_gig_phyPhy ID = 1410cb0 em_setup_copper_linkem_copper_link_mgp_setupem_check_phy_reset_block em_setup_interface: begin will ifmedia_init did ifmedia_init before if_attach before ether_ifattach , address 00:14:b7:00:61:63 em_check_phy_reset_block em_attach: end em_probe: begin ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 em_probe: begin ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 em_probe: begin em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01em_attach: begin EP80579 ith dev_id 0: apic 2 int 16em_hardware_init: begin em_check_phy_reset_block em_setup_linkem_check_phy_reset_block em_detect_gig_phy Hardware Initialization Deferred , address 00:14:b7:00:61:64 em_check_phy_reset_block em_attach: end em_probe: begin em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01em_attach: begin EP80579 ith dev_id 1: apic 2 int 17em_hardware_init: begin em_check_phy_reset_block em_setup_linkem_check_phy_reset_block em_detect_gig_phy Hardware Initialization Deferred , address 00:14:b7:00:61:65 em_check_phy_reset_block em_attach: end em_probe: begin em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01em_attach: begin EP80579 ith dev_id 2: apic 2 int 18em_hardware_init: begin em_check_phy_reset_block em_setup_linkem_check_phy_reset_block em_detect_gig_phy Hardware Initialization Deferred , address 00:14:b7:00:61:66 em_check_phy_reset_block em_attach: end em_probe: begin gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 em_probe: begin Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured em_probe: begin Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured em_probe: begin Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured em_probe: begin Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured em_probe: begin Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured em_probe: begin vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured em_probe: begin Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not
Re: not known intel ethernet card
hi dont worry , i'm happy that you care about this problem so fast. holger Am 17.04.2015 um 22:18 schrieb Dariusz Swiderski: Hi, was not quite expecting that, new diff is being cooked up, but expect it later this night greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 17 kwi 2015, at 18:45, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi Am 17.04.2015 um 13:28 schrieb Dariusz Swiderski: hi is this only on em1? yes just em1 and can you try plugging each of this port to a switch and see in ifconfig if media gets negotiated? i did and no negoation , ifconfig says no link because the link led is on. if i do an ifconfig em3 up em3: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:14:b7:00:61:66 priority: 0 media: Ethernet autoselect (1000baseT full-duplex) status: active if i pull the cable same result like ahead. holger greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 17 kwi 2015, at 13:21, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi looks good , but this unable to read is coming from not connected port ? Holger # dmesg | grep ^em em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 16, address 00:14:b7:00:61:64 em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 17, address 00:14:b7:00:61:65 em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 18, address 00:14:b7:00:61:66 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 hi please apply attached patch on top of the previous one, build and reboot :) greets dms On Fri, 17 Apr 2015, Holger Glaess wrote: hi after build and boot the a patched kernel i see now the em interface but he show an eeprom error. see demsg Holger OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 root@DAF.rocki.intern mailto:root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042157568 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address
Re: not known intel ethernet card
hi after build and boot the a patched kernel i see now the em interface but he show an eeprom error. see demsg Holger OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042157568 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01em1: Unknown MAC Type : apic 2 int 16em1: The EEPROM Checksum Is Not Valid em1: Unable to initialize the hardware em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01em2: Unknown MAC Type : apic 2 int 17em2: The EEPROM Checksum Is Not Valid em2: Unable to initialize the hardware em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01em3: Unknown MAC Type : apic 2 int 18em3: The EEPROM Checksum Is Not Valid em3: Unable to initialize the hardware gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel EP80579 LPC rev 0x01 ahci0 at pci0 dev 31 function 2 Intel EP80579 AHCI rev 0x01: msi, AHCI 1.1 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: ATA, TOSHIBA MK6037GS, DL34 SCSI3 0/direct fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT sd0: 57231MB, 512 bytes/sector, 117210240 sectors ichiic0 at pci0 dev 31 function 3 Intel EP80579 SMBus rev 0x01: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 vscsi0 at root
Re: not known intel ethernet card
Hi, this is good, will supply a new patch in about an hour greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 17 kwi 2015, at 09:15, Holger Glaess gla...@glaessixs.de wrote: hi after build and boot the a patched kernel i see now the em interface but he show an eeprom error. see demsg Holger OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 root@DAF.rocki.intern mailto:root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042157568 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01em1: Unknown MAC Type : apic 2 int 16em1: The EEPROM Checksum Is Not Valid em1: Unable to initialize the hardware em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01em2: Unknown MAC Type : apic 2 int 17em2: The EEPROM Checksum Is Not Valid em2: Unable to initialize the hardware em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01em3: Unknown MAC Type : apic 2 int 18em3: The EEPROM Checksum Is Not Valid em3: Unable to initialize the hardware gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel EP80579 LPC rev 0x01 ahci0 at pci0 dev 31 function 2 Intel EP80579 AHCI rev 0x01: msi, AHCI 1.1 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: ATA, TOSHIBA MK6037GS, DL34 SCSI3 0/direct fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT sd0: 57231MB, 512 bytes/sector, 117210240 sectors ichiic0 at pci0 dev 31 function 3 Intel EP80579 SMBus rev 0x01: apic 2 int 19 iic0 at ichiic0
Re: not known intel ethernet card
hi please apply attached patch on top of the previous one, build and reboot :) greets dms On Fri, 17 Apr 2015, Holger Glaess wrote: hi after build and boot the a patched kernel i see now the em interface but he show an eeprom error. see demsg Holger OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042157568 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01em1: Unknown MAC Type : apic 2 int 16em1: The EEPROM Checksum Is Not Valid em1: Unable to initialize the hardware em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01em2: Unknown MAC Type : apic 2 int 17em2: The EEPROM Checksum Is Not Valid em2: Unable to initialize the hardware em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01em3: Unknown MAC Type : apic 2 int 18em3: The EEPROM Checksum Is Not Valid em3: Unable to initialize the hardware gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel EP80579 LPC rev 0x01 ahci0 at pci0 dev 31 function 2 Intel EP80579 AHCI rev 0x01: msi, AHCI 1.1 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: ATA, TOSHIBA MK6037GS, DL34 SCSI3 0/direct fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT sd0: 57231MB, 512 bytes/sector, 117210240 sectors ichiic0 at pci0 dev 31 function 3 Intel EP80579 SMBus rev 0x01: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at
Re: not known intel ethernet card
hi is this only on em1? and can you try plugging each of this port to a switch and see in ifconfig if media gets negotiated? greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 17 kwi 2015, at 13:21, Holger Glaess gla...@glaessixs.de wrote: hi looks good , but this unable to read is coming from not connected port ? Holger # dmesg | grep ^em em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 16, address 00:14:b7:00:61:64 em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 17, address 00:14:b7:00:61:65 em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 18, address 00:14:b7:00:61:66 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 hi please apply attached patch on top of the previous one, build and reboot :) greets dms On Fri, 17 Apr 2015, Holger Glaess wrote: hi after build and boot the a patched kernel i see now the em interface but he show an eeprom error. see demsg Holger OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042157568 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01em1: Unknown MAC Type : apic 2 int 16em1: The EEPROM Checksum Is Not Valid em1: Unable to initialize the hardware em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01em2: Unknown MAC Type : apic 2 int 17em2: The EEPROM Checksum Is Not Valid em2: Unable to initialize the hardware em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01em3: Unknown MAC Type : apic 2 int 18em3: The EEPROM Checksum Is Not Valid em3: Unable to initialize the hardware gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass
Re: not known intel ethernet card
hi looks good , but this unable to read is coming from not connected port ? Holger # dmesg | grep ^em em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 16, address 00:14:b7:00:61:64 em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 17, address 00:14:b7:00:61:65 em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 18, address 00:14:b7:00:61:66 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 hi please apply attached patch on top of the previous one, build and reboot :) greets dms On Fri, 17 Apr 2015, Holger Glaess wrote: hi after build and boot the a patched kernel i see now the em interface but he show an eeprom error. see demsg Holger OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042157568 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01em1: Unknown MAC Type : apic 2 int 16em1: The EEPROM Checksum Is Not Valid em1: Unable to initialize the hardware em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01em2: Unknown MAC Type : apic 2 int 17em2: The EEPROM Checksum Is Not Valid em2: Unable to initialize the hardware em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01em3: Unknown MAC Type : apic 2 int 18em3: The EEPROM Checksum Is Not Valid em3: Unable to initialize the hardware gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision
Re: not known intel ethernet card
hi Am 17.04.2015 um 13:28 schrieb Dariusz Swiderski: hi is this only on em1? yes just em1 and can you try plugging each of this port to a switch and see in ifconfig if media gets negotiated? i did and no negoation , ifconfig says no link because the link led is on. if i do an ifconfig em3 up em3: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:14:b7:00:61:66 priority: 0 media: Ethernet autoselect (1000baseT full-duplex) status: active if i pull the cable same result like ahead. holger greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 17 kwi 2015, at 13:21, Holger Glaess gla...@glaessixs.de wrote: hi looks good , but this unable to read is coming from not connected port ? Holger # dmesg | grep ^em em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 16, address 00:14:b7:00:61:64 em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 17, address 00:14:b7:00:61:65 em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 18, address 00:14:b7:00:61:66 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 hi please apply attached patch on top of the previous one, build and reboot :) greets dms On Fri, 17 Apr 2015, Holger Glaess wrote: hi after build and boot the a patched kernel i see now the em interface but he show an eeprom error. see demsg Holger OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042157568 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01em1: Unknown MAC Type : apic 2 int 16em1: The EEPROM Checksum Is Not Valid em1: Unable to initialize the hardware em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01em2: Unknown MAC Type : apic 2 int 17em2: The EEPROM Checksum Is Not Valid em2: Unable to initialize the hardware em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01em3: Unknown MAC Type : apic 2 int 18em3: The EEPROM Checksum Is Not Valid em3: Unable to initialize the hardware gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579
Re: not known intel ethernet card
Hi, was not quite expecting that, new diff is being cooked up, but expect it later this night greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 17 kwi 2015, at 18:45, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi Am 17.04.2015 um 13:28 schrieb Dariusz Swiderski: hi is this only on em1? yes just em1 and can you try plugging each of this port to a switch and see in ifconfig if media gets negotiated? i did and no negoation , ifconfig says no link because the link led is on. if i do an ifconfig em3 up em3: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:14:b7:00:61:66 priority: 0 media: Ethernet autoselect (1000baseT full-duplex) status: active if i pull the cable same result like ahead. holger greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 17 kwi 2015, at 13:21, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi looks good , but this unable to read is coming from not connected port ? Holger # dmesg | grep ^em em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 16, address 00:14:b7:00:61:64 em2 at pci3 dev 1 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 17, address 00:14:b7:00:61:65 em3 at pci3 dev 2 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 18, address 00:14:b7:00:61:66 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 2 em1: unable to read phy 0 reg 3 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 em1: unable to read phy 0 reg 1 hi please apply attached patch on top of the previous one, build and reboot :) greets dms On Fri, 17 Apr 2015, Holger Glaess wrote: hi after build and boot the a patched kernel i see now the em interface but he show an eeprom error. see demsg Holger OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 root@DAF.rocki.intern mailto:root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042157568 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3
Re: not known intel ethernet card
Hi, Could you provide output of pcidump -v Sent from my iPhone On 16 kwi 2015, at 18:59, Holger Glaess gla...@glaessixs.de wrote: hi can help someone ? the 3 other intel ethernet card are also gigabit . holger # dmesg OpenBSD 5.7-current (GENERIC) #759: Wed Apr 1 14:25:18 MDT 2015 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042243584 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 vendor Intel, unknown product 0x5041 (class network subclass ethernet, rev 0x01) at pci3 dev 0 function 0 not configured vendor Intel, unknown product 0x5045 (class network subclass ethernet, rev 0x01) at pci3 dev 1 function 0 not configured vendor Intel, unknown product 0x5049 (class network subclass ethernet, rev 0x01) at pci3 dev 2 function 0 not configured gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel EP80579 LPC rev 0x01 ahci0 at pci0 dev 31 function 2 Intel EP80579 AHCI rev 0x01: msi, AHCI 1.1 ahci0: port 0: 3.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: ATA, TOSHIBA MK6037GS, DL34 SCSI3 0/direct fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT sd0: 57231MB, 512 bytes/sector, 117210240 sectors ichiic0 at pci0 dev 31 function 3 Intel EP80579 SMBus rev 0x01: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbc0: using irq 12 for aux slot pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port
Re: not known intel ethernet card
Hi, Sorry for the noise, fixed in latest builds. #784 works as expected for me on same hardware. Sent from my iPhone On 16 kwi 2015, at 20:31, Holger Glaess gla...@glaessixs.de wrote: Am 16.04.2015 um 20:21 schrieb Dariusz Swiderski: Hi, Could you provide output of pcidump -v Sent from my iPhone On 16 kwi 2015, at 18:59, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi can help someone ? the 3 other intel ethernet card are also gigabit . holger # dmesg OpenBSD 5.7-current (GENERIC) #759: Wed Apr 1 14:25:18 MDT 2015 dera...@i386.openbsd.org mailto:dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042243584 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 vendor Intel, unknown product 0x5041 (class network subclass ethernet, rev 0x01) at pci3 dev 0 function 0 not configured vendor Intel, unknown product 0x5045 (class network subclass ethernet, rev 0x01) at pci3 dev 1 function 0 not configured vendor Intel, unknown product 0x5049 (class network subclass ethernet, rev 0x01) at pci3 dev 2 function 0 not configured gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel EP80579 LPC rev 0x01 ahci0 at pci0 dev 31 function 2 Intel EP80579 AHCI rev 0x01: msi, AHCI 1.1 ahci0: port 0: 3.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: ATA, TOSHIBA MK6037GS, DL34 SCSI3 0/direct fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT sd0: 57231MB, 512 bytes/sector, 117210240 sectors ichiic0 at pci0 dev 31 function 3 Intel EP80579 SMBus rev 0x01: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 Intel UHCI root hub rev
Re: not known intel ethernet card
Hi, can you test the attahced diff? greets dms On Thu, 16 Apr 2015, Dariusz Swiderski wrote: Hi, more noise, iâm stupid for not noticing changed pci dev idâs. Expect a diff. greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 16 kwi 2015, at 21:55, Dariusz Swiderski sfi...@sfires.net wrote: Hi, Sorry for the noise, fixed in latest builds. #784 works as expected for me on same hardware. Sent from my iPhone On 16 kwi 2015, at 20:31, Holger Glaess gla...@glaessixs.de wrote: Am 16.04.2015 um 20:21 schrieb Dariusz Swiderski: Hi, Could you provide output of pcidump -v Sent from my iPhone On 16 kwi 2015, at 18:59, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi can help someone ? the 3 other intel ethernet card are also gigabit . holger # dmesg OpenBSD 5.7-current (GENERIC) #759: Wed Apr 1 14:25:18 MDT 2015 dera...@i386.openbsd.org mailto:dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042243584 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 vendor Intel, unknown product 0x5041 (class network subclass ethernet, rev 0x01) at pci3 dev 0 function 0 not configured vendor Intel, unknown product 0x5045 (class network subclass ethernet, rev 0x01) at pci3 dev 1 function 0 not configured vendor Intel, unknown product 0x5049 (class network subclass ethernet, rev 0x01) at pci3 dev 2 function 0 not configured gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision
Re: not known intel ethernet card
Hi, more noise, iâm stupid for not noticing changed pci dev idâs. Expect a diff. greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 16 kwi 2015, at 21:55, Dariusz Swiderski sfi...@sfires.net wrote: Hi, Sorry for the noise, fixed in latest builds. #784 works as expected for me on same hardware. Sent from my iPhone On 16 kwi 2015, at 20:31, Holger Glaess gla...@glaessixs.de wrote: Am 16.04.2015 um 20:21 schrieb Dariusz Swiderski: Hi, Could you provide output of pcidump -v Sent from my iPhone On 16 kwi 2015, at 18:59, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi can help someone ? the 3 other intel ethernet card are also gigabit . holger # dmesg OpenBSD 5.7-current (GENERIC) #759: Wed Apr 1 14:25:18 MDT 2015 dera...@i386.openbsd.org mailto:dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042243584 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 vendor Intel, unknown product 0x5041 (class network subclass ethernet, rev 0x01) at pci3 dev 0 function 0 not configured vendor Intel, unknown product 0x5045 (class network subclass ethernet, rev 0x01) at pci3 dev 1 function 0 not configured vendor Intel, unknown product 0x5049 (class network subclass ethernet, rev 0x01) at pci3 dev 2 function 0 not configured gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel EP80579 LPC rev 0x01 ahci0 at pci0 dev 31 function 2 Intel EP80579 AHCI rev 0x01: msi, AHCI 1.1 ahci0: port 0: 3.0Gb/s
Re: not known intel ethernet card
I think this was broker by dlg@ recent commit, one that I had no chance to test. Will work on the diff. Sent from my iPhone On 16 kwi 2015, at 20:31, Holger Glaess gla...@glaessixs.de wrote: Am 16.04.2015 um 20:21 schrieb Dariusz Swiderski: Hi, Could you provide output of pcidump -v Sent from my iPhone On 16 kwi 2015, at 18:59, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi can help someone ? the 3 other intel ethernet card are also gigabit . holger # dmesg OpenBSD 5.7-current (GENERIC) #759: Wed Apr 1 14:25:18 MDT 2015 dera...@i386.openbsd.org mailto:dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042243584 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 vendor Intel, unknown product 0x5041 (class network subclass ethernet, rev 0x01) at pci3 dev 0 function 0 not configured vendor Intel, unknown product 0x5045 (class network subclass ethernet, rev 0x01) at pci3 dev 1 function 0 not configured vendor Intel, unknown product 0x5049 (class network subclass ethernet, rev 0x01) at pci3 dev 2 function 0 not configured gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel EP80579 LPC rev 0x01 ahci0 at pci0 dev 31 function 2 Intel EP80579 AHCI rev 0x01: msi, AHCI 1.1 ahci0: port 0: 3.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: ATA, TOSHIBA MK6037GS, DL34 SCSI3 0/direct fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT sd0: 57231MB, 512 bytes/sector, 117210240 sectors ichiic0 at pci0 dev 31 function 3 Intel EP80579 SMBus rev 0x01: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 Intel UHCI root hub
Re: not known intel ethernet card
hi Am 16.04.2015 um 21:16 schrieb Dariusz Swiderski: hi yes i will do today , i et you know if done. holger Hi, can you test the attahced diff? greets dms On Thu, 16 Apr 2015, Dariusz Swiderski wrote: Hi, more noise, i’m stupid for not noticing changed pci dev id’s. Expect a diff. greets -- Maciej 'sfires' Swiderski --- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 16 kwi 2015, at 21:55, Dariusz Swiderski sfi...@sfires.net wrote: Hi, Sorry for the noise, fixed in latest builds. #784 works as expected for me on same hardware. Sent from my iPhone On 16 kwi 2015, at 20:31, Holger Glaess gla...@glaessixs.de wrote: Am 16.04.2015 um 20:21 schrieb Dariusz Swiderski: Hi, Could you provide output of pcidump -v Sent from my iPhone On 16 kwi 2015, at 18:59, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi can help someone ? the 3 other intel ethernet card are also gigabit . holger # dmesg OpenBSD 5.7-current (GENERIC) #759: Wed Apr 1 14:25:18 MDT 2015 dera...@i386.openbsd.org mailto:dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042243584 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 vendor Intel, unknown product 0x5041 (class network subclass ethernet, rev 0x01) at pci3 dev 0 function 0 not configured vendor Intel, unknown product 0x5045 (class network subclass ethernet, rev 0x01) at pci3 dev 1 function 0 not configured vendor Intel, unknown product 0x5049 (class network subclass ethernet, rev 0x01) at pci3 dev 2 function 0 not configured gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel EP80579 LPC
Re: not known intel ethernet card
Am 16.04.2015 um 20:21 schrieb Dariusz Swiderski: Hi, Could you provide output of pcidump -v Sent from my iPhone On 16 kwi 2015, at 18:59, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi can help someone ? the 3 other intel ethernet card are also gigabit . holger # dmesg OpenBSD 5.7-current (GENERIC) #759: Wed Apr 1 14:25:18 MDT 2015 dera...@i386.openbsd.org mailto:dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF real mem = 1072041984 (1022MB) avail mem = 1042243584 (993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version ANSA 3020 R01 Jul,2,2009 date 07/06/2009 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) HUB0(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EPA1) acpiprt2 at acpi0: bus -1 (BR10) acpiprt3 at acpi0: bus -1 (BR11) acpiprt4 at acpi0: bus -1 (BR12) acpiprt5 at acpi0: bus -1 (BR13) acpiprt6 at acpi0: bus -1 (BR14) acpiprt7 at acpi0: bus 3 (P0P1) acpiprt8 at acpi0: bus -1 (PEX0) acpiprt9 at acpi0: bus -1 (PEX1) acpiprt10 at acpi0: bus -1 (PEX2) acpiprt11 at acpi0: bus -1 (PEX3) acpiprt12 at acpi0: bus -1 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature is 75 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel EP80579 Host rev 0x01 Intel EP80579 Memory rev 0x01 at pci0 dev 0 function 1 not configured Intel EP80579 EDMA rev 0x01 at pci0 dev 1 function 0 not configured ppb0 at pci0 dev 2 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 ppb1 at pci0 dev 3 function 0 Intel EP80579 PCIE rev 0x01: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 4 function 0 Intel EP80579 rev 0x01 pci3 at ppb2 bus 3 vendor Intel, unknown product 0x5041 (class network subclass ethernet, rev 0x01) at pci3 dev 0 function 0 not configured vendor Intel, unknown product 0x5045 (class network subclass ethernet, rev 0x01) at pci3 dev 1 function 0 not configured vendor Intel, unknown product 0x5049 (class network subclass ethernet, rev 0x01) at pci3 dev 2 function 0 not configured gcu0 at pci3 dev 3 function 0 Intel EP80579 GCU rev 0x01 Intel EP80579 CANbus rev 0x01 at pci3 dev 4 function 0 not configured Intel EP80579 CANbus rev 0x01 at pci3 dev 5 function 0 not configured Intel EP80579 Serial rev 0x01 at pci3 dev 6 function 0 not configured Intel EP80579 1588 rev 0x01 at pci3 dev 7 function 0 not configured Intel EP80579 LEB rev 0x01 at pci3 dev 8 function 0 not configured vendor Intel, unknown product 0x502d (class processor subclass Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 10 function 0 not configured vendor Intel, unknown product 0x504c (class processor subclass Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured Intel EP80579 Reserved rev 0x01 at pci3 dev 12 function 0 not configured uhci0 at pci0 dev 29 function 0 Intel EP80579 USB rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 Intel EP80579 USB rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 Intel EP80579 LPC rev 0x01 ahci0 at pci0 dev 31 function 2 Intel EP80579 AHCI rev 0x01: msi, AHCI 1.1 ahci0: port 0: 3.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: ATA, TOSHIBA MK6037GS, DL34 SCSI3 0/direct fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT sd0: 57231MB, 512 bytes/sector, 117210240 sectors ichiic0 at pci0 dev 31 function 3 Intel EP80579 SMBus rev 0x01: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port
